* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* #550 Proactive fix for STS3x component reporting WARNING status and reinitialzing similar to SHT3xd
* Flattened config.
* Fixed missing temperature unit
* Code formatting
* Added marking for future commands
* Cleanup
* Removed whitespace
* Cleanup
* Cleanup
* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* Add support for Sensirion SHTC1 and SHTC3 Temperature sensors
* Fixed the test
* Fix lint issues
* Update esphome/components/shtcx/shtcx.cpp
Good point.
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Refactored device type identification and logging
* Refactoring and cleanup
* Remove sts3x
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add support for SGP30 eCO2 and TVOC sensors
* Added test for SGP30
* Lint issues fixed
* Lint fixes
* Fixed light lengths
* Cleanup
* Add support for Sensirion SCD30 CO2 sensors
* Fixed few lint issues
* Lint fixes
* Fixed line ending for lint
* Cleanup
* Refactored float conversion
* Refactor unnecessary return
* Refactoring and cleanup
* Updated uptime_sensor_ referencing and simplified checking on availability of copensation
* Temperature and Humidity source moved to a separate compensation block; Dependency for Uptime sensor removed.
* Both humidity_source and temperature_source are now mandatory if the compensation block is defined;
* Clean up
* Cleanup
* Cleanup in search of perfection
* Use correct comment style
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add ssd1325 component
* fix i2c
* remove ssd1325 i2c
* add test
* set max contrast
* No macros - see styleguide
* Remove invalid function
* Formatting
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add support for climate action:
Following hass implementation of climate, action represents the current action the climate device is perfoming, e.g. cooling or heating
fix bang_bang climate:
make sure that the thresholds are always respected.
fixes the issue where the component would just keep on heating, regardless of the temperature range
* Updates
- Use dedicated enum for action (otherwise it gets confusing because "auto" is not a valid action)
- Add field to tell HA that action is supported
- Revert semantic changes in bang_bang
* Conditional print
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add ClimateIR
* update climate ir
* update class comment
* lint
* moved to climate_ir
* fix include path
* use climateir
* updates
* update include path
* lint
* fixed variable assigned to itself
I'm facing some occasional timeouts when reading BME280.
Looking at Adafruit driver (that this code is based on), I see that base math is using 1.25ms, increased by 2.3*oversampliing + 0.575 for each value being read.
I've added 1.5ms as baseline, to be on the same safe.
* Add support for TTGO ePaper module
Use 2.13in-ttgo as type. Only different LUTs were needed, everything else is the same.
relates to issue #233.
* fix styling errors
* styling fixes
Co-authored-by: null <mandy.klingbeil@student.hpi.uni-potsdam.de>
* refactored xiaomi sensors
* fix lint
* fixed and added tests
* fix namespace
* LYWSD02 has no battery level
* fixed enum
* fix
* fix case
* fix spaces in empty line...
* inform users of old sensors about the change
* Fix for PCF8574 output chattering at the start/reboot
* Fix for PCF8574 output chattering at the start/reboot
* Fix for PCF8574 output chattering at the start/reboot
Co-authored-by: Amish Vishwakarma <vishwakarma.amish@gmai.com>
* Add support for TI TLC59208F
The chip is a 8-BIT FM+ I2C BUS LED DRIVER with
8 open-drain output channels.
Its features include:
- 256 linear levels
- group dimming
- group blinking
- 64 slave addresses
- customizable sub addresses and all call address
- output update on stop or on ACK
- 3.3V or 5V supply with 5V tolerant IO
- no glitch startup
- 50mA / output continuous current up to 17V
* Convert macro to uint8_t
Variables had to be renamed, clang-format would protest against
mixed case in global variable name.
* Change gen-call reset to use the correct i2c bus
* added ANALOG_OUTPUT as first functionality
* added gpio
* seperated the code for different functions
* fixed code
* Revert "fixed code"
This reverts commit 0c6eacb225.
* add timings for breathe and blink
* made the sx1509_float_output am output component
* add keypad
* implementation for sx1509 keypad
* keypad code cleanup and first device tests
* debounce
* keypad working now.
