Martin
6fe22a7e62
SPS30: Add fan action ( #3410 )
...
* Add fan action to SPS30
* add codeowner
2022-04-26 09:50:36 +12:00
I. Tomita
7a778f3f33
Add support for BL0939 (Sonoff Dual R3 V2 powermeter) ( #3300 )
2022-04-21 10:11:25 +12:00
Jesse Hills
ad41c07a1f
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 16:35:42 +12:00
James Duke
9576d246ee
Add support for Mopeka Pro+ Residential sensor ( #3393 )
...
* Add support for Pro+ Residential sensor (enum)
The Mopeka Pro+ Residential sensor is very similar to the Pro sensor, but includes a longer range antenna, and maybe hardware? The Pro+ identifies itself with 0x08 sensor type.
* Add logic to support Pro+ Residential sensor
* Fix formatting
2022-04-20 12:50:24 +12:00
parats15
988d3ea8ba
Multi conf for Teleinfo component ( #3401 )
2022-04-20 12:46:55 +12:00
Jesse Hills
0767b92b62
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 06:56:09 +12:00
rnauber
9283559c6b
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 12:33:38 +12:00
Michel van de Wetering
6b393438e9
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 12:33:38 +12:00
rnauber
2064abe16d
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 08:43:34 +12:00
Michel van de Wetering
b605982f94
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 08:42:02 +12:00
Janez Troha
2243021b58
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:48:35 +12:00
rnauber
d5134e88b1
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:48:35 +12:00
matthias882
c59adf612f
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 13:48:35 +12:00
Janez Troha
93b628d9a8
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:42:43 +12:00
Joe
6bac551d9f
Add BedJet BLE climate component ( #2452 )
2022-04-14 13:16:13 +12:00
rnauber
70a35656e4
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:13:51 +12:00
Jesse Hills
047c18eac0
Add default object_id_generator for mqtt ( #3389 )
2022-04-14 11:25:31 +12:00
matthias882
b4a86ce6cf
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 09:36:16 +12:00
Jesse Hills
a9b5e8d036
Merge branch 'dev' into bump-2022.4.0b1
2022-04-13 13:42:27 +12:00
Jesse Hills
8be704e591
Allow specifying deep sleep wakup clock time ( #3312 )
2022-04-13 12:55:26 +12:00
Jesse Hills
b622a8fa58
Move PN532OnTagTrigger to nfc::NfcOnTagTrigger ( #3379 )
2022-04-13 12:26:55 +12:00
Martin
d620b6dd5e
Refactor Sensirion Sensors ( #3374 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:19:48 +12:00
Janez Troha
99335d986e
Use correct http defines ( #3378 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:14:21 +12:00
cvwillegen
7895cd92cd
Remote base pronto receive ( #2826 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 07:39:38 +12:00
anatoly-savchenkov
8b2c032da6
Add Sonoff D1 Dimmer support ( #2775 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-12 17:03:32 +12:00
Jesse Hills
da336247eb
Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 ( #3186 )
2022-04-12 16:19:16 +12:00
andrewpc
dabd27d4be
Addition of Deep Sleep RTC pin definition for ESP32-S2 ( #3303 )
2022-04-12 12:45:54 +12:00
functionpointer
fdda47db6e
Add integration hydreon_rgxx for rain sensors by Hydreon ( #2711 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-11 14:50:56 +12:00
Jesse Hills
efa6fd03e5
Make home_assistant imported sensors internal by default ( #3372 )
2022-04-11 12:45:15 +12:00
rrooggiieerr
9e3e34acf5
Add cover toggle support to endstop cover ( #3358 )
2022-04-11 10:55:45 +12:00
calco88
a2d0c1bf18
Fix HM3301 AQI int8 overflow ( #3361 )
2022-04-11 10:14:53 +12:00
RadekHvizdos
2b91c23bf3
Extend mcp3204 to support 8 channels (mcp3208 variant) ( #3332 )
2022-04-11 08:44:11 +12:00
Samuel Sieb
3297267a16
Fix SHTC3 sensor detection ( #3365 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-04-11 08:42:31 +12:00
Keilin Bickar
a9e653724c
Add parameter to control i2c stop signal at endTransmission ( #3370 )
2022-04-11 08:38:29 +12:00
djwlindenaar
5e79a1f500
Implement newer RTU protocol of Growatt inverters ( #3315 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Daniel Lindenaar <daniel-git@lindenaar.eu>
2022-04-11 08:06:11 +12:00
Tim Smeets
d4ff98680a
Add support for Electrolux heatpump and bump arduino-heatpumpir version ( #3353 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-08 08:04:00 +12:00
Jesse Hills
ba8d255cb4
Allow on_value_range for sensor and number to be templated ( #3359 )
2022-04-05 22:06:36 +12:00
Michiel van Turnhout
70fafa473b
Tm1637 binarysensor ( #2792 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:42:10 +12:00
Felix Storm
2e436eae6b
CAN bus: support remote transmission request flag for canbus.send ( #3193 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:15:51 +12:00
Andrew J.Swan
fd7e861ff5
Added a function to load custom characters in LCD display ( #3279 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:13:59 +12:00
Martin
792108686c
Add mqtt for idf ( #2930 )
...
