Carlos Garcia Saura
da45923d05
Turn verbose a debug statement in bme280 ( #2906 )
2021-12-13 09:32:37 +13:00
Carlos Garcia Saura
31a61b598b
Reduce timing noise in duty_cycle ( #2881 )
2021-12-13 09:30:47 +13:00
tony
9c0506592b
Add light.on_state trigger ( #2868 )
2021-12-13 09:19:57 +13:00
Oxan van Leeuwen
beeb0c7c5a
Introduce hex parsing & formatting helper functions ( #2882 )
2021-12-13 09:15:23 +13:00
Martin
b2f05faee0
Move i2c scan to setup ( #2869 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-13 09:12:50 +13:00
Keith Burzinski
d504daef91
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 21:07:07 +13:00
Keith Burzinski
cf5193d3e5
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 20:03:22 +13:00
Guillermo Ruffino
708b928c73
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:55:48 +13:00
Jesse Hills
649366ff44
Fix published state for modbus number ( #2894 )
2021-12-10 09:55:47 +13:00
Guillermo Ruffino
c490388e80
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:44:43 +13:00
Jesse Hills
24ec5a6e9d
Fix published state for modbus number ( #2894 )
2021-12-10 09:32:34 +13:00
Carlos Garcia Saura
e763469af8
Feed watchdog while setting up OTA ( #2876 )
2021-12-08 12:58:14 +13:00
Oxan van Leeuwen
6fe4ff7f85
Drop len parameter from parse_number() ( #2883 )
2021-12-08 08:46:25 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Carlos Garcia Saura
e5cc19de43
Feed watchdog while setting up OTA ( #2876 )
2021-12-06 23:26:06 +01:00
Jesse Hills
24874f4c3c
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-07 07:47:48 +13:00
Massimiliano Ravelli
a66e94a0b0
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
56870ed4a8
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-07 07:47:48 +13:00
Martin
3ac720df47
SPS30 : fix i2c read size ( #2866 )
2021-12-07 07:47:48 +13:00
Carlos Garcia Saura
1bc757ad06
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-07 07:47:48 +13:00
Martin
f72abc6f3d
tlc59208f : fix compilation error ( #2867 )
2021-12-07 07:47:48 +13:00
Jesse Hills
49932747b3
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-06 20:57:56 +13:00
Massimiliano Ravelli
71fe2f7ed3
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-06 20:01:50 +13:00
Oxan van Leeuwen
ffc112c9d0
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-06 20:01:14 +13:00
Oxan van Leeuwen
d3e48e296f
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-06 19:59:50 +13:00
Martin
14f6ae75ea
SPS30 : fix i2c read size ( #2866 )
2021-12-06 19:58:26 +13:00
Carlos Garcia Saura
c84efe64d3
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-06 19:56:53 +13:00
Martin
10e89a7dbb
tlc59208f : fix compilation error ( #2867 )
2021-12-06 19:54:46 +13:00
Oxan van Leeuwen
9dcd3d18a0
Update ota_component.cpp ( #2852 )
2021-12-03 07:54:34 +13:00
Oxan van Leeuwen
40c017fd54
Update ota_component.cpp ( #2852 )
2021-12-03 07:52:56 +13:00
Jesse Hills
36b355eb82
Merge branch 'dev' into bump-2021.12.0b1
2021-12-02 19:38:44 +13:00
Martin
9ca4e8f32a
modbus_controller: bugfix: enable overriding calculated register size ( #2845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-02 15:45:11 +13:00
Alexandre-Jacques St-Jacques
1b88b7a166
Fix wifi not working with manual_ip using esp-idf ( #2849 )
2021-12-02 15:33:48 +13:00
Paul Nicholls
caf352ff06
Tuya Cover improvements ( #2637 )
2021-12-02 15:26:56 +13:00
Oxan van Leeuwen
54106179a1
Set ESP32 watchdog to loop task ( #2846 )
2021-12-02 09:05:42 +13:00
Oxan van Leeuwen
607601b3a4
Enable a bunch of clang-tidy checks ( #2149 )
2021-12-02 09:03:51 +13:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Mark Dietzer
24a5325db3
Declare arch_get_cpu_cycle_count for esp8266 as IRAM ( #2843 )
2021-12-01 10:01:15 +01:00
Yuval Brik
1ec3140759
ESP32 Deep Sleep: correct level value ( #2812 )
...
Upon registering for ESP32 deep sleep, DeepSleepComponent::begin_sleep
calculates the level value to wake up on.
As part of PR #2303 , the level was changed to be based on `inverted`
instead of `!inverted`:
Before:
1e8e471dec/esphome/components/deep_sleep/deep_sleep_component.cpp (L76)2b04152482/esphome/components/deep_sleep/deep_sleep_component.cpp (L80)#2644 .
[0]
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#_CPPv428esp_sleep_enable_ext0_wakeup10gpio_num_ti
2021-12-01 09:38:58 +01:00
Oxan van Leeuwen
cbc1334b8d
Fix compile warning in Tuya automations ( #2837 )
2021-12-01 17:11:21 +13:00
mechanarchy
08cbb97ec9
Allow Git credentials to be loaded from secrets ( #2825 )
2021-12-01 17:10:25 +13:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b32b918936
Button device class ( #2835 )
2021-11-30 16:18:21 +01:00
Carlos Garcia Saura
cd018ad3a5
Burst read for BME280, to reduce spurious spikes ( #2809 )
2021-11-30 16:12:52 +01:00
Adrián Panella
24dfecb6f0
cse7766: add energy sensor ( #2822 )
2021-11-30 16:08:00 +01:00
Keith Burzinski
556d071e7f
Fix 8266 SPI Clock Polarity Setting ( #2836 )
2021-11-30 19:30:45 +13:00
dentra
939fb313df
Tuya text_sensor and raw data usage ( #1812 )
2021-11-30 08:08:52 +13:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
definitio
f50e40e0b8
Fix custom mode_state_topic ( #2827 )
2021-11-29 18:09:09 +01:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Conclusio
a5fb036011
Add delay to improve stability ( #2793 )
2021-11-29 10:18:48 +13:00
Dave T
e55506f9db
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 10:18:48 +13:00
Carlos Garcia Saura
50ec1d0445
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
3d5e1d8d91
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
db2128a344
Fix parsing numbers in Anova ( #2816 )
2021-11-29 10:18:48 +13:00
Conclusio
7afcb0fb04
Add delay to improve stability ( #2793 )
2021-11-29 08:13:42 +13:00
Dave T
10f830c3ef
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 08:12:40 +13:00
Carlos Garcia Saura
7a5c3aa7ed
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 08:06:53 +13:00
Oxan van Leeuwen
2b50406856
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 08:02:10 +13:00
Oxan van Leeuwen
10a2a7e0fc
Fix parsing numbers in Anova ( #2816 )
2021-11-29 08:00:29 +13:00
Maurice Makaay
57a029189c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-27 21:13:01 +13:00
Maurice Makaay
671d68bc2c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-26 21:25:58 +01:00
Oxan van Leeuwen
5946c37925
Fix usage of deprecated climate method in anova ( #2801 )
2021-11-26 09:16:39 +01:00
Martin
17a37b1de9
Modbus_controller: Add custom command. ( #2680 )
2021-11-26 12:48:52 +13:00
Adrián Panella
e7827a6997
total_daily_energy: allow to disable restore mode ( #2795 )
2021-11-25 22:35:36 +01:00
Oxan van Leeuwen
9681dfb458
Correct constant for dynamic I2S bus in NeoPixelBus ( #2797 )
2021-11-26 09:37:27 +13:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Oxan van Leeuwen
8e1c9f5042
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:02:54 +13:00
Samuel Sieb
980b7cda8f
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-26 09:02:53 +13:00
Kamil Trzciński
3a72dd5cb6
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-26 09:02:53 +13:00
Dave T
3178243811
Fix frame scaling for animated gifs ( #2750 )
2021-11-26 09:02:53 +13:00
Maurice Makaay
d30e2f2a4f
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-26 09:02:53 +13:00
Oxan van Leeuwen
3637be251e
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:00:49 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Martin
ccfa1e23f0
Add support for sdp8xx ( #2779 )
2021-11-25 11:28:19 +13:00
rsumner
290da8df2d
Fix LEDC resolution calculation on ESP32-C3/S2/S3 ( #2794 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-25 11:22:51 +13:00
Martin
4b1d73791d
remove LEDC_HIGH_SPEED_MODE for C3, S2, S3 ( #2791 )
2021-11-25 08:06:08 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
krunkel
598f5b241f
Remove unnecessary write in AHT10 update ( #2675 )
2021-11-23 09:26:16 +01:00
Andreas Hergert
710096b1c6
Fixed wrong setup of tc9548a ( #2766 )
2021-11-23 09:20:55 +01:00
Dave T
07b882c801
Fix distorted gif frames when resizing ( #2774 )
2021-11-23 09:20:36 +01:00
cvwillegen
3e5331a263
Prettier date time display after time sync ( #2778 )
2021-11-23 09:20:20 +01:00
Samuel Sieb
1424091ee5
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-22 12:11:36 +13:00
Kamil Trzciński
61ec16cdfc
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-22 12:09:11 +13:00
Dave T