* update for timings.
does not compile yet
* added all options for breathe and blink
fixed var namings
* blink and breath still not ok
* fixed ms for timings
* sync with repo
* fixed issue with gpio pin output
* code cleanup
* lint
* more lint
* remove log from header
* Update esphome/components/sx1509/__init__.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* review
* feedback
* fixed review issues
did some extended testing with mqtt spy
* code cleanup (comments)
* fixed row col swap for binarysensor_keypad
* flake and lint
* travis
* travis
* travis
* Update esphome/components/sx1509/sx1509.cpp
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* review
* separated platforms
* code cleanup
* travis relative paths in python
* remove blink/breathe
code cleanup
* cpp lint
* feedback
* travis
* lint line to long
* check keypad settings to be valid
* clang
* keypad config
* text
* Remove wrong .gitignore from .gitignore
* Remove .pio folder from .gitignore (merge)
* Formatting
* Formatting
* Add i2c log in dump_config
* Remove unused variables
* Disable static for header files
We don't need internal linkage
* Use consistent member default argument style
* Run clang-format
Co-authored-by: null <m.vanturnhout@exxellence.nl>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Basic auth
* Test
* Linter fix
* Make username/password strict strings
Reason: passwords only consisting of digits (012345) will be silently converted (to "12345")
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add nexa remote support.
This is inspired by: https://github.com/sui77/rc-switch/pull/124
As described there: "The remotes sold in ClasOhlson in scandinavia have
a slightly longer sync sequence(added a skip pulse field in the
protocol) and a 64 bit code word. Part of the code gets lost but that
seems to be OK until support for 64 bit codes is added."
* add default value to ctor
* allow 64bit codes
* lint
* make vars 64 bits
* add has built in endstop
* rewrite as proposed
* Update esphome/components/time_based/time_based_cover.h
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* lint
* Re trigger stop_operation if stop called
* allow se triggering open/close command if safe
* using COVER_OPEN/CLOSE constants
* add xiaomi BLE Thermometer lywsd02 model support
* remove battery level
* Update sensor.py
to pass the lint test
https://github.com/esphome/esphome/pull/664
* fix trailing space
Co-authored-by: Guoxue <gx@m15.cn>
Co-authored-by: mr G1K <mr@g1k.ru>
* Allow configuration to enable or disable automatic baseline calibration on boot
* Add actions to enable or disable automatic baseline calibration
* Add action to calibrate zero point
* Fix mqtt_text_sensor to honor unique_id when set.
* Remove setting of unique_id in json tree, as the mqtt_component already does this, and in fact overrides what we do here.
* Add unqiue_id() and dump_config() to the wifi_info sensors.
* Erase all flash for USB uploads on ESP8266s
Previously, only erased "write regions".
Downside: Config for other FWs like tasmota could be affected
Upside: Potentially fixes some ESP8266 connection issues
Related: https://github.com/esphome/issues/issues/455#issuecomment-503524479
* Clear WiFi settings for ESP8266
Clears wifi settings from retained storage on ESP8266 (if set).
Unsure if this is the actual issue, but it won't cause problems either.
* Update wifi_component_esp8266.cpp
* Revert erase chip for testing
* Improve wait_time calculation
* Adding bitmask to narrow compare of received codes
Updated test to add mask configuration
* Lint
* Handle bitmask as ignore characters per review comment
* Fixed test to cover ignore bits
* Lint
* Eliminate separate set_mask method per review comment
* Provide the lights current color to the addressable_lambda_effect.
* Fix formatting
* More formatting
* Change the call signature of the lambda
* lint
Co-authored-by: olg <x>
* Enabling tilt control in the template cover
Added test
Add tilt option to publish action
* Added CONF_TILT to alidation schema per comment
* Removed default for CONF_TILT
* Atmel M90E32AS Energy Metering IC. Found in CircuitSetup 2can and 6chan energy meters
* fix style bugs
* Update esphome/components/atm90e32/atm90e32.cpp
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Properly put atm90e32_reg in namespace
* Use phase grouped config like ina3221
* Log why the component is marked failed, did not read back our register value
* 32bit register reads are 2s compliment
* Fix atm90e32 option name in test
* clang-format changes from travis-ci
* use new protected method names
* Whitespace changes to please Travis
* Update esphome/components/atm90e32/atm90e32.cpp
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Fix up type change for val_h/val_l
* Remove conditions around values with defaults
* Rename constants to match their value
* Remove 2's complement check
Co-authored-by: Andrew Thompson <andrew@whosonlocation.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added scan_length to AddressableScanEffect (allow more than one LED)
* Added check for scan length being longer than addressable light
* Added config option 'scan_length' to AddressableScanEffect (default: 1)
* Renamed scan_length to scan_width, removed erroneous length check
* Fixed indentation issue in addressable_light_effect.h
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* clear and disable editor while fetching contents
* semicolon
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* semicolon
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Add backlight handling for lcd_pcf8574
Switch the backlight on or off by calling id(mydisplay).backlight()
or id(mydisplay).no_backlight() in lamda functions (assuming mydisplay
is the custom id for the LCD).
