esphome/tests/test1.yaml

4440 lines
102 KiB
YAML
Raw Normal View History

2022-09-06 05:48:01 +02:00
---
substitutions:
devicename: test1
sensorname: my
textname: template
roomname: living_room
esphome:
2018-08-26 11:26:14 +02:00
name: test1
name_add_mac_suffix: true
2018-08-26 11:26:14 +02:00
platform: ESP32
board: nodemcu-32s
platformio_options:
board_build.partitions: huge_app.csv
2018-08-26 11:26:14 +02:00
on_boot:
priority: 150.0
then:
- lambda: >-
ESP_LOGD("main", "ON BOOT!");
on_shutdown:
then:
- lambda: >-
ESP_LOGD("main", "ON SHUTDOWN!");
2018-09-23 18:58:41 +02:00
on_loop:
then:
- lambda: >-
ESP_LOGV("main", "ON LOOP!");
2018-09-26 18:39:41 +02:00
build_path: build/test1
2018-08-26 11:26:14 +02:00
packages:
wifi: !include test_packages/test_packages_package_wifi.yaml
pkg_test: !include test_packages/test_packages_package1.yaml
2018-08-26 11:26:14 +02:00
wifi:
2019-01-06 11:43:14 +01:00
networks:
- ssid: "MySSID"
password: "password1"
- ssid: "MySSID2"
password: ""
2020-11-20 03:59:19 +01:00
channel: 14
bssid: "A1:63:95:47:D3:1D"
2018-08-26 11:26:14 +02:00
manual_ip:
static_ip: 192.168.178.230
gateway: 192.168.178.1
subnet: 255.255.255.0
dns1: 1.1.1.1
dns2: 1.2.2.1
domain: .local
reboot_timeout: 120s
power_save_mode: light
on_connect:
- light.turn_on: ${roomname}_lights
on_disconnect:
- light.turn_off: ${roomname}_lights
2018-08-26 11:26:14 +02:00
network:
enable_ipv6: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
mdns:
disabled: false
2018-08-26 11:26:14 +02:00
mqtt:
broker: "192.168.178.84"
2018-08-26 11:26:14 +02:00
port: 1883
username: "debug"
password: "debug"
2018-08-26 11:26:14 +02:00
client_id: someclient
use_abbreviations: false
2022-09-06 05:48:01 +02:00
discovery: true
discovery_retain: false
2018-08-26 11:26:14 +02:00
discovery_prefix: discovery
discovery_unique_id_generator: legacy
2018-08-26 11:26:14 +02:00
topic_prefix: helloworld
log_topic:
topic: helloworld/hi
level: INFO
2018-08-26 11:26:14 +02:00
birth_message:
will_message:
shutdown_message:
topic: topic/to/send/to
payload: hi
qos: 2
2022-09-06 05:48:01 +02:00
retain: true
2018-08-26 11:26:14 +02:00
keepalive: 60s
reboot_timeout: 60s
on_message:
- topic: my/custom/topic
qos: 0
then:
- lambda: >-
2018-09-23 18:58:41 +02:00
ESP_LOGD("main", "Got message %s", x.c_str());
2018-08-26 11:26:14 +02:00
- topic: livingroom/ota_mode
then:
2020-11-20 03:59:19 +01:00
- deep_sleep.prevent
- deep_sleep.allow
2018-08-26 11:26:14 +02:00
- topic: livingroom/ota_mode
then:
2020-11-20 03:59:19 +01:00
- deep_sleep.enter:
on_json_message:
topic: the/topic
then:
2020-11-20 03:59:19 +01:00
- if:
condition:
- wifi.connected:
- mqtt.connected:
- light.is_on: kitchen
- light.is_off: kitchen
- fan.is_on: fan_speed
- fan.is_off: fan_speed
2020-11-20 03:59:19 +01:00
then:
- lambda: |-
int data = x["my_data"];
ESP_LOGD("main", "The data is: %d", data);
- light.turn_on:
id: ${roomname}_lights
2020-11-20 03:59:19 +01:00
brightness: !lambda |-
float brightness = 1.0;
if (x.containsKey("brightness"))
brightness = x["brightness"];
return brightness;
effect: !lambda |-
const char *effect = "None";
if (x.containsKey("effect"))
effect = x["effect"];
return effect;
- light.control:
id: ${roomname}_lights
2022-09-06 05:48:01 +02:00
# yamllint disable-line rule:line-length
brightness: !lambda "return id(${roomname}_lights).current_values.get_brightness() + 0.5;"
2020-11-20 03:59:19 +01:00
- light.dim_relative:
id: ${roomname}_lights
2020-11-20 03:59:19 +01:00
relative_brightness: 5%
- uart.write:
id: uart_0
2020-11-20 03:59:19 +01:00
data: Hello World
- uart.write:
id: uart_0
data: [0x00, 0x20, 0x30]
- uart.write:
id: uart_0
data: !lambda |-
return {};
- bluetooth_password.set:
id: my_ld2410
password: abcdef
on_connect:
- light.turn_on: ${roomname}_lights
- mqtt.publish:
topic: some/topic
payload: Hello
on_disconnect:
- light.turn_off: ${roomname}_lights
2018-08-26 11:26:14 +02:00
i2c:
sda:
allow_other_uses: true
number: 21
scl:
allow_other_uses: true
number: 22
2022-09-06 05:48:01 +02:00
scan: true
2018-08-26 11:26:14 +02:00
frequency: 100kHz
setup_priority: -100
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
id: i2c_bus
2018-08-26 11:26:14 +02:00
spi:
id: spi_bus
clk_pin:
allow_other_uses: true
number: GPIO21
mosi_pin:
allow_other_uses: true
number: GPIO22
miso_pin:
allow_other_uses: true
number: GPIO23
2018-08-26 11:26:14 +02:00
uart:
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
- tx_pin:
allow_other_uses: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
number: GPIO22
2022-09-06 05:48:01 +02:00
inverted: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
rx_pin:
allow_other_uses: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
number: GPIO23
2022-09-06 05:48:01 +02:00
inverted: true
baud_rate: 115200
id: uart_0
parity: NONE
data_bits: 8
stop_bits: 1
rx_buffer_size: 512
debug:
dummy_receiver: true
direction: both
after:
bytes: 50
timeout: 500ms
delimiter: "\r\n"
sequence:
- lambda: UARTDebug::log_hex(direction, bytes, ':');
- lambda: UARTDebug::log_string(direction, bytes);
- lambda: UARTDebug::log_int(direction, bytes, ',');
- lambda: UARTDebug::log_binary(direction, bytes, ';');
- id: ld2410_uart
tx_pin:
allow_other_uses: true
number: 18
rx_pin:
allow_other_uses: true
number: 23
baud_rate: 256000
parity: NONE
stop_bits: 1
- id: dfrobot_mmwave_uart
tx_pin:
allow_other_uses: true
number: 14
rx_pin:
allow_other_uses: true
number: 27
baud_rate: 115200
- id: ld2420_uart
tx_pin:
allow_other_uses: true
number: 17
rx_pin:
allow_other_uses: true
number: 16
baud_rate: 115200
parity: NONE
stop_bits: 1
- id: gcja5_uart
rx_pin: GPIO10
parity: EVEN
baud_rate: 9600
2018-08-26 11:26:14 +02:00
2024-05-22 03:08:53 +02:00
safe_mode:
num_attempts: 3
reboot_timeout: 2min
2018-08-26 11:26:14 +02:00
ota:
- platform: esphome
password: "superlongpasswordthatnoonewillknow"
port: 3286
on_state_change:
then:
lambda: >-
ESP_LOGD("ota", "State %d", state);
on_begin:
then:
logger.log: OTA begin
on_progress:
then:
lambda: >-
ESP_LOGD("ota", "Got progress %f", x);
on_end:
then:
logger.log: OTA end
on_error:
then:
lambda: >-
ESP_LOGD("ota", "Got error code %d", x);
2018-08-26 11:26:14 +02:00
logger:
baud_rate: 0
level: VERBOSE
logs:
mqtt.component: DEBUG
mqtt.client: ERROR
web_server:
port: 8080
version: 2
2018-08-26 11:26:14 +02:00
power_supply:
2022-09-06 05:48:01 +02:00
id: atx_power_supply
2018-08-26 11:26:14 +02:00
enable_time: 20ms
keep_on_time: 10s
pin:
number: 13
allow_other_uses: true
2018-08-26 11:26:14 +02:00
inverted: true
deep_sleep:
run_duration: 20s
sleep_duration: 50s
wakeup_pin:
allow_other_uses: true
number: GPIO2
ignore_strapping_warning: true
2018-08-26 11:26:14 +02:00
wakeup_pin_mode: INVERT_WAKEUP
ads1115:
address: 0x48
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
ads1118:
spi_id: spi_bus
cs_pin:
allow_other_uses: true
number: GPIO12
as5600:
i2c_id: i2c_bus
2023-12-21 05:37:02 +01:00
dir_pin:
number: 27
allow_other_uses: true
direction: clockwise
start_position: 90deg
range: 180deg
watchdog: true
power_mode: low1
hysteresis: lsb1
slow_filter: 8x
fast_filter: lsb6
2018-08-26 11:26:14 +02:00
dallas:
pin:
allow_other_uses: true
number: GPIO23
2018-08-26 11:26:14 +02:00
as3935_spi:
cs_pin:
ignore_strapping_warning: true
allow_other_uses: true
number: GPIO12
irq_pin:
allow_other_uses: true
number: GPIO13
esp32_ble:
io_capability: keyboard_only
esp32_ble_tracker:
ble_client:
- mac_address: AA:BB:CC:DD:EE:FF
id: ble_foo
auto_connect: true
- mac_address: 11:22:33:44:55:66
id: ble_blah
auto_connect: false
on_connect:
then:
- switch.turn_on: ble1_status
on_disconnect:
then:
- switch.turn_on: ble1_status
on_passkey_request:
then:
- ble_client.passkey_reply:
id: ble_blah
passkey: 123456
on_passkey_notification:
then:
- logger.log: "Passkey notification received"
on_numeric_comparison_request:
then:
- ble_client.numeric_comparison_reply:
id: ble_blah
2024-02-21 05:14:30 +01:00
accept: true
- mac_address: C4:4F:33:11:22:33
id: my_bedjet_ble_client
bedjet:
- ble_client_id: my_bedjet_ble_client
id: my_bedjet_client
time_id: sntp_time
mcp23s08:
2022-09-06 05:48:01 +02:00
- id: mcp23s08_hub
cs_pin:
ignore_strapping_warning: true
number: GPIO12
allow_other_uses: true
deviceaddress: 0
mcp23s17:
2022-09-06 05:48:01 +02:00
- id: mcp23s17_hub
cs_pin:
ignore_strapping_warning: true
number: GPIO12
allow_other_uses: true
deviceaddress: 1
micronova:
enable_rx_pin:
allow_other_uses: true
number: 4
uart_id: uart_0
dfrobot_sen0395:
- id: mmwave
uart_id: dfrobot_mmwave_uart
2018-08-26 11:26:14 +02:00
sensor:
- platform: xgzp68xx
i2c_id: i2c_bus
temperature:
name: Pressure Temperature
pressure:
name: Differential pressure
k_value: 4096
- platform: pmwcs3
i2c_id: i2c_bus
e25:
name: pmwcs3_e25
ec:
name: pmwcs3_ec
temperature:
name: pmwcs3_temperature
vwc:
name: pmwcs3_vwc
- platform: gcja5
pm_1_0:
name: "Particulate Matter <1.0µm Concentration"
pm_2_5:
name: "Particulate Matter <2.5µm Concentration"
pm_10_0:
name: "Particulate Matter <10.0µm Concentration"
pmc_0_5:
name: "PMC 0.5"
pmc_1_0:
name: "PMC 1.0"
pmc_2_5:
name: "PMC 2.5"
pmc_5_0:
name: "PMC 5.0"
pmc_10_0:
name: "PMC 10.0"
uart_id: gcja5_uart
- platform: internal_temperature
2023-03-09 02:54:51 +01:00
name: Internal Temperature
- platform: ble_client
type: characteristic
ble_client_id: ble_foo
2022-09-06 05:48:01 +02:00
name: Green iTag btn
service_uuid: ffe0
characteristic_uuid: ffe1
descriptor_uuid: ffe2
notify: true
update_interval: never
lambda: |-
ESP_LOGD("main", "Length of data is %i", x.size());
return x[0];
on_notify:
then:
- lambda: |-
ESP_LOGD("green_btn", "Button was pressed, val%f", x);
- platform: ble_client
type: rssi
ble_client_id: ble_foo
name: Green iTag RSSI
update_interval: 15s
2018-08-26 11:26:14 +02:00
- platform: adc
pin: A0
2022-09-06 05:48:01 +02:00
name: Living Room Brightness
update_interval: "1:01"
2018-08-26 11:26:14 +02:00
attenuation: 2.5db
unit_of_measurement: "°C"
icon: "mdi:water-percent"
2018-08-26 11:26:14 +02:00
accuracy_decimals: 5
expire_after: 120s
setup_priority: -100
force_update: true
2018-08-26 11:26:14 +02:00
filters:
- offset: 2.0
- multiply: 1.2
- calibrate_linear:
datapoints:
- 0.0 -> 0.0
- 40.0 -> 45.0
- 100.0 -> 102.5
- clamp:
min_value: -100
max_value: 100
2018-08-26 11:26:14 +02:00
- filter_out: 42.0
- filter_out: nan
- median:
window_size: 5
send_every: 5
send_first_at: 3
2021-03-05 14:10:06 +01:00
- min:
window_size: 5
send_every: 5
send_first_at: 3
- max:
window_size: 5
send_every: 5
send_first_at: 3
2018-08-26 11:26:14 +02:00
- sliding_window_moving_average:
window_size: 15
send_every: 15
send_first_at: 15
2018-08-26 11:26:14 +02:00
- exponential_moving_average:
alpha: 0.1
send_every: 15
send_first_at: 15
- throttle_average: 60s
2018-08-26 11:26:14 +02:00
- throttle: 1s
- heartbeat: 5s
- debounce: 0.1s
- delta: 5.0
- delta: 1%
2018-08-26 11:26:14 +02:00
- or:
2020-11-20 03:59:19 +01:00
- throttle: 1s
- delta: 5.0
2018-08-26 11:26:14 +02:00
- lambda: return x * (9.0/5.0) + 32.0;
on_value:
then:
2022-09-06 05:48:01 +02:00
# yamllint disable rule:line-length
[Huge] Util Refactor, Dashboard Improvements, Hass.io Auth API, Better Validation Errors, Conditions, Custom Platforms, Substitutions (#234) * Implement custom sensor platform * Update * Ethernet * Lint * Fix * Login page * Rename cookie secret * Update manifest * Update cookie check logic * Favicon * Fix * Favicon manifest * Fix * Fix * Fix * Use hostname * Message * Temporary commit for screenshot * Automatic board selection * Undo temporary commit * Update esphomeyaml-edge * In-dashboard editing and hosting files locally * Update esphomeyaml-edge * Better ANSI color escaping * Message * Lint * Download Efficiency * Fix gitlab * Fix * Rename extra_libraries to libraries * Add example * Update README.md * Update README.md * Update README.md * HassIO -> Hass.io * Updates * Add update available notice * Update * Fix substitutions * Better error message * Re-do dashboard ANSI colors * Only include FastLED if user says so * Autoscroll logs * Remove old checks * Use safer RedirectText * Improvements * Fix * Use enviornment variable * Use http://hassio/host/info * Fix conditions * Update platformio versions * Revert "Use enviornment variable" This reverts commit 7f038eb5d26df72f76ea9ae76774e2cec1fd7f59. * Fix * README update * Temp * Better invalid config messages * Platformio debug * Improve error messages * Debug * Remove debug * Multi Conf * Update * Better paths * Remove unused * Fixes * Lint * lib_ignore * Try fix platformio colors * Fix dashboard scrolling * Revert * Lint * Revert
2018-12-05 21:22:06 +01:00
- lambda: |-
2018-08-26 11:26:14 +02:00
ESP_LOGD("main", "Got value %f", x);
id(${sensorname}_sensor).publish_state(42.0);
ESP_LOGI("main", "Value of my sensor: %f", id(${sensorname}_sensor).state);
ESP_LOGI("main", "Raw Value of my sensor: %f", id(${sensorname}_sensor).state);
2022-09-06 05:48:01 +02:00
# yamllint enable rule:line-length
2018-08-26 11:26:14 +02:00
on_value_range:
above: 5
below: 10
then:
- lambda: >-
ESP_LOGD("main", "Got value range %f", x);
- wait_until: wifi.connected
2019-02-17 19:27:33 +01:00
- wait_until:
condition:
binary_sensor.is_on: binary_sensor1
timeout: 1s
2018-08-26 11:26:14 +02:00
on_raw_value:
- lambda: >-
ESP_LOGD("main", "Got raw value %f", x);
- logger.log:
level: DEBUG
2022-09-06 05:48:01 +02:00
format: Got raw value %f
args: ["x"]
2022-09-06 05:48:01 +02:00
- logger.log: Got raw value NAN
2018-08-26 11:26:14 +02:00
- mqtt.publish:
topic: some/topic
payload: Hello
qos: 2
2022-09-06 05:48:01 +02:00
retain: true
- platform: esp32_hall
name: ESP32 Hall Sensor
2018-08-26 11:26:14 +02:00
- platform: ads1115
2022-09-06 05:48:01 +02:00
multiplexer: A0_A1
2018-08-26 11:26:14 +02:00
gain: 1.024
id: ${sensorname}_sensor
2018-08-26 11:26:14 +02:00
filters:
state_topic: hi/me
retain: false
availability:
- platform: ads1118
name: ads1118 adc
multiplexer: A0_A1
gain: 1.024
type: adc
- platform: ads1118
name: ads1118 temperature
type: temperature
- platform: as5600
name: AS5600 Position
raw_position:
2023-12-21 05:37:02 +01:00
name: AS5600 Raw Position
gain:
2023-12-21 05:37:02 +01:00
name: AS5600 Gain
magnitude:
2023-12-21 05:37:02 +01:00
name: AS5600 Magnitude
status:
2023-12-21 05:37:02 +01:00
name: AS5600 Status
- platform: as7341
update_interval: 15s
gain: X8
atime: 120
astep: 99
f1:
name: F1
f2:
name: F2
f3:
name: F3
f4:
name: F4
f5:
name: F5
f6:
name: F6
f7:
name: F7
f8:
name: F8
clear:
name: Clear
nir:
name: NIR
i2c_id: i2c_bus
- platform: atm90e26
cs_pin:
allow_other_uses: true
number: 5
voltage:
name: Line Voltage
current:
name: CT Amps
power:
name: Active Watts
power_factor:
name: Power Factor
frequency:
name: Line Frequency
line_frequency: 50Hz
meter_constant: 1000
pl_const: 1429876
gain_pga: 1X
gain_metering: 7481
gain_voltage: 26400
gain_ct: 31251
- platform: atm90e32
cs_pin:
allow_other_uses: true
number: 5
phase_a:
voltage:
2022-09-06 05:48:01 +02:00
name: EMON Line Voltage A
current:
2022-09-06 05:48:01 +02:00
name: EMON CT1 Current
power:
2022-09-06 05:48:01 +02:00
name: EMON Active Power CT1
reactive_power:
2022-09-06 05:48:01 +02:00
name: EMON Reactive Power CT1
power_factor:
2022-09-06 05:48:01 +02:00
name: EMON Power Factor CT1
gain_voltage: 7305
gain_ct: 27961
phase_b:
current:
2022-09-06 05:48:01 +02:00
name: EMON CT2 Current
power:
2022-09-06 05:48:01 +02:00
name: EMON Active Power CT2
reactive_power:
2022-09-06 05:48:01 +02:00
name: EMON Reactive Power CT2
power_factor:
2022-09-06 05:48:01 +02:00
name: EMON Power Factor CT2
gain_voltage: 7305
gain_ct: 27961
phase_c:
current:
2022-09-06 05:48:01 +02:00
name: EMON CT3 Current
power:
2022-09-06 05:48:01 +02:00