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-04-04 11:07:20 +12:00
Branden Cash
fa1b5117fd
feat: support ble_client that use security w/o pin codes ( #3320 )
2022-04-04 09:35:48 +12:00
Adrián Panella
b0bd9e0a34
protobuf: fix incomplete 64 bits implementation ( #3341 )
2022-04-04 08:38:44 +12:00
Guillermo Ruffino
05dc97099a
New vscode schema gen ( #3336 )
2022-04-03 19:30:22 +12:00
Ian Reinhart Geiser
9de61fcf58
Define touchscreen support when in use. ( #3296 )
2022-04-01 16:46:39 +13:00
Jesse Hills
7f7175b184
Publish custom data when modbus number lambda fills vector ( #3295 )
2022-03-29 22:22:11 +13:00
Dan Jackson
cf5c640ae4
Change beginning of file comments to avoid creating doxygen tag for esphome namespace ( #3314 )
2022-03-29 22:05:38 +13:00
Jesse Hills
6b9371d105
Actually increase request memory for json parsing ( #3331 )
2022-03-28 17:04:25 +13:00
Otto Winter
9a82057303
Font allow using google fonts directly ( #3243 )
2022-03-28 12:07:48 +13:00
Stanislav Meduna
48584e94c4
Allow to set user defined characters on LCD ( #3322 )
2022-03-24 19:37:48 +13:00
H. Árkosi Róbert
2034ab4f6c
increase delay for Ethernet module warm up ( #3326 )
2022-03-24 14:28:21 +13:00
Jesse Hills
58b70b42dd
Add small delay before setting up app in safe mode ( #3323 )
2022-03-23 11:12:22 +13:00
Jesse Hills
1496bc1b07
Reserve less memory for json ( #3289 )
2022-03-23 09:46:25 +13:00
Jesse Hills
bfbf88b2ea
Webserver utilize Component Iterator to not overload eventstream ( #3310 )
2022-03-23 09:45:05 +13:00
wysiwyng
e621b938e3
Fix WDT reset during dallas search algorithm ( #3293 )
2022-03-16 20:33:05 +01:00
Jesse Hills
756f71c382
Allow custom register type for modbus number ( #3202 )
2022-03-16 14:06:00 +13:00
stegm
06a3505698
Add optimistic config flag to modbus select. ( #3267 )
2022-03-16 14:06:00 +13:00
Jesse Hills
0372d17a11
Allow custom register type for modbus number ( #3202 )
2022-03-16 13:43:05 +13:00
rbaron
68e957c147
Adds support for b-parasite's v2 BLE protocol ( #3290 )
2022-03-16 11:05:29 +13:00
andrewpc
99f5ed1461
Add support for QMP6988 Pressure sensor ( #3192 )
2022-03-15 08:09:17 +13:00
Rai-Rai
59f67796dc
Fixed wrong comment ( #3286 )
2022-03-14 08:00:00 +13:00
stegm
aafdfa933e
Add optimistic config flag to modbus select. ( #3267 )
2022-03-10 08:40:43 +13:00
Jesse Hills
5068619f1b
Merge branch 'dev' into bump-2022.3.0b1
2022-03-09 20:07:49 +13:00
wilberforce
5b2457af0b
Add visual step/min/max for webserver climate ( #3275 )
2022-03-09 10:28:16 +13:00
JasperPlant
4c22a98b0b
Add entity_category_diagnostics to SGP30 baseline sensors ( #3272 )
2022-03-08 15:21:13 +13:00
wilberforce
3b8ca80900
Webserver v2 ( #2688 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-08 15:02:24 +13:00
Jesse Hills
dc6eff83ea
Only get free memory size from internal ( #3259 )
2022-03-02 16:44:35 +13:00
Jesse Hills
38ff66debd
Remove stray define ( #3260 )
2022-03-02 16:32:45 +13:00
Sean Brogan
1d2e0f74ea
Add Mopeka BLE and Mopeka Pro Check BLE Sensor ( #2618 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-01 11:30:33 +13:00
Jesse Hills
bf60e40d0b
Add optional display page for touchscreen binary sensors ( #3247 )
2022-02-23 11:05:53 +13:00
RubyBailey
c9094ca537
Add sensor support: Honeywell ABP (SPI version) ( #3164 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
2022-02-22 11:22:30 +01:00
Nicholas Peters
9323b3a248
Fix regression caused by TSL2591 auto gain ( #3249 )
2022-02-22 13:53:24 +13:00
Jesse Hills
b55e9329d9
Fix template button after abstract press_action ( #3250 )
2022-02-22 13:47:16 +13:00
Micha Nordmann
a5b4105971
support for waveshare 7.50in-hd-b ( #3239 )
2022-02-22 07:35:04 +13:00
Arturo Casal
d1feaa935d
Add device support: MCP4728 ( #3174 )
...
* Added MCP4728 output component.
* Added tests to test1.yaml
* Added codeowners
* Lint fixes
* Implemented code review changes
* Lint fixes
* Added i2c communication check on setup()
* Fixed tests
* Lint fix
* Update esphome/components/mcp4728/mcp4728_output.cpp
Changed log function
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 12:47:03 +01:00
Martin Weinelt
6919930aaa
Respect ESPHOME_USE_SUBPROCESS in esp32 post_build script ( #3246 )
2022-02-21 14:05:13 +13:00
EdJoPaTo
69633826bb
Implement send_first_at for exponential_moving_average ( #3240 )
2022-02-21 13:13:06 +13:00
Niorix
771162bfb1
light: add RESTORE_AND_OFF/RESTORE_AND_ON LightRestoreMode ( #3238 )
2022-02-21 12:52:14 +13:00
Fabian Affolter
ba785e29e9
Add support for MPU-6886 ( #3183 )
2022-02-21 12:23:26 +13:00
Jesse Hills
78951c197a
Fix lilygo touchscreen rotation ( #3221 )
2022-02-21 09:58:53 +13:00
cstaahl
07c1cf7137
Pulse meter internal filter mode ( #3082 )
...
Co-authored-by: Paul Daumlechner <paul.daumlechner@live.de>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 09:32:35 +13:00
Otto Winter
d26141151a
Button code cleanup ( #3242 )
2022-02-21 09:17:51 +13:00
Otto Winter
f59dbe4a88
Add copy integration ( #3241 )
2022-02-21 09:13:37 +13:00
Otto Winter
5811389891
BH1750 dynamically calculate options ( #3214 )
...
* BH1750 dynamically calculate options
* Fix tests
* Fix NAN
* Convert setup to new-style
* Add myself as codeowner
2022-02-19 15:49:20 +01:00
Otto Winter
debcaf6fb7
Add ESP32C3 and ESP32S2 support to dashboard ( #3152 )
...
* Add ESP32C3 and ESP32S2 support to dashboard
* Format
* Fix tests
2022-02-19 15:47:50 +01:00
Tyler Bules
b8d10a62c2
ESP32-C3 deep sleep fix ( #3066 )
2022-02-19 15:13:48 +01:00
Otto Winter
34c9d8be50
Lint trailing whitespace ( #3230 )
2022-02-19 14:46:27 +01:00
Otto Winter
0c1520dd9c
Fix ESP8266 climate memaccess warning ( #3226 )
2022-02-19 14:11:45 +01:00
Otto Winter
d594f43ebd
Publish NAN when dallas conversion failed ( #3227 )
2022-02-19 14:11:01 +01:00
Oxan van Leeuwen
125c693e3f
Add ESP32 variant config validator function ( #3088 )
...
