MrEditor97
8fa18ca7c7
Support for MCP9600 Thermocouple Amplifier ( #3700 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-25 15:49:31 +12:00
Jesse Hills
b854e17995
Initial bluetooth_proxy support ( #3736 )
2022-08-25 07:13:44 +12:00
Keith Burzinski
fc15ddfa91
Add dps310 sensor support ( #3704 )
...
Co-authored-by: Greg Arnold <greg@arnoldassociates.com>
2022-08-19 07:49:35 +12:00
functionpointer
5561d4eaeb
hydreon_rgxx: Support lens_bad, em_sat and temperature ( #3642 )
2022-08-17 16:07:33 +12:00
rbaron
1a524a5a50
Makes ble_client.ble_write's action value templatable ( #3715 )
2022-08-16 14:40:58 +12:00
puuu
0688deca6b
Add support for pvvx mithermometer display via ble client ( #3333 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-15 10:56:25 +12:00
Adrián Panella
4d56a975e6
Create feedback cover component ( #3253 )
2022-08-09 17:21:27 +12:00
anatoly-savchenkov
ac10e27f08
[Nextion] Add on_page trigger ( #3673 )
2022-08-09 12:44:20 +12:00
Keith Burzinski
e2cddf1005
Sprinkler controller component ( #2249 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-09 12:19:42 +12:00
Ian Blais
ced423748e
Adding support for Whynter ARC-14S/SH Air Conditioners ( #3641 )
2022-08-09 10:49:03 +12:00
Joe
fef39b9fbe
Refactor BedJet climate into Hub component ( #3522 )
2022-08-09 10:14:37 +12:00
rbaron
baad92515b
Introduces ble_client.ble_write Action ( #3398 )
2022-08-08 12:59:55 +12:00
Keith Burzinski
522646c64d
Extend ST7789V component to support additional displays ( #3651 )
...
Co-authored-by: definitio <37266727+definitio@users.noreply.github.com>
2022-08-08 07:54:48 +12:00
piechade
2a49811f6e
Add support for SMT100 Soil Moisture Sensor ( #3654 )
...
Co-authored-by: Dennis Piecha <d.piecha@ymail.com>
2022-07-28 11:22:49 +12:00
Jesse Hills
bca96f91b2
Remove min_save_interval from intergration and total_daily_energy ( #3498 )
2022-06-30 16:47:56 +12:00
Nick B
fb2467f6f0
DAC7678 support ( #3441 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-21 17:12:15 +12:00
Sergey Dudanov
b0c0258e70
Media Player: added play_media action ( #3579 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-20 12:17:20 +12:00
Sergey Dudanov
d045908e05
Media Player: added triggers ( #3576 )
2022-06-18 17:21:42 +12:00
Jesse Hills
8998c5f6dd
Implement media player volume actions ( #3551 )
2022-06-13 13:28:55 +12:00
jimtng
4f57bf786b
Add mqtt.on_connect and mqtt.on_disconnect triggers ( #3520 )
2022-06-03 13:51:50 +12:00
Jesse Hills
6221f6d47d
Implement Media Player and I2S Media player ( #3487 )
2022-06-02 17:00:17 +12:00
jimtng
5aa42e5e66
Add variable substitutions for !include ( #3510 )
2022-05-31 16:45:18 +12:00
Joe
708672ec7e
[BedJet] Add configurable heating strategy ( #3519 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-31 15:45:01 +12:00
Sergey Dudanov
7092f7663e
midea: New power_toggle action. Auto-use remote transmitter. ( #3496 )
2022-05-23 20:51:45 +12:00
Martin
0ed7db979b
Add support for SGP41 ( #3382 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:47:33 +12:00
Maxim Ocheretianko
f62d5d3b9d
Add Tuya select ( #3469 )
2022-05-16 07:49:40 +12:00
Maxim Ocheretianko
0665acd190
Tuya status gpio support ( #3466 )
2022-05-16 07:44:14 +12:00
Jesse Hills
40ad9f4911
Add deep_sleep.allow YAML action ( #3459 )
2022-05-11 12:47:50 +12:00
Jesse Hills
b7e52812f8
Fix tests ( #3455 )
2022-05-10 22:02:58 +12:00
Matthew Garrett
98c733108e
PMSX003: Add support for specifying the update interval and spinning down ( #3053 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-05-10 21:35:43 +12:00
Martin
782186e13d
extend scd4x ( #3409 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:25:44 +12:00
George
4e1f6518e8
Delonghi Penguino PAC W120HP ir support ( #3124 )
2022-05-10 21:22:22 +12:00
Martin
0e547390da
add support for Sen5x sensor series ( #3383 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 20:15:02 +12:00
Maurice Makaay
d9caab4108
Number enhancement ( #3429 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 16:58:56 +12:00
Maurice Makaay
44b68f140e
Select enhancement ( #3423 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-10 16:41:16 +12:00
Ingo Theiss
50a32b387e
Add ENS210 Humidity & Temperature sensor component ( #2942 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:23:38 +12:00
rainero84
2059283707
Early pin init ( #3439 )
...