name: EMON Active Power CT3
reactive_power:
2022-09-06 05:48:01 +02:00
name: EMON Reactive Power CT3
power_factor:
2022-09-06 05:48:01 +02:00
name: EMON Power Factor CT3
gain_voltage: 7305
gain_ct: 27961
frequency:
2022-09-06 05:48:01 +02:00
name: EMON Line Frequency
chip_temperature:
2022-09-06 05:48:01 +02:00
name: EMON Chip Temp A
line_frequency: 60Hz
current_phases: 3
gain_pga: 2X
2018-08-26 11:26:14 +02:00
- platform: bh1750
2022-09-06 05:48:01 +02:00
name: Living Room Brightness 3
2018-08-26 11:26:14 +02:00
internal: true
address: 0x23
update_interval: 30s
qos: 2
2022-09-06 05:48:01 +02:00
retain: false
2018-08-26 11:26:14 +02:00
availability:
state_topic: livingroom/custom_state_topic
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: max44009
2022-09-06 05:48:01 +02:00
name: Outside Brightness 1
internal: true
address: 0x4A
update_interval: 30s
mode: low_power
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: bme680
temperature:
2022-09-06 05:48:01 +02:00
name: Outside Temperature
2018-08-26 11:26:14 +02:00
oversampling: 16x
pressure:
2022-09-06 05:48:01 +02:00
name: Outside Pressure
2018-08-26 11:26:14 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Outside Humidity
2018-08-26 11:26:14 +02:00
gas_resistance:
2022-09-06 05:48:01 +02:00
name: Outside Gas Sensor
2018-08-26 11:26:14 +02:00
address: 0x77
heater:
temperature: 320
duration: 150ms
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: bmp085
temperature:
2022-09-06 05:48:01 +02:00
name: Outside Temperature
2018-08-26 11:26:14 +02:00
pressure:
2022-09-06 05:48:01 +02:00
name: Outside Pressure
2018-08-26 11:26:14 +02:00
filters:
- lambda: >-
return x / powf(1.0 - (x / 44330.0), 5.255);
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: bmp280
temperature:
2022-09-06 05:48:01 +02:00
name: Outside Temperature
2018-08-26 11:26:14 +02:00
oversampling: 16x
pressure:
2022-09-06 05:48:01 +02:00
name: Outside Pressure
2018-08-26 11:26:14 +02:00
address: 0x77
update_interval: 15s
iir_filter: 16x
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: dallas
address: 0x1C0000031EDD2A28
2022-09-06 05:48:01 +02:00
name: Living Room Temperature
2018-08-26 11:26:14 +02:00
resolution: 9
- platform: dallas
index: 1
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 2
2018-08-26 11:26:14 +02:00
- platform: dht
pin:
allow_other_uses: true
number: GPIO26
2018-08-26 11:26:14 +02:00
temperature:
id: dht_temperature
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 3
2018-08-26 11:26:14 +02:00
humidity:
id: dht_humidity
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 3
2018-08-26 11:26:14 +02:00
model: AM2302
update_interval: 15s
- platform: dht12
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 4
2018-08-26 11:26:14 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 4
2018-08-26 11:26:14 +02:00
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: duty_cycle
pin:
allow_other_uses: true
number: GPIO25
2018-08-26 11:26:14 +02:00
name: Duty Cycle Sensor
2023-01-17 22:42:43 +01:00
- platform: ee895
co2:
name: Office CO2 1
temperature:
name: Office Temperature 1
pressure:
name: Office Pressure 1
address: 0x5F
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: esp32_hall
2022-09-06 05:48:01 +02:00
name: ESP32 Hall Sensor
2018-08-26 11:26:14 +02:00
update_interval: 15s
- platform: ens210
2018-08-26 11:26:14 +02:00
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 5
2018-08-26 11:26:14 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 5
update_interval: 15s
i2c_id: i2c_bus
- platform: hdc1080
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 6
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 5
2018-08-26 11:26:14 +02:00
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: hlw8012
sel_pin:
allow_other_uses: true
number: 5
cf_pin:
allow_other_uses: true
number: 14
cf1_pin:
allow_other_uses: true
number: 13
2018-08-26 11:26:14 +02:00
current:
2022-09-06 05:48:01 +02:00
name: HLW8012 Current
2018-08-26 11:26:14 +02:00
voltage:
2022-09-06 05:48:01 +02:00
name: HLW8012 Voltage
2018-08-26 11:26:14 +02:00
power:
2022-09-06 05:48:01 +02:00
name: HLW8012 Power
id: hlw8012_power
2021-02-13 09:57:06 +01:00
energy:
2022-09-06 05:48:01 +02:00
name: HLW8012 Energy
2021-02-13 09:57:06 +01:00
id: hlw8012_energy
2018-08-26 11:26:14 +02:00
update_interval: 15s
current_resistor: 0.001 ohm
voltage_divider: 2351
change_mode_every: "never"
initial_mode: VOLTAGE
model: hlw8012
- platform: total_daily_energy
power_id: hlw8012_power
2022-09-06 05:48:01 +02:00
name: HLW8012 Total Daily Energy
- platform: integration
sensor: hlw8012_power
2022-09-06 05:48:01 +02:00
name: Integration Sensor
time_unit: s
- platform: integration
sensor: hlw8012_power
2022-09-06 05:48:01 +02:00
name: Integration Sensor lazy
time_unit: s
2018-08-26 11:26:14 +02:00
- platform: hmc5883l
address: 0x68
field_strength_x:
2022-09-06 05:48:01 +02:00
name: HMC5883L Field Strength X
2018-08-26 11:26:14 +02:00
field_strength_y:
2022-09-06 05:48:01 +02:00
name: HMC5883L Field Strength Y
2018-08-26 11:26:14 +02:00
field_strength_z:
2022-09-06 05:48:01 +02:00
name: HMC5883L Field Strength Z
2018-08-26 11:26:14 +02:00
heading:
2022-09-06 05:48:01 +02:00
name: HMC5883L Heading
2018-08-26 11:26:14 +02:00
range: 130uT
oversampling: 8x
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: honeywell_hih_i2c
temperature:
name: Living Room Temperature 7
humidity:
name: Living Room Humidity 7
update_interval: 15s
i2c_id: i2c_bus
- platform: honeywellabp
pressure:
2022-09-06 05:48:01 +02:00
name: Honeywell pressure
min_pressure: 0
max_pressure: 15
temperature:
2022-09-06 05:48:01 +02:00
name: Honeywell temperature
cs_pin:
allow_other_uses: true
number: GPIO5
- platform: honeywellabp2_i2c
pressure:
name: Honeywell2 pressure
min_pressure: 0
max_pressure: 16000
transfer_function: A
temperature:
name: Honeywell temperature
i2c_id: i2c_bus
address: 0x28
2023-01-17 22:42:47 +01:00
- platform: hte501
temperature:
name: Office Temperature 2
humidity:
name: Office Humidity 1
address: 0x40
i2c_id: i2c_bus
- platform: qmc5883l
address: 0x0D
field_strength_x:
2022-09-06 05:48:01 +02:00
name: QMC5883L Field Strength X
field_strength_y:
2022-09-06 05:48:01 +02:00
name: QMC5883L Field Strength Y
field_strength_z:
2022-09-06 05:48:01 +02:00
name: QMC5883L Field Strength Z
heading:
2022-09-06 05:48:01 +02:00
name: QMC5883L Heading
range: 800uT
oversampling: 256x
2018-08-26 11:26:14 +02:00
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: hx711
2022-09-06 05:48:01 +02:00
name: HX711 Value
dout_pin:
allow_other_uses: true
number: GPIO23
clk_pin:
allow_other_uses: true
number: GPIO25
2018-08-26 11:26:14 +02:00
gain: 128
update_interval: 15s
- platform: ina219
address: 0x40
shunt_resistance: 0.1 ohm
current:
2022-09-06 05:48:01 +02:00
name: INA219 Current
2018-08-26 11:26:14 +02:00
power:
2022-09-06 05:48:01 +02:00
name: INA219 Power
2018-08-26 11:26:14 +02:00
bus_voltage:
2022-09-06 05:48:01 +02:00
name: INA219 Bus Voltage
2018-08-26 11:26:14 +02:00
shunt_voltage:
2022-09-06 05:48:01 +02:00
name: INA219 Shunt Voltage
2018-08-26 11:26:14 +02:00
max_voltage: 32.0V
max_current: 3.2A
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: ina226
address: 0x40
shunt_resistance: 0.1 ohm
current:
2022-09-06 05:48:01 +02:00
name: INA226 Current
power:
2022-09-06 05:48:01 +02:00
name: INA226 Power
bus_voltage:
2022-09-06 05:48:01 +02:00
name: INA226 Bus Voltage
shunt_voltage:
2022-09-06 05:48:01 +02:00
name: INA226 Shunt Voltage
max_current: 3.2A
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: ina3221
address: 0x40
channel_1:
shunt_resistance: 0.1 ohm
current:
2022-09-06 05:48:01 +02:00
name: INA3221 Channel 1 Current
2018-08-26 11:26:14 +02:00
power:
2022-09-06 05:48:01 +02:00
name: INA3221 Channel 1 Power
2018-08-26 11:26:14 +02:00
bus_voltage:
2022-09-06 05:48:01 +02:00
name: INA3221 Channel 1 Bus Voltage
2018-08-26 11:26:14 +02:00
shunt_voltage:
2022-09-06 05:48:01 +02:00
name: INA3221 Channel 1 Shunt Voltage
2018-08-26 11:26:14 +02:00
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: kmeteriso
temperature:
name: Outside Temperature
internal_temperature:
name: Internal Ttemperature
update_interval: 15s
i2c_id: i2c_bus
- platform: combination
type: kalman
2022-09-06 05:48:01 +02:00
name: Kalman-filtered temperature
process_std_dev: 0.00139
sources:
- source: scd30_temperature
error: !lambda |-
return 0.4 + std::abs(x - 25) * 0.023;
- source: scd4x_temperature
error: 1.5
- platform: combination
type: linear
name: Linearly combined temperatures
sources:
- source: scd30_temperature
coeffecient: !lambda |-
return 0.4 + std::abs(x - 25) * 0.023;
- source: scd4x_temperature
coeffecient: 1.5
- platform: combination
type: max
name: Max of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: mean
name: Mean of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: median
name: Median of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: min
name: Min of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: most_recently_updated
name: Most recently updated of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: range
name: Range of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
- platform: combination
type: sum
name: Sum of combined temperatures
sources:
- source: scd30_temperature
- source: scd4x_temperature
2018-08-26 11:26:14 +02:00
- platform: htu21d
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 6
2018-08-26 11:26:14 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 6
heater:
name: Living Room Heater 6
2018-08-26 11:26:14 +02:00
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: max6675
2022-09-06 05:48:01 +02:00
name: Living Room Temperature
cs_pin:
allow_other_uses: true
number: GPIO23
2018-08-26 11:26:14 +02:00
update_interval: 15s
- platform: max31855
2022-09-06 05:48:01 +02:00
name: Den Temperature
cs_pin:
allow_other_uses: true
number: GPIO23
update_interval: 15s
Add MAX31865 sensor support, fix MAX31855 sensor (#832) * Add MAX31865 sensor support, fix MAX31855 sensor. # MAX31865 Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100 probe. # MAX31855 This was setup for incorrect SPI clock polarity and phase, and would return bad data due to a race condition measuring on the wrong edge (verified with Saleae Logic scope). Selecting the correct configuration fixes that problem. Re-wrote the decode off the datasheet to handle error states better (sends NaN as an update on failure to read temperature, which shows the value as Unknown in Home Assistant). Added the *optional* ability to monitor the internal high-precision temperature sensor, which can be nice in some applications. * Tests for MAX31855/MAX38165. * Update style to match project rules. Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined multiple places. Missed this when I added them to const.py. * Update style to match project rules. Pylint line limit 101/100 ("missed it by that much"). Also apparently I can't read and patched the wrong line in max31855.cpp. * Minor string/style cleanup. There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had unnecessary whitespace. * Improve MAX31865 fault detection and logging. Log levels are more in-line with the documented descriptions. Fault detection code is improved. A transient fault between reads is still reported, but now only faults *during* a read cause the sensor to fail and return NAN ("unknown" in Home Assistant). * Update style to match project rules. I just now realized the .clang-format and pylintrc files are included. D'oh! * MAX31855 & MAX31865 code style alignment. @OttoWinter caught some style mismatches, updated to match project better. * Fix a lost '\' in max31865/sensor.py.
2019-11-06 13:56:43 +01:00
reference_temperature:
2022-09-06 05:48:01 +02:00
name: MAX31855 Internal Temperature
- platform: max31856
2022-09-06 05:48:01 +02:00
name: BBQ Temperature
cs_pin:
allow_other_uses: true
number: GPIO17
update_interval: 15s
mains_filter: 50Hz
Add MAX31865 sensor support, fix MAX31855 sensor (#832) * Add MAX31865 sensor support, fix MAX31855 sensor. # MAX31865 Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100 probe. # MAX31855 This was setup for incorrect SPI clock polarity and phase, and would return bad data due to a race condition measuring on the wrong edge (verified with Saleae Logic scope). Selecting the correct configuration fixes that problem. Re-wrote the decode off the datasheet to handle error states better (sends NaN as an update on failure to read temperature, which shows the value as Unknown in Home Assistant). Added the *optional* ability to monitor the internal high-precision temperature sensor, which can be nice in some applications. * Tests for MAX31855/MAX38165. * Update style to match project rules. Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined multiple places. Missed this when I added them to const.py. * Update style to match project rules. Pylint line limit 101/100 ("missed it by that much"). Also apparently I can't read and patched the wrong line in max31855.cpp. * Minor string/style cleanup. There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had unnecessary whitespace. * Improve MAX31865 fault detection and logging. Log levels are more in-line with the documented descriptions. Fault detection code is improved. A transient fault between reads is still reported, but now only faults *during* a read cause the sensor to fail and return NAN ("unknown" in Home Assistant). * Update style to match project rules. I just now realized the .clang-format and pylintrc files are included. D'oh! * MAX31855 & MAX31865 code style alignment. @OttoWinter caught some style mismatches, updated to match project better. * Fix a lost '\' in max31865/sensor.py.
2019-11-06 13:56:43 +01:00
- platform: max31865
2022-09-06 05:48:01 +02:00
name: Water Tank Temperature
cs_pin:
allow_other_uses: true
number: GPIO23
Add MAX31865 sensor support, fix MAX31855 sensor (#832) * Add MAX31865 sensor support, fix MAX31855 sensor. # MAX31865 Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100 probe. # MAX31855 This was setup for incorrect SPI clock polarity and phase, and would return bad data due to a race condition measuring on the wrong edge (verified with Saleae Logic scope). Selecting the correct configuration fixes that problem. Re-wrote the decode off the datasheet to handle error states better (sends NaN as an update on failure to read temperature, which shows the value as Unknown in Home Assistant). Added the *optional* ability to monitor the internal high-precision temperature sensor, which can be nice in some applications. * Tests for MAX31855/MAX38165. * Update style to match project rules. Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined multiple places. Missed this when I added them to const.py. * Update style to match project rules. Pylint line limit 101/100 ("missed it by that much"). Also apparently I can't read and patched the wrong line in max31855.cpp. * Minor string/style cleanup. There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had unnecessary whitespace. * Improve MAX31865 fault detection and logging. Log levels are more in-line with the documented descriptions. Fault detection code is improved. A transient fault between reads is still reported, but now only faults *during* a read cause the sensor to fail and return NAN ("unknown" in Home Assistant). * Update style to match project rules. I just now realized the .clang-format and pylintrc files are included. D'oh! * MAX31855 & MAX31865 code style alignment. @OttoWinter caught some style mismatches, updated to match project better. * Fix a lost '\' in max31865/sensor.py.