* Add esp32_variant config validator function
* Drop unused is_esp32c3 function
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 11:41:34 +01:00
mknjc
ad2f857e15
[miscale] Add flag to clear last impedance reading if the newly received reading only contains weight ( #3132 )
2022-02-19 10:59:53 +01:00
Peter Valkov
e445d6aada
Fix for api disconnect detection. ( #2909 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 10:36:19 +01:00
Arturo Casal
88fbb0ffbb
Add sensor support: MAX44009 ( #3125 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:49:45 +01:00
Borys Pierov
231908fe9f
Implement text_sensor based on ble_client ( #3079 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:45:32 +01:00
ImSorryButWho
f137cc10f4
Remote magiquest protocol ( #2963 )
...
Co-authored-by: Aaron Hertz <aaron@rockforest.org>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-18 22:22:41 +01:00
Michael Labuschke
1a8f8adc2a
Read all cell voltages from DalyBMS ( #3203 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 11:00:03 +13:00
Jesse Hills
7a242bb4ed
Binary Sensor codegen tidyup ( #3217 )
2022-02-18 10:39:59 +13:00
Jesse Hills
3b8bb09ae3
Add class as first positional arg to sensor_schema ( #3216 )
2022-02-18 10:27:20 +13:00
Jesse Hills
140db85d21
Add LONG LONG flag for arduinojson ( #3212 )
2022-02-18 10:11:22 +13:00
mipa87
ccce4b19e8
Fix pm1006 polling component definition ( #3210 )
2022-02-17 21:47:31 +01:00
Adrián Panella
8cb9be7560
Analog threshold ( #3190 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 09:14:10 +13:00
Roi Tagar
958ad0d750
HttpRequestComponent::get_string - avoid copy ( #2988 )
2022-02-17 17:03:54 +13:00
wilberforce
36ddd9dd69
Simplify captive portal to compressed single page ( #2872 )
2022-02-17 17:02:10 +13:00
Felix Storm
38259c96c9
CAN bus: support bit mask for on_frame can_id ( #3196 )
2022-02-17 17:00:31 +13:00
Felix Storm
c054fb8a2c
CAN bus: read all queued messages ( #3194 )
2022-02-17 17:00:14 +13:00
Otto Winter
5a0b8328d8
ESP8266 early init for pins ( #3144 )
2022-02-17 16:59:46 +13:00
Jesse Hills
ffa19426d7
Remove redundant name from binary_sensor constructor ( #3213 )
2022-02-17 16:56:44 +13:00
Stewart
c123804294
Set entity-category to diagnostic for debug component ( #3209 )
...
Co-authored-by: Stewart Morgan <stewart@arnos-vale.net>
Co-authored-by: root <root@build.servers.arnos-vale.net>
2022-02-17 13:53:26 +13:00
Stewart
51cb5da7f0
Fix missed ARDUINO_VERSION_CODE to USE_ARDUINO_VERSION_CODE changes ( #3206 )
...
Co-authored-by: Stewart Morgan <stewart@arnos-vale.net>
2022-02-16 16:50:10 +01:00
Maurice Makaay
16dc7762f9
Fix strlcpy() uses to make long SSIDs and passwords work ( #3199 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-02-16 09:45:05 +13:00
Maurice Makaay
ce073a704b
Fix strlcpy() uses to make long SSIDs and passwords work ( #3199 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-02-16 08:54:21 +13:00
Guillermo Ruffino
113232ebb6
add sim800l diagnostics ( #3136 )
2022-02-15 17:01:50 +13:00
Jesse Hills
dcc80f9032
Allow framework version validator to be maximum version ( #3197 )
2022-02-15 12:00:12 +13:00
Otto Winter
dd554bcdf4
Make generating combined binary output verbose ( #3127 )
2022-02-15 12:00:12 +13:00
Jesse Hills
f376a39e55
Clamp rotary_encoder restored value to min and max ( #3184 )
2022-02-15 12:00:12 +13:00
Jesse Hills
a13a1225b7
Allow framework version validator to be maximum version ( #3197 )
2022-02-15 11:57:47 +13:00
Otto Winter
3a67884451
Improve dallas timing ( #3181 )
...
* Improve dallas timing
* Format
2022-02-11 09:06:06 +01:00
Otto Winter
72e716cdf1
Make generating combined binary output verbose ( #3127 )
2022-02-11 21:06:00 +13:00
Jesse Hills
40e06c9819
Raise minimum python version to 3.8 ( #3176 )
2022-02-10 09:55:11 +01:00
Jesse Hills
ad6c5ff11d
Clamp rotary_encoder restored value to min and max ( #3184 )
2022-02-09 23:12:05 +01:00
Otto Winter
2622e59b0b
Remove spurious Zeroconf instance from api client ( #3143 )
2022-02-09 14:57:00 +01:00
Jesse Hills
272d6f2a8b
Merge branch 'dev' into bump-2022.2.0b1
2022-02-09 23:47:36 +13:00
Borys Pierov
e7dd6c52ac
Allow to set manufacturer data for BLEAdvertising ( #3179 )
2022-02-09 23:29:32 +13:00
Jesse Hills
f43e04e15a
Try fix canbus config validation ( #3173 )
2022-02-09 11:42:00 +13:00
Jesse Hills
88d72f8c9a
Fix files CI after merging ( #3175 )
2022-02-09 08:04:44 +13:00
Andrej Komelj
9826726a72
Implement MQTT discovery object_id generator ( #3114 )
2022-02-08 22:58:38 +13:00
Jesse Hills
c66d0550e8
Inkplate 6 PLUS ( #3013 )
2022-02-08 22:56:56 +13:00
mckaymatthew
4aeacfd16e
Add max9611 High Side Current Shunt ADC ( #2705 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 22:56:40 +13:00
stegm
58fa63ad88
Add Select for modbus ( #3032 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-08 22:27:22 +13:00
Jesse Hills
94f944dc9c
Add Lilygo t5 4.7 Touchscreen ( #3084 )
2022-02-08 21:50:25 +13:00
Ashton Kemerling
116ddbdd01
Add require response option for BLE binary output ( #3091 )
2022-02-08 21:30:31 +13:00
Jesse Hills
1c0697b5d4
Dont warn on nonnull comparisons ( #3123 )
2022-02-08 21:28:12 +13:00
Otto Winter
434ca47ea0
Enable mDNS during OTA safe mode ( #3146 )
2022-02-08 21:21:52 +13:00
functionpointer
397ef72b16
MLX90393 three-axis magnetometer ( #2770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:42:11 +13:00
Jonas Bergler
7ca9245735
wifi_info, reduce polling interval ( #3165 )
...