e5cb5756aa
Fix frame scaling for animated gifs ( #2750 )
2021-11-18 23:20:32 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Martin
8267f01ccd
Remove arduino dependency from hm3301 ( #2745 )
2021-11-18 08:03:46 +13:00
Sergey V. DUDANOV
6f9439e1bc
Fix byte order in NEC protocol implementation ( #2534 )
2021-11-17 18:35:50 +01:00
spattinson
06994c0dfc
Change LUT for ttgo t5 2.13inch to improve partial refresh ( #2475 )
2021-11-17 18:28:36 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
df6730be55
Move to use improv lib from platformio ( #2741 )
2021-11-17 18:23:17 +01:00
Franck Nijhof
8294d10d5b
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:31:38 +13:00
Evgeny
67558bec47
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 23:31:38 +13:00
Franck Nijhof
6c1ef398bb
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:28:31 +13:00
Evgeny
0469e19f54
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 09:52:40 +01:00
Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
rotarykite
c41547fd4a
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 08:00:26 +13:00
Ryan Hoffman
0d47d41c85
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-17 08:00:26 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
b0a0a153f3
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:05:51 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Alexandre-Jacques St-Jacques
09e8782318
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
fea3c48098
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 11:03:39 +13:00
Sergey V. DUDANOV
c2f57baec2
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
f4a140e126
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 11:03:39 +13:00
Krzysztof Białek
87e1cdeedb
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-15 11:03:39 +13:00
Jesse Hills
81a36146ef
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-15 11:03:39 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
lcavalli
b526155cce
Update device classes for binary sensors ( #2703 )
2021-11-12 16:12:31 +13:00
Jesse Hills
62c3f301e7
Only allow prometheus when using arduino ( #2697 )
2021-11-12 16:12:31 +13:00
Jesse Hills
38cb988809
Remove my.ha links from improv ( #2695 )
2021-11-12 16:12:31 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
Jesse Hills
a6873c1520
Only allow prometheus when using arduino ( #2697 )
2021-11-11 10:56:35 +01:00
Jesse Hills
f11220da3a
Remove my.ha links from improv ( #2695 )
2021-11-11 15:15:37 +13:00
Oxan van Leeuwen
b4cd8d21a5
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 12:25:41 +13:00
Maurice Makaay
7552893311
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 12:25:41 +13:00
Carlos Garcia Saura
21c896d8f8
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 12:25:40 +13:00
Jesse Hills
4b7fe202ec
Fix template number initial value being NaN ( #2692 )
2021-11-11 12:25:40 +13:00
Oxan van Leeuwen
bb9793d5b7
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 11:53:25 +13:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Carlos Garcia Saura
abf3708cc2
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 11:28:45 +13:00
Jesse Hills
4395d6156d
Fix template number initial value being NaN ( #2692 )
2021-11-10 23:24:48 +01:00
Jesse Hills
8cbb379898
Remove import (not sure how it got there)
2021-11-11 10:35:18 +13:00
Jesse Hills
19970729a9
Merge branch 'dev' into bump-2021.11.0b1
2021-11-11 10:10:04 +13:00
anatoly-savchenkov
f310cacd41
[ms5611] Re-implement conversion from ADC readings to sensor values ( #2665 )
2021-11-10 22:01:47 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
99c775d8cb
Introduce encode_value/decode_value() template functions ( #2662 )
2021-11-10 19:44:01 +01:00
Oxan van Leeuwen
4d43396835
Clean-up string sanitation helpers ( #2660 )
2021-11-10 19:42:41 +01:00
TVDLoewe
92321e219a
Max7219digit multiline ( #1622 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:41:04 +13:00
Oxan van Leeuwen
c422b2fb0b
Introduce byteswap helpers ( #2661 )
...
* Backport std::byteswap() in helpers.h
* Introduce convert_big_endian() function
* Use convert_big_endian() in i2c byte swap functions
2021-11-10 19:40:18 +01:00
Otto Winter
8aa72f4c1e
Neopixelbus redo method definitions ( #2616 )
2021-11-11 07:35:31 +13:00
Oxan van Leeuwen
15f9677d33
Introduce parse_number() helper function ( #2659 )
2021-11-11 07:15:06 +13:00
Carlos Garcia Saura
219b225ac0
[ESP32 ADC] Add option for raw uncalibrated output ( #2663 )
2021-11-10 19:12:57 +01:00
Oxan van Leeuwen
2ac232e634
Add missing hal.h include in esp32_camera_web_server ( #2689 )
2021-11-10 19:09:10 +01:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Martin
662773b075
modbus_controller: remove hard coded register size ( #2654 )
2021-11-10 16:24:44 +13:00
Carlos Garcia Saura
875b803483
Remove "delay_microseconds_accurate()" and improve systemwide delayMicroseconds() ( #2497 )
2021-11-10 16:22:00 +13:00
Guillermo Ruffino
6e5cfac927
fix rc switch protocol 6 ( #2672 )
2021-11-10 16:15:15 +13:00
Duncan Findlay
97eaf3d4a1
Set up output_switch at priority DATA instead of HARDWARE. ( #2648 )
2021-11-10 16:12:20 +13:00
cvwillegen
366552a969
Remote base add pronto protocol ( #2619 )
2021-11-10 16:11:35 +13:00
Guillermo Ruffino
57b07441a1
fix esp32 rmt receiver item array length ( #2671 )
2021-11-10 13:15:02 +13:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Jesse Hills
d6717c0032
Fix dashboard imports for adoption ( #2684 )
2021-11-10 08:38:20 +13:00
ychieux
f72389147d
SSD1306_base: Add support for 64x32 size and fix flip functions ( #2682 )
...
* Add support for SSD1306 OLED display 0.42inch 64x32 and fix a typo in __init__.py preventing flip functions to operate as intended
* convert tab to spaces
* fix typo on filename for __init__.py
2021-11-09 18:47:19 +01:00
Martin
add484a2ea
Fix gpio validation for esp32 variants ( #2609 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-09 07:29:28 +13:00
Paul Monigatti
a17a6d5346
Add HA Entity Category support to MQTT ( #2678 )
2021-11-08 10:03:30 +01:00
Maurice Makaay
be9439f10d
Fix for encrypted DSMR regression ( #2679 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-07 20:39:16 -03:00
Maurice Makaay
96a50f5c6b
Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino ( #2677 )
...
* Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino
* Make inclusion of the SPI library unconditional
As suggested by @Oxan. Because the component requires Arduino anyway, there is no need to make the inclusion conditional.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Fix Python lint issue
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-07 19:31:41 +01:00
Jesse Hills
3c0414c420
Add Entity categories for Home Assistant ( #2636 )
2021-11-08 07:24:52 +13:00
Maurice Makaay
b450d4c734
Fix CRC error during DSMR chunked message reading ( #2622 )
...
* DSMR chunk size from 50 to 500
* Still a few CRC errors with 500, upping to 1024.
* Adding timers to measure how long processing DSMR takes
* Handle chunked output from smart meter.
* Cleaning up and commenting the new chunk handling code
* Remove debug code.
* Fixing clang-tidy issues.
* Implementing chunked reading support for encrypted telegrams.
* Remove redundant extra delay for encrypted reader
* Beware not to flush crypted telegram headers
* Use insane data timeout for testing
* Improve logging
* Make clang-tidy happy
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-06 18:52:04 -03:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
niklasweber
379c3e98f5
Add restore_mode to rotary_encoder ( #2643 )
2021-11-03 07:32:24 +13:00
Carlos Garcia Saura
d54b4e7c44
Fix for noise in pulse_counter and duty_cycle components ( #2646 )
2021-11-02 08:27:57 +13:00
Jesse Hills
d8b3af3815
Expose webserver_port to the native API ( #2640 )
2021-11-01 09:33:04 +13:00
Otto Winter
2b04152482
Fix deep sleep invert_wakeup mode ( #2644 )
2021-10-31 16:07:06 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Geoffrey Van Landeghem
7eee3cdc7f
convert SCD30 into Component, polls dataready register ( #2308 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-10-31 15:29:22 +13:00
Ed
696643d037
BH1750: Fix a too high default H-res2 mode value ( #2536 )
2021-10-29 11:51:57 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Martin
2350c5054c
use update_interval for sntp synchronization ( #2563 )
...