2019-11-06 13:56:43 +01:00
update_interval: 15s
2022-09-06 05:48:01 +02:00
reference_resistance: 430 Ω
rtd_nominal_resistance: 100 Ω
2018-08-26 11:26:14 +02:00
- platform: mhz19
uart_id: uart_0
2018-08-26 11:26:14 +02:00
co2:
2022-09-06 05:48:01 +02:00
name: MH-Z19 CO2 Value
2018-08-26 11:26:14 +02:00
temperature:
2022-09-06 05:48:01 +02:00
name: MH-Z19 Temperature
2018-08-26 11:26:14 +02:00
update_interval: 15s
automatic_baseline_calibration: false
2018-08-26 11:26:14 +02:00
- platform: mpu6050
address: 0x68
accel_x:
2022-09-06 05:48:01 +02:00
name: MPU6050 Accel X
2018-08-26 11:26:14 +02:00
accel_y:
2022-09-06 05:48:01 +02:00
name: MPU6050 Accel Y
2018-08-26 11:26:14 +02:00
accel_z:
2022-09-06 05:48:01 +02:00
name: MPU6050 Accel z
2018-08-26 11:26:14 +02:00
gyro_x:
2022-09-06 05:48:01 +02:00
name: MPU6050 Gyro X
2018-08-26 11:26:14 +02:00
gyro_y:
2022-09-06 05:48:01 +02:00
name: MPU6050 Gyro Y
2018-08-26 11:26:14 +02:00
gyro_z:
2022-09-06 05:48:01 +02:00
name: MPU6050 Gyro z
2018-08-26 11:26:14 +02:00
temperature:
2022-09-06 05:48:01 +02:00
name: MPU6050 Temperature
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2022-02-21 00:23:26 +01:00
- platform: mpu6886
address: 0x68
accel_x:
2022-09-06 05:48:01 +02:00
name: MPU6886 Accel X
2022-02-21 00:23:26 +01:00
accel_y:
2022-09-06 05:48:01 +02:00
name: MPU6886 Accel Y
2022-02-21 00:23:26 +01:00
accel_z:
2022-09-06 05:48:01 +02:00
name: MPU6886 Accel z
2022-02-21 00:23:26 +01:00
gyro_x:
2022-09-06 05:48:01 +02:00
name: MPU6886 Gyro X
2022-02-21 00:23:26 +01:00
gyro_y:
2022-09-06 05:48:01 +02:00
name: MPU6886 Gyro Y
2022-02-21 00:23:26 +01:00
gyro_z:
2022-09-06 05:48:01 +02:00
name: MPU6886 Gyro z
2022-02-21 00:23:26 +01:00
temperature:
2022-09-06 05:48:01 +02:00
name: MPU6886 Temperature
2022-02-21 00:23:26 +01:00
i2c_id: i2c_bus
- platform: bmi160
address: 0x68
acceleration_x:
name: BMI160 Accel X
acceleration_y:
name: BMI160 Accel Y
acceleration_z:
name: BMI160 Accel z
gyroscope_x:
name: BMI160 Gyro X
gyroscope_y:
name: BMI160 Gyro Y
gyroscope_z:
name: BMI160 Gyro z
temperature:
name: BMI160 Temperature
i2c_id: i2c_bus
- platform: mmc5603
address: 0x30
field_strength_x:
name: HMC5883L Field Strength X
field_strength_y:
name: HMC5883L Field Strength Y
field_strength_z:
name: HMC5883L Field Strength Z
i2c_id: i2c_bus
- platform: dps310
temperature:
2022-09-06 05:48:01 +02:00
name: DPS310 Temperature
pressure:
2022-09-06 05:48:01 +02:00
name: DPS310 Pressure
address: 0x77
update_interval: 15s
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: ms5611
temperature:
2022-09-06 05:48:01 +02:00
name: Outside Temperature
2018-08-26 11:26:14 +02:00
pressure:
2022-09-06 05:48:01 +02:00
name: Outside Pressure
2018-08-26 11:26:14 +02:00
address: 0x77
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: pmsa003i
pm_1_0:
2022-09-06 05:48:01 +02:00
name: PMSA003i PM1.0
pm_2_5:
2022-09-06 05:48:01 +02:00
name: PMSA003i PM2.5
pm_10_0:
2022-09-06 05:48:01 +02:00
name: PMSA003i PM10.0
pmc_0_3:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <0.3µm
pmc_0_5:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <0.5µm
pmc_1_0:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <1µm
pmc_2_5:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <2.5µm
pmc_5_0:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <5µm
pmc_10_0:
2022-09-06 05:48:01 +02:00
name: PMSA003i PMC <10µm
address: 0x12
2022-09-06 05:48:01 +02:00
standard_units: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: pulse_counter
2022-09-06 05:48:01 +02:00
name: Pulse Counter
pin:
ignore_strapping_warning: true
number: GPIO12
allow_other_uses: true
2018-08-26 11:26:14 +02:00
count_mode:
rising_edge: INCREMENT
falling_edge: DECREMENT
internal_filter: 13us
update_interval: 15s
- platform: pulse_meter
2022-09-06 05:48:01 +02:00
name: Pulse Meter
id: pulse_meter_sensor
pin:
ignore_strapping_warning: true
number: GPIO12
allow_other_uses: true
internal_filter: 100ms
timeout: 2 min
on_value:
- pulse_meter.set_total_pulses:
id: pulse_meter_sensor
value: 12345
total:
2022-09-06 05:48:01 +02:00
name: Pulse Meter Total
- platform: qmp6988
temperature:
2022-09-06 05:48:01 +02:00
name: Living Temperature QMP
oversampling: 32x
pressure:
2022-09-06 05:48:01 +02:00
name: Living Pressure QMP
oversampling: 2x
address: 0x70
update_interval: 30s
iir_filter: 16x
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: rotary_encoder
2022-09-06 05:48:01 +02:00
name: Rotary Encoder
id: rotary_encoder1
pin_a:
allow_other_uses: true
number: GPIO23
pin_b:
allow_other_uses: true
number: GPIO25
pin_reset:
allow_other_uses: true
number: GPIO25
2018-08-26 11:26:14 +02:00
filters:
- or:
2020-11-20 03:59:19 +01:00
- debounce: 0.1s
- delta: 10
resolution: 4
min_value: -10
max_value: 30
on_value:
- sensor.rotary_encoder.set_value:
id: rotary_encoder1
value: 10
- sensor.rotary_encoder.set_value:
id: rotary_encoder1
value: !lambda "return -1;"
on_clockwise:
2022-09-06 05:48:01 +02:00
- logger.log: Clockwise
- display_menu.down: test_lcd_menu
- display_menu.down: test_graphical_display_menu
on_anticlockwise:
2022-09-06 05:48:01 +02:00
- logger.log: Anticlockwise
- display_menu.up: test_lcd_menu
- display_menu.up: test_graphical_display_menu
- platform: pulse_width
name: Pulse Width
pin:
allow_other_uses: true
number: GPIO12
- platform: sm300d2
uart_id: uart_0
co2:
2022-09-06 05:48:01 +02:00
name: SM300D2 CO2 Value
formaldehyde:
2022-09-06 05:48:01 +02:00
name: SM300D2 Formaldehyde Value
tvoc:
2022-09-06 05:48:01 +02:00
name: SM300D2 TVOC Value
pm_2_5:
2022-09-06 05:48:01 +02:00
name: SM300D2 PM2.5 Value
pm_10_0:
2022-09-06 05:48:01 +02:00
name: SM300D2 PM10 Value
temperature:
2022-09-06 05:48:01 +02:00
name: SM300D2 Temperature Value
humidity:
2022-09-06 05:48:01 +02:00
name: SM300D2 Humidity Value
update_interval: 60s
2018-08-26 11:26:14 +02:00
- platform: sht3xd
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 8
2018-08-26 11:26:14 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 8
2018-08-26 11:26:14 +02:00
address: 0x44
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
update_interval: 15s
- platform: sts3x
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 9
address: 0x4A
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: scd30
co2:
2022-09-06 05:48:01 +02:00
name: Living Room CO2 9
temperature:
id: scd30_temperature
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 9
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 9
address: 0x61
update_interval: 15s
automatic_self_calibration: true
altitude_compensation: 10m
ambient_pressure_compensation: 961mBar
temperature_offset: 4.2C
i2c_id: i2c_bus
- platform: scd4x
id: scd40
co2:
2022-09-06 05:48:01 +02:00
name: SCD4X CO2
temperature:
id: scd4x_temperature
2022-09-06 05:48:01 +02:00
name: SCD4X Temperature
humidity:
2022-09-06 05:48:01 +02:00
name: SCD4X Humidity
update_interval: 15s
automatic_self_calibration: true
altitude_compensation: 10m
ambient_pressure_compensation: 961mBar
temperature_offset: 4.2C
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: sfa30
formaldehyde:
name: "SFA30 formaldehyde"
temperature:
name: "SFA30 temperature"
humidity:
name: "SFA30 humidity"
i2c_id: i2c_bus
address: 0x5D
update_interval: 30s
- platform: sen0321
name: Workshop Ozone Sensor
id: sen0321_ozone
update_interval: 10s
i2c_id: i2c_bus
- platform: sgp30
eco2:
2022-09-06 05:48:01 +02:00
name: Workshop eCO2
accuracy_decimals: 1
tvoc:
2022-09-06 05:48:01 +02:00
name: Workshop TVOC
accuracy_decimals: 1
address: 0x58
update_interval: 5s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: sps30
pm_1_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <1µm Weight concentration
id: workshop_PM_1_0
pm_2_5:
2022-09-06 05:48:01 +02:00
name: Workshop PM <2.5µm Weight concentration
id: workshop_PM_2_5
pm_4_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <4µm Weight concentration
id: workshop_PM_4_0
pm_10_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <10µm Weight concentration
id: workshop_PM_10_0
pmc_0_5:
2022-09-06 05:48:01 +02:00
name: Workshop PM <0.5µm Number concentration
id: workshop_PMC_0_5
pmc_1_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <1µm Number concentration
id: workshop_PMC_1_0
pmc_2_5:
2022-09-06 05:48:01 +02:00
name: Workshop PM <2.5µm Number concentration
id: workshop_PMC_2_5
pmc_4_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <4µm Number concentration
id: workshop_PMC_4_0
pmc_10_0:
2022-09-06 05:48:01 +02:00
name: Workshop PM <10µm Number concentration
id: workshop_PMC_10_0
address: 0x69
update_interval: 10s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2021-04-28 10:22:46 +02:00
- platform: sht4x
temperature:
2022-09-06 05:48:01 +02:00
name: SHT4X Temperature
2021-04-28 10:22:46 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: SHT4X Humidity
2021-04-28 10:22:46 +02:00
address: 0x44
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: shtcx
2019-10-19 21:59:55 +02:00
temperature:
2022-09-06 05:48:01 +02:00
name: Living Room Temperature 10
2019-10-19 21:59:55 +02:00
humidity:
2022-09-06 05:48:01 +02:00
name: Living Room Humidity 10
2019-10-19 21:59:55 +02:00
address: 0x70
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: template
2022-09-06 05:48:01 +02:00
name: Template Sensor
state_class: measurement
id: template_sensor
lambda: |-
if (id(ultrasonic_sensor1).state > 1) {
2018-08-26 11:26:14 +02:00
return 42.0;
} else {
return {};
}
update_interval: 15s
on_value:
- sensor.template.publish:
id: template_sensor
state: 43.0
- sensor.template.publish:
id: template_sensor
state: !lambda "return NAN;"
2018-08-26 11:26:14 +02:00
- platform: tsl2561
2022-09-06 05:48:01 +02:00
name: TSL2561 Ambient Light
2018-08-26 11:26:14 +02:00
address: 0x39
update_interval: 15s
is_cs_package: true
integration_time: 402ms
gain: 16x
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: tsl2591
id: this_little_light_of_mine
address: 0x29
update_interval: 15s
integration_time: 600ms
gain: high
visible:
2022-09-06 05:48:01 +02:00
name: tsl2591 visible
id: tsl2591_vis
2022-09-06 05:48:01 +02:00
unit_of_measurement: pH
infrared:
2022-09-06 05:48:01 +02:00
name: tsl2591 infrared
id: tsl2591_ir
full_spectrum:
2022-09-06 05:48:01 +02:00
name: tsl2591 full_spectrum
id: tsl2591_fs
calculated_lux:
2022-09-06 05:48:01 +02:00
name: tsl2591 calculated_lux
id: tsl2591_cl
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: veml3235
id: veml3235_sensor
name: VEML3235 Light Sensor
i2c_id: i2c_bus
auto_gain: true
auto_gain_threshold_high: 90%
auto_gain_threshold_low: 15%
digital_gain: 1X
gain: 1X
integration_time: 50ms
2023-01-17 22:43:16 +01:00
- platform: tee501
name: Office Temperature 3
address: 0x48
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
- platform: ultrasonic
trigger_pin:
allow_other_uses: true
number: GPIO25
2018-08-26 11:26:14 +02:00
echo_pin:
number: GPIO23
allow_other_uses: true
2018-08-26 11:26:14 +02:00
inverted: true
2022-09-06 05:48:01 +02:00
name: Ultrasonic Sensor
timeout: 5.5m
2018-08-26 11:26:14 +02:00
id: ultrasonic_sensor1
- platform: uptime
name: Uptime Sensor
- id: !extend ${devicename}_uptime_pcg
unit_of_measurement: s
2018-08-26 11:26:14 +02:00
- platform: wifi_signal
2022-09-06 05:48:01 +02:00
name: WiFi Signal Sensor
2018-08-26 11:26:14 +02:00
update_interval: 15s
- platform: mqtt_subscribe
2022-09-06 05:48:01 +02:00
name: MQTT Subscribe Sensor 1
topic: mqtt/topic
id: the_sensor
qos: 2
on_value:
- mqtt.publish_json:
topic: the/topic
payload: |-
root["key"] = id(the_sensor).state;
root["greeting"] = "Hello World";
- platform: sds011
uart_id: uart_0
pm_2_5:
2022-09-06 05:48:01 +02:00
name: SDS011 PM2.5
pm_10_0:
2022-09-06 05:48:01 +02:00
name: SDS011 PM10.0
update_interval: 5min
rx_only: false
- platform: ccs811
eco2:
name: CCS811 eCO2
tvoc:
name: CCS811 TVOC
update_interval: 30s
baseline: 0x4242
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: tx20
wind_speed:
2022-09-06 05:48:01 +02:00
name: Windspeed
wind_direction_degrees:
2022-09-06 05:48:01 +02:00
name: Winddirection Degrees
pin:
number: GPIO04
mode: INPUT
allow_other_uses: true
- platform: zyaura
clock_pin:
allow_other_uses: true
number: GPIO5
data_pin:
allow_other_uses: true
number: GPIO4
co2:
2022-09-06 05:48:01 +02:00
name: ZyAura CO2
temperature:
2022-09-06 05:48:01 +02:00
name: ZyAura Temperature
humidity:
2022-09-06 05:48:01 +02:00
name: ZyAura Humidity
2019-10-12 17:03:01 +02:00
- platform: as3935
lightning_energy:
2022-09-06 05:48:01 +02:00
name: Lightning Energy
distance:
2022-09-06 05:48:01 +02:00
name: Distance Storm
- platform: tmp117
2022-09-06 05:48:01 +02:00
name: TMP117 Temperature
update_interval: 5s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: hm3301
pm_1_0:
2022-09-06 05:48:01 +02:00
name: PM1.0
pm_2_5:
2022-09-06 05:48:01 +02:00
name: PM2.5
pm_10_0:
2022-09-06 05:48:01 +02:00
name: PM10.0
aqi:
2022-09-06 05:48:01 +02:00
name: AQI
calculation_type: CAQI
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: teleinfo
2022-09-06 05:48:01 +02:00
tag_name: HCHC
name: hchc
unit_of_measurement: Wh
icon: mdi:flash
teleinfo_id: myteleinfo
- platform: mcp9808
2022-09-06 05:48:01 +02:00
name: MCP9808 Temperature
update_interval: 15s
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: ezo
id: ph_ezo
address: 99
2022-09-06 05:48:01 +02:00
unit_of_measurement: pH
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: sdp3x
2022-09-06 05:48:01 +02:00
name: HVAC Filter Pressure drop
id: filter_pressure
update_interval: 5s
accuracy_decimals: 3
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: cs5460a
id: cs5460a1
current:
2022-09-06 05:48:01 +02:00
name: Socket current
voltage:
2022-09-06 05:48:01 +02:00
name: Mains voltage
power:
2022-09-06 05:48:01 +02:00
name: Socket power
on_value:
then:
cs5460a.restart: cs5460a1
samples: 1600
pga_gain: 10X
current_gain: 0.01
voltage_gain: 0.000573
2022-09-06 05:48:01 +02:00
current_hpf: true
voltage_hpf: true
phase_offset: 20
pulse_energy: 0.01 kWh
cs_pin:
mcp23xxx: mcp23017_hub
number: 14
- platform: max9611
i2c_id: i2c_bus
shunt_resistance: 0.2 ohm
2022-09-06 05:48:01 +02:00
gain: 1X
voltage:
name: Max9611 Voltage
current:
name: Max9611 Current
power:
name: Max9611 Watts
temperature:
name: Max9611 Temp
update_interval: 1s
- platform: mlx90614
i2c_id: i2c_bus
ambient:
name: Ambient
object:
name: Object
emissivity: 1.0
- platform: mpl3115a2
i2c_id: i2c_bus
temperature:
name: "MPL3115A2 Temperature"
pressure:
name: "MPL3115A2 Pressure"
update_interval: 10s
- platform: alpha3
ble_client_id: ble_foo
flow:
name: "Radiator Pump Flow"
head:
name: "Radiator Pump Head"
power:
name: "Radiator Pump Power"
speed:
name: "Radiator Pump Speed"
- platform: ld2410
light:
name: light
moving_distance:
name: "Moving distance (cm)"
still_distance:
name: "Still Distance (cm)"
moving_energy:
name: "Move Energy (%)"
still_energy:
name: "Still Energy (%)"
detection_distance:
name: "Distance Detection (cm)"
g0:
move_energy:
name: g0 move energy
still_energy:
name: g0 still energy
g1:
move_energy:
name: g1 move energy
still_energy:
name: g1 still energy
g2:
move_energy:
name: g2 move energy
still_energy:
name: g2 still energy
g3:
move_energy:
name: g3 move energy
still_energy:
name: g3 still energy
g4:
move_energy:
name: g4 move energy
still_energy:
name: g4 still energy
g5:
move_energy:
name: g5 move energy
still_energy:
name: g5 still energy
g6:
move_energy:
name: g6 move energy
still_energy:
name: g6 still energy
g7:
move_energy:
name: g7 move energy
still_energy:
name: g7 still energy
g8:
move_energy:
name: g8 move energy
still_energy:
name: g8 still energy
- platform: ld2420
moving_distance:
name: "Moving distance (cm)"
add person sensor (SEN21231) from usefulsensors (#4454) * add person sensor (SEN21231) from usefulsensors * add person sensor (SEN21231) from usefulsensors * change file mode * fix tests * fix tests * rollback un-intended changes * Update esphome/components/sen21231/sen21231.cpp Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.cpp Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.cpp Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.cpp Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.cpp Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.h Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * remove unused import * Update esphome/components/sen21231/sen21231.h Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Apply suggestions from code review Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sensor.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.h Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * Update esphome/components/sen21231/sen21231.h Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com> * remove unused import * Update sen21231.h * lint changes * linting * linting * Update sen21231.h * Update sen21231.cpp linting * linting fixes * fix codeowners --------- Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-23 01:37:23 +01:00
- platform: sen21231
name: "Person Sensor"
i2c_id: i2c_bus
- platform: fs3000
name: "Air Velocity"
model: 1005
update_interval: 60s
i2c_id: i2c_bus
- platform: absolute_humidity
name: DHT Absolute Humidity
temperature: dht_temperature
humidity: dht_humidity
- platform: hyt271
i2c_id: i2c_bus
temperature:
name: "Temperature hyt271"
id: temp_etuve
humidity:
name: "Humidity hyt271"
- platform: iaqcore
i2c_id: i2c_bus
co2:
name: "iAQ Core CO2 Sensor"
tvoc:
name: "iAQ Core TVOC Sensor"
- platform: tmp1075
name: "Temperature TMP1075"
update_interval: 10s
i2c_id: i2c_bus
conversion_rate: 27.5ms
alert:
limit_low: 50
limit_high: 75
fault_count: 1
polarity: active_high
function: comparator
- platform: zio_ultrasonic
name: "Distance"
update_interval: 60s
i2c_id: i2c_bus
- platform: bmp581
i2c_id: i2c_bus
temperature:
name: "BMP581 Temperature"
iir_filter: 2x
pressure:
name: "BMP581 Pressure"
oversampling: 128x
- platform: debug
free:
name: "Heap Free"
block:
name: "Heap Max Block"
loop_time:
name: "Loop Time"
psram:
name: "PSRAM Free"
- platform: mmc5983
i2c_id: i2c_bus
field_strength_x:
name: "Magnet X"
id: magnet_x
field_strength_y:
name: "Magnet Y"
id: magnet_y
field_strength_z:
name: "Magnet Z"
id: magnet_z
- platform: micronova
room_temperature:
name: Room Temperature
fumes_temperature:
name: Fumes Temperature
water_temperature:
name: Water temperature
water_pressure:
name: Water pressure
stove_power:
name: Stove Power
fan_speed:
fan_rpm_offset: 240
name: Fan RPM
memory_address_sensor:
memory_location: 0x20
memory_address: 0x7d
name: Adres sensor
- platform: ade7880
i2c_id: i2c_bus
irq0_pin:
number: GPIO13
allow_other_uses: true
irq1_pin:
number: GPIO5
allow_other_uses: true
reset_pin:
number: GPIO16
allow_other_uses: true
frequency: 60Hz
phase_a:
name: Channel A
voltage: Voltage
current: Current
active_power: Active Power
power_factor: Power Factor
forward_active_energy: Forward Active Energy
reverse_active_energy: Reverse Active Energy
calibration:
current_gain: 3116628
voltage_gain: -757178
power_gain: -1344457
phase_angle: 188
phase_b:
name: Channel B
voltage: Voltage
current: Current
active_power: Active Power
power_factor: Power Factor
forward_active_energy: Forward Active Energy
reverse_active_energy: Reverse Active Energy
calibration:
current_gain: 3133655
voltage_gain: -755235
power_gain: -1345638
phase_angle: 188
phase_c:
name: Channel C
voltage: Voltage
current: Current
active_power: Active Power
power_factor: Power Factor
forward_active_energy: Forward Active Energy
reverse_active_energy: Reverse Active Energy
calibration:
current_gain: 3111158
voltage_gain: -743813
power_gain: -1351437
phase_angle: 180
neutral:
name: Neutral
current: Current
calibration:
current_gain: 3189
psram:
2018-08-26 11:26:14 +02:00
esp32_touch:
2022-09-06 05:48:01 +02:00
setup_mode: false
2018-08-26 11:26:14 +02:00
iir_filter: 10ms
sleep_duration: 27ms
measurement_duration: 8ms
low_voltage_reference: 0.5V
high_voltage_reference: 2.7V
voltage_attenuation: 1.5V
binary_sensor:
- platform: gpio
name: "MCP23S08 Pin #1"
pin:
mcp23xxx: mcp23s08_hub
# Use pin number 1
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT_PULLUP
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
name: "MCP23S17 Pin #1"
pin:
mcp23xxx: mcp23s17_hub
# Use pin number 1
number: 1
allow_other_uses: true
# One of INPUT or INPUT_PULLUP
mode: INPUT_PULLUP
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
name: "MCP23S17 Pin #1 with interrupt"
pin:
mcp23xxx: mcp23s17_hub
# Use pin number 1
allow_other_uses: true
number: 1
# One of INPUT or INPUT_PULLUP
mode: INPUT_PULLUP
2022-09-06 05:48:01 +02:00
inverted: false
interrupt: FALLING
2018-08-26 11:26:14 +02:00
- platform: gpio
pin:
allow_other_uses: true
number: GPIO9
2022-09-06 05:48:01 +02:00
name: Living Room Window
2018-08-26 11:26:14 +02:00
device_class: window
filters:
- invert:
- delayed_on_off: 40ms
- delayed_on_off:
time_on: 10s
time_off: !lambda "return 1000;"
2018-08-26 11:26:14 +02:00
- delayed_on: 40ms
- delayed_off: 40ms
- delayed_on_off: !lambda "return 10;"
- delayed_on: !lambda "return 1000;"
- delayed_off: !lambda "return 0;"
- settle: 40ms
- settle: !lambda "return 10;"
2018-08-26 11:26:14 +02:00
on_press:
then:
- lambda: >-
ESP_LOGD("main", "Pressed");
on_release:
then:
- lambda: >-
ESP_LOGD("main", "Released");
on_click:
- min_length: 50ms
max_length: 350ms
then:
- lambda: >-
ESP_LOGD("main", "Clicked");
- then:
- lambda: >-
ESP_LOGD("main", "Clicked");
on_double_click:
- min_length: 50ms
max_length: 350ms
then:
2020-11-20 03:59:19 +01:00
- lambda: >-
ESP_LOGD("main", "Double Clicked");
2018-08-26 11:26:14 +02:00
- then:
2020-11-20 03:59:19 +01:00
- lambda: >-
ESP_LOGD("main", "Double Clicked");
on_multi_click:
2020-11-20 03:59:19 +01:00
- timing:
- ON for at most 1s
- OFF for at most 1s
- ON for at most 1s
- OFF for at least 0.2s
then:
- logger.log:
2022-09-06 05:48:01 +02:00
format: Multi Clicked TWO
2020-11-20 03:59:19 +01:00
level: warn
- timing:
- OFF for 1s to 2s
- ON for 1s to 2s
- OFF for at least 0.5s
then:
- logger.log:
2022-09-06 05:48:01 +02:00
format: Multi Clicked LONG SINGLE
2020-11-20 03:59:19 +01:00
level: warn
- timing:
- ON for at most 1s
- OFF for at least 0.5s
then:
- logger.log:
2022-09-06 05:48:01 +02:00
format: Multi Clicked SINGLE
2020-11-20 03:59:19 +01:00
level: warn
2018-08-26 11:26:14 +02:00
id: binary_sensor1
2018-12-02 13:16:02 +01:00
- platform: gpio
pin:
number: GPIO9
allow_other_uses: true
2018-12-02 13:16:02 +01:00
mode: INPUT_PULLUP
2022-09-06 05:48:01 +02:00
name: Living Room Window 2
- platform: gpio
pin:
number: GPIO9
allow_other_uses: true
mode: INPUT_OUTPUT_OPEN_DRAIN
name: Living Room Button
2018-08-26 11:26:14 +02:00
- platform: status
2022-09-06 05:48:01 +02:00
name: Living Room Status
2018-08-26 11:26:14 +02:00
- platform: esp32_touch
2022-09-06 05:48:01 +02:00
name: ESP32 Touch Pad GPIO27
2018-08-26 11:26:14 +02:00
pin: GPIO27
threshold: 1000
id: btn_left
on_press:
- if:
condition:
display_menu.is_active: test_lcd_menu
then:
- display_menu.enter: test_lcd_menu
else:
- display_menu.left: test_lcd_menu
- display_menu.right: test_lcd_menu
- display_menu.show: test_lcd_menu
- if:
condition:
display_menu.is_active: test_graphical_display_menu
then:
- display_menu.enter: test_graphical_display_menu
else:
- display_menu.left: test_graphical_display_menu
- display_menu.right: test_graphical_display_menu
- display_menu.show: test_graphical_display_menu
2018-08-26 11:26:14 +02:00
- platform: template
2022-09-06 05:48:01 +02:00
name: Garage Door Open
id: garage_door
lambda: |-
if (isnan(id(${sensorname}_sensor).state)) {
2018-08-26 11:26:14 +02:00
// isnan checks if the ultrasonic sensor echo
// has timed out, resulting in a NaN (not a number) state
// in that case, return {} to indicate that we don't know.
return {};
} else if (id(${sensorname}_sensor).state > 30) {
2018-08-26 11:26:14 +02:00
// Garage Door is open.
return true;
} else {
// Garage Door is closed.
return false;
}
on_press:
- binary_sensor.template.publish:
id: garage_door
2022-09-06 05:48:01 +02:00
state: false
- output.ledc.set_frequency:
id: gpio_19
frequency: 500.0Hz
- output.ledc.set_frequency:
id: gpio_19
frequency: !lambda "return 500.0;"
2018-08-26 11:26:14 +02:00
- platform: pn532
pn532_id: pn532_bs
2018-08-26 11:26:14 +02:00
uid: 74-10-37-94
2022-09-06 05:48:01 +02:00
name: PN532 NFC Tag
2018-08-26 11:26:14 +02:00
- platform: rdm6300
uid: 7616525
2022-09-06 05:48:01 +02:00
name: RDM6300 NFC Tag
2018-08-26 11:26:14 +02:00
- platform: gpio
2022-09-06 05:48:01 +02:00
name: PCF binary sensor
2018-08-26 11:26:14 +02:00
pin:
pcf8574: pcf8574_hub
number: 1
mode: INPUT
2022-09-06 05:48:01 +02:00
inverted: true
2022-12-22 06:39:25 +01:00
- platform: gpio
name: PCA9554 binary sensor
pin:
pca9554: pca9554_hub
number: 1
mode: INPUT
inverted: true
2023-05-01 06:00:21 +02:00
- platform: gpio
name: PCA6416A binary sensor
pin:
pca6416a: pca6416a_hub
number: 15
mode: INPUT
inverted: true
- platform: gpio
2022-09-06 05:48:01 +02:00
name: MCP21 binary sensor
pin:
mcp23xxx: mcp23017_hub
number: 1
allow_other_uses: true
mode: INPUT
2022-09-06 05:48:01 +02:00
inverted: true
- platform: gpio
2022-09-06 05:48:01 +02:00
name: MCP22 binary sensor
pin:
mcp23xxx: mcp23008_hub
number: 7
mode: INPUT_PULLUP
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
2022-09-06 05:48:01 +02:00
name: MCP23 binary sensor
pin:
mcp23016: mcp23016_hub
number: 7
mode: INPUT
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
name: Speed Fan Cycle binary sensor"
pin:
number: 18
allow_other_uses: true
mode:
input: true
pulldown: true
on_press:
- fan.cycle_speed:
id: fan_speed
2024-02-21 05:14:30 +01:00
off_speed_cycle: false
- logger.log: "Cycle speed clicked"
- platform: remote_receiver
2022-09-06 05:48:01 +02:00
name: Raw Remote Receiver Test
raw:
2020-11-20 03:59:19 +01:00
code:
[
5685,
-4252,
1711,
-2265,
1712,
-2265,
1711,
-2264,
1712,
-2266,
3700,
-2263,
1712,
-4254,
1711,
-4249,
1715,
-2266,
1710,
-2267,
1709,
-2265,
3704,
-4250,
1712,
-4254,
3700,
-2260,
1714,
-2265,
1712,
-2262,
1714,
-2267,
1709,
]
- platform: remote_receiver
name: Coolix Test 1
coolix: 0xB21F98
- platform: remote_receiver
name: Coolix Test 2
coolix:
first: 0xB2E003
- platform: remote_receiver
name: Coolix Test 3
coolix:
first: 0xB2E003
second: 0xB21F98
2019-10-12 17:03:01 +02:00
- platform: as3935
2022-09-06 05:48:01 +02:00
name: Storm Alert
- platform: analog_threshold
name: Analog Trheshold 1
sensor_id: template_sensor
2022-02-19 14:42:54 +01:00
threshold:
upper: 110
lower: 90
2022-02-19 14:42:54 +01:00
filters:
- delayed_on: 0s
- delayed_off: 10s
- platform: analog_threshold
name: Analog Trheshold 2
sensor_id: template_sensor
threshold: 100
2022-02-19 14:42:54 +01:00
filters:
- invert:
- platform: template
id: open_endstop_sensor
- platform: template
id: open_sensor
- platform: template
id: open_obstacle_sensor
- platform: template
id: close_endstop_sensor
- platform: template
id: close_sensor
- platform: template
id: close_obstacle_sensor
- platform: ld2410
has_target:
name: presence
has_moving_target:
name: movement
has_still_target:
name: still
out_pin_presence_status:
name: out pin presence status
- platform: qwiic_pir
i2c_id: i2c_bus
name: "Qwiic PIR Motion Sensor"
- platform: dfrobot_sen0395
id: mmwave_detected_uart
dfrobot_sen0395_id: mmwave
2024-01-16 09:05:13 +01:00
- platform: nfc
nfcc_id: nfcc_pn7160_i2c
ndef_contains: pulse
name: MFC Tag 1
- platform: nfc
nfcc_id: nfcc_pn7160_i2c
tag_id: pulse
name: MFC Tag 2
- platform: nfc
nfcc_id: nfcc_pn7160_i2c
uid: 59-FC-AB-15
name: MFC Tag 3
2018-08-26 11:26:14 +02:00
pca9685:
frequency: 500
address: 0x0
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-08-26 11:26:14 +02:00
tlc59208f:
- address: 0x20
id: tlc59208f_1
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- address: 0x22
id: tlc59208f_2
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- address: 0x24
id: tlc59208f_3
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2018-11-13 16:51:30 +01:00
my9231:
data_pin:
allow_other_uses: true
number: GPIO12
clock_pin:
allow_other_uses: true
number: GPIO14
2018-11-13 16:51:30 +01:00
num_channels: 6
num_chips: 2
bit_depth: 16
sm2235:
data_pin:
2023-12-21 05:37:02 +01:00
allow_other_uses: true
number: GPIO4
clock_pin:
2023-12-21 05:37:02 +01:00
allow_other_uses: true
number: GPIO5
max_power_color_channels: 9
max_power_white_channels: 9
sm2335:
data_pin:
2023-12-21 05:37:02 +01:00
allow_other_uses: true
number: GPIO4
clock_pin:
2023-12-21 05:37:02 +01:00
allow_other_uses: true
number: GPIO5
max_power_color_channels: 9
max_power_white_channels: 9
bp1658cj:
data_pin:
allow_other_uses: true
number: GPIO3
clock_pin:
allow_other_uses: true
number: GPIO5
max_power_color_channels: 4
max_power_white_channels: 6
bp5758d:
data_pin:
allow_other_uses: true
number: GPIO3
clock_pin:
allow_other_uses: true
number: GPIO5
2018-08-26 11:26:14 +02:00
output:
- platform: gpio
pin:
allow_other_uses: true
number: GPIO26
2018-08-26 11:26:14 +02:00
id: gpio_26
power_supply: atx_power_supply
2022-09-06 05:48:01 +02:00
inverted: false
2018-08-26 11:26:14 +02:00
- platform: ledc
pin:
allow_other_uses: true
number: 19
2018-08-26 11:26:14 +02:00
id: gpio_19
frequency: 1500Hz
channel: 14