* Use abstract method
Co-authored-by: Attila Darazs <attila@darazs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add CT Clamp component
* Update lint
* Some more fixes
* Make updates to work as an analog sensor consumer
* Remove unused imports
Update lint suggestions
* Move setup_priority to header
* Remove unused calibration value
* Remove Unique ID
- Will be auto generated
* Update to use loop and not slow down main loop
Co-authored-by: Otto Winter <otto@otto-winter.com>
* added download, edit and retry buttons to upload modal
* changed hide for disabled, resorted buttons
* moved upload action buttons to menu
* button changes
moved edit button from menu in upload modal
swapped validation button for upload in edit modal
* add binary_sensor_map c code
* add python file
* fixed python and C++ code for new framework
* renamed add_sensor to add_channel
* travis
* Updates
- Use struct for channels_ array - heap allocation is not really necessary here.
- any_active can also be written as mask != 0
- Update setup priority to DATA
- Use shorter TAG (name is already long; not important)
- Quotes around name
- Add icon to sensor
- Use new cv.typed_schema
- Change CONF_CHANNEL to CONF_BINARY_SENSOR - makes it clearer that this option accepts a binary sensor (and not for example an int)
- Add test
Co-authored-by: Otto Winter <otto@otto-winter.com>
Fixes https://github.com/esphome/issues/issues/307
Only enters deep sleep mode when node turns off - not between updates because entering+exiting deep sleep takes some time (could be added later)
* added link from dashboard to web server, if configured
* linter fixes
* simplified integration lookup
* included loaded_integration in storage json
* included loaded_integration in storage json
* fixed loaded_integrations
plus linter changes
* fixed comment: List
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* return empty list
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* convert to list
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* default to empty list on missing loaded_integrations
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* None check no longer needed
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* None check no longer needed
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* removed newline
* Lint
* add coolix climate ❄ 🔥
* Fixes
* Reviewed
* Fix for dev
ClimateDevice was renamed to Climate
* Remove stale method
* Lint
* Initialize target temperature, avoid NAN value
* Use clamp and round value
* Set to verbose message
Not really relevant to the user
* Remove constructor
Name is now set in climate.register_climate - saves integrations from having to declare a constructor
* Fix, add test
Co-authored-by: Otto Winter <otto@otto-winter.com>
fixes the following error if rx_only was defined and update_interval
was not present:
Failed config
sensor.sds011: [source sds011.yaml:62]
update_interval has no effect in rx_only mode. Please remove it.
missing definition of GPIOPin:
In file included from src/esphome/components/my9231/my9231.cpp:1:0:
src/esphome/components/my9231/my9231.h:13:19: error: 'GPIOPin' has not been declared
void set_pin_di(GPIOPin *pin_di) { pin_di_ = pin_di; }
^
src/esphome/components/my9231/my9231.h:14:21: error: 'GPIOPin' has not been declared
void set_pin_dcki(GPIOPin *pin_dcki) { pin_dcki_ = pin_dcki; }
^
src/esphome/components/my9231/my9231.h:51:3: error: 'GPIOPin' does not name a type
GPIOPin *pin_di_;
^
src/esphome/components/my9231/my9231.h:52:3: error: 'GPIOPin' does not name a type
GPIOPin *pin_dcki_;
^
* Added save & validate button in editor window
It felt a bit cumbersome to save&close the editor window, then click the validate button, see an error, locate your device from the list and open the editor again. Now it is possible to save&validate a configuration without leaving the editor.
* Changed modal behavior to close one before the other
* set data-node dynamically
* show upload button on successful validation
* Use disabled class
* Update index.html
* Fix mistake
Co-authored-by: Otto Winter <otto@otto-winter.com>