* use update_interval for sntp synchronization
* revert override of default interval
2021-10-28 20:57:39 +02:00
Jesse Hills
73accf747f
Allow cloning/fetching Github PR branches in external_components ( #2639 )
2021-10-29 07:12:05 +13:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
niklasweber
980c2d4cae
Add publish_initial_value option to rotary encoder ( #2503 )
2021-10-28 08:09:37 +13:00
Jesse Hills
c2623a08e3
Fix select.set using lambda ( #2633 )
2021-10-27 08:27:51 +13:00
Jan Čermák
9f625ee7d1
Fix pin number validation for sn74hc595 ( #2621 )
2021-10-26 18:10:45 +02:00
Martin
2f85c27a05
fix modbus output ( #2630 )
2021-10-26 11:30:25 +02:00
Jesse Hills
a01f5f5cf1
Remove power and energy from sensors that are not true power ( #2628 )
2021-10-26 10:55:20 +02:00
Oxan van Leeuwen
87328686a0
Allow setting URL as platform_version ( #2598 )
2021-10-26 10:55:09 +02:00
Martin
81c11ba1f7
relax max entities checking ( #2629 )
2021-10-26 08:53:47 +13:00
Otto Winter
de06a781ff
ESP8266 disable PIO LDF ( #2608 )
2021-10-23 19:44:55 +02:00
0hax
a687b083ae
Teleinfo ptec ( #2599 )
...
* teleinfo: handle historical mode correctly.
In historical mode, tags like PTEC leads to an issue where we detect a
timestamp wheras this is not possible in historical mode.
PTEC teleinfo tag looks like:
PTEC HP..
Instead of the usual format
IINST1 001 I
This make our data parsing fails.
While at here, make sure we continue parsing other tags even if parsing
one of the tag fails.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: fix compilation with loglevel set to debug.
Signed-off-by: 0hax <0hax@protonmail.com>
2021-10-23 19:01:23 +02:00
Otto Winter
d85b7a6bd0
Bump platform-espressif8266 from 2.6.2 to 2.6.3 ( #2620 )
2021-10-23 12:37:50 +02:00
Andreas Hergert
1c4700f447
fixed dependency for pca9685 component ( #2614 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Andreas <andreas.hergert@otrs.com>
2021-10-22 18:52:47 +02:00
Andreas Hergert
83400d0417
Bugfix tca9548a and idf refactor anh ( #2612 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
2021-10-22 18:20:57 +02:00
Otto Winter
77a6461c9d
Fix ESP8266 OTA compression only starting framework v2.7.0 ( #2610 )
2021-10-22 17:23:31 +02:00
Otto Winter
6db9d1122f
Fix compiler warnings and update platformio line filter ( #2607 )
2021-10-22 16:52:43 +02:00
Otto Winter
83bef85415
Add owner to all libraries used ( #2604 )
2021-10-22 14:14:14 +02:00
Otto Winter
0d90ef94ae
Add OTA upload compression for ESP8266 ( #2601 )
2021-10-22 13:02:55 +02:00
Otto Winter
c08b21b7cd
Bump noise-c from 0.1.3 to 0.1.4 ( #2602 )
2021-10-22 12:12:07 +02:00
Paul Monigatti
be3cb9ef00
Add EntityBase properties to ESP32 Camera ( #2600 )
2021-10-22 12:10:29 +02:00
Otto Winter
9220d9fc52
Fix socket connection closed not detected ( #2587 )
2021-10-22 10:46:44 +02:00
Otto Winter
68c8547067
Add IDF support to dallas ( #2578 )
2021-10-21 22:48:28 +02:00
dependabot[bot]
1468acfced
Bump tzlocal from 3.0 to 4.0.1 ( #2553 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-21 22:46:05 +02:00
Oxan van Leeuwen
07a9cb910f
Fix validation of addressable light IDs ( #2588 )
2021-10-21 20:07:37 +02:00
Oxan van Leeuwen
c0fc5b48ae
Fix pin/component switchup in SX1509 pin configuration ( #2593 )
2021-10-21 19:55:19 +02:00
Oxan van Leeuwen
8735d3b83e
Fix PlatformIO version for latest Arduino framework ( #2590 )
2021-10-21 18:59:49 +02:00
Otto Winter
eccdef8211
Fix mDNS ESP8266 log not included ( #2589 )
2021-10-21 18:53:08 +02:00
Maurice Makaay
f2ebfe7aef
Add mDNS config dump ( #2576 )
2021-10-21 16:02:28 +02:00
Otto Winter
cac5b356db
ESP32 ADC use factory calibration data ( #2574 )
2021-10-21 16:01:33 +02:00
Otto Winter
c615dc573a
Fix ESP8266 dallas GPIO16 INPUT_PULLUP ( #2581 )
2021-10-21 14:39:36 +02:00
Otto Winter
1caabb6419
Fix ESP8266 OTA adds unnecessary Update library ( #2579 )
2021-10-21 14:20:57 +02:00
Otto Winter
e39f314e7a
Fix wifi ble coexistence check ( #2573 )
2021-10-21 12:24:01 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
Maurice Makaay
34606b0f1f
Fix MDNS for ESP8266 devices ( #2571 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-21 12:23:21 +02:00
Otto Winter
3af297aa76
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:32:27 +13:00
Jesse Hills
dad244fb7a
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 07:31:55 +13:00
Otto Winter
15b5968418
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:31:13 +13:00
Jesse Hills
e4d17e0b15
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 06:45:10 +13:00
Carlos Garcia Saura
e79f7ce290
[ESP32] ADC auto-range setting ( #2541 )
2021-10-20 19:44:51 +02:00
Martin
1b0e60374b
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:14:30 +13:00
Oxan van Leeuwen
3a760fbb44
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-20 10:14:30 +13:00
Martin
f5441a87e3
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:10:24 +13:00
Oxan van Leeuwen
5b5ead872b
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-19 12:56:49 +02:00
Maurice Makaay
4a1e50fed1
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-18 21:26:36 +13:00
Oxan van Leeuwen
723fb7eaac
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 15:31:01 +13:00
Jesse Hills
63a9acaa19
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 15:31:00 +13:00
Jesse Hills
0524f8c677
Fix const used for IDF recommended version ( #2542 )
2021-10-18 15:31:00 +13:00
Oxan van Leeuwen
ced11bc707
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 13:36:18 +13:00
Jesse Hills
6b9c084162
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 09:56:31 +13:00
Jesse Hills
644ce2a26c
Fix const used for IDF recommended version ( #2542 )
2021-10-18 09:55:35 +13:00
Oxan van Leeuwen
f83950fd75
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 20:28:43 +13:00
Oxan van Leeuwen
4dd1bf920d
Replace framework version_hint with source option ( #2529 )
2021-10-17 20:28:43 +13:00
Martin
98755f3621
Fix bug in register name definition ( #2526 )
2021-10-17 20:28:43 +13:00
Keith Burzinski
c3a8a044b9
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-17 20:28:42 +13:00
Martin
15b5ea43a7
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-17 20:28:42 +13:00
Oxan van Leeuwen
65d2b37496
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 19:53:49 +13:00
Oxan van Leeuwen
94d518a418
Replace framework version_hint with source option ( #2529 )
2021-10-15 22:07:05 +02:00
Carlos Garcia Saura
7cca673902
[esp-idf fix] increase FreeRTOS ticker loop from 100Hz to 1kHz ( #2527 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-15 22:06:49 +02:00
Maurice Makaay
384f8d97d8
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-15 22:06:32 +02:00
Oxan van Leeuwen
c82d5d63e3
Move TemplatableValue helper class to automation.h ( #2511 )
2021-10-15 22:05:11 +02:00
dependabot[bot]
653a3d5d11
Bump aioesphomeapi from 9.1.5 to 10.0.0 ( #2508 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-15 22:05:04 +02:00
Tom Matheussen
884b7201de
Continue ethernet setup if hostname fails ( #2430 )
2021-10-15 20:46:58 +02:00
Dmitriy Lopatko
dc15d1c8ec
use no hold master mode for si7021/htu21d ( #2528 )
2021-10-15 16:52:03 +02:00
Martin
6beb9e568a
Fix bug in register name definition ( #2526 )
2021-10-15 20:27:56 +13:00
Keith Burzinski
7178f10bda
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-15 20:26:26 +13:00
Oxan van Leeuwen
73940bc1bd
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
9b7fb829f9
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-15 09:42:43 +13:00
Dmitriy Lopatko
c51d8c9021
add missing include in sgp30 ( #2517 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
d8a6dfe5ce
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
5f7cef0b06
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
48ff2ffc68
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
b3b9ccd314
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
63d6b610b8
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-14 11:25:10 +02:00
Martin
8823024509
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-14 11:24:57 +02:00
Paul Monigatti
4896f870f0
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-14 21:04:50 +13:00
Dmitriy Lopatko
7e482901d9
add missing include in sgp30 ( #2517 )
2021-10-14 21:00:53 +13:00
Paul Monigatti
07b309e65d
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-14 20:58:35 +13:00
Oxan van Leeuwen
6bbb5e9b56
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-14 09:21:43 +13:00
Paul Monigatti
867fecd157
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-13 21:59:52 +02:00
Oxan van Leeuwen
05388d2dfc
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-14 08:53:00 +13:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Jesse Hills
bb86db869a
Fix bad merge
2021-10-13 22:09:38 +13:00
Jesse Hills
4c4dd23e15
Merge branch 'release' into dev
2021-10-13 22:05:18 +13:00
Sergio Mayoral Martínez
3dee057826
Add throttle_average sensor filter ( #2485 )
2021-10-13 11:35:30 +13:00
Jesse Hills
4406a08fa7
Allow multiple pn532_spi entries ( #2489 )
2021-10-13 09:06:52 +13:00
Rafael Treviño
c33077bc61
Improves ct_clamp component accuracy ( #2283 )
...