max_power: 0.5
- platform: pca9685
id: pca_0
channel: 0
- platform: pca9685
id: pca_1
channel: 1
- platform: pca9685
id: pca_2
channel: 2
- platform: pca9685
id: pca_3
channel: 3
- platform: pca9685
id: pca_4
channel: 4
- platform: pca9685
id: pca_5
channel: 5
- platform: pca9685
id: pca_6
channel: 6
- platform: pca9685
id: pca_7
channel: 7
- platform: tlc59208f
id: tlc_0
channel: 0
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_1
- platform: tlc59208f
id: tlc_1
channel: 1
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_1
- platform: tlc59208f
id: tlc_2
channel: 2
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_1
- platform: tlc59208f
id: tlc_3
channel: 0
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_2
- platform: tlc59208f
id: tlc_4
channel: 1
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_2
- platform: tlc59208f
id: tlc_5
channel: 2
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_2
- platform: tlc59208f
id: tlc_6
channel: 0
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_3
- platform: tlc59208f
id: tlc_7
channel: 1
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_3
- platform: tlc59208f
id: tlc_8
channel: 2
2022-09-06 05:48:01 +02:00
tlc59208f_id: tlc59208f_3
2018-08-26 11:26:14 +02:00
- platform: gpio
id: id2
pin:
pcf8574: pcf8574_hub
number: 0
2024-02-21 05:14:30 +01:00
# allow_other_uses: true
2018-08-26 11:26:14 +02:00
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
2022-12-22 06:39:25 +01:00
- platform: gpio
id: id26
pin:
pca9554: pca9554_hub
number: 0
2024-02-21 05:14:30 +01:00
# allow_other_uses: true
2022-12-22 06:39:25 +01:00
mode: OUTPUT
inverted: false
- platform: gpio
id: id22
pin:
mcp23xxx: mcp23017_hub
number: 0
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
id: id23
pin:
mcp23xxx: mcp23008_hub
number: 0
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
id: id25
pin:
mcp23016: mcp23016_hub
number: 0
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
2018-11-13 16:51:30 +01:00
- platform: my9231
id: my_0
channel: 0
- platform: my9231
id: my_1
channel: 1
- platform: my9231
id: my_2
channel: 2
- platform: my9231
id: my_3
channel: 3
- platform: my9231
id: my_4
channel: 4
- platform: my9231
id: my_5
channel: 5
- platform: sm2235
id: sm2235_red
channel: 1
- platform: sm2235
id: sm2235_green
channel: 0
- platform: sm2235
id: sm2235_blue
channel: 2
- platform: sm2235
id: sm2235_coldwhite
channel: 4
- platform: sm2235
id: sm2235_warmwhite
channel: 3
- platform: sm2335
id: sm2335_red
channel: 1
- platform: sm2335
id: sm2335_green
channel: 0
- platform: sm2335
id: sm2335_blue
channel: 2
- platform: sm2335
id: sm2335_coldwhite
channel: 4
- platform: sm2335
id: sm2335_warmwhite
channel: 3
- platform: slow_pwm
id: id24
pin:
allow_other_uses: true
number: GPIO26
period: 15s
Add AC Dimmer support (#880) * Add AC Dimmer support Fixes https://github.com/esphome/feature-requests/issues/278 * fixes basically missed the output pin setup and in the switching was switching true true true :P * Format * Enable ESP32 * Also setup ZC pin * Support multiple dimmers sharing ZC pin * Fix ESP32 * Lint * off gate on zc detect * tests pins validation * Climate Mitsubishi (#725) * add climate * Mitsubishi updates * refactor mitsubishi to use climate_ir * lint * fix: only decode when not str already (#923) Signed-off-by: wilmardo <info@wilmardenouden.nl> * fix climate-ir bad merge (#935) * fix climate-ir bad merge * add mitshubishi test * http_request: fix memory allocation (#916) * http_request version fix (#917) * PID Climate (#885) * PID Climate * Add sensor for debugging PID output value * Add dump_config, use percent * Add more observable values * Update * Set target temperature * Add autotuner * Add algorithm explanation * Add autotuner action, update controller * Add simulator * Format * Change defaults * Updates * Use b''.decode() instead of str(b'') (#941) Handling of request arguments in WizardRequestHandler is not decoding bytes and rather just doing a str conversion resulting in a value of "b''" being supplied to the wizard code. * Adding the espressif 2.6.3 (#944) * extract and use current version of python 3 (#938) * Inverted output in neopixelbus (#895) * Added inverted output * Added support for inverted output in neopixelbus * Update esphome/components/neopixelbus/light.py Co-Authored-By: Otto Winter <otto@otto-winter.com> * Update light.py * corrected lint errors Co-authored-by: Otto Winter <otto@otto-winter.com> * Added degree symbol for MAX7219 7-segment display. (#764) The ascii char to use it is "~" (0x7E). Disclaimer: I didn't test this yet. * Fix dump/tx of 64 bit codes (#940) * Fix dump/tx of 64 bit codes * fixed source format * Update hdc1080.cpp (#887) * Update hdc1080.cpp increase waittime, to fix reading errors * Fix: Update HDC1080.cpp i fixed the my change on write_bytes * add tcl112 support for dry, fan and swing (#939) * Fix SGP30 incorrect baseline reading/writing (#936) * Split the SGP30 baseline into 2 values - According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first) - The current implementation ignores the MSB of each of the value - Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply) * Make both eCO2 and TVOC required if the optional baseline is defined * Make dump_config() looks better * Add register_*_effect to allow registering custom effects (#947) This allows to register custom effect from user components, allowing for bigger composability of source. * Bugfix/normalize core comparisons (and Python 3 update fixes) (#952) * Correct implementation of comparisons to be Pythonic If a comparison cannot be made return NotImplemented, this allows the Python interpreter to try other comparisons (eg __ieq__) and either return False (in the case of __eq__) or raise a TypeError exception (eg in the case of __lt__). * Python 3 updates * Add a more helpful message in exception if platform is not defined * Added a basic pre-commit check * Add transmit pioneer (#922) * Added pioneer_protocol to support transmit_pioneer * Display tm1637 (#946) * add TM1637 support * Support a further variant of Xiaomi CGG1 (#930) * Daikin climate ir component (#964) * Daikin ARC43XXX IR remote controller support * Format and lint fixes * Check temperature values against allowed min/max * fix tm1637 missing __init__.py (#975) * Add AC Dimmer support Fixes https://github.com/esphome/feature-requests/issues/278 * fixes basically missed the output pin setup and in the switching was switching true true true :P * Format * Enable ESP32 * Also setup ZC pin * Support multiple dimmers sharing ZC pin * Fix ESP32 * Lint * off gate on zc detect * tests pins validation * fix esp8266 many dimmers, changed timing * Increased value resolution, added min power * use min_power from base class * fix min_power. add init with half cycle * added method for trailing pulse, trailing and leading * fix method name. try filter invalid falling pulse * renamed to ac_dimmer * fix ESP32 not configuring zero cross twice Co-authored-by: Guillermo Ruffino <glm.net@gmail.com> Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com> Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com> Co-authored-by: Tim Savage <tim@savage.company> Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com> Co-authored-by: gitolicious <mrjchn@gmail.com> Co-authored-by: voibit <krestean@gmail.com> Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com> Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com> Co-authored-by: dmkif <dmkif@users.noreply.github.com> Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com> Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu> Co-authored-by: Keith Burzinski <kbx81x@gmail.com> Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com> Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
2020-04-10 05:07:18 +02:00
- platform: ac_dimmer
id: dimmer1
gate_pin:
allow_other_uses: true
number: GPIO5
zero_cross_pin:
allow_other_uses: true
number: GPIO26
- platform: esp32_dac
pin:
allow_other_uses: true
number: GPIO25
id: dac_output
- platform: mcp4725
id: mcp4725_dac_output
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: mcp4728
id: mcp4728_dac_output_a
channel: A
vref: vdd
power_down: normal
- platform: mcp4728
id: mcp4728_dac_output_b
channel: B
vref: internal
gain: X1
power_down: gnd_1k
- platform: mcp4728
id: mcp4728_dac_output_c
channel: C
vref: vdd
power_down: gnd_100k
- platform: mcp4728
id: mcp4728_dac_output_d
channel: D
vref: internal
gain: X2
power_down: gnd_500k
- platform: bp1658cj
id: bp1658cj_red
channel: 1
- platform: bp1658cj
id: bp1658cj_green
channel: 2
- platform: bp1658cj
id: bp1658cj_blue
channel: 0
- platform: bp1658cj
id: bp1658cj_coldwhite
channel: 3
- platform: bp1658cj
id: bp1658cj_warmwhite
channel: 4
- platform: bp5758d
id: bp5758d_red
channel: 2
current: 10
- platform: bp5758d
id: bp5758d_green
channel: 3
current: 10
- platform: bp5758d
id: bp5758d_blue
channel: 1
current: 10
- platform: bp5758d
id: bp5758d_coldwhite
channel: 5
current: 10
- platform: bp5758d
id: bp5758d_warmwhite
channel: 4
current: 10
- platform: x9c
id: test_x9c
cs_pin:
allow_other_uses: true
number: GPIO25
inc_pin:
allow_other_uses: true
number: GPIO26
ud_pin:
allow_other_uses: true
number: GPIO27
initial_value: 0.5
2018-08-26 11:26:14 +02:00
light:
- platform: binary
2022-09-06 05:48:01 +02:00
name: Desk Lamp
2018-08-26 11:26:14 +02:00
output: gpio_26
effects:
- strobe:
- strobe:
2022-09-06 05:48:01 +02:00
name: My Strobe
2018-08-26 11:26:14 +02:00
colors:
2022-09-06 05:48:01 +02:00
- state: true
2018-08-26 11:26:14 +02:00
duration: 250ms
2022-09-06 05:48:01 +02:00
- state: false
2018-08-26 11:26:14 +02:00
duration: 250ms
on_turn_on:
- switch.template.publish:
id: livingroom_lights
2022-09-06 05:48:01 +02:00
state: true
on_turn_off:
- switch.template.publish:
id: livingroom_lights
2022-09-06 05:48:01 +02:00
state: true
2018-08-26 11:26:14 +02:00
- platform: monochromatic
2022-09-06 05:48:01 +02:00
name: Kitchen Lights
2018-08-26 11:26:14 +02:00
id: kitchen
output: gpio_19
gamma_correct: 2.8
default_transition_length: 2s
effects:
- strobe:
- flicker:
- flicker:
2022-09-06 05:48:01 +02:00
name: My Flicker
2018-08-26 11:26:14 +02:00
alpha: 98%
intensity: 1.5%
- lambda:
name: My Custom Effect
update_interval: 1s
lambda: |-
static int state = 0;
state += 1;
if (state == 4)
state = 0;
- pulse:
transition_length: 10s
update_interval: 20s
min_brightness: 10%
max_brightness: 90%
- pulse:
name: pulse2
transition_length:
on_length: 10s
off_length: 5s
update_interval: 15s
min_brightness: 10%
max_brightness: 90%
2018-08-26 11:26:14 +02:00
- platform: rgb
2022-09-06 05:48:01 +02:00
name: Living Room Lights
id: ${roomname}_lights
2018-08-26 11:26:14 +02:00
red: pca_0
green: pca_1
blue: pca_2
- platform: rgbw
2022-09-06 05:48:01 +02:00
name: Living Room Lights 2
2018-08-26 11:26:14 +02:00
red: pca_3
green: pca_4
blue: pca_5
white: pca_6
color_interlock: true
2018-08-26 11:26:14 +02:00
- platform: rgbww
2022-09-06 05:48:01 +02:00
name: Living Room Lights 2
2018-08-26 11:26:14 +02:00
red: pca_3
green: pca_4
blue: pca_5
cold_white: pca_6
warm_white: pca_6
cold_white_color_temperature: 153 mireds
warm_white_color_temperature: 500 mireds
color_interlock: true
- platform: rgbct
2022-09-06 05:48:01 +02:00
name: Living Room Lights 2
red: pca_3
green: pca_4
blue: pca_5
color_temperature: pca_6
white_brightness: pca_6
cold_white_color_temperature: 153 mireds
warm_white_color_temperature: 500 mireds
color_interlock: true
2018-08-26 11:26:14 +02:00
- platform: cwww
2022-09-06 05:48:01 +02:00
name: Living Room Lights 2
2018-08-26 11:26:14 +02:00
cold_white: pca_6
warm_white: pca_6
cold_white_color_temperature: 153 mireds
warm_white_color_temperature: 500 mireds
constant_brightness: true
- platform: color_temperature
2022-09-06 05:48:01 +02:00
name: Living Room Lights 2
color_temperature: pca_6
brightness: pca_6
cold_white_color_temperature: 153 mireds
warm_white_color_temperature: 500 mireds
2018-08-26 11:26:14 +02:00
remote_transmitter:
- pin:
allow_other_uses: true
number: 32
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
carrier_duty_percent: 100%
2018-08-26 11:26:14 +02:00
climate:
- platform: tcl112
name: TCL112 Climate With Sensor
2022-09-06 05:48:01 +02:00
supports_heat: true
supports_cool: true
sensor: ${sensorname}_sensor
- platform: tcl112
name: TCL112 Climate
action_state_topic: action/state/topic
away_command_topic: away/command/topic
away_state_topic: away/state/topic
current_temperature_state_topic: current/temperature/state/topic
fan_mode_command_topic: fan_mode/mode/command/topic
fan_mode_state_topic: fan_mode/mode/state/topic
mode_command_topic: mode/command/topic
mode_state_topic: mode/state/topic
swing_mode_command_topic: swing_mode/command/topic
swing_mode_state_topic: swing_mode/state/topic
target_temperature_command_topic: target/temperature/command/topic
target_temperature_high_command_topic: target/temperature/high/command/topic
target_temperature_high_state_topic: target/temperature/high/state/topic
target_temperature_low_command_topic: target/temperature/low/command/topic
target_temperature_low_state_topic: target/temperature/low/state/topic
target_temperature_state_topic: target/temperature/state/topic
- platform: coolix
name: Coolix Climate With Sensor
2022-09-06 05:48:01 +02:00
supports_heat: true
supports_cool: true
sensor: ${sensorname}_sensor
- platform: coolix
name: Coolix Climate
- platform: fujitsu_general
name: Fujitsu General Climate
- platform: daikin
name: Daikin Climate
- platform: daikin_brc
name: Daikin BRC Climate
use_fahrenheit: true
- platform: delonghi
name: Delonghi Climate
- platform: yashima
name: Yashima Climate
- platform: mitsubishi
name: Mitsubishi
supports_dry: "true"
supports_fan_only: "true"
horizontal_default: "left"
vertical_default: "down"
- platform: whirlpool
name: Whirlpool Climate
- platform: climate_ir_lg
name: LG Climate
- platform: toshiba
name: Toshiba Climate
- platform: hitachi_ac344
name: Hitachi Climate
- platform: heatpumpir
protocol: mitsubishi_heavy_zm
horizontal_default: left
vertical_default: up
name: HeatpumpIR Climate
min_temperature: 18
max_temperature: 30
- platform: heatpumpir
protocol: greeyt
horizontal_default: left
vertical_default: up
name: HeatpumpIR Climate
min_temperature: 18
max_temperature: 30
- platform: midea_ir
name: Midea IR
use_fahrenheit: true
2021-09-08 23:10:02 +02:00
- platform: midea
on_control:
- logger.log: Control message received!
- lambda: |-
x.set_mode(CLIMATE_MODE_FAN_ONLY);
2021-11-13 15:42:15 +01:00
on_state:
- logger.log: State changed!