Co-authored-by: Jonas Bergler <jbergler@meraki.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:27:39 +13:00
Jesse Hills
69856286e8
Text sensor schema generator similar to sensor ( #3172 )
2022-02-08 17:23:45 +13:00
Jeff Eberl
ad43d6a5bc
Added RadonEye RD200 Component ( #3119 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 16:32:37 +13:00
mknjc
1e5004f495
[debug] Refactor debug sensors to use the normal sensor model. ( #3162 )
2022-02-08 12:45:27 +13:00
Jesse Hills
ab47e201c7
Bump improv library to 1.2.1 ( #3160 )
2022-02-04 19:15:00 +13:00
Samuel Sieb
42984fa72a
Handle Tuya multi-datapoint messages ( #3159 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-02-04 15:50:42 +13:00
Franck Nijhof
e7864a28a1
Add device class support to Switch ( #3012 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-04 09:04:48 +13:00
Keilin Bickar
21803607e7
Add new Lock core component ( #2958 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-04 07:24:31 +13:00
dependabot[bot]
2b39988707
Bump black from 21.12b0 to 22.1.0 ( #3147 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-02-01 10:26:37 +01:00
Otto Winter
4de642ff28
Bump esp-idf framework version from 4.3.0 to 4.3.2 ( #3120 )
2022-01-31 07:59:56 +01:00
Jesse Hills
bf91443f38
Improv_serial scan and send wifi networks list ( #3116 )
2022-01-31 11:08:20 +13:00
Jesse Hills
4a5970b4af
Fix backwards string case helpers ( #3126 )
2022-01-31 10:58:27 +13:00
Matt Hamilton
0c3568fad5
Add support for Waveshare 7.5in-bv2 ( #3121 )
2022-01-29 00:37:47 +13:00
drug123
0f3d4d9a47
Add Xiaomi MHOC303 sensor e-ink clock ( #3115 )
2022-01-27 12:54:29 +13:00
Otto Winter
ad1f4429c9
Fix lint for TSL2591 ( #3118 )
2022-01-26 13:50:43 +01:00
Martin
7590d5eacb
set adc width to 13 bits for esp32-s2 ( #3117 )
2022-01-26 13:33:59 +01:00
Nicholas Peters
c5974b8833
TSL2591 automatic gain control ( #3071 )
2022-01-26 22:48:51 +13:00
Otto Winter
511c8de6f3
ESP8266 Set recommended framework to 3.0.2 ( #2606 )
2022-01-26 22:41:57 +13:00
Wouter van der Wal
a718ac7ee0
Add qr code support for displays ( #2952 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 22:20:45 +13:00
Jesse Hills
ef832becf1
Create base touchscreen component and refactor ektf2232 ( #3083 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 16:26:46 +13:00
micronen
3a62455948
Add Heap Sensors - free/max block/fragmentation ( #1578 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-01-25 19:18:41 +01:00
Zebble
297824e2d7
Add support for additional colors on GROW R503 ( #3087 )
2022-01-25 17:18:36 +01:00
Jimmy Hedman
d92f297bc0
Add IPv6 support for ESP-IDF framework ( #2953 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 09:55:33 +01:00
guillempages
7a0827e3d0
Configurable HTTP redirect following ( #3100 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 09:53:22 +01:00
Dav-id
1de941e837
Esp32cam full control ( #3090 )
2022-01-25 11:53:47 +13:00
Joshua Spence
28b65cb810
Perform merges when substituting dict keys ( #3062 )
2022-01-25 11:46:42 +13:00
Martin
6ff3942e8b
[TCS34725] remove duplicated endian conversion ( #3037 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 11:41:14 +13:00
Rebbe Pod
ef5d959788
Add increment_day function to ESPTime ( #2955 )
2022-01-24 21:54:46 +01:00
Oxan van Leeuwen
6a2c58fcc0
Implement output button ( #3109 )
2022-01-25 09:30:48 +13:00
Oxan van Leeuwen
80d03a631e
Force braces around multi-line statements ( #3094 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-25 08:56:36 +13:00
Martin
6b27f2d2cf
Remove unused polling_component_schema from modbus number ( #3108 )
2022-01-25 08:44:20 +13:00
Oxan van Leeuwen
cdda648360
Generate ARDUINO_VERSION_CODE in Python code ( #3101 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-01-24 10:34:34 +01:00
Oxan van Leeuwen
c2ee0f0864
Rename WEBSERVER_PORT define to USE_WEBSERVER_PORT ( #3102 )
2022-01-24 00:34:38 +01:00
Oxan van Leeuwen
2a84db7f85
Refactor fan platform to resemble climate/cover platforms ( #2848 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: rob-deutsch <robzyb+altgithub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 22:21:54 +13:00
VitaliyKurokhtin
8187a4bce9
Command retain option for MQTT component ( #3078 )
2022-01-23 21:05:37 +13:00
Oxan van Leeuwen
97681d142e
Enable readability-redundant-access-specifiers check ( #3096 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 20:47:22 +13:00
Oxan van Leeuwen
b2430097f2
Enable readability-named-parameter check ( #3098 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 20:39:07 +13:00
Oxan van Leeuwen
7da12a878f
Enable readability-redundant-member-init check ( #3097 )
2022-01-23 20:34:43 +13:00
Oxan van Leeuwen
a31700e16f
Enable readability-qualified-auto check ( #3095 )
2022-01-23 20:29:58 +13:00
Oxan van Leeuwen
7854522792
Enable readability-const-return-type check ( #3099 )
2022-01-23 20:28:00 +13:00
Pavel Skuratovich
a6a9ebfde2
slow_pwm: allow to restart a cycle on state change ( #3004 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-22 23:08:55 +01:00
Plácido Revilla
c6cbe2748e
Set the wrapped single light in light partition to internal ( #3092 )
2022-01-22 21:04:36 +01:00
Joshua Spence
f9a7f00843
Add restore_mode to fan component ( #3051 )
2022-01-22 20:41:58 +01:00
William Charlton
f0b183a552
Wake-on-LAN button ( #3030 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: William Charlton <will.charlton1@icloud.com>
2022-01-23 00:13:46 +13:00
Jesse Hills
338ada5c9f
Allow multiple configs for cd74hc4067 ( #3085 )
2022-01-22 19:33:15 +13:00
Jimmy Hedman
ef88f9923f