Co-authored-by: Rafa Treviño <rafael.trevino@bbva.com>
2021-10-13 08:42:51 +13:00
Rob Deutsch
a3eb2a7ee0
Added heatpumpir support ( #1343 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-13 07:38:19 +13:00
Maurice Makaay
d13134135b
Fix LoadProhibited crash for logger baud_rate 0 ( #2498 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-12 13:51:41 +02:00
Chris Nussbaum
b4f57972fb
Add on_open and on_closed triggers to cover ( #2488 )
2021-10-12 15:39:21 +13:00
Jesse Hills
6a5eb43454
Update Airthings BLE ( #2453 )
2021-10-12 11:56:47 +13:00
Dave T
04ec1c8b56
Consolidate CONF_RAW_DATA_ID to const.py ( #2491 )
2021-10-12 00:14:04 +02:00
niklasweber
d7ad155885
Fix reset on http_request without network connection ( #2474 )
...
* Fix reset problem when http_request is sent without network connection (#2501 )
* Fix format
2021-10-12 00:11:04 +02:00
Jan Čermák
85461a752a
Fix color temperature persistence on CWWW lights ( #2486 )
2021-10-11 23:56:35 +02:00
Dave T
039fbc677d
Replace deprecated COLOR_BLACK constant ( #2487 )
2021-10-11 23:44:05 +02:00
Jesse Hills
2c517e3e8c
Use arduino btStart for arduino framework ( #2457 )
2021-10-11 10:38:45 +13:00
definitio
42739f0b22
Add configuration for climate topics ( #2473 )
2021-10-10 17:55:22 +02:00
definitio
a1f9b0d7f2
Add configuration for cover topics ( #2472 )
2021-10-10 17:54:07 +02:00
Chris Nussbaum
c3b8c84131
Fix below freezing temperature for Inkbird sensors ( #2466 )
2021-10-10 10:53:58 +02:00
Paul Monigatti
471b82f727
EntityBase Refactor ( #2418 )
...
* Renamed Nameable to EntityBase (cpp)
* Renamed NAMEABLE_SCHEMA to ENTITY_BASE_SCHEMA (Python)
* Renamed cg.Nameable to cg.EntityBase (Python)
* Remove redundant use of CONF_NAME from esp32_touch
* Remove redundant use of CONF_NAME from mcp3008
* Updated test
* Moved EntityBase from Component.h and Component.cpp
* Added icon property to EntityBase
* Added CONF_ICON to ENTITY_BASE_SCHEMA and added setup_entity function to cpp_helpers
* Added MQTT component getters for icon and disabled_by_default
* Lint
* Removed icon field from MQTT components
* Code generation now uses setup_entity to setENTITY_BASE_SCHEMA fields
* Removed unused import
* Added cstdint include
* Optimisation: don't set icon if it is empty
* Remove icon from NumberTraits and SelectTraits
* Removed unused import
* Integration and Total Daily Energy sensors now inherit icons from their parents during code generation
* Minor comment correction
* Removed redundant icon-handling code from sensor, switch, and text_sensor
* Update esphome/components/tsl2591/tsl2591.h
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Added icon property to binary sensor, climate, cover, and fan component tests
* Added icons for Binary Sensor, Climate, Cover, Fan, and Light to API
* Consolidated EntityBase fields in MQTT components
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-10 10:37:05 +02:00
Nate Lust
92b85f98e8
Sgp40 fix ( #2462 )
...
* Sample from SGP40 sensor at the appropriate interval
The spg40 sensor must be sampled at 1Hz for the VOC index algorithm
to work correctly. This commit introduces a on device timer to
sample correctly seperately from updating the public state of the
component.
* Add missing configuration values for SGP40
The SGP40 component was not printing all of it's configuration in
dump_config, add in the missing store_baseline value.
* Address review comments
* Format according to clang-tidy
* Attempt 2 at clang tidy
2021-10-10 10:33:04 +02:00
definitio
c092d92d45
Fix cover state ( #2468 )
2021-10-10 10:31:15 +02:00
Ryan Mounce
e514a1fcd4
Use enum for Tuya fan direction datapoint ( #2471 )
...
Fix regression from PR2059. Tested with Arlec DCF5242HA.
2021-10-10 10:28:37 +02:00
davidmonro
a1b28cb36e
atm90e32: make the total_increasing class sensors actually be increasing totals. ( #2459 )
...
Co-authored-by: David Monro <david.monro@anu.edu.au>
2021-10-09 17:44:16 +02:00
Maurice Makaay
3f2d9abfe6
Correct I2C read() return val check in bh1750 component. ( #2465 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-09 10:30:21 +02:00
Otto Winter
95d7ad543f
API encryption switch to libsodium backend ( #2456 )
2021-10-07 22:05:26 +02:00
Jesse Hills
d9b2903d78
Add log line to show if API encryption is being used ( #2450 )
2021-10-07 22:04:55 +02:00
Otto Winter
9bf72ff05f
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-10-07 22:03:05 +02:00
Martin
5461f87ff0
I2c fix ( #2460 )
2021-10-07 21:18:00 +02:00
Otto Winter
1c58b17235
API encryption switch to libsodium backend ( #2456 )
2021-10-06 22:36:12 +02:00
Jesse Hills
22e3bc7cfe
Add id() for restoring global ( #2454 )
2021-10-06 22:35:11 +13:00
Paul Monigatti
955c96731e
Add Safe Mode Restart Switch ( #2437 )
2021-10-06 20:44:48 +13:00
Otto Winter
54a173dbf1
I2C re-introduce very verbose logging ( #2446 )
2021-10-06 11:57:23 +13:00
Jesse Hills
e083d7f4d0
Add log line to show if API encryption is being used ( #2450 )
2021-10-06 11:26:18 +13:00
Martin
a57580b5ab
Fix compilation error ( #2447 )
2021-10-05 17:56:32 +02:00
Paul Monigatti
6ec546a6a4
Improved validation for Addressable Light Partition Segments ( #2439 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-05 12:00:23 +13:00
NMC
877367677b
Add support for Airthing Wave Mini ( #2440 )
2021-10-05 11:56:34 +13:00
Otto Winter
87358e8843
Fix esp32 no longer has Hash internal lib ( #2441 )
2021-10-04 16:14:51 +02:00
Maurice Makaay
5c06cd8eb3
Fix I2C recovery ESP32 esp-idf ( #2438 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-04 12:33:25 +02:00
Stefan Agner
46b4c970d1
Fix socket abstraction for ESP-IDF v4 ( #2434 )
2021-10-03 22:21:45 +02:00
Stefan Agner
49f46a7cdd
Use size_t to fix comparision using RISC-V toolchain ( #2436 )
2021-10-03 21:55:19 +02:00
Stefan Agner
1627dff166
Disable dependency finder on ESP32 ( #2435 )
2021-10-03 21:53:40 +02:00
Maurice Makaay
cee08debff
Hotfix for ESP8266 OTA issue: ERROR Error binary size ( #2432 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-03 16:15:01 +02:00
Otto Winter
912793eddf
Convert time to use tzdata ( #2425 )
2021-10-03 14:10:53 +02:00
Keith Burzinski
eaa5200a35
Thermostat publish state fix ( #2427 )
2021-10-03 14:10:43 +02:00
cvwillegen
a7687c3e17
Add local MAC address to WiFi info ( #2428 )
2021-10-03 13:27:59 +02:00
Maurice Makaay
932e0469f7
Fix ESP32 esp-idf OTA updates ( #2424 )
...
* WIP on separating out the OTA backends.
* Split off the individual OTA backends.
* Cleanup the three backends, split into .h and .cpp.
* After successfull flashing, activate the new boot partition.
* Fix linting issues.
* Minor cleanup
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-02 16:02:01 +02:00
Maurice Makaay
d0dfc94a61
Fix I2C recovery on Arduino ( #2412 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 12:53:37 +02:00
Maurice Makaay
5a2984d03a
Fix attach_interrupt(...) for esp-idf framework ( #2416 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 10:11:07 +02:00
Maurice Makaay
c89018a431
Option to ignore CRC for EFuse MAC address ( #2399 )
...
* Accept changes as proposed by black.
* Added test and implemented optional correctly.
* Disable PHY RF full calibration (because it calls the breaking MAC retrieval function).
* Disable CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE instead of enable, dummy!
* Rename CONF_IGNORE_EFUSE_MAC_CRC to CONF_ESP32_IGNORE_EFUSE_MAC_CRC.
* Removed unused import.
* Fix ordering of constants.
* Moved all MAC address logic to core helpers.
* Use pretty MAC address for the log.
* Use standard MAC formatter function for debug component.
* Fix clang-formatting.
* Fix clang-formatting.
* Brought wording of comments in line with other function-describing comments.
* Processed code review by @OttoWinter
* Add USE_ESP32_IGNORE_EFUSE_MAC_CRC to defines.h
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-30 18:08:15 +02:00
Oxan van Leeuwen
1031ea4313
Fix line endings normalization ( #2407 )
...