- lambda: |-
if (x.mode == CLIMATE_MODE_FAN_ONLY)
id(binary_sensor1).publish_state(true);
2021-09-08 23:10:02 +02:00
id: midea_unit
uart_id: uart_0
2021-09-08 23:10:02 +02:00
name: Midea Climate
transmitter_id:
period: 1s
num_attempts: 5
timeout: 2s
beeper: false
autoconf: true
visual:
2021-09-08 23:10:02 +02:00
min_temperature: 17 °C
max_temperature: 30 °C
temperature_step: 0.5 °C
supported_modes:
- FAN_ONLY
- HEAT_COOL
- COOL
- HEAT
- DRY
custom_fan_modes:
- SILENT
- TURBO
supported_presets:
- ECO
- BOOST
- SLEEP
custom_presets:
- FREEZE_PROTECTION
supported_swing_modes:
- VERTICAL
- HORIZONTAL
- BOTH
outdoor_temperature:
2022-09-06 05:48:01 +02:00
name: Temp
power_usage:
2022-09-06 05:48:01 +02:00
name: Power
humidity_setpoint:
2022-09-06 05:48:01 +02:00
name: Humidity
- platform: anova
name: Anova cooker
ble_client_id: ble_blah
unit_of_measurement: c
icon: mdi:stove
- platform: bedjet
name: My Bedjet
bedjet_id: my_bedjet_client
heat_mode: extended
- platform: whynter
name: Whynter
- platform: noblex
name: AC Living
id: noblex_ac
sensor: ${sensorname}_sensor
receiver_id: rcvr
- platform: gree
name: GREE
model: generic
- platform: zhlt01
name: ZH/LT-01 Climate
2021-09-08 23:10:02 +02:00
script:
- id: climate_custom
then:
- climate.control:
id: midea_unit
custom_preset: FREEZE_PROTECTION
custom_fan_mode: SILENT
- id: climate_preset
then:
- climate.control:
id: midea_unit
preset: SLEEP
2018-08-26 11:26:14 +02:00
switch:
2021-09-08 23:10:02 +02:00
- platform: template
name: MIDEA_AC_BEEPER_CONTROL
optimistic: true
turn_on_action:
midea_ac.beeper_on:
turn_off_action:
midea_ac.beeper_off:
- platform: template
name: MIDEA_RAW
turn_on_action:
- remote_transmitter.transmit_coolix:
first: 0xB21F98
- remote_transmitter.transmit_coolix:
first: 0xB21F98
second: 0xB21F98
- remote_transmitter.transmit_coolix:
first: !lambda "return 0xB21F98;"
second: !lambda "return 0xB21F98;"
- remote_transmitter.transmit_midea:
code: [0xA2, 0x08, 0xFF, 0xFF, 0xFF]
- remote_transmitter.transmit_midea:
code: !lambda "return {0xA2, 0x08, 0xFF, 0xFF, 0xFF};"
- platform: gpio
name: "MCP23S08 Pin #0"
pin:
mcp23xxx: mcp23s08_hub
# Use pin number 0
number: 0
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
- platform: gpio
name: "MCP23S17 Pin #0"
pin:
mcp23xxx: mcp23s17_hub
# Use pin number 0
number: 1
allow_other_uses: true
mode: OUTPUT
2022-09-06 05:48:01 +02:00
inverted: false
2018-08-26 11:26:14 +02:00
- platform: gpio
pin:
allow_other_uses: true
number: GPIO25
2022-09-06 05:48:01 +02:00
name: Living Room Dehumidifier
icon: "mdi:restart"
2022-09-06 05:48:01 +02:00
inverted: true
2018-08-26 11:26:14 +02:00
command_topic: custom_command_topic
command_retain: true
2019-01-06 11:43:14 +01:00
restore_mode: ALWAYS_OFF
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: JVC Off
2018-08-26 11:26:14 +02:00
id: living_room_lights_on
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
turn_on_action:
remote_transmitter.transmit_jvc:
data: 0x10EF
- platform: template
name: MagiQuest
turn_on_action:
remote_transmitter.transmit_magiquest:
wand_id: 0x01234567
- platform: template
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
name: NEC
2018-08-26 11:26:14 +02:00
id: living_room_lights_off
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
turn_on_action:
remote_transmitter.transmit_nec:
address: 0x4242
command: 0x8484
- platform: template
name: LG
turn_on_action:
remote_transmitter.transmit_lg:
data: 4294967295
nbits: 28
- platform: template
name: Samsung
turn_on_action:
remote_transmitter.transmit_samsung:
data: 0xABCDEF
- platform: template
name: Samsung36
turn_on_action:
remote_transmitter.transmit_samsung36:
address: 0x0400
command: 0x000E00FF
- platform: template
name: ToshibaAC
turn_on_action:
- remote_transmitter.transmit_toshiba_ac:
rc_code_1: 0xB24DBF4050AF
rc_code_2: 0xD5660001003C
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: Sony
turn_on_action:
remote_transmitter.transmit_sony:
data: 0xABCDEF
nbits: 12
- platform: template
name: Panasonic
turn_on_action:
remote_transmitter.transmit_panasonic:
address: 0x4004
command: 0x1000BCD
- platform: template
name: Pioneer
turn_on_action:
- remote_transmitter.transmit_pioneer:
rc_code_1: 0xA556
rc_code_2: 0xA506
repeat:
times: 2
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: RC Switch Raw
turn_on_action:
remote_transmitter.transmit_rc_switch_raw:
code: "00101001100111110101xxxx"
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
protocol: 1
- platform: template
name: RC Switch Type A
turn_on_action:
remote_transmitter.transmit_rc_switch_type_a:
group: "11001"
device: "01000"
2022-09-06 05:48:01 +02:00
state: true
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
protocol:
pulse_length: 175
sync: [1, 31]
zero: [1, 3]
one: [3, 1]
2022-09-06 05:48:01 +02:00
inverted: false
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: RC Switch Type B
turn_on_action:
remote_transmitter.transmit_rc_switch_type_b:
address: 4
channel: 2
2022-09-06 05:48:01 +02:00
state: true
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: RC Switch Type C
turn_on_action:
remote_transmitter.transmit_rc_switch_type_c:
family: "a"
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
group: 1
device: 2
2022-09-06 05:48:01 +02:00
state: true
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: RC Switch Type D
turn_on_action:
remote_transmitter.transmit_rc_switch_type_d:
group: "a"
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
device: 2
2022-09-06 05:48:01 +02:00
state: true
🏗 Merge C++ into python codebase (#504) ## Description: Move esphome-core codebase into esphome (and a bunch of other refactors). See https://github.com/esphome/feature-requests/issues/97 Yes this is a shit ton of work and no there's no way to automate it :( But it will be worth it 👍 Progress: - Core support (file copy etc): 80% - Base Abstractions (light, switch): ~50% - Integrations: ~10% - Working? Yes, (but only with ported components). Other refactors: - Moves all codegen related stuff into a single class: `esphome.codegen` (imported as `cg`) - Rework coroutine syntax - Move from `component/platform.py` to `domain/component.py` structure as with HA - Move all defaults out of C++ and into config validation. - Remove `make_...` helpers from Application class. Reason: Merge conflicts with every single new integration. - Pointer Variables are stored globally instead of locally in setup(). Reason: stack size limit. Future work: - Rework const.py - Move all `CONF_...` into a conf class (usage `conf.UPDATE_INTERVAL` vs `CONF_UPDATE_INTERVAL`). Reason: Less convoluted import block - Enable loading from `custom_components` folder. **Related issue (if applicable):** https://github.com/esphome/feature-requests/issues/97 **Pull request in [esphome-docs](https://github.com/esphome/esphome-docs) with documentation (if applicable):** esphome/esphome-docs#<esphome-docs PR number goes here> ## Checklist: - [ ] The code change is tested and works locally. - [ ] Tests have been added to verify that the new code works (under `tests/` folder). If user exposed functionality or configuration variables are added/changed: - [ ] Documentation added/updated in [esphomedocs](https://github.com/OttoWinter/esphomedocs).
2019-04-17 12:06:00 +02:00
- platform: template
name: RC5
turn_on_action:
remote_transmitter.transmit_rc5:
address: 0x00
command: 0x0B
- platform: template
name: RC5
turn_on_action:
remote_transmitter.transmit_raw:
code: [1000, -1000]
2022-08-31 06:43:33 +02:00
- platform: template
name: AEHA
id: eaha_hitachi_climate_power_on
turn_on_action:
remote_transmitter.transmit_aeha:
address: 0x8008
carrier_frequency: 36700Hz
2022-09-06 05:48:01 +02:00
data:
[
0x00,
0x02,
0xFD,
0xFF,
0x00,
0x33,
0xCC,
0x49,
0xB6,
0xC8,
0x37,
0x16,
0xE9,
0x00,
0xFF,
0x00,
0xFF,
0x00,
0xFF,
0x00,
0xFF,
0x00,
0xFF,
0xCA,
0x35,
0x8F,
0x70,
0x00,
0xFF,
0x00,
0xFF,
0x00,
0xFF,
0x00,
0xFF,
]
- platform: template
name: Haier
turn_on_action:
remote_transmitter.transmit_haier:
code:
[
0xA6,
0xDA,
0x00,
0x00,
0x40,
0x40,
0x00,
0x80,
0x00,
0x00,
0x00,
0x00,
0x05,
]
2018-08-26 11:26:14 +02:00
- platform: template
name: Living Room Lights
id: livingroom_lights
2022-09-06 05:48:01 +02:00
optimistic: true
assumed_state: true
2018-08-26 11:26:14 +02:00
turn_on_action:
2020-11-20 03:59:19 +01:00
- switch.turn_on: living_room_lights_on
- output.set_level:
id: gpio_19
level: 50%
- output.set_level:
id: gpio_19
level: !lambda "return 0.5;"
2020-11-20 03:59:19 +01:00
- output.set_level:
id: dac_output
level: 50%
- output.set_level:
id: dac_output
level: !lambda "return 0.5;"
- output.set_level:
id: mcp4725_dac_output
level: !lambda "return 0.5;"
- output.set_level:
id: mcp4728_dac_output_a
level: !lambda "return 0.5;"
2018-08-26 11:26:14 +02:00
turn_off_action:
2020-11-20 03:59:19 +01:00
- switch.turn_on: living_room_lights_off
on_turn_on:
- switch.template.publish:
id: livingroom_lights
2022-09-06 05:48:01 +02:00
state: true
2018-08-26 11:26:14 +02:00
- platform: restart
2022-09-06 05:48:01 +02:00
name: Living Room Restart
2021-10-06 09:44:48 +02:00
- platform: safe_mode
2022-09-06 05:48:01 +02:00
name: Living Room Restart (Safe Mode)
- platform: factory_reset
name: Living Room Restart (Factory Default Settings)
2018-08-26 11:26:14 +02:00
- platform: shutdown
2022-09-06 05:48:01 +02:00
name: Living Room Shutdown
2018-08-26 11:26:14 +02:00
- platform: output
2022-09-06 05:48:01 +02:00
name: Generic Output
2018-08-26 11:26:14 +02:00
output: pca_6
- platform: template
2022-09-06 05:48:01 +02:00
name: Template Switch
2018-08-26 11:26:14 +02:00
id: my_switch
lambda: |-
if (id(binary_sensor1).state) {
2018-08-26 11:26:14 +02:00
return true;
} else {
return {};
}
id(my_switch).publish_state(false);
id(my_switch).publish_state(true);
if (id(my_switch).state) {
2018-08-26 11:26:14 +02:00
// Switch is ON, do something here
id(my_switch).turn_off();
id(my_switch).turn_on();
2018-08-26 11:26:14 +02:00
} else {
// Switch is OFF, do something else here
}
optimistic: true
2022-09-06 05:48:01 +02:00
assumed_state: false
on_turn_off:
- switch.template.publish:
id: my_switch
state: !lambda "return false;"
2018-08-26 11:26:14 +02:00
- platform: uart
uart_id: uart_0
2022-09-06 05:48:01 +02:00
name: UART String Output
data: DataToSend
2018-08-26 11:26:14 +02:00
- platform: uart
uart_id: uart_0
2022-09-06 05:48:01 +02:00
name: UART Bytes Output
2018-08-26 11:26:14 +02:00
data: [0xDE, 0xAD, 0xBE, 0xEF]
- platform: uart
uart_id: uart_0
2022-09-06 05:48:01 +02:00
name: UART Recurring Output
data: [0xDE, 0xAD, 0xBE, 0xEF]
send_every: 1s
- platform: uart
uart_id: uart_0
name: "UART On/Off"
data:
turn_on: "TurnOn\r\n"
turn_off: "TurnOff\r\n"
- platform: template
2022-09-06 05:48:01 +02:00
assumed_state: true
name: Stepper Switch
turn_on_action:
2020-11-20 03:59:19 +01:00
- stepper.set_target:
id: my_stepper
target: !lambda |-
static int32_t i = 0;
i += 1000;
if (i > 5000) {
i = -5000;
}
return i;
- stepper.report_position:
id: my_stepper
position: 0
2018-08-26 11:26:14 +02:00
- platform: gpio
name: "SN74HC595 Pin #0"
pin:
sn74hc595: sn74hc595_hub_2
# Use pin number 0
number: 0
2022-09-06 05:48:01 +02:00
inverted: false
- platform: template
id: ble1_status
optimistic: true
- platform: template
id: outlet_switch
optimistic: true
device_class: outlet
- platform: ld2410
engineering_mode:
name: "control ld2410 engineering mode"
bluetooth:
name: "control ld2410 bluetooth"
- platform: micronova
stove:
name: Stove on/off
2018-08-26 11:26:14 +02:00
fan:
- platform: binary
output: gpio_26
2022-09-06 05:48:01 +02:00
name: Living Room Fan 1
oscillation_output: gpio_19
direction_output: gpio_26
2018-08-26 11:26:14 +02:00
- platform: speed
id: fan_speed
icon: mdi:weather-windy
2018-08-26 11:26:14 +02:00
output: pca_6
speed_count: 10
2022-09-06 05:48:01 +02:00
name: Living Room Fan 2
oscillation_output: gpio_19
direction_output: gpio_26
oscillation_state_topic: oscillation/state/topic
oscillation_command_topic: oscillation/command/topic
speed_level_state_topic: speed_level/state/topic
speed_level_command_topic: speed_level/command/topic
speed_state_topic: speed/state/topic
speed_command_topic: speed/command/topic
on_speed_set:
then:
2022-09-06 05:48:01 +02:00
- logger.log: Fan speed was changed!
- platform: speed
id: fan_speed_presets
icon: mdi:weather-windy
output: pca_6
speed_count: 10
name: Speed Fan w/ Presets
oscillation_output: gpio_19
direction_output: gpio_26
preset_modes:
- Preset 1
- Preset 2
on_preset_set:
then:
- logger.log: Preset mode was changed!
- platform: hbridge
id: fan_hbridge_presets
icon: mdi:weather-windy
speed_count: 4
name: H-bridge Fan w/ Presets
pin_a: pca_6
pin_b: pca_7
preset_modes:
- Preset 1
- Preset 2
on_preset_set:
then:
- logger.log: Preset mode was changed!
2022-08-31 03:53:18 +02:00
- platform: bedjet
name: My Bedjet fan
bedjet_id: my_bedjet_client
2022-02-20 21:13:37 +01:00
- platform: copy
source_id: fan_speed
2022-09-06 05:48:01 +02:00
name: Fan Speed Copy
2018-08-26 11:26:14 +02:00
2019-02-17 00:35:23 +01:00
interval:
- interval: 10s
then:
2020-11-20 03:59:19 +01:00
- display.page.show: !lambda |-
if (true) return id(page1); else return id(page2);
- display.page.show_next: display1
- display.page.show_previous: display1
- interval: 2s
then:
2022-09-06 05:48:01 +02:00
# yamllint disable rule:line-length
- lambda: |-
2020-11-20 03:59:19 +01:00
static uint16_t btn_left_state = id(btn_left)->get_value();
2020-11-20 03:59:19 +01:00
ESP_LOGD("adaptive touch", "___ Touch Pad '%s' (T%u): val: %u state: %u tres:%u", id(btn_left)->get_name().c_str(), id(btn_left)->get_touch_pad(), id(btn_left)->get_value(), btn_left_state, id(btn_left)->get_threshold());
2020-11-20 03:59:19 +01:00
btn_left_state = ((uint32_t) id(btn_left)->get_value() + 63 * (uint32_t)btn_left_state) >> 6;
2020-11-20 03:59:19 +01:00
id(btn_left)->set_threshold(btn_left_state * 0.9);
2022-09-06 05:48:01 +02:00
# yamllint enable rule:line-length
- if:
condition:
display.is_displaying_page:
id: display1
page_id: page1
then:
2022-09-06 05:48:01 +02:00
- logger.log: Seeing page 1
- interval: 60min
then:
- ble_client.connect: ble_blah
- ble_client.ble_write:
id: ble_blah
service_uuid: EBE0CCB0-7A0A-4B0C-8A1A-6FF2997DA3A6
characteristic_uuid: EBE0CCB7-7A0A-4B0C-8A1A-6FF2997DA3A6
value: !lambda |-
return {1, 0};
- ble_client.disconnect: ble_blah
2019-02-17 00:35:23 +01:00
color:
- id: kbx_red
red: 100%
green_int: 123
blue: 2%
- id: kbx_blue
red: 0%
green: 1%
blue: 100%
- id: kbx_green
hex: "3DEC55"
2018-08-26 11:26:14 +02:00
display:
2020-11-20 03:59:19 +01:00
- platform: lcd_gpio
id: my_lcd_gpio
2020-11-20 03:59:19 +01:00
dimensions: 18x4
data_pins:
2023-12-21 05:37:02 +01:00
- allow_other_uses: true
number: GPIO19
2023-12-21 05:37:02 +01:00
- allow_other_uses: true
number: GPIO21
2023-12-21 05:37:02 +01:00
- allow_other_uses: true
number: GPIO22
2023-12-21 05:37:02 +01:00
- allow_other_uses: true
number: GPIO23
enable_pin:
allow_other_uses: true
number: GPIO23
rs_pin:
allow_other_uses: true
number: GPIO25
2020-11-20 03:59:19 +01:00
lambda: |-
it.print("Hello World!");
- platform: lcd_pcf8574
dimensions: 18x4
address: 0x3F
user_characters:
- position: 0
data:
- 0b00000
- 0b01010
- 0b00000
- 0b00100
- 0b00100
- 0b10001
- 0b01110
- 0b00000
2020-11-20 03:59:19 +01:00
lambda: |-
it.print("Hello World!");
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2020-11-20 03:59:19 +01:00
- platform: max7219
cs_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
num_chips: 1
lambda: |-
it.print("01234567");
- platform: tm1637
clk_pin:
allow_other_uses: true
number: GPIO23
dio_pin:
allow_other_uses: true
number: GPIO25
2020-11-20 03:59:19 +01:00
intensity: 3
lambda: |-
it.print("1234");
2020-11-20 03:59:19 +01:00
- platform: tm1637
clk_pin:
mcp23xxx: mcp23017_hub
2020-11-20 03:59:19 +01:00
number: 1
allow_other_uses: true
2020-11-20 03:59:19 +01:00
dio_pin:
mcp23xxx: mcp23017_hub
2020-11-20 03:59:19 +01:00
number: 2
intensity: 3
inverted: true
length: 4
2020-11-20 03:59:19 +01:00
lambda: |-
it.print("1234");
2020-11-20 03:59:19 +01:00
- platform: pcd8544
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
contrast: 60
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: ssd1306_i2c
2022-09-06 05:48:01 +02:00
model: SSD1306_128X64
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
address: 0x3C
id: display1
contrast: 60%
2020-11-20 03:59:19 +01:00
pages:
- id: page1
lambda: |-
it.qr_code(0, 0, id(homepage_qr));
2020-11-20 03:59:19 +01:00
it.rectangle(0, 0, it.get_width(), it.get_height());
- id: page2
lambda: |-
// Nothing
on_page_change:
from: page1
to: page2
then:
lambda: |-
ESP_LOGD("display", "1 -> 2");
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2020-11-20 03:59:19 +01:00
- platform: ssd1306_spi
2022-09-06 05:48:01 +02:00
model: SSD1306 128x64
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-12-30 10:52:41 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: ssd1322_spi
2022-09-06 05:48:01 +02:00
model: SSD1322 256x64
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: ssd1325_spi
2022-09-06 05:48:01 +02:00
model: SSD1325 128x64
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: ssd1327_i2c