* Added early_pin_init configuration parameter for ESP8266 platform
* Added #include to core
* Updated test3.yaml to include early_pin_init parameter
Co-authored-by: Rainer Oellermann <ro@playplaycode.com>
2022-05-09 17:21:43 +12:00
I. Tomita
7a778f3f33
Add support for BL0939 (Sonoff Dual R3 V2 powermeter) ( #3300 )
2022-04-21 10:11:25 +12:00
Joe
6bac551d9f
Add BedJet BLE climate component ( #2452 )
2022-04-14 13:16:13 +12:00
rnauber
70a35656e4
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:13:51 +12:00
anatoly-savchenkov
8b2c032da6
Add Sonoff D1 Dimmer support ( #2775 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-12 17:03:32 +12:00
Jesse Hills
da336247eb
Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 ( #3186 )
2022-04-12 16:19:16 +12:00
functionpointer
fdda47db6e
Add integration hydreon_rgxx for rain sensors by Hydreon ( #2711 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-11 14:50:56 +12:00
rrooggiieerr
9e3e34acf5
Add cover toggle support to endstop cover ( #3358 )
2022-04-11 10:55:45 +12:00
Felix Storm
2e436eae6b
CAN bus: support remote transmission request flag for canbus.send ( #3193 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:15:51 +12:00
Martin
792108686c
Add mqtt for idf ( #2930 )
...
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-04-04 11:07:20 +12:00
Stanislav Meduna
48584e94c4
Allow to set user defined characters on LCD ( #3322 )
2022-03-24 19:37:48 +13:00
andrewpc
99f5ed1461
Add support for QMP6988 Pressure sensor ( #3192 )
2022-03-15 08:09:17 +13:00
wilberforce
3b8ca80900
Webserver v2 ( #2688 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-08 15:02:24 +13:00
Sean Brogan
1d2e0f74ea
Add Mopeka BLE and Mopeka Pro Check BLE Sensor ( #2618 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-01 11:30:33 +13:00
RubyBailey
c9094ca537
Add sensor support: Honeywell ABP (SPI version) ( #3164 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
2022-02-22 11:22:30 +01:00
Arturo Casal
d1feaa935d
Add device support: MCP4728 ( #3174 )
...
* Added MCP4728 output component.
* Added tests to test1.yaml
* Added codeowners
* Lint fixes
* Implemented code review changes
* Lint fixes
* Added i2c communication check on setup()
* Fixed tests
* Lint fix
* Update esphome/components/mcp4728/mcp4728_output.cpp
Changed log function
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 12:47:03 +01:00
EdJoPaTo
69633826bb
Implement send_first_at for exponential_moving_average ( #3240 )
2022-02-21 13:13:06 +13:00
Fabian Affolter
ba785e29e9
Add support for MPU-6886 ( #3183 )
2022-02-21 12:23:26 +13:00
Otto Winter
f59dbe4a88
Add copy integration ( #3241 )
2022-02-21 09:13:37 +13:00
Otto Winter
5811389891
BH1750 dynamically calculate options ( #3214 )
...