* Strip CRLF line endings from modbus controller files
* Normalize all line endings to LF
2021-09-30 18:07:28 +02:00
Oxan van Leeuwen
5b0fbbaada
Replace std::move() with const references where possible ( #2421 )
...
* Replace std::move() with const references where possible
* Fix formatting
2021-09-30 16:25:08 +02:00
Andy Allsopp
946db3fd50
Add viewport meta tag to web server layout ( #2419 )
...
* Update web_server.cpp
Added viewport meta tag to web_server.cpp in order to better control layout on mobile browsers. Adds 70 characters. Vastly improves accessibility on mobile devices.
* Update web_server.cpp
split line to meet clang format requirement.
* Update web_server.cpp
Reworked line break for clangtidy
2021-09-30 13:03:30 +02:00
WeekendWarrior1
3dfc8d4291
String manipulation filters for text sensors ( #2393 )
...
* initial text sensor filter POC
* fixed verbose logging
* add append, prepend, substitute filters
* add to lower, get to upper working without dummy
* clang lint
* more linting...
* std::move append and prepend filters
* fix verbose filter::input logging
* value.c_str() in input print
* lambda filter verbose log fix
* correct log tag, neaten to upper and to lower
* add on_raw_value automation/trigger
2021-09-29 23:25:06 +02:00
Oxan van Leeuwen
4f5e4f3b86
Move #ifdef to after header include ( #2417 )
...
defines.h needs to be included first.
Fixes esphome/issues#2490 .
2021-09-29 23:21:52 +02:00
Jesse Hills
505d1d78fb
Remove default initializations from tuya cover ( #2415 )
2021-09-29 12:19:19 +13:00
Otto Winter
855c98d815
Fix tuya cover lint checks ( #2414 )
2021-09-28 23:15:52 +02:00
Marek Marczykowski-Górecki
c26ea7e4e0
Tuya: add cover component ( #2279 )
2021-09-29 10:02:13 +13:00
irtimaled
c39ac9edfe
Support HSV-based color support on tuya light ( #2400 )
...
* fix: stop tuya light state getting reset
* fix typo
* Support for HSV color in Tuya
* Clamp formatting
2021-09-28 22:19:17 +02:00
Stephen Tierney
af04f565cf
Add support for SCD4X ( #2217 )
...
* Initial commit
* clang-format fixes
* Update CODEOWNERS
* clang-format fixes
* Fix merge error
* Fix missing return
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-28 22:10:25 +02:00
Jesse Hills
8ef2ad17b5
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:41:51 +13:00
Otto Winter
4579f78bf9
Merge pull request from GHSA-48mj-p7x2-5jfm
2021-09-28 15:39:41 +13:00
Sergey V. DUDANOV
1853407645
Midea fix ( #2395 )
2021-09-28 15:36:23 +13:00
Jesse Hills
2234f6aacf
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:33:30 +13:00
Otto Winter
be965a60eb
Merge pull request from GHSA-48mj-p7x2-5jfm
...
* Move web_server auth to web_server_base
* Fix
* Fix
* Add middleware system
2021-09-28 13:53:38 +13:00
0hax
5624fafb3a
Fix handling of timestamps in Teleinfo component. ( #2392 )
...
* teleinfo: avoid a buffer overflow.
When reading tag or values, data is written to the buffer even if the
size if bigger than the buffer. Add a new 'max_len' argument to
get_field() to avoid this error.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: read extra timestamp field for some tags.
Some tags has an extra timestamp field that need to be read before the
actual data.
The code is inspired by Jpsy work:
29339c14f9
2021-09-27 22:32:08 +02:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
irtimaled
1ba560dc9e
fix: stop tuya light state getting reset ( #2401 )
...
* fix: stop tuya light state getting reset
* fix typo
2021-09-27 21:54:51 +02:00
Maurice Makaay
8c86a18dc6
Add missing include for defines.h. ( #2403 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-27 21:53:47 +02:00
Christian Taedcke
b2d516c70a
ccs811: Skip reading data if it is not available ( #2404 )
...
On bootup the ccs811 reports that no data is available. No error flag
is set in that case. The current implementation ignores this, reads
and publishes the invalid data, which is 0xFDFD for both tvoc and co2
in my case.
This commit fixes this and does not read and publish invalid data.
2021-09-27 21:53:05 +02:00
Otto Winter
45940b0514
Dashboard node import and render in browser ( #2374 )
2021-09-27 10:10:53 -07:00
Otto Winter
97e76d64d6
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-09-27 11:40:28 +02:00
Jesse Hills
756c6721e9
Fix NDEF URI casing ( #2397 )
2021-09-27 11:11:27 +13:00
JonasEr
4c390d9f9f
Extend nfc ndef records with Text ( #2191 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 09:38:08 +13:00
Sergey V. DUDANOV
0d0954d74b
Midea fix ( #2395 )
2021-09-27 09:32:33 +13:00
Martin
7672ba2c8d
Modbus controller ( #1779 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-27 09:27:24 +13:00
WeekendWarrior1
4d28afc153
add fan.cycle_speed action ( #2329 )
2021-09-27 08:32:46 +13:00
irtimaled
7246f42a8e
Tuya rgb support ( #2278 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-26 21:34:06 +13:00
irtimaled
bdcffc7ba9
fix: Setting Tuya string DP value ( #2394 )
2021-09-26 21:27:43 +13:00
rbaron
95a6715b2b
Adds light sensor support for b-parasites ( #2391 )
2021-09-25 13:16:27 +02:00
Otto Winter
5342edf04a
Misc fixes for esp-idf ( #2386 )
2021-09-25 10:05:32 +02:00
Otto Winter
d344b1ca0e
Fix arduino esp32 wifi v2 ( #2389 )
2021-09-25 10:04:57 +02:00
Otto Winter
278863d027
Fix some issues with wifi driver after IDF refactor ( #2387 )
2021-09-25 09:16:32 +02:00
Otto Winter
8503e08ee6
Fix InterruptLock on ESP-IDF ( #2388 )
2021-09-25 09:14:07 +02:00
Otto Winter
aec02afcdc
Fix clang-tidy header filter ( #2385 )
...
* Fix clang-tidy header filter
* Allow private members
* Fix clang-tidy detections
* Run clang-format
* Fix remaining detections
* Fix graph
* Run clang-format
2021-09-24 18:02:28 +02:00
Maurice Makaay
52dd79691b
Read unencrypted DSMR telegrams in chunks ( #2382 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-24 14:15:22 +02:00
Christian Taedcke
963b28181f
Always execute i2c bus recovery on setup ( #2379 )
2021-09-23 20:11:40 +02:00
Christian Taedcke
210a9a4162
Fix esp-idf pinmask bit-shift overflow ( #2380 )
2021-09-23 18:24:29 +02:00
Paul Monigatti
ea6a7a22ff
Fix ESP8266 ADC ( #2376 )
2021-09-23 10:45:41 +02:00
Stijn Tintel
5ddba719c5
Fix ir_climate on ESP32-C3 ( #2314 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 20:13:24 +02:00
Otto Winter
b398d826c1
Fix two i2c error code return errors ( #2375 )
2021-09-22 20:07:43 +02:00
Philipp Riederer
edb557f79e
ledc: do not try to write_state to an uninitialized output ( #1732 )
...
Co-authored-by: Philipp Tölke <ptoelke@tecracer.de>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 19:50:19 +02:00
Martin
262d69308d
fix i2c scanning eror for Arduino ( #2364 )
2021-09-22 19:08:42 +02:00
Oxan van Leeuwen
ed3ad615d8
Fix compilation due to incompatibility between #1237 and IDF changes ( #2372 )
2021-09-22 14:07:39 +02:00
ZJY
66761ff340
Add SSD1305 support to SSD1306 integration along with few new options ( #1902 )
...
* Add serveral options for SSD1306 integration
* Add SSD1305 support
(SSD1305 is similar to SSD1306, it seems SSD1305 has
brightness and color register but does not have charge pump)
* Add some description when manipulating registers
* Add flip, offset and invert option to get more compatibility
with various display modules
* Fix typo `setup_ssd1036' -> `setup_ssd1306'
* Add SSD1306 brightness validation tip
* Add more description, limit offset range
* Changes according to linter
* Fix test
* Raise error instead of using warning
* Fix wrong logic
* Remove logger
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Remove logging import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-22 13:47:41 +02:00
Gustavo Ambrozio
8bebf138ee
Wifi scan results ( #1605 )
...
* adding a scan results wifi text sensor
* Code comment
* Adding scan results to test
* Removing redundant call
* linting
* Better method to update wifi info
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Getting loop back
At least for now.
* Trying out suggestion again
* Applying cr suggestions
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-09-22 13:44:09 +02:00
wifwucite
fd836e982e
Mqtt topics to support numeric fan speed ( #1859 )
...