Implement IPv6 sockets for lwIP ( #3015 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-21 10:08:54 +01:00
Jesse Hills
6f8c7d9ec4
Add ektf2232 touchscreen support ( #3027 )
2022-01-21 15:45:49 +13:00
Jesse Hills
045952939e
Support simple transparent pngs for display ( #3035 )
2022-01-21 11:16:18 +13:00
Jesse Hills
1c51cac5ba
Add initial_run to regular lambda light effect ( #3059 )
2022-01-21 11:09:07 +13:00
buxtronix
ea11462e1e
AM43: autoload "sensor" to avoid compile errors ( #3077 )
2022-01-20 13:33:42 +01:00
Otto Winter
62f9736b1d
API: Expect a name for connections ( #2533 )
2022-01-20 12:03:32 +01:00
Jesse Hills
1f8a1f0046
Bump improv library version ( #3072 )
2022-01-20 15:21:44 +13:00
cwitting
172507acb5
Fix calibration parameter for bme680 humidity calculation ( #3069 )
2022-01-20 10:53:52 +13:00
Martin
434ab65c16
[modbus_controller] fix incorrect start address for number write ( #3073 )
2022-01-20 09:19:24 +13:00
Oxan van Leeuwen
869743a742
Fail hard if no random bytes available for encryption ( #3067 )
2022-01-18 15:49:31 +13:00
Martin
7b03e07908
[modbus_controller] add missing skip_updates ( #3063 )
2022-01-18 15:49:31 +13:00
Oxan van Leeuwen
737188ae50
Fail hard if no random bytes available for encryption ( #3067 )
2022-01-18 14:29:57 +13:00
Martin
cdb4fa2487
[modbus_controller] add missing skip_updates ( #3063 )
2022-01-18 09:05:13 +13:00
Jesse Hills
01b62a16c3
Add number setting to web_server/rest_api ( #3055 )
2022-01-17 12:40:07 +13:00
Oxan van Leeuwen
c5eba04517
Remove deprecated attribute from virtual entity methods ( #3056 )
2022-01-17 12:40:07 +13:00
Oxan van Leeuwen
282313ab52
Rename post_build scripts to fix codeowners script ( #3057 )
2022-01-17 12:40:07 +13:00
Jesse Hills
45ac577c4d
Add number setting to web_server/rest_api ( #3055 )
2022-01-17 12:31:44 +13:00
Oxan van Leeuwen
89e7448007
Remove deprecated attribute from virtual entity methods ( #3056 )
2022-01-16 23:40:15 +01:00
Oxan van Leeuwen
f44fca0a4b
Rename post_build scripts to fix codeowners script ( #3057 )
2022-01-17 11:15:11 +13:00
Jesse Hills
fe4a14e6cc
Merge branch 'dev' into bump-2022.1.0b1
2022-01-13 11:02:07 +13:00
Jesse Hills
c0ff899812
Generate basic config for esphome-web devices ( #3036 )
2022-01-12 19:37:56 +13:00
Martin
56547b3d50
[Modbus_controller] Fix duplicate cmd check ( #3031 )
2022-01-12 16:38:13 +13:00
Sympatron GmbH
5026bc7a78
Native ESP32 CAN support ( #1629 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-12 08:54:35 +13:00
Andreas Soehlke
27364ee72c
Add cd74hc4067 multiplexer ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: asoehlke <git@soehlke.de>
2022-01-11 16:59:57 +13:00
Jesse Hills
ece71a0228
Run post scripts for factory binaries for flashing ( #3003 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-11 15:24:26 +13:00
Oxan van Leeuwen
073828235f
Deprecate virtual methods to set entity properties ( #3021 )
2022-01-10 13:32:39 +01:00
Stefan Grufman
41bcc8c0f4
Nexa 433MHz RF protocol ( #2037 )
...
Co-authored-by: Stefan Grufman <stefan.grufman@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 23:35:39 +13:00
Chris Nussbaum
a0ea2aae6e
Add an action for pzemac to reset the total energy ( #2480 )
2022-01-10 23:13:39 +13:00
Jeffrey Borg
f34b46a621
Fix heatpumpir codegen min/max temperatures ( #3025 )
2022-01-10 16:48:05 +13:00
Lubos Horacek
7217a4f7a4
Fix display picture for nextion display ( #3018 )
2022-01-10 14:08:38 +13:00
Oxan van Leeuwen
6383eca54a
Clean-up random helper functions ( #3022 )
2022-01-10 13:50:26 +13:00
Martin
e55bd1e559
[Modbus_controller] Fix binary sensor lambda ( #3020 )
2022-01-10 12:29:29 +13:00
MiKuBB
9e8b701dea
Adding sdm_meter ability to report total power ( #2959 )
2022-01-10 12:23:01 +13:00
rsumner
a4431abea8
MCP3204 4-channel 12-bit ADC component ( #2895 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 12:04:48 +13:00
Kamil Trzciński
5844c1767b
Extend esp32_camera with requester to improve performance ( #2813 )
2022-01-10 11:58:49 +13:00
Sergey Dudanov
9a70bfa471
New Midea IR component, improvements and fixes ( #2847 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 11:47:19 +13:00
Valentin Ochs
b406c6403c
Create new kalman_combinator component ( #2965 )
2022-01-09 23:44:36 +01:00
Oxan van Leeuwen
499625f266
Convert is_callable to a backport of std::is_invocable ( #3023 )
2022-01-10 11:07:37 +13:00
Martin
6b773553fc
Add turn_on/off trigger to slow_pwm ( #2921 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-09 19:49:57 +01:00
Joshua Spence
15fe049a99
Add restore_mode to output switch ( #3016 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-09 19:47:00 +01:00
stegm
e4555f6997
Fix register ranges in modbus controller ( #2981 )
2022-01-09 16:24:23 +01:00
Jesse Hills
ea1be8e7bf
Add MCP47A1 DAC output ( #3014 )
2022-01-08 21:35:55 +13:00
stegm
84a830195f
Fix offset bug in modbus text sensor. ( #3006 )
2022-01-06 16:40:22 +01:00
Oxan van Leeuwen
07e790f900
Drop uint{32,64}_to_string() helper functions ( #3009 )
2022-01-06 16:36:11 +01:00
Oxan van Leeuwen
a4931f5d78
Clean-up reverse_bits helpers ( #3011 )
2022-01-07 00:54:58 +13:00
Martin
5e1e543b06
Add support for BMP388 / BMP 390 pressure and temperature sensor ( #2716 )
2022-01-06 15:01:50 +13:00
Pavel Skuratovich
df929f9445
Fix SlowPWM output switch at the end of period ( #2984 )
2022-01-05 21:31:11 +01:00
mknjc
3067e482fc
atc mithermometer: Add possibility to report signal strength ( #3000 )
2022-01-05 16:43:37 +13:00
Martin
ed5930e934
SGP40 - Reduce delay in measurement ( #2996 )
2022-01-05 10:05:19 +13:00
Gonzalo Paniagua Javier
c8f4fbb7dd
Honor user set values for col/row start for INITR_MINI_160X80. ( #2976 )
...