* BH1750 dynamically calculate options
* Fix tests
* Fix NAN
* Convert setup to new-style
* Add myself as codeowner
2022-02-19 15:49:20 +01:00
Otto Winter
debcaf6fb7
Add ESP32C3 and ESP32S2 support to dashboard ( #3152 )
...
* Add ESP32C3 and ESP32S2 support to dashboard
* Format
* Fix tests
2022-02-19 15:47:50 +01:00
Tyler Bules
b8d10a62c2
ESP32-C3 deep sleep fix ( #3066 )
2022-02-19 15:13:48 +01:00
Otto Winter
34c9d8be50
Lint trailing whitespace ( #3230 )
2022-02-19 14:46:27 +01:00
Otto Winter
ae57ad0c81
Fix warning in test1.yaml ( #3228 )
2022-02-19 14:42:54 +01:00
Arturo Casal
88fbb0ffbb
Add sensor support: MAX44009 ( #3125 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:49:45 +01:00
Borys Pierov
231908fe9f
Implement text_sensor based on ble_client ( #3079 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:45:32 +01:00
ImSorryButWho
f137cc10f4
Remote magiquest protocol ( #2963 )
...
Co-authored-by: Aaron Hertz <aaron@rockforest.org>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-18 22:22:41 +01:00
Adrián Panella
8cb9be7560
Analog threshold ( #3190 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 09:14:10 +13:00
Felix Storm
38259c96c9
CAN bus: support bit mask for on_frame can_id ( #3196 )
2022-02-17 17:00:31 +13:00
Otto Winter
35e6a13cd1
Remove unused obj attribute from AssignmentExpression ( #3145 )
2022-02-09 14:56:42 +01:00
Jesse Hills
5c22065135
Change most references from hassio to ha-addon ( #3178 )
2022-02-09 23:46:20 +13:00
mckaymatthew
4aeacfd16e
Add max9611 High Side Current Shunt ADC ( #2705 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 22:56:40 +13:00
Jesse Hills
94f944dc9c
Add Lilygo t5 4.7 Touchscreen ( #3084 )
2022-02-08 21:50:25 +13:00
functionpointer
397ef72b16
MLX90393 three-axis magnetometer ( #2770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:42:11 +13:00
Jeff Eberl
ad43d6a5bc
Added RadonEye RD200 Component ( #3119 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 16:32:37 +13:00
Franck Nijhof
e7864a28a1
Add device class support to Switch ( #3012 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-04 09:04:48 +13:00
Keilin Bickar
21803607e7
Add new Lock core component ( #2958 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-04 07:24:31 +13:00
drug123
0f3d4d9a47
Add Xiaomi MHOC303 sensor e-ink clock ( #3115 )
2022-01-27 12:54:29 +13:00
Wouter van der Wal
a718ac7ee0
Add qr code support for displays ( #2952 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 22:20:45 +13:00
Jesse Hills
ef832becf1
Create base touchscreen component and refactor ektf2232 ( #3083 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 16:26:46 +13:00
Oxan van Leeuwen
6a2c58fcc0
Implement output button ( #3109 )
2022-01-25 09:30:48 +13:00
Martin
6b27f2d2cf
Remove unused polling_component_schema from modbus number ( #3108 )
2022-01-25 08:44:20 +13:00
VitaliyKurokhtin
8187a4bce9
Command retain option for MQTT component ( #3078 )
2022-01-23 21:05:37 +13:00
Pavel Skuratovich
a6a9ebfde2
slow_pwm: allow to restart a cycle on state change ( #3004 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-22 23:08:55 +01:00
William Charlton
f0b183a552
Wake-on-LAN button ( #3030 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: William Charlton <will.charlton1@icloud.com>
2022-01-23 00:13:46 +13:00
Jesse Hills
6f8c7d9ec4
Add ektf2232 touchscreen support ( #3027 )
2022-01-21 15:45:49 +13:00
Sympatron GmbH
5026bc7a78
Native ESP32 CAN support ( #1629 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-12 08:54:35 +13:00
Andreas Soehlke