* numeric speed added
* when dumping config for MQTT components log a note when skipped due to is_internal
* added new topics to paython code validation/generation
* reformatted with black
* formatting corrected
* use dump_config_ mechanism to skip internal components
* use dump_config_ mechanism to skip internal components
* style issues resolved
* do_dump_config removed
* formatting fixed
* formatting fixed
* Drop parent dump_config() calls
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 13:42:58 +02:00
Trevor North
e32722db70
Allow sloppy datapoint message length ( #1982 )
...
This allows datapoint update messages to be handled even if the overall
message is longer than required (likely that it contains trailing empty
bytes).
The specific type handling will read only the expected data lengths so
we only need to hard bail if we have too little data not too much.
2021-09-22 13:29:05 +02:00
Stephen Tierney
b20760c93c
Add support for LTR390 ( #1505 )
...
* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9
2021-09-22 13:24:19 +02:00
Jesse Hills
654e31124e
Correctly invert the float output state ( #2368 )
2021-09-22 22:59:03 +12:00
Stanislav Meduna
8e36e1b92e
ili9341: use larger SPI transfers ( #1628 )
...
The original version uses write_byte to tranfer every byte of
the display buffer which is quite extensive as every byte needs
to be waited for in the SPI driver.
This patch prepares transfers in 64-byte chunks. The result is
a visible faster redraw of the display.
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 12:43:17 +02:00
Tommy van der Vorst
9fe7b08874
Add support for Waveshare 7.5 inch (C) bichromatic display (black-and-white only for now) ( #1844 )
...
* Add support for Waveshare 7.5 inch (B) bichromatic display (black-and-white only for now)
* Use drawing commands specific to bichromatic displays
* Fix inaccurate comment
* Fix merge error
* Formatting
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:39:41 +02:00
Robert Resch
f1364d4af4
Combine code of xiaomi_miscale and xiaomi_miscale2 ( #2266 )
...
* Combine xiaomi_miscale and xiaomi_miscale2
* check if message contains impedance
* auto detect scale version
* remove xiaomi_miscale2
* fix lint errors
* Apply suggestions from code review
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Apply suggestions from code review on old code
* Fix clang-tidy warnings
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:12:55 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Niccolò Maggioni
0929a0f8aa
Discard senseair commands echoes & fix calibration result check ( #2358 )
2021-09-22 11:15:51 +02:00
Paul Monigatti
13b3412b45
Fix Dallas parent not being set ( #2369 )
2021-09-22 11:12:42 +02:00
Maurice Makaay
888e315553
Fix OTA crash during reading of new bin file. ( #2366 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-22 10:37:46 +02:00
WeekendWarrior1
40e0100c1e
add = to default font glpyh list ( #2361 )
2021-09-22 16:57:16 +12:00
Paul Monigatti
c51352d04d
Allow non-addressable lights in light partitions ( #2256 )
2021-09-22 13:59:21 +12:00
Paul Monigatti
c8a8acd46e
Fix ESP8266 preference loading ( #2367 )
2021-09-22 13:55:49 +12:00
Otto Winter
bbac1534a3
Fix ESP8266 preferences not set up ( #2362 )
2021-09-21 21:59:11 +02:00
Maurice Makaay
92a24d52be
Fix OTA password mismatch error. ( #2363 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-21 17:11:58 +02:00
Alex
491f8cc611
Configurable Flash Write Interval ( #2119 )
...
Co-authored-by: Alex <33379584+alexyao2015@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-21 13:47:51 +02:00
Otto Winter
7c884329eb
Fix MDNS not registered ( #2359 )
2021-09-21 16:34:56 +12:00
Martin
bac58bba4d
fixes compilation error in rtttl ( #2357 )
...
Compilation error for millis() and delay() after #2303
2021-09-20 22:13:46 +02:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
1e8e471dec
Introduce call_dump_config() indirection ( #2325 )
2021-09-20 11:16:31 +02:00
Christian Taedcke
9ebe075f9b
Add deep sleep wakeup from touch ( #1238 ) ( #2281 )
2021-09-20 20:12:32 +12:00
Aljaž Srebrnič
3052c64dd7
Add invert_colors option for st7735 ( #2327 )
2021-09-20 20:08:08 +12:00
poptix
81685573e1
Properly calculate negative temperatures in sm300d2 ( #2335 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-20 19:44:18 +12:00
synco
945ed5d3bd
Added graphing component ( #2109 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-20 19:29:47 +12:00
besteru
82eca13d7b
Fix error reporting for DHT bit read loop ( #2344 )
2021-09-20 09:14:44 +02:00
synco
5f21b925da
Calculating the AC only component of the samples ( #1906 )
...
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:12:50 +02:00
Oxan van Leeuwen
8bda8e5393
Clean-up sensor integration ( #2275 )
2021-09-20 14:34:59 +12:00
Otto Winter
7c17e72db4
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
d180aee57f
Apply color brightness to addressable light effects ( #2321 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
e3ffecefc0
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
4c61cf153c
Light transition fixes ( #2320 )
2021-09-20 14:16:56 +12:00
Paul Monigatti
c78fb90e2f
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-20 14:16:39 +12:00
Otto Winter
a990898256
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 10:33:10 +12:00
Luca Gugelmann
c60c618204
Fix SPIDevice::write_byte16 to actually take a 16 bit argument ( #2345 )
2021-09-20 09:19:20 +12:00
Stefan Rado
53bd197c44
Add eco mode to tuya climate component ( #1860 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:17:43 +12:00
dependabot[bot]
dbb195691b
Bump pylint from 2.10.2 to 2.11.1 ( #2334 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-19 19:22:28 +02:00
Oxan van Leeuwen
50da630811
Apply color brightness to addressable light effects ( #2321 )
2021-09-19 18:46:26 +02:00
Kamil Trzciński
30eca885c9
Add esp8266_disable_ssl_support: config option ( #2236 )
2021-09-19 18:46:17 +02:00
Oxan van Leeuwen
f76685fccf
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-19 18:31:31 +02:00
Oxan van Leeuwen
68d547595e
Light transition fixes ( #2320 )
2021-09-19 18:31:20 +02:00
Paul Monigatti
64341d1d18
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-19 18:30:41 +02:00
Matthew Mazzanti
8f3a739da7
Allow transforms and flashes to not update remote_values ( #2313 )
2021-09-16 05:59:58 +12:00
Oxan van Leeuwen
c6dc8a11e2
Add namespace to all PlatformIO library references ( #2296 )
...
* Remove unnecessary duplication in platformio.ini
* Add namespace to all platformio library references
* Add cmake-build-* to gitignore
They're generated by the CLion add-on for each PlatformIO environment.
Listing them all separately seems nonsensical.
2021-09-15 19:01:31 +02:00
Guillermo Ruffino
d281e59f3a
ac_dimmer increase gate time for robotdyn ( #1708 )
...
* ac_dimmer increate gate time for robotdyn
* add explanation on longer gate enable time
2021-09-15 08:40:52 -03:00
Stefan Rado
2db8c42e1d
Support direct relay state feedback for tuya climate component ( #1668 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-15 20:23:35 +12:00
Jesse Hills
ad5f2cd748
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:01:54 +12:00
Maurice Makaay
efae363739
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 19:01:54 +12:00
jsuanet
3b9d126322
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 19:01:54 +12:00
Jesse Hills
0ea77de98c
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:00:51 +12:00
Maurice Makaay
19014331d8
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 08:48:27 +02:00
Guillermo Ruffino
de33cbd7e7
Dsmr updates ( #2157 )
...
* add option to use check_crc
* ignore newline before ( in parsing
* add gas delivered text for raw sensor
* fix compile issue when not listing any sensor
* make gas_mbus_id configurable
* update dsmr lib for clang
2021-09-14 22:14:49 -03:00
JonasEr
103ba4c696
Bug fix of NFC message & records becoming inaccessible in on_tag lambdas ( #2309 )
2021-09-15 10:06:43 +12:00
jsuanet
5a90b83f63
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 09:22:45 +12:00
Oxan van Leeuwen
716039e452
Use standard version of make_unique when available ( #2292 )
2021-09-14 14:27:35 +02:00
Jesse Hills
89f2ea5725
Fix binary strobe ( #2301 )
2021-09-14 23:07:07 +12:00
Jesse Hills
a32ad33b4e
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 23:07:07 +12:00
Otto Winter
a328fff5a7
Fix api noise explicit reject ( #2297 )
2021-09-14 23:07:07 +12:00
Otto Winter
233783c76c
API Noise logging ( #2298 )
2021-09-14 23:07:07 +12:00
Jas Strong
460a144ca8
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-14 23:06:13 +12:00
Oxan van Leeuwen
23ead416d5
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-14 23:06:13 +12:00
Jesse Hills
4cc2817fcd
Fix binary strobe ( #2301 )
2021-09-14 22:59:15 +12:00
Jesse Hills
d437cc915c
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 22:40:45 +12:00
Otto Winter
dd3f2f6c7e
Fix api noise explicit reject ( #2297 )
2021-09-14 11:53:49 +02:00
Otto Winter
855112dfc3
API Noise logging ( #2298 )
2021-09-14 09:53:37 +02:00
Otto Winter
e92a9d1d9e
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-14 07:13:00 +12:00
Oxan van Leeuwen
4eb51ab4d6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-14 07:12:59 +12:00
Oxan van Leeuwen
e6b0a0ca2b
Clean-up sensor integration ( #2275 )
2021-09-13 18:58:49 +02:00
Oxan van Leeuwen
924df1e7de
Run clang-tidy against Arduino 3 ( #2146 )
...