2022-09-06 05:48:01 +02:00
model: SSD1327 128X128
reset_pin:
allow_other_uses: true
number: GPIO23
address: 0x3D
id: display1327
brightness: 60%
pages:
- id: page13271
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- id: page13272
lambda: |-
// Nothing
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- platform: ssd1327_spi
2022-09-06 05:48:01 +02:00
model: SSD1327 128x128
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
2020-11-20 03:59:19 +01:00
- platform: ssd1331_spi
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: ssd1351_spi
2022-09-06 05:48:01 +02:00
model: SSD1351 128x128
cs_pin:
allow_other_uses: true
number: GPIO23
dc_pin:
allow_other_uses: true
number: GPIO23
reset_pin:
allow_other_uses: true
number: GPIO23
2020-11-20 03:59:19 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: st7789v
model: TTGO TDisplay 135x240
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
allow_other_uses: true
number: GPIO16
reset_pin:
allow_other_uses: true
number: GPIO23
2024-02-21 05:14:30 +01:00
backlight_pin: false
2020-11-20 03:59:19 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: st7920
width: 128
height: 64
cs_pin:
allow_other_uses: true
number: GPIO23
inverted: true
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: st7567_i2c
id: st7735_display_i2c
address: 0x3F
i2c_id: i2c_bus
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
- platform: st7567_spi
id: st7735_display_spi
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
allow_other_uses: true
number: GPIO16
reset_pin:
allow_other_uses: true
number: GPIO23
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
New display ST7735 (#1066) * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Updated with latest color api * pulled from origin * Updated for color.h changes * pulled test1 from dev * Added test
2020-11-23 18:37:43 +01:00
- platform: st7735
id: st7735_display
2022-09-06 05:48:01 +02:00
model: INITR_BLACKTAB
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
allow_other_uses: true
number: GPIO16
reset_pin:
allow_other_uses: true
number: GPIO23
New display ST7735 (#1066) * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Updated with latest color api * pulled from origin * Updated for color.h changes * pulled test1 from dev * Added test
2020-11-23 18:37:43 +01:00
rotation: 0
2021-02-14 06:21:43 +01:00
device_width: 128
device_height: 160
col_start: 0
row_start: 0
New display ST7735 (#1066) * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Initial Commit - ST7735 * Updated for CI checks * Updated for travis build * Travis fixes * Travis line too long * Travis fixes * Fixed up travis format issues * Travis Fixes * Update to new color API and added test * Check fixes * Fixed sid length in test * Cleaned up whitespaces * kbx81 recommended fixes * test fix * Fixes of fixes * Fixed test1.yaml * Fixed test1.yaml * Changed digital pin #s to gpio * Updated to match kbx's color names * Typo for ST7735_INITR_MINI_160X80 * Updated 8bit color space code Added to_rgb_332 to color.h fixed typo * Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale * Fixed MADCTL * Fixp MADCTL * Implemented usrbgr option updated color to support 332 bgr conversion typo fix * Updated to_bgr_332 * Fix up for clang * FIx up init code. type in buffer caused overrun * fixup protected names * typos * Matched use_bgr to its conf * color.h red fix in bgr_233to_rgb_565 * Fix ST7735_INITR_MINI_160X80 * Renamed bgr_233to_bgr_565 to match its function Color space leak in bgr_233to_bgr_565. cleaned up init code for displays. * Fix * clang fix * Started Color Conversion * Added various bit color functions add triadto * lint changes * Various fixes * Various formatting fixes. Wish my checks worked! * Updated color api to support different formats removed to_rgb_565 * lint clang fixes * Test1 fix * test1.yaml fix * fixed 565 in ILI9341Display * Added CodeOwners * Updated CODEOWNERS * changed to to332 and to565 * Waiting for color.h changes * Stage changes * Removed all changes except this driver * Moved color functions into driver * lint changes * Lint and removed unrelated display driver changes * Lint changes * Updated with latest color api * pulled from origin * Updated for color.h changes * pulled test1 from dev * Added test
2020-11-23 18:37:43 +01:00
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
Renaming and extending the ili9341 to the ili9xxx component (#4275) * - Removed cleaning the screen twice. \Should be handled by `DisplayBuffer::init_internal_();` - Made ili9341::initalize() protected and renamed \ it to ili9341::initalize(). - ili9341::initalize() should only init the display \ and set the width and heigth. * removed to much * clang format fixes * removing trailing underscors for protected virtual methods * removed the "override" on display() * clang fixes * restored old changes * Renamed the ili9341 platform to ili9xxx and added multiple drivers as well. including PR #3848 * fixed most of the clang reported issues * fixed reported issues * last fixes * Setting the right codeowners * missing changes * fixed naming Display() method. * clang again * clang fix * fixes reported by @jesserockz & @gpambrozio * a change to display.py removing an unneeded var * re-introduce **backlight** option. * update the ili9488 initialization * update the ili9488 initialization and fix typo * fixed typo * add missing constants * swap height and width back for the ili9488 * init fixes ili9488 * fixed lint issue testing the init code * oeps * init fixes ili9488 * fixed wrong define * fixed wrong define again * removed some spaces * revert to ili9341 * Remove parts that where used for the switchplate * lint fixes and removing unused function * fix error and introducing 16bit color option * fix error and introducing 16bit color option * fix clang issue * clang fix * clang issue again * is this what clang exprect * clang fix * clang fix * try again * let try again * and again * and the last clang fix * remove the need of wifi * update dimentions * update ili8488 init code. * update dimentions * allow to change height and width * dump color mode config * fix * fix * modify logging * referd back unrelated change * code formatting commit and moving functions around * add missing ; * update code * update code * use the correct write_array for sending uint16_t * fix panic loop * fix panic loop * - update the test file - fixed sending display data * clang fixes * clang fixes * clang fixes again * remove .gitignore items * remove .gitignore items * make sure Update() can can not be called while called * clang correction * adding a test yaml for the ili9341 * Update ili9341 example * Make test ili9xxx/tests only local * restore back old ili9341 driver code * Add a new config for the M5Core * fix clang request * reverd to restore of the old ili9341 there is no proper way to say it is depricated. * Remove the backlight/led pin from the config. You need to use a proper light platform component * Ili9488init changes (#88) Fixed ILI9488 init settings, and adjusted pixel handling code to push pixels in 18 bit format. This does not change the internal 16-bit representation. * fixed some leftover clang issues from the merge. * fixed the slang-tidy request. * remove `backlight_pin` warning. --------- Co-authored-by: JD Steffen <jdsteffen81@gmail.com>
2023-03-09 00:03:49 +01:00
- platform: ili9xxx
invert_colors: true
dimensions: 320x240
transform:
swap_xy: true
mirror_x: true
mirror_y: false
2022-09-06 05:48:01 +02:00
model: TFT 2.4
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
allow_other_uses: true
number: GPIO4
2023-09-27 01:25:14 +02:00
color_palette: GRAYSCALE
reset_pin:
allow_other_uses: true
number: GPIO22
lambda: |-
it.rectangle(0, 0, it.get_width(), it.get_height());
Renaming and extending the ili9341 to the ili9xxx component (#4275) * - Removed cleaning the screen twice. \Should be handled by `DisplayBuffer::init_internal_();` - Made ili9341::initalize() protected and renamed \ it to ili9341::initalize(). - ili9341::initalize() should only init the display \ and set the width and heigth. * removed to much * clang format fixes * removing trailing underscors for protected virtual methods * removed the "override" on display() * clang fixes * restored old changes * Renamed the ili9341 platform to ili9xxx and added multiple drivers as well. including PR #3848 * fixed most of the clang reported issues * fixed reported issues * last fixes * Setting the right codeowners * missing changes * fixed naming Display() method. * clang again * clang fix * fixes reported by @jesserockz & @gpambrozio * a change to display.py removing an unneeded var * re-introduce **backlight** option. * update the ili9488 initialization * update the ili9488 initialization and fix typo * fixed typo * add missing constants * swap height and width back for the ili9488 * init fixes ili9488 * fixed lint issue testing the init code * oeps * init fixes ili9488 * fixed wrong define * fixed wrong define again * removed some spaces * revert to ili9341 * Remove parts that where used for the switchplate * lint fixes and removing unused function * fix error and introducing 16bit color option * fix error and introducing 16bit color option * fix clang issue * clang fix * clang issue again * is this what clang exprect * clang fix * clang fix * try again * let try again * and again * and the last clang fix * remove the need of wifi * update dimentions * update ili8488 init code. * update dimentions * allow to change height and width * dump color mode config * fix * fix * modify logging * referd back unrelated change * code formatting commit and moving functions around * add missing ; * update code * update code * use the correct write_array for sending uint16_t * fix panic loop * fix panic loop * - update the test file - fixed sending display data * clang fixes * clang fixes * clang fixes again * remove .gitignore items * remove .gitignore items * make sure Update() can can not be called while called * clang correction * adding a test yaml for the ili9341 * Update ili9341 example * Make test ili9xxx/tests only local * restore back old ili9341 driver code * Add a new config for the M5Core * fix clang request * reverd to restore of the old ili9341 there is no proper way to say it is depricated. * Remove the backlight/led pin from the config. You need to use a proper light platform component * Ili9488init changes (#88) Fixed ILI9488 init settings, and adjusted pixel handling code to push pixels in 18 bit format. This does not change the internal 16-bit representation. * fixed some leftover clang issues from the merge. * fixed the slang-tidy request. * remove `backlight_pin` warning. --------- Co-authored-by: JD Steffen <jdsteffen81@gmail.com>
2023-03-09 00:03:49 +01:00
- platform: ili9xxx
dimensions:
width: 320
height: 240
offset_width: 20
offset_height: 10
2022-09-06 05:48:01 +02:00
model: TFT 2.4
cs_pin:
allow_other_uses: true
number: GPIO5
dc_pin:
allow_other_uses: true
number: GPIO4
reset_pin:
allow_other_uses: true
number: GPIO22
auto_clear_enabled: false
rotation: 90
lambda: |-
if (!id(glob_bool_processed)) {
it.fill(Color::WHITE);
id(glob_bool_processed) = true;
}
- platform: pvvx_mithermometer
ble_client_id: ble_foo
time_id: sntp_time
disconnect_delay: 3s
update_interval: 10min
validity_period: 20min
lambda: |-
it.print_bignum(188.8);
it.print_unit(pvvx_mithermometer::UNIT_DEG_E);
it.print_smallnum(88);
it.print_percent(true);
it.print_happy(true);
it.print_sad(true);
it.print_bracket(true);
it.print_battery(true);
- platform: tm1621
id: tm1621_display
cs_pin:
allow_other_uses: true
number: GPIO17
data_pin:
allow_other_uses: true
number: GPIO5
read_pin:
allow_other_uses: true
number: GPIO23
write_pin:
allow_other_uses: true
number: GPIO18
lambda: |-
it.printf(0, "%.1f", id(dht_temperature).state);
it.display_celsius(true);
it.printf(1, "%.1f", id(dht_humidity).state);
it.display_humidity(true);
tm1651:
id: tm1651_battery
clk_pin:
allow_other_uses: true
number: GPIO23
dio_pin:
allow_other_uses: true
number: GPIO23
2018-08-26 11:26:14 +02:00
remote_receiver:
id: rcvr
pin:
allow_other_uses: true
number: GPIO32
2018-08-26 11:26:14 +02:00
dump: all
on_coolix:
then:
delay: !lambda "return x.first + x.second;"
on_rc_switch:
then:
delay: !lambda "return uint32_t(x.code) + x.protocol;"
2018-08-26 11:26:14 +02:00
status_led:
pin:
allow_other_uses: true
number: GPIO2
ignore_strapping_warning: true
2018-08-26 11:26:14 +02:00
pn532_spi:
id: pn532_bs
cs_pin:
allow_other_uses: true
number: GPIO23
2018-08-26 11:26:14 +02:00
update_interval: 1s
on_tag:
- lambda: |-
ESP_LOGD("main", "Found tag %s", x.c_str());
- mqtt.publish:
topic: the/topic
payload: !lambda "return x;"
on_tag_removed:
- lambda: |-
ESP_LOGD("main", "Removed tag %s", x.c_str());
- mqtt.publish:
topic: the/topic
payload: !lambda "return x;"
2018-08-26 11:26:14 +02:00
pn532_i2c:
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
pn7150_i2c:
2024-01-16 09:05:13 +01:00
id: nfcc_pn7150_i2c
i2c_id: i2c_bus
irq_pin:
allow_other_uses: true
number: GPIO32
ven_pin:
allow_other_uses: true
number: GPIO16
2023-12-13 23:54:55 +01:00
pn7160_i2c:
id: nfcc_pn7160_i2c
i2c_id: i2c_bus
dwl_req_pin:
allow_other_uses: true
number: GPIO17
irq_pin:
allow_other_uses: true
number: GPIO35
ven_pin:
allow_other_uses: true
number: GPIO16
wkup_req_pin:
allow_other_uses: true
number: GPIO21
emulation_message: https://www.home-assistant.io/tag/pulse_ce
tag_ttl: 1000ms
pn7160_spi:
id: nfcc_pn7160_spi
cs_pin:
number: GPIO15
dwl_req_pin:
allow_other_uses: true
number: GPIO17
irq_pin:
allow_other_uses: true
number: GPIO35
ven_pin:
allow_other_uses: true
number: GPIO16
wkup_req_pin:
allow_other_uses: true
number: GPIO21
emulation_message: https://www.home-assistant.io/tag/pulse_ce
tag_ttl: 1000ms
2018-08-26 11:26:14 +02:00
rdm6300:
uart_id: uart_0
2018-08-26 11:26:14 +02:00
rc522_spi:
cs_pin:
allow_other_uses: true
number: GPIO23
update_interval: 1s
on_tag:
- lambda: |-
ESP_LOGD("main", "Found tag %s", x.c_str());
rc522_i2c:
- update_interval: 1s
on_tag:
- lambda: |-
ESP_LOGD("main", "Found tag %s", x.c_str());
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
- update_interval: 1s
on_tag:
- lambda: |-
ESP_LOGD("main", "Found tag %s", x.c_str());
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
mcp4728:
- id: mcp4728_dac
2022-09-06 05:48:01 +02:00
store_in_eeprom: false
address: 0x60
i2c_id: i2c_bus
gps:
uart_id: uart_0
2018-08-26 11:26:14 +02:00
time:
2020-11-20 03:59:19 +01:00
- platform: sntp
id: sntp_time
servers:
- 0.pool.ntp.org
- 1.pool.ntp.org
- 192.168.178.1
on_time:
cron: "/30 0-30,30/5 * ? JAN-DEC MON,SAT-SUN,TUE-FRI"
2020-11-20 03:59:19 +01:00
then:
- lambda: 'ESP_LOGD("main", "time");'
- platform: gps
on_time_sync:
then:
ds1307.write_time:
id: ds1307_time
- platform: ds1307
id: ds1307_time
update_interval: never
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2023-10-03 11:58:11 +02:00
on_time:
- seconds: 0
then: ds1307.read_time
- at: "16:00:00"
then:
- if:
condition:
or:
- binary_sensor.is_on: close_sensor
- binary_sensor.is_on: open_sensor
then:
logger.log: "close_sensor or open_sensor is on"
- if:
condition:
and:
- binary_sensor.is_on: close_sensor
- binary_sensor.is_on: open_sensor
then:
logger.log: "close_sensor and open_sensor are both on"
- if:
condition:
xor:
- binary_sensor.is_on: close_sensor
- binary_sensor.is_on: open_sensor
then:
logger.log: "close_sensor or open_sensor is exclusively on"
- if:
condition:
not:
- binary_sensor.is_on: close_sensor
then:
logger.log: "close_sensor is not on"
2018-08-26 11:26:14 +02:00
cover:
- platform: template
2022-09-06 05:48:01 +02:00
name: Template Cover
id: template_cover
lambda: |-
if (id(binary_sensor1).state) {
return COVER_OPEN;
2018-08-26 11:26:14 +02:00
} else {
return {};
}
optimistic: true
open_action:
- cover.template.publish:
id: template_cover
state: CLOSED
2022-09-06 05:48:01 +02:00
assumed_state: false
has_position: true
position_state_topic: position/state/topic
position_command_topic: position/command/topic
tilt_lambda: !lambda "return 0.5;"
tilt_state_topic: tilt/state/topic
tilt_command_topic: tilt/command/topic
on_open:
then:
- lambda: 'ESP_LOGD("cover", "open");'
on_closed:
then:
- lambda: 'ESP_LOGD("cover", "closed");'
- platform: am43
2022-09-06 05:48:01 +02:00
name: Test AM43
id: am43_test
ble_client_id: ble_foo
icon: mdi:blinds
- platform: feedback
2022-09-06 05:48:01 +02:00
name: Feedback Cover
id: gate
device_class: gate
infer_endstop_from_movement: false
has_built_in_endstop: false
max_duration: 30s
direction_change_wait_time: 300ms
acceleration_wait_time: 150ms
obstacle_rollback: 10%
open_duration: 22.1s
open_endstop: open_endstop_sensor
open_sensor: open_sensor
open_obstacle_sensor: open_obstacle_sensor
close_duration: 22.4s
close_endstop: close_endstop_sensor
close_sensor: close_sensor
close_obstacle_sensor: close_obstacle_sensor
open_action:
- logger.log: Open Action
close_action:
- logger.log: Close Action
stop_action:
- logger.log: Stop Action
2018-08-26 11:26:14 +02:00
debug:
tca9548a:
- address: 0x70
id: multiplex0