27364ee72c
Add cd74hc4067 multiplexer ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: asoehlke <git@soehlke.de>
2022-01-11 16:59:57 +13:00
Chris Nussbaum
a0ea2aae6e
Add an action for pzemac to reset the total energy ( #2480 )
2022-01-10 23:13:39 +13:00
rsumner
a4431abea8
MCP3204 4-channel 12-bit ADC component ( #2895 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 12:04:48 +13:00
Sergey Dudanov
9a70bfa471
New Midea IR component, improvements and fixes ( #2847 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 11:47:19 +13:00
Valentin Ochs
b406c6403c
Create new kalman_combinator component ( #2965 )
2022-01-09 23:44:36 +01:00
Jesse Hills
ea1be8e7bf
Add MCP47A1 DAC output ( #3014 )
2022-01-08 21:35:55 +13:00
Martin
5e1e543b06
Add support for BMP388 / BMP 390 pressure and temperature sensor ( #2716 )
2022-01-06 15:01:50 +13:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Jesse Hills
33f17f75a0
Upgrade ArduinoJson to 6.18.5 and migrate code ( #2844 )
2022-01-01 22:31:43 +13:00
MrEditor97
23edb18d7e
INA260 Current and Power Sensor support ( #2788 )
2021-12-31 22:08:49 +13:00
jsuanet
f431c7402f
Add shutdown and safe_mode button ( #2918 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-12-20 22:25:36 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Frank Langtind
6ec9cfb044
Add Tuya Number support ( #2765 )
2021-12-20 14:35:10 +13:00
Petr Vraník
5d70ff702b
quantile filter support ( #2900 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: pvranik <petr.vranik@mgm-tp.com>
2021-12-15 07:43:42 +13:00
Ben Owen
cec4a81e14
Add reset_duration option for waveshare epaper HAT rev 2.1 ( #1481 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-13 10:27:11 +13:00
Jesse Hills
3d51ac8df0
Use new platform component config blocks for wizard ( #2885 )
2021-12-08 09:22:03 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
Paul Monigatti
05fe5db030
Relax the icon validator to allow non-mdi icons ( #2764 )
2021-11-23 09:21:14 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
d8e33c5a69
Add repeat action for automations ( #2538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:30:07 +13:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
Oxan van Leeuwen
f7b3f52731
Limit hostnames to 31 characters ( #2531 )
2021-10-22 12:09:47 +02:00
Oxan van Leeuwen
c0fc5b48ae
Fix pin/component switchup in SX1509 pin configuration ( #2593 )
2021-10-21 19:55:19 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
Paul Monigatti
1308236429
Revert "Added test for bme680_bsec" ( #2518 )
...
This reverts commit 7f6a50d291
2021-10-14 12:31:52 +02:00
Paul Monigatti
07b309e65d
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-14 20:58:35 +13:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Sergio Mayoral Martínez
3dee057826
Add throttle_average sensor filter ( #2485 )
2021-10-13 11:35:30 +13:00
Jesse Hills
34db9d9ef2
Add optional timeout for wait_until action ( #2282 )
2021-10-13 08:23:24 +13:00
Oxan van Leeuwen
1184bbc976
Reduce IRAM usage in test3 ( #2499 )
2021-10-13 08:22:38 +13:00
Rob Deutsch
a3eb2a7ee0
Added heatpumpir support ( #1343 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-13 07:38:19 +13:00
Chris Nussbaum
b4f57972fb
Add on_open and on_closed triggers to cover ( #2488 )
2021-10-12 15:39:21 +13:00
definitio
42739f0b22
Add configuration for climate topics ( #2473 )
2021-10-10 17:55:22 +02:00
definitio
a1f9b0d7f2
Add configuration for cover topics ( #2472 )
2021-10-10 17:54:07 +02:00
Paul Monigatti
471b82f727
EntityBase Refactor ( #2418 )
...