* Add macros header with more usable Arduino version defines
* Change Arduino version checking to use our version defines
* Add missing ESP8266 check
* Rename Arduino version macro to ARDUINO_VERSION_CODE
* Upgrade clang-tidy to use Arduino 3
* Fix clang-tidy warnings
* Upgrade NeoPixelBus to upstream 2.6.7
* Use Arduino-version-appropriate API to set redirect flags
* Remove now unnecessary CLANG_TIDY ifdefs
* Add preprocessor hackery to avoid including pgmspace.h
* Bump base image to 4.1.1 and update lint
* Fix nfctag
* Fix make_unique ambiguous
* Fix ignore name
* Fix ambiguous v2
* Remove unused begin
* Cast time_t to prevent issues on platforms where time_t is 32bit
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:55:04 +02:00
Otto Winter
ed7983af41
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-13 18:52:53 +02:00
Oxan van Leeuwen
40c474cd83
Run clang-tidy against ESP32 ( #2147 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:11:27 +02:00
Oxan van Leeuwen
133a17d6eb
Add esphal.h include to inkplate6 component ( #2286 )
2021-09-13 16:55:01 +02:00
Oxan van Leeuwen
fe47ddc27a
Convert st7735.h to use LF line endings ( #2287 )
2021-09-13 16:39:35 +02:00
Tercio Filho
aad03f1bf5
Fix issue #2054 . PZEM004T Component doesn't set the module address. ( #1784 )
2021-09-13 15:36:01 +02:00
Otto Winter
a4867a00ea
Activate owning-memory clang-tidy check ( #1891 )
...
* Activate owning-memory clang-tidy check
* Lint
* Lint
* Fix issue with new NfcTag constructor
* Update pointers for number and select
* Add back the NOLINT to display buffer
* Fix merge
* DSMR fixes
* Nextion fixes
* Fix pipsolar
* Fix lwip socket
* Format
* Change socket fix
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-13 11:31:02 +02:00
James Braid
c6109024aa
Fix SM300D2 sensor component routines so they correctly read the sensor output ( #2159 )
2021-09-13 11:23:59 +02:00
Kamil Trzciński
8a2b1d9359
Expose select on Frontend web_server: ( #2245 )
2021-09-13 10:06:28 +02:00
Jas Strong
63a186bdf9
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-13 09:54:48 +02:00
Oxan van Leeuwen
d594a6fcbc
Store strings only used for logging in flash ( #2274 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 09:48:52 +02:00
Oxan van Leeuwen
e18dfdd656
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-13 09:39:18 +02:00
Oxan van Leeuwen
0cd24c629a
Compatibility with clang-tidy v14 ( #2272 )
2021-09-13 09:35:55 +02:00
Oxan van Leeuwen
f31e0532c4
Untangle core headers (part 1) ( #2276 )
2021-09-13 09:33:29 +02:00
irtimaled
f0b6aabc96
Support inverting color temperature on tuya lights ( #2277 )
2021-09-13 09:33:20 +02:00
Oxan van Leeuwen
97a18717e6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-13 12:44:39 +12:00
poptix
87842e097b
sm300d2: Accept (undocumented) 0x80 checksum offset. ( #2263 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-10 21:34:38 +12:00
Jesse Hills
7dd40e2014
Fix a few ESP32-C3 compiler issues ( #2265 )
...
* Fix using Serial when using ESP32-C3 standard pins
* Force type for std::min in pn532
* Fix variable size where size_t is different on exp32-c3
2021-09-10 21:34:38 +12:00
poptix
3d71e2e189
sm300d2: Accept (undocumented) 0x80 checksum offset. ( #2263 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-10 21:05:25 +12:00
Jesse Hills
affaaf7d2c
Fix a few ESP32-C3 compiler issues ( #2265 )
...
* Fix using Serial when using ESP32-C3 standard pins
* Force type for std::min in pn532
* Fix variable size where size_t is different on exp32-c3
2021-09-10 12:10:28 +12:00
Stephen Tierney
d2616cbdfc
PMSA003i Update state_class and async ( #2216 )
...
* Update component (state_class and async)
* No need to specify empty device class
* Remove unused import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-09 10:14:08 +12:00
Keith Burzinski
faf1c8bee8
SGP40 sensor start-up fix ( #2178 )
2021-09-09 09:42:35 +12:00
Peter van Dijk
f09aca4865
pm1006: add support for sending a measurement request ( #2214 )
2021-09-09 09:35:00 +12:00
Jesse Hills
cc52f37933
Revert "Dont dump legacy fields ( #2241 )" ( #2259 )
...
This reverts commit 97eba1eecc
2021-09-09 09:29:08 +12:00
Otto Winter
e5051eefbc
API encryption ( #2254 )
2021-09-09 09:22:47 +12:00
Peter van Dijk
9e5cd0da51
ccs811: publish firmware version; log bootloader and HW version; fix a bug ( #2006 )
2021-09-09 09:19:43 +12:00
Sergey V. DUDANOV
4e120a291e
Midea support v2 ( #2188 )
2021-09-09 09:10:02 +12:00
Otto Winter
2790d72bff
Convert API to use sockets ( #2253 )
...
* Socket component
* Lint
* Lint
* Fix esp8266 missing INADDR_ANY
* API convert to sockets and frame helper
* Fix compile error
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-08 12:52:57 +02:00
Otto Winter
e44f447d85
Fix socket not setting callbacks early enough ( #2260 )
2021-09-08 12:02:32 +02:00
Otto Winter
f924e80f43
Socket component ( #2250 )
2021-09-08 15:41:42 +12:00
Chris Nussbaum
6180ee8065
Template sensors always publish on update interval ( #2224 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-08 15:36:49 +12:00
wifwucite
1be106c0b5
Fix fan speed restore issue on boot ( #1867 )
2021-09-08 15:30:17 +12:00
dgtal1
b0533db2eb
Add new trigger to fan component on_speed_set ( #2246 )
2021-09-08 15:15:57 +12:00
Otto Winter
dba502c756
Logger prevent recursive logging ( #2251 )
2021-09-08 08:57:20 +12:00
Oxan van Leeuwen
d9cb64b893
Add device classes new in HA 2021.9 ( #2248 )
2021-09-07 10:12:26 +12:00
Kamil Trzciński
2d91e6b977
template: select: fix initial_value cannot be used with lambda ( #2244 )
2021-09-07 08:00:08 +12:00
Jesse Hills
e2d97b6f36
Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2204 )
2021-09-06 08:57:58 +12:00
Jesse Hills
97eba1eecc
Dont dump legacy fields ( #2241 )
2021-09-06 08:36:55 +12:00
Jesse Hills
ff6bed54c6
Remove last_reset_type and convert all those sensors to TOTAL_INCREASING ( #2233 )
2021-09-06 08:30:47 +12:00
Jesse Hills
f9b0666adf
Allow using a git source for a package ( #2193 )
2021-09-06 08:23:06 +12:00
Christian Ferbar
77508f7e44
Fix UARTComponent hardware vs software UART0 conflict ( #2229 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-04 14:49:34 +12:00
Oxan van Leeuwen
54de0ca0da
Reject template select/number/switches that don't handle user input ( #2230 )
2021-09-04 14:46:53 +12:00
Oxan van Leeuwen
f364788c03
Expose WHITE/CWWW/RGBCT color modes over MQTT ( #2231 )
2021-09-04 14:32:33 +12:00
DAVe3283
00aaf84c37
Fix uptime's state_class (esphome/issues#2337) ( #2205 )
2021-09-03 16:58:30 +12:00
Kamil Trzciński
b01bc76dc5
mqtt_sensor: properly send state_class via MQTT ( #2228 )
2021-09-03 16:37:18 +12:00
Chris Nussbaum
a4d024f43d
Add is_on and is_off conditions for the fan component ( #2225 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-02 12:16:11 +12:00
Alex
9937ad7fa0
Cleanup flash transitions ( #2227 )
2021-09-02 11:56:40 +12:00
Petko Bordjukov
edcd88123d
iBeacon support for ble_presence ( #1627 )
2021-09-02 11:46:15 +12:00
Alex
ea1b5e19f0
Add transitions to light flash ( #2201 )
2021-08-31 14:18:16 +12:00
Jesse Hills
54337befc2
Fix some lint errors in pylint 2.10.2 ( #2226 )
2021-08-31 14:00:58 +12:00
Jérôme Laban
140ef791aa
Support for the AirThings Wave Plus ( #1656 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 14:00:30 +12:00
WeekendWarrior1
03190611bb
Add H-Bridge fan component ( #2212 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 10:10:22 +12:00
Marcio Granzotto Rodrigues
9218e85bd6
Remove footer validation for fujitsu_general ( #2196 )
2021-08-31 06:03:30 +12:00
Alessandro Campolo
b5de43b225
cs_pin made optional for ili9341 ( #2219 )
2021-08-30 09:07:06 +12:00
Jesse Hills
b955527f6c
Fix css/js file loading for webserver when esphome not executed form config directory ( #2207 )
2021-08-26 15:34:39 +12:00
marsjan155
94b28102f5
Add st7920 display, ( #1440 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 14:33:03 +12:00
WeekendWarrior1
de871862a8
Optionally set direction on fan.turn_on action ( #2171 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 10:25:24 +12:00
Jesse Hills
3be56fd502
Fix SDM energy units to be KILO... ( #2206 )
2021-08-26 09:27:00 +12:00
Jesse Hills
39cd2838df
Revert "Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2186 )" ( #2202 )
...