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
channels:
- bus_id: multiplex0_chan0
channel: 0
i2c_id: i2c_bus
- address: 0x71
id: multiplex1
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: multiplex0_chan0
2018-08-26 11:26:14 +02:00
pcf8574:
2022-09-06 05:48:01 +02:00
- id: pcf8574_hub
2018-08-26 11:26:14 +02:00
address: 0x21
2022-09-06 05:48:01 +02:00
pcf8575: false
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
2022-12-22 06:39:25 +01:00
pca9554:
- id: pca9554_hub
pin_count: 8
2022-12-22 06:39:25 +01:00
address: 0x3F
i2c_id: i2c_bus
2023-05-01 06:00:21 +02:00
pca6416a:
- id: pca6416a_hub
address: 0x21
i2c_id: i2c_bus
mcp23017:
2022-09-06 05:48:01 +02:00
- id: mcp23017_hub
open_drain_interrupt: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
mcp23008:
2022-09-06 05:48:01 +02:00
- id: mcp23008_hub
address: 0x22
2022-09-06 05:48:01 +02:00
open_drain_interrupt: true
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
mcp23016:
2022-09-06 05:48:01 +02:00
- id: mcp23016_hub
address: 0x23
ESP-IDF support and generic target platforms (#2303) * Socket refactor and SSL * esp-idf temp * Fixes * Echo component and noise * Add noise API transport support * Updates * ESP-IDF * Complete * Fixes * Fixes * Versions update * New i2c APIs * Complete i2c refactor * SPI migration * Revert ESP Preferences migration, too complex for now * OTA support * Remove echo again * Remove ssl again * GPIOFlags updates * Rename esphal and ICACHE_RAM_ATTR * Make ESP32 arduino compilable again * Fix GPIO flags * Complete pin registry refactor and fixes * Fixes to make test1 compile * Remove sdkconfig file * Ignore sdkconfig file * Fixes in reviewing * Make test2 compile * Make test4 compile * Make test5 compile * Run clang-format * Fix lint errors * Use esp-idf APIs instead of btStart * Another round of fixes * Start implementing ESP8266 * Make test3 compile * Guard esp8266 code * Lint * Reformat * Fixes * Fixes v2 * more fixes * ESP-IDF tidy target * Convert ARDUINO_ARCH_ESPxx * Update WiFiSignalSensor * Update time ifdefs * OTA needs millis from hal * RestartSwitch needs delay from hal * ESP-IDF Uart * Fix OTA blank password * Allow setting sdkconfig * Fix idf partitions and allow setting sdkconfig from yaml * Re-add read/write compat APIs and fix esp8266 uart * Fix esp8266 store log strings in flash * Fix ESP32 arduino preferences not initialized * Update ifdefs * Change how sdkconfig change is detected * Add checks to ci-custom and fix them * Run clang-format * Add esp-idf clang-tidy target and fix errors * Fixes from clang-tidy idf round 2 * Fixes from compiling tests with esp-idf * Run clang-format * Switch test5.yaml to esp-idf * Implement ESP8266 Preferences * Lint * Re-do PIO package version selection a bit * Fix arduinoespressif32 package version * Fix unit tests * Lint * Lint fixes * Fix readv/writev not defined * Fix graphing component * Re-add all old options from core/config.py Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
i2c_id: i2c_bus
stepper:
2020-11-20 03:59:19 +01:00
- platform: a4988
id: my_stepper
step_pin:
allow_other_uses: true
number: GPIO23
dir_pin:
allow_other_uses: true
number: GPIO25
sleep_pin:
allow_other_uses: true
number: GPIO25
2020-11-20 03:59:19 +01:00
max_speed: 250 steps/s
acceleration: 100 steps/s^2
deceleration: 200 steps/s^2
globals:
2020-11-20 03:59:19 +01:00
- id: glob_int
type: int
2022-09-06 05:48:01 +02:00
restore_value: true
initial_value: "0"
2020-11-20 03:59:19 +01:00
- id: glob_float
type: float
2022-09-06 05:48:01 +02:00
restore_value: true
initial_value: "0.0f"
2020-11-20 03:59:19 +01:00
- id: glob_bool
type: bool
2022-09-06 05:48:01 +02:00
restore_value: false
initial_value: "true"
2020-11-20 03:59:19 +01:00
- id: glob_string
type: std::string
2022-09-06 05:48:01 +02:00
restore_value: false
2020-11-20 03:59:19 +01:00
# initial_value: ""
- id: glob_bool_processed
type: bool
2022-09-06 05:48:01 +02:00
restore_value: false
initial_value: "false"
text_sensor:
- platform: ble_client
ble_client_id: ble_foo
2022-09-06 05:48:01 +02:00
name: Sensor Location
service_uuid: "180d"
characteristic_uuid: "2a38"
descriptor_uuid: "2902"
notify: true
update_interval: never
on_notify:
then:
- lambda: |-
2022-02-19 14:42:54 +01:00
ESP_LOGD("green_btn", "Location changed: %s", x.c_str());
2020-11-20 03:59:19 +01:00
- platform: mqtt_subscribe
2022-09-06 05:48:01 +02:00
name: MQTT Subscribe Text
topic: "the/topic"
2020-11-20 03:59:19 +01:00
qos: 2
on_value:
- text_sensor.template.publish:
id: ${textname}_text
2020-11-20 03:59:19 +01:00
state: Hello World
- text_sensor.template.publish:
id: ${textname}_text
2020-11-20 03:59:19 +01:00
state: |-
return "Hello World2";
- globals.set:
id: glob_int
value: "0"
- canbus.send:
canbus_id: mcp2515_can
can_id: 23
data: [0x10, 0x20, 0x30]
- canbus.send:
canbus_id: mcp2515_can
can_id: 23
data: !lambda return {0x10, 0x20, 0x30};
- canbus.send:
canbus_id: esp32_internal_can
can_id: 23
data: [0x10, 0x20, 0x30]
- canbus.send:
canbus_id: mcp2515_can
can_id: 24
remote_transmission_request: true
data: []
- canbus.send:
canbus_id: esp32_internal_can
can_id: 24
remote_transmission_request: true
data: []
2020-11-20 03:59:19 +01:00
- platform: template
name: Template Text Sensor
id: ${textname}_text
- platform: template
name: Template Text Sensor Timestamp
id: ${textname}_text_timestamp
device_class: timestamp
2020-11-20 03:59:19 +01:00
- platform: wifi_info
scan_results:
2022-09-06 05:48:01 +02:00
name: Scan Results
2020-11-20 03:59:19 +01:00
ip_address:
2022-09-06 05:48:01 +02:00
name: IP Address
2020-11-20 03:59:19 +01:00
ssid:
2022-09-06 05:48:01 +02:00
name: SSID
2020-11-20 03:59:19 +01:00
bssid:
2022-09-06 05:48:01 +02:00
name: BSSID
2020-11-20 03:59:19 +01:00
mac_address:
2022-09-06 05:48:01 +02:00
name: Mac Address
dns_address:
name: DNS ADdress
2020-11-20 03:59:19 +01:00
- platform: version
2022-09-06 05:48:01 +02:00
name: ESPHome Version No Timestamp
hide_timestamp: true
- platform: teleinfo
2022-09-06 05:48:01 +02:00
tag_name: OPTARIF
name: optarif
teleinfo_id: myteleinfo
- platform: ld2410
version:
name: "presenece sensor version"
mac_address:
name: "presenece sensor mac address"
sn74hc595:
2022-09-06 05:48:01 +02:00
- id: sn74hc595_hub
data_pin:
allow_other_uses: true
number: GPIO21
clock_pin:
allow_other_uses: true
number: GPIO23
latch_pin:
allow_other_uses: true
number: GPIO22
oe_pin:
allow_other_uses: true
number: GPIO32
sr_count: 2
- id: sn74hc595_hub_2
latch_pin:
allow_other_uses: true
number: GPIO22
oe_pin:
allow_other_uses: true
number: GPIO32
sr_count: 2
spi_id: spi_bus
type: spi
rtttl:
output: gpio_19
canbus:
- platform: mcp2515
id: mcp2515_can
cs_pin:
pca9554: pca9554_hub
number: 7
mode:
output: true
inverted: true
can_id: 4
bit_rate: 50kbps
on_frame:
- can_id: 500
then:
- lambda: |-
std::string b(x.begin(), x.end());
2022-02-19 14:42:54 +01:00
ESP_LOGD("canid 500", "%s", b.c_str());
- can_id: 23
then:
- if:
condition:
lambda: "return x[0] == 0x11;"
then:
light.toggle: ${roomname}_lights
- can_id: 0b00000000000000000000001000000
can_id_mask: 0b11111000000000011111111000000
use_extended_id: true
then:
- lambda: |-
auto pdo_id = can_id >> 14;
switch (pdo_id)
{
case 117:
ESP_LOGD("canbus", "exhaust_fan_duty");
break;
case 118:
ESP_LOGD("canbus", "supply_fan_duty");
break;
case 119:
ESP_LOGD("canbus", "supply_fan_flow");
break;
// to be continued...
}
- platform: esp32_can
id: esp32_internal_can
rx_pin:
allow_other_uses: true
number: GPIO04
tx_pin:
allow_other_uses: true
number: GPIO05
can_id: 4
bit_rate: 50kbps
on_frame:
- can_id: 500
then:
- lambda: |-
std::string b(x.begin(), x.end());
2022-02-19 14:42:54 +01:00
ESP_LOGD("canid 500", "%s", b.c_str() );
- can_id: 23
then:
- if:
condition:
lambda: "return x[0] == 0x11;"
then:
light.toggle: ${roomname}_lights
- can_id: 0b00000000000000000000001000000
can_id_mask: 0b11111000000000011111111000000
use_extended_id: true
then:
- lambda: |-
auto pdo_id = can_id >> 14;
switch (pdo_id)
{
case 117:
ESP_LOGD("canbus", "exhaust_fan_duty");
break;
case 118:
ESP_LOGD("canbus", "supply_fan_duty");
break;
case 119:
ESP_LOGD("canbus", "supply_fan_flow");
break;
// to be continued...
}
teleinfo:
id: myteleinfo
uart_id: uart_0
update_interval: 60s
historical_mode: true
number:
- platform: template
id: test_number
state_topic: livingroom/custom_state_topic
command_topic: livingroom/custom_command_topic
min_value: 0
step: 1
max_value: 10
optimistic: true
- platform: ld2410
light_threshold:
name: light threshold
timeout:
name: timeout
max_move_distance_gate:
name: max move distance gate
max_still_distance_gate:
name: max still distance gate
g0:
move_threshold:
name: g0 move threshold
still_threshold:
name: g0 still threshold
g1:
move_threshold:
name: g1 move threshold
still_threshold:
name: g1 still threshold
g2:
move_threshold:
name: g2 move threshold
still_threshold:
name: g2 still threshold
g3:
move_threshold:
name: g3 move threshold
still_threshold:
name: g3 still threshold
g4:
move_threshold:
name: g4 move threshold
still_threshold:
name: g4 still threshold
g5:
move_threshold:
name: g5 move threshold
still_threshold:
name: g5 still threshold
g6:
move_threshold:
name: g6 move threshold
still_threshold:
name: g6 still threshold
g7:
move_threshold:
name: g7 move threshold
still_threshold:
name: g7 still threshold
g8:
move_threshold:
name: g8 move threshold
still_threshold:
name: g8 still threshold
- platform: micronova
thermostat_temperature:
name: Micronova Thermostaat
step: 1
power_level:
name: Micronova Power level
select:
- platform: template
id: test_select
state_topic: livingroom/custom_state_topic
command_topic: livingroom/custom_command_topic
options:
- one
- two
optimistic: true
2022-02-20 21:13:37 +01:00
- platform: copy
source_id: test_select
name: Test Select Copy
- platform: ld2410
distance_resolution:
name: distance resolution
baud_rate:
name: baud rate
light_function:
name: light function
out_pin_level:
name: out ping level
qr_code:
- id: homepage_qr
value: https://esphome.io/index.html
lock:
- platform: template
id: test_lock1
2022-09-06 05:48:01 +02:00
name: Template Switch
lambda: |-
if (id(binary_sensor1).state) {
return LOCK_STATE_LOCKED;
}else{
return LOCK_STATE_UNLOCKED;
}
optimistic: true
2022-09-06 05:48:01 +02:00
assumed_state: false
on_unlock:
- lock.template.publish:
id: test_lock1
state: !lambda "return LOCK_STATE_UNLOCKED;"
on_lock:
- lock.template.publish:
id: test_lock1
state: !lambda "return LOCK_STATE_LOCKED;"
- platform: output
2022-09-06 05:48:01 +02:00
name: Generic Output Lock
id: test_lock2
output: pca_6
2022-02-20 21:13:37 +01:00
- platform: copy
source_id: test_lock2
name: Generic Output Lock Copy
button:
- platform: template
2022-09-06 05:48:01 +02:00
name: Start calibration
on_press:
- scd4x.perform_forced_calibration:
value: 419
id: scd40
- scd4x.factory_reset:
id: scd40
- platform: template
name: Midea Display Toggle
on_press:
midea_ac.display_toggle:
- platform: template
name: Midea Swing Step
on_press:
midea_ac.swing_step:
- platform: template
name: Midea Power On
on_press:
midea_ac.power_on:
- platform: template
name: Midea Power Off
on_press:
midea_ac.power_off:
- platform: template
name: Midea Power Inverse
on_press:
midea_ac.power_toggle:
- platform: template
name: Update Mmwave Sensor Settings
on_press:
- dfrobot_sen0395.settings:
id: mmwave
factory_reset: true
detection_segments:
- [0cm, 5m]
- 600cm
- !lambda |-
return 7;
output_latency:
delay_after_detect: 0s
delay_after_disappear: 0s
sensitivity: 6
- platform: template
name: Reset Mmwave Sensor
on_press:
- dfrobot_sen0395.reset:
2023-10-02 22:25:13 +02:00
- platform: template
name: Poller component suspend test
on_press:
- component.suspend: myteleinfo
- delay: 20s
- component.update: myteleinfo
- delay: 20s
- component.resume: myteleinfo
- delay: 20s
- component.resume:
id: myteleinfo
update_interval: 2s
- delay: 20s
- component.resume:
id: myteleinfo
update_interval: !lambda return 2500;
- platform: ld2410
factory_reset:
name: "factory reset"
restart:
name: "restart"
query_params:
name: query params
- platform: uart
uart_id: uart_0
name: UART button
data: "Pressed\r\n"
- platform: micronova
custom_button:
name: Custom Micronova Button
memory_location: 0xA0
memory_address: 0x7D
memory_data: 0x0F
ld2410:
id: my_ld2410
uart_id: ld2410_uart
ld2420:
id: my_ld2420
uart_id: ld2420_uart
lcd_menu:
id: test_lcd_menu
display_id: my_lcd_gpio
mark_back: 0x5e
mark_selected: 0x3e
mark_editing: 0x2a
mark_submenu: 0x7e
active: false
mode: rotary
on_enter:
then:
lambda: 'ESP_LOGI("lcd_menu", "root enter");'
on_leave:
then:
lambda: 'ESP_LOGI("lcd_menu", "root leave");'
items:
- type: back
2023-03-09 02:54:51 +01:00
text: Back
- type: label
- type: menu
2023-03-09 02:54:51 +01:00
text: Submenu 1
items:
- type: back
2023-03-09 02:54:51 +01:00
text: Back
- type: menu
2023-03-09 02:54:51 +01:00
text: Submenu 21
items:
- type: back
2023-03-09 02:54:51 +01:00
text: Back
- type: command
2023-03-09 02:54:51 +01:00
text: Show Main
on_value:
then:
- display_menu.show_main: test_lcd_menu
- type: select
2023-03-09 02:54:51 +01:00
text: Enum Item
immediate_edit: true
select: test_select
on_enter:
then:
lambda: 'ESP_LOGI("lcd_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_leave:
then:
lambda: 'ESP_LOGI("lcd_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_value:
then:
lambda: 'ESP_LOGI("lcd_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
- type: number
2023-03-09 02:54:51 +01:00
text: Number
number: test_number
on_enter:
then:
lambda: 'ESP_LOGI("lcd_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_leave:
then:
lambda: 'ESP_LOGI("lcd_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_value:
then:
lambda: 'ESP_LOGI("lcd_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
- type: command
2023-03-09 02:54:51 +01:00
text: Hide
on_value:
then:
- display_menu.hide: test_lcd_menu
- type: switch
2023-03-09 02:54:51 +01:00
text: Switch
switch: my_switch
2023-03-09 02:54:51 +01:00
on_text: Bright
off_text: Dark
immediate_edit: false
on_value:
then:
lambda: 'ESP_LOGI("lcd_menu", "switch value: %s", it->get_value_text().c_str());'
- type: custom
text: !lambda 'return "Custom";'
value_lambda: 'return "Val";'
on_next:
then:
lambda: 'ESP_LOGI("lcd_menu", "custom next: %s", it->get_text().c_str());'
on_prev:
then:
lambda: 'ESP_LOGI("lcd_menu", "custom prev: %s", it->get_text().c_str());'
font:
- file: "gfonts://Roboto"
id: roboto
size: 20
graphical_display_menu:
id: test_graphical_display_menu
display: st7735_display
font: roboto
active: false
mode: rotary
on_enter:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "root enter");'
on_leave:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "root leave");'
items:
- type: back
2023-12-21 05:37:02 +01:00
text: "Back"
- type: label
- type: menu
2023-12-21 05:37:02 +01:00
text: "Submenu 1"
items:
- type: back
2023-12-21 05:37:02 +01:00
text: "Back"
- type: menu
2023-12-21 05:37:02 +01:00
text: "Submenu 21"
items:
- type: back
2023-12-21 05:37:02 +01:00
text: "Back"
- type: command
2023-12-21 05:37:02 +01:00
text: "Show Main"
on_value:
then:
- display_menu.show_main: test_graphical_display_menu
- type: select
2023-12-21 05:37:02 +01:00
text: "Enum Item"
immediate_edit: true
select: test_select
on_enter:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "select enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_leave:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "select leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_value:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "select value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
- type: number
2023-12-21 05:37:02 +01:00
text: "Number"
number: test_number
on_enter:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "number enter: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_leave:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "number leave: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
on_value:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "number value: %s, %s", it->get_text().c_str(), it->get_value_text().c_str());'
- type: command
2023-12-21 05:37:02 +01:00
text: "Hide"
on_value:
then:
- display_menu.hide: test_graphical_display_menu
- type: switch
2023-12-21 05:37:02 +01:00
text: "Switch"
switch: my_switch
2023-12-21 05:37:02 +01:00
on_text: "Bright"
off_text: "Dark"
immediate_edit: false
on_value:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "switch value: %s", it->get_value_text().c_str());'
- type: custom
text: !lambda 'return "Custom";'
value_lambda: 'return "Val";'
on_next:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "custom next: %s", it->get_text().c_str());'
on_prev:
then:
lambda: 'ESP_LOGI("graphical_display_menu", "custom prev: %s", it->get_text().c_str());'
alarm_control_panel:
- platform: template
id: alarmcontrolpanel1
name: Alarm Panel
codes:
- "1234"
requires_code_to_arm: true
arming_home_time: 1s
arming_away_time: 15s
pending_time: 15s
trigger_time: 30s
binary_sensors:
- binary_sensor1
on_state:
then:
- lambda: !lambda |-
ESP_LOGD("TEST", "State change %s", alarm_control_panel_state_to_string(id(alarmcontrolpanel1)->get_state()));