* Renamed Nameable to EntityBase (cpp)
* Renamed NAMEABLE_SCHEMA to ENTITY_BASE_SCHEMA (Python)
* Renamed cg.Nameable to cg.EntityBase (Python)
* Remove redundant use of CONF_NAME from esp32_touch
* Remove redundant use of CONF_NAME from mcp3008
* Updated test
* Moved EntityBase from Component.h and Component.cpp
* Added icon property to EntityBase
* Added CONF_ICON to ENTITY_BASE_SCHEMA and added setup_entity function to cpp_helpers
* Added MQTT component getters for icon and disabled_by_default
* Lint
* Removed icon field from MQTT components
* Code generation now uses setup_entity to setENTITY_BASE_SCHEMA fields
* Removed unused import
* Added cstdint include
* Optimisation: don't set icon if it is empty
* Remove icon from NumberTraits and SelectTraits
* Removed unused import
* Integration and Total Daily Energy sensors now inherit icons from their parents during code generation
* Minor comment correction
* Removed redundant icon-handling code from sensor, switch, and text_sensor
* Update esphome/components/tsl2591/tsl2591.h
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Added icon property to binary sensor, climate, cover, and fan component tests
* Added icons for Binary Sensor, Climate, Cover, Fan, and Light to API
* Consolidated EntityBase fields in MQTT components
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-10 10:37:05 +02:00
Paul Monigatti
955c96731e
Add Safe Mode Restart Switch ( #2437 )
2021-10-06 20:44:48 +13:00
NMC
877367677b
Add support for Airthing Wave Mini ( #2440 )
2021-10-05 11:56:34 +13:00
Maurice Makaay
c89018a431
Option to ignore CRC for EFuse MAC address ( #2399 )
...
* Accept changes as proposed by black.
* Added test and implemented optional correctly.
* Disable PHY RF full calibration (because it calls the breaking MAC retrieval function).
* Disable CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE instead of enable, dummy!
* Rename CONF_IGNORE_EFUSE_MAC_CRC to CONF_ESP32_IGNORE_EFUSE_MAC_CRC.
* Removed unused import.
* Fix ordering of constants.
* Moved all MAC address logic to core helpers.
* Use pretty MAC address for the log.
* Use standard MAC formatter function for debug component.
* Fix clang-formatting.
* Fix clang-formatting.
* Brought wording of comments in line with other function-describing comments.
* Processed code review by @OttoWinter
* Add USE_ESP32_IGNORE_EFUSE_MAC_CRC to defines.h
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-30 18:08:15 +02:00
Marek Marczykowski-Górecki
c26ea7e4e0
Tuya: add cover component ( #2279 )
2021-09-29 10:02:13 +13:00
Stephen Tierney
af04f565cf
Add support for SCD4X ( #2217 )
...
* Initial commit
* clang-format fixes
* Update CODEOWNERS
* clang-format fixes
* Fix merge error
* Fix missing return
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-28 22:10:25 +02:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
Martin
7672ba2c8d
Modbus controller ( #1779 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-27 09:27:24 +13:00
rbaron
95a6715b2b
Adds light sensor support for b-parasites ( #2391 )
2021-09-25 13:16:27 +02:00
ZJY
66761ff340
Add SSD1305 support to SSD1306 integration along with few new options ( #1902 )
...
* Add serveral options for SSD1306 integration
* Add SSD1305 support
(SSD1305 is similar to SSD1306, it seems SSD1305 has
brightness and color register but does not have charge pump)
* Add some description when manipulating registers
* Add flip, offset and invert option to get more compatibility
with various display modules
* Fix typo `setup_ssd1036' -> `setup_ssd1306'
* Add SSD1306 brightness validation tip
* Add more description, limit offset range
* Changes according to linter
* Fix test
* Raise error instead of using warning
* Fix wrong logic
* Remove logger
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Remove logging import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-22 13:47:41 +02:00