If the caller sets a value for colstart and/or rowstart when using the INITR_MINI_160X80 model, use those values instead of the default 24 and 0.
After this patch devices with a 160x80 TFT like the m5stick C can set row/col start (26, 1 for m5stick) and avoid garbage lines showing in the display.
2022-01-04 11:02:53 +01:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Martin
b924b179ab
Modbus: add binary output ( #2931 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:19:18 +01:00
Jesse Hills
3df0fee3de
Dont validate baud_rate for sim800l platform ( #2945 )
2022-01-04 10:16:40 +01:00
Igor Scheller
26dd1f8532
Set UTF-8 encoding and version for prometheus /metrics ( #2993 )
2022-01-04 10:14:38 +01:00
Stefan Agner
15ce27992e
Support ISR based pulse counter on ESP32-C3 ( #2983 )
2022-01-04 11:06:43 +13:00
Oxan van Leeuwen
dbc2812022
Improve PSRAM support ( #2884 )
2022-01-04 10:35:15 +13:00
Martin
dce3713f12
Fix HTTPRequestComponent::get_string return value ( #2987 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 19:40:05 +01:00
Christopher Masto
f849d45bb6
Add logging for some Nextion errors that didn't have any ( #2957 )
2022-01-03 19:09:25 +01:00
arunderwood
8ad06fb9ea
Add SH1107_128x64 to the ssd1306 component ( #2967 )
2022-01-03 19:08:16 +01:00
Martin
45ebe51e4f
Modbus: fix response parsing error for coil write ( #2986 )
2022-01-03 18:28:28 +01:00
Martin
407661d56b
Fix compile error for idf projects with ArduinoJson 6 ( #2979 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 18:19:01 +01:00
Stefan Agner
a02d2e2e11
Explicitly use overloaded begin() for I2C master initialization ( #2978 )
...
Arduino 2.0.1 and newer support slave and master mode. The two modes
have a begin() method with different signature:
```
// Slave Begin
bool TwoWire::begin(uint8_t addr, int sdaPin, int sclPin, uint32_t frequency)
// Master Begin
bool TwoWire::begin(int sdaPin, int sclPin, uint32_t frequency)
```
Use type casting to make sure that overloaded method for master mode
is used.
2022-01-03 16:37:21 +01:00
Jesse Hills
33f17f75a0
Upgrade ArduinoJson to 6.18.5 and migrate code ( #2844 )
2022-01-01 22:31:43 +13:00
MrEditor97
23edb18d7e
INA260 Current and Power Sensor support ( #2788 )
2021-12-31 22:08:49 +13:00
arunderwood
07ff3a853f
Add pin aliases for featheresp32-s2 ( #2970 )
2021-12-31 20:11:28 +13:00
Sebastian Raff
2cf36bdb46
Fix switch log state if inverted ( #2960 )
2021-12-30 16:05:31 +13:00
Jesse Hills
fc0a6546a2
Only allow internal pins for dht sensor ( #2940 )
2021-12-30 13:58:47 +13:00
Jesse Hills
ffd4280d6c
Require arduino in webserver for better validation ( #2941 )
2021-12-30 13:58:46 +13:00
marsjan155
cb0677cafe
ST7920 ESP32 fix ( #2962 )
...
Co-authored-by: Marcin Depa <m.depa91@gmail.com>
2021-12-30 10:34:30 +13:00
Daniel Hyles
c6956527d1
Remove Content-Length header from camera snapshot response ( #2860 )
...
* Update camera_web_server.cpp
Removed the duplicated CONTENT_LENGTH header
* Update camera_web_server.cpp
* Update camera_web_server.cpp
2021-12-28 09:32:17 +13:00
Jesse Hills
b7aad39daf
Only allow internal pins for dht sensor ( #2940 )
2021-12-23 08:31:56 +13:00
Jesse Hills
cc5947467f
Require arduino in webserver for better validation ( #2941 )
2021-12-22 20:08:54 +13:00
George
e152f128c8
Change HDC1080 init instruction failure from error to warning ( #2927 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-22 15:35:01 +13:00
Jan Čermák
beb5f3dc9d
bang_bang: respect set cool- and heat-only modes ( #2926 )
2021-12-22 15:27:16 +13:00
Jesse Hills
f5c3b3446f
Support inkplate10 ( #2937 )
2021-12-22 12:56:52 +13:00
jsuanet
f431c7402f
Add shutdown and safe_mode button ( #2918 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-12-20 22:25:36 +01:00
Oxan van Leeuwen
9471df0a1b
Fix MQTT button press action ( #2917 )
2021-12-21 08:24:07 +13:00
Oxan van Leeuwen
6d39f64be7
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-21 08:24:07 +13:00
Oxan van Leeuwen
4907e6f6d7
Fix MQTT button press action ( #2917 )
2021-12-21 08:19:20 +13:00
Jonas De Kegel
1ccee86705
Fix tm1637 bootloop ( #2929 )
2021-12-20 18:06:04 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Frank Langtind
6ec9cfb044
Add Tuya Number support ( #2765 )
2021-12-20 14:35:10 +13:00
Benny de Leeuw
66e0ff8392
Add growatt modbus sensor ( #2922 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-20 14:30:23 +13:00
Martin
1fb0a7109d
Modbus: use multiply for publishing number ( #2916 )
2021-12-15 22:38:23 +13:00
wilberforce
386a5b6362
Allow button POST on press from web server ( #2913 )
2021-12-15 14:57:32 +13:00
Oxan van Leeuwen
e32a999cd0
Set text sensor state property to filter output ( #2893 )
2021-12-15 14:57:32 +13:00
sveip
192eb49589
ESP32 CAM add Automatic Exposure Control option ( #2892 )
...
Co-authored-by: Peter <psv@tsat.net>
Co-authored-by: Carlos Garcia Saura <CarlosGS@users.noreply.github.com>
2021-12-15 07:46:43 +13:00
Petr Vraník
5d70ff702b
quantile filter support ( #2900 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: pvranik <petr.vranik@mgm-tp.com>
2021-12-15 07:43:42 +13:00
wilberforce
45e346cf1b
Allow button POST on press from web server ( #2913 )
2021-12-14 15:08:01 +13:00
Oxan van Leeuwen
b3fb35783e
Set text sensor state property to filter output ( #2893 )
2021-12-13 15:21:09 +13:00
myhomeiot
a79c6aa9e0
Added access to ble_scan_result_evt_param as get_scan_result ( #2854 )
2021-12-13 13:08:18 +13:00
Martin
4bb58b2de9
Add gpio 12 to strapping pin list ( #2902 )
2021-12-13 11:03:08 +13:00
Jesse Hills
4e10881331
Log the actual value in modbus number ( #2901 )
2021-12-13 10:28:19 +13:00
Ben Owen
cec4a81e14
Add reset_duration option for waveshare epaper HAT rev 2.1 ( #1481 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-13 10:27:11 +13:00
Carlos Garcia Saura
da45923d05
Turn verbose a debug statement in bme280 ( #2906 )
2021-12-13 09:32:37 +13:00
Carlos Garcia Saura
31a61b598b
Reduce timing noise in duty_cycle ( #2881 )
2021-12-13 09:30:47 +13:00
tony
9c0506592b
Add light.on_state trigger ( #2868 )
2021-12-13 09:19:57 +13:00
Oxan van Leeuwen
beeb0c7c5a
Introduce hex parsing & formatting helper functions ( #2882 )
2021-12-13 09:15:23 +13:00
Martin
b2f05faee0
Move i2c scan to setup ( #2869 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-13 09:12:50 +13:00
Keith Burzinski
d504daef91
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 21:07:07 +13:00
Keith Burzinski
cf5193d3e5
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 20:03:22 +13:00
Guillermo Ruffino
708b928c73
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:55:48 +13:00
Jesse Hills
649366ff44
Fix published state for modbus number ( #2894 )
2021-12-10 09:55:47 +13:00
Guillermo Ruffino
c490388e80
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:44:43 +13:00
Jesse Hills
24ec5a6e9d
Fix published state for modbus number ( #2894 )
2021-12-10 09:32:34 +13:00
Carlos Garcia Saura
e763469af8
Feed watchdog while setting up OTA ( #2876 )
2021-12-08 12:58:14 +13:00
Oxan van Leeuwen
6fe4ff7f85
Drop len parameter from parse_number() ( #2883 )
2021-12-08 08:46:25 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Carlos Garcia Saura
e5cc19de43
Feed watchdog while setting up OTA ( #2876 )
2021-12-06 23:26:06 +01:00
Jesse Hills
24874f4c3c
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-07 07:47:48 +13:00
Massimiliano Ravelli
a66e94a0b0
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
56870ed4a8
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-07 07:47:48 +13:00
Martin
3ac720df47
SPS30 : fix i2c read size ( #2866 )
2021-12-07 07:47:48 +13:00
Carlos Garcia Saura
1bc757ad06
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-07 07:47:48 +13:00
Martin
f72abc6f3d
tlc59208f : fix compilation error ( #2867 )
2021-12-07 07:47:48 +13:00
Jesse Hills
49932747b3
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-06 20:57:56 +13:00
Massimiliano Ravelli
71fe2f7ed3
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-06 20:01:50 +13:00
Oxan van Leeuwen
ffc112c9d0
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-06 20:01:14 +13:00
Oxan van Leeuwen
d3e48e296f
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-06 19:59:50 +13:00
Martin
14f6ae75ea
SPS30 : fix i2c read size ( #2866 )
2021-12-06 19:58:26 +13:00
Carlos Garcia Saura
c84efe64d3
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-06 19:56:53 +13:00
Martin
10e89a7dbb
tlc59208f : fix compilation error ( #2867 )
2021-12-06 19:54:46 +13:00
Oxan van Leeuwen
9dcd3d18a0
Update ota_component.cpp ( #2852 )
2021-12-03 07:54:34 +13:00
Oxan van Leeuwen
40c017fd54
Update ota_component.cpp ( #2852 )
2021-12-03 07:52:56 +13:00
Jesse Hills
36b355eb82
Merge branch 'dev' into bump-2021.12.0b1
2021-12-02 19:38:44 +13:00
Martin
9ca4e8f32a
modbus_controller: bugfix: enable overriding calculated register size ( #2845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-02 15:45:11 +13:00
Alexandre-Jacques St-Jacques
1b88b7a166
Fix wifi not working with manual_ip using esp-idf ( #2849 )
2021-12-02 15:33:48 +13:00
Paul Nicholls
caf352ff06
Tuya Cover improvements ( #2637 )
2021-12-02 15:26:56 +13:00
Oxan van Leeuwen
54106179a1
Set ESP32 watchdog to loop task ( #2846 )
2021-12-02 09:05:42 +13:00
Oxan van Leeuwen
607601b3a4
Enable a bunch of clang-tidy checks ( #2149 )
2021-12-02 09:03:51 +13:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Mark Dietzer
24a5325db3
Declare arch_get_cpu_cycle_count for esp8266 as IRAM ( #2843 )
2021-12-01 10:01:15 +01:00
Yuval Brik
1ec3140759
ESP32 Deep Sleep: correct level value ( #2812 )
...
Upon registering for ESP32 deep sleep, DeepSleepComponent::begin_sleep
calculates the level value to wake up on.
As part of PR #2303 , the level was changed to be based on `inverted`
instead of `!inverted`:
Before:
1e8e471dec/esphome/components/deep_sleep/deep_sleep_component.cpp (L76)2b04152482/esphome/components/deep_sleep/deep_sleep_component.cpp (L80)#2644 .
[0]
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#_CPPv428esp_sleep_enable_ext0_wakeup10gpio_num_ti
2021-12-01 09:38:58 +01:00
Oxan van Leeuwen
cbc1334b8d
Fix compile warning in Tuya automations ( #2837 )
2021-12-01 17:11:21 +13:00
mechanarchy
08cbb97ec9
Allow Git credentials to be loaded from secrets ( #2825 )
2021-12-01 17:10:25 +13:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b32b918936
Button device class ( #2835 )
2021-11-30 16:18:21 +01:00
Carlos Garcia Saura
cd018ad3a5
Burst read for BME280, to reduce spurious spikes ( #2809 )
2021-11-30 16:12:52 +01:00
Adrián Panella
24dfecb6f0
cse7766: add energy sensor ( #2822 )
2021-11-30 16:08:00 +01:00
Keith Burzinski
556d071e7f
Fix 8266 SPI Clock Polarity Setting ( #2836 )
2021-11-30 19:30:45 +13:00
dentra
939fb313df
Tuya text_sensor and raw data usage ( #1812 )
2021-11-30 08:08:52 +13:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
definitio
f50e40e0b8
Fix custom mode_state_topic ( #2827 )
2021-11-29 18:09:09 +01:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Conclusio
a5fb036011
Add delay to improve stability ( #2793 )
2021-11-29 10:18:48 +13:00
Dave T
e55506f9db
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 10:18:48 +13:00
Carlos Garcia Saura
50ec1d0445
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
3d5e1d8d91
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
db2128a344
Fix parsing numbers in Anova ( #2816 )
2021-11-29 10:18:48 +13:00
Conclusio
7afcb0fb04
Add delay to improve stability ( #2793 )
2021-11-29 08:13:42 +13:00
Dave T
10f830c3ef
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 08:12:40 +13:00
Carlos Garcia Saura
7a5c3aa7ed
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 08:06:53 +13:00
Oxan van Leeuwen
2b50406856
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 08:02:10 +13:00
Oxan van Leeuwen
10a2a7e0fc
Fix parsing numbers in Anova ( #2816 )
2021-11-29 08:00:29 +13:00
Maurice Makaay
57a029189c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-27 21:13:01 +13:00
Maurice Makaay
671d68bc2c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-26 21:25:58 +01:00
Oxan van Leeuwen
5946c37925
Fix usage of deprecated climate method in anova ( #2801 )
2021-11-26 09:16:39 +01:00
Martin
17a37b1de9
Modbus_controller: Add custom command. ( #2680 )
2021-11-26 12:48:52 +13:00
Adrián Panella
e7827a6997
total_daily_energy: allow to disable restore mode ( #2795 )
2021-11-25 22:35:36 +01:00
Oxan van Leeuwen
9681dfb458
Correct constant for dynamic I2S bus in NeoPixelBus ( #2797 )
2021-11-26 09:37:27 +13:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Oxan van Leeuwen
8e1c9f5042
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:02:54 +13:00
Samuel Sieb
980b7cda8f
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-26 09:02:53 +13:00
Kamil Trzciński
3a72dd5cb6
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-26 09:02:53 +13:00
Dave T
3178243811
Fix frame scaling for animated gifs ( #2750 )
2021-11-26 09:02:53 +13:00
Maurice Makaay
d30e2f2a4f
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-26 09:02:53 +13:00
Oxan van Leeuwen
3637be251e
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:00:49 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Martin
ccfa1e23f0
Add support for sdp8xx ( #2779 )
2021-11-25 11:28:19 +13:00
rsumner
290da8df2d
Fix LEDC resolution calculation on ESP32-C3/S2/S3 ( #2794 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-25 11:22:51 +13:00
Martin
4b1d73791d
remove LEDC_HIGH_SPEED_MODE for C3, S2, S3 ( #2791 )
2021-11-25 08:06:08 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
krunkel
598f5b241f
Remove unnecessary write in AHT10 update ( #2675 )
2021-11-23 09:26:16 +01:00
Andreas Hergert
710096b1c6
Fixed wrong setup of tc9548a ( #2766 )
2021-11-23 09:20:55 +01:00
Dave T
07b882c801
Fix distorted gif frames when resizing ( #2774 )
2021-11-23 09:20:36 +01:00
cvwillegen
3e5331a263
Prettier date time display after time sync ( #2778 )
2021-11-23 09:20:20 +01:00
Samuel Sieb
1424091ee5
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-22 12:11:36 +13:00
Kamil Trzciński
61ec16cdfc
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-22 12:09:11 +13:00
Dave T
e5cb5756aa
Fix frame scaling for animated gifs ( #2750 )
2021-11-18 23:20:32 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Martin
8267f01ccd
Remove arduino dependency from hm3301 ( #2745 )
2021-11-18 08:03:46 +13:00
Sergey V. DUDANOV
6f9439e1bc
Fix byte order in NEC protocol implementation ( #2534 )
2021-11-17 18:35:50 +01:00
spattinson
06994c0dfc
Change LUT for ttgo t5 2.13inch to improve partial refresh ( #2475 )
2021-11-17 18:28:36 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
df6730be55
Move to use improv lib from platformio ( #2741 )
2021-11-17 18:23:17 +01:00
Franck Nijhof
8294d10d5b
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:31:38 +13:00
Evgeny
67558bec47
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 23:31:38 +13:00
Franck Nijhof
6c1ef398bb
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:28:31 +13:00
Evgeny
0469e19f54
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 09:52:40 +01:00
Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
rotarykite
c41547fd4a
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 08:00:26 +13:00
Ryan Hoffman
0d47d41c85
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-17 08:00:26 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
b0a0a153f3
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:05:51 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Alexandre-Jacques St-Jacques
09e8782318
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
fea3c48098
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 11:03:39 +13:00
Sergey V. DUDANOV
c2f57baec2
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
f4a140e126
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 11:03:39 +13:00
Krzysztof Białek
87e1cdeedb
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-15 11:03:39 +13:00
Jesse Hills
81a36146ef
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-15 11:03:39 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
lcavalli
b526155cce
Update device classes for binary sensors ( #2703 )
2021-11-12 16:12:31 +13:00
Jesse Hills
62c3f301e7
Only allow prometheus when using arduino ( #2697 )
2021-11-12 16:12:31 +13:00