This reverts commit b0fa317302
2021-08-25 19:38:51 +12:00
Stephan Peijnik-Steinwender
565473c90c
ST7789V: Make backlight_pin optional ( #2180 )
2021-08-24 22:57:53 +12:00
mtl010957
ed68a0e773
Internally all temperature units are Celsius so just send it directly ( #1840 )
2021-08-24 13:38:59 +12:00
Samuel Sieb
e2640c8368
Fix template select lambda ( #2198 )
2021-08-24 13:26:59 +12:00
Chris Nussbaum
eff626248f
Tuya fan component uses enum datapoint type for speed instead of integer ( #2182 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-08-24 13:20:39 +12:00
puuu
ce29a3b07a
mqtt_light: remove legacy API config that is not compatible with HA 2021.8 ( #2183 )
2021-08-24 13:18:40 +12:00
Oxan van Leeuwen
1c1ad32610
Add deprecated attribute to some deprecated types/methods ( #2185 )
2021-08-24 06:48:12 +12:00
Jesse Hills
71237e2f76
Fix template select log message mentioning number ( #2194 )
2021-08-23 21:21:30 +12:00
Oxan van Leeuwen
518c271eba
Fix addressable light control without transitions & effects with transitions ( #2187 )
2021-08-23 20:44:24 +12:00
Oxan van Leeuwen
d71996e58d
Reduce static RAM usage ( #2140 )
2021-08-23 20:43:54 +12:00
Oxan van Leeuwen
2f33cd2db5
Remove double scheduling from addressable lights ( #1963 )
2021-08-23 20:00:38 +12:00
Oxan van Leeuwen
5ec9bb0fb5
Clean-up constant definitions ( #2148 )
2021-08-23 19:21:30 +12:00
Oxan van Leeuwen
8cc3cbb22e
Add macros header with more usable Arduino version defines ( #2145 )
2021-08-23 19:19:21 +12:00
puuu
b0fa317302
Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2186 )
2021-08-21 22:26:24 +12:00
Jesse Hills
5cb56bc677
Set SDM voltage state class to measurement ( #2181 )
2021-08-19 21:28:58 +12:00
Jesse Hills
29db77c9c9
Merge branch 'release' into dev
2021-08-18 15:17:33 +12:00
Jesse Hills
4e3b95d120
Add new total_increasing state-class for Home Assistant 2021.9+ ( #2166 )
2021-08-18 11:11:39 +12:00
Jesse Hills
61a9c9fa33
Remove specified accuracy_decimals from total_daily_energy ( #2174 )
2021-08-18 11:11:39 +12:00
Jesse Hills
9c605f2d46
Send dirty states when screen wakes up ( #2167 )
2021-08-18 11:11:39 +12:00
Franck Nijhof
44bb5a89c8
Add Gas device class to DSMR component ( #2169 )
2021-08-18 11:11:39 +12:00
Daniel Hyles
cbdb96f105
Add a dummy color temp ( #2161 )
2021-08-18 11:11:39 +12:00
Oxan van Leeuwen
9ee3463d07
Initialize color temperature to value within range if possible ( #2168 )
2021-08-18 11:11:39 +12:00
Jesse Hills
f0b14055b6
Add new total_increasing state-class for Home Assistant 2021.9+ ( #2166 )
2021-08-18 11:04:13 +12:00
Jesse Hills
fbd9e87b51
Remove specified accuracy_decimals from total_daily_energy ( #2174 )
2021-08-18 10:32:19 +12:00
Jesse Hills
edb3b77916
Send dirty states when screen wakes up ( #2167 )
2021-08-18 10:22:00 +12:00
Chris Nussbaum
ebaa84617f
Total daily energy methods ( #2163 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-08-18 07:16:02 +12:00
Franck Nijhof
8eb18995cb
Add device class update to binary sensor ( #2170 )
2021-08-17 21:44:05 +12:00
Franck Nijhof
ebabf0e7d8
Add Gas device class to DSMR component ( #2169 )
2021-08-17 21:43:51 +12:00
Maurice Makaay
607e1f823d
Minor code cleanup in light components ( #2162 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-08-17 20:12:29 +12:00
Daniel Hyles
3b52a306cd
Add a dummy color temp ( #2161 )
2021-08-17 20:05:37 +12:00
Oxan van Leeuwen
0c370d5897
Initialize color temperature to value within range if possible ( #2168 )
2021-08-17 14:02:38 +12:00
Otto Winter
1be9bac3a9
Fix native API log level enum values ( #2151 )
2021-08-16 12:32:48 +12:00
Keith Burzinski
02b5a3efb8
Thermostat delayed fan mode fix ( #2158 )
2021-08-16 12:32:48 +12:00
puuu
bd457f64d8
let sensors announce its state_class via mqtt ( #2155 )
2021-08-16 12:32:48 +12:00
Oxan van Leeuwen
9efeea14f2
Always send all light state values in API ( #2150 )
2021-08-16 12:32:48 +12:00
Otto Winter
9b48ff5775
Fix native API log level enum values ( #2151 )
2021-08-16 11:57:50 +12:00
Keith Burzinski
117b58ebe6
Thermostat delayed fan mode fix ( #2158 )
2021-08-16 09:31:48 +12:00
puuu
303b699005
let sensors announce its state_class via mqtt ( #2155 )
2021-08-16 07:59:29 +12:00
Oxan van Leeuwen
9173da0416
Always send all light state values in API ( #2150 )
2021-08-16 07:40:34 +12:00
Jesse Hills
2735f96516
Fix bad merge again
2021-08-11 21:54:24 +12:00
Jesse Hills
6847645782
Fix bad merge conflict
2021-08-11 21:45:04 +12:00
Jesse Hills
c0f6af7213
Merge branch 'dev' into bump-1.21.0b1
2021-08-11 21:26:26 +12:00
Branimir Lambov
8c41fc2b1d
Support for the DKE screen version of LilyGo-TTGO-T5 V2.3 ( #1969 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 17:14:17 +12:00
Oxan van Leeuwen
46f17bea66
Modular light transformers ( #2124 )
2021-08-11 16:51:35 +12:00
Stefan Agner
11477dbc03
Fix format warning in Tuya component ( #1954 )
2021-08-11 16:50:05 +12:00
buxtronix
947c104eff
Support for AM43 BLE blind motors ( #1744 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: René Klomp <rene@klomp.ws>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Geoff Davis <geoff@geoffdavis.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: dentra <dentra@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Barry Loong <loongyh@users.noreply.github.com>
Co-authored-by: Sergey V. DUDANOV <sergey.dudanov@gmail.com>
Co-authored-by: Balazs Scheidler <bazsi77@gmail.com>
2021-08-11 16:07:10 +12:00
Stefan Agner
e5366dbbe7
Add deassert_rts_dtr option to force RTS/DTR low when using miniterm ( #2089 )
2021-08-11 07:55:36 +12:00
Andreas Hergert
d3375193a9
Feature pipsolar anh ( #1664 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 07:48:32 +12:00
Chris Nussbaum
6144ce1fe0
Break the Tuya set_datapoint_value method into separate methods per datapoint type ( #2059 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
Co-authored-by: Trevor North <trevor@freedisc.co.uk>
2021-08-11 07:44:31 +12:00
Jesse Hills
d258e06fd7
Add rgbct and color_temperature light platforms ( #2138 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-08-10 21:28:56 +12:00
Stephen Tierney
6a2f0f5143
Add support for PMSA003i ( #1501 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: steve <steve@Hackintosh.local>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 11:00:16 +02:00
WJCarpenter
183e2a8471
Support component tsl2591 ( #2131 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: WJCarpenter <bill@carpenter.org>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:48:06 +02:00
Oxan van Leeuwen
c6c2842bdb
Always abort on allocation when out-of-memory ( #2129 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:46:46 +02:00
Guillermo Ruffino
f26767b65e
Dsmr component ( #1881 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:32:16 +02:00
Keith Burzinski
98d32876b5
Thermostat enhancements 2 ( #2114 )
2021-08-10 10:16:44 +02:00
Trammell Hudson
e5d0f3c036
waveshare_epaper: add support for ttgo t5 b74 variant display ( #1869 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:09:46 +02:00
Adrián Panella
cc15aaacbb
RFC: status_led: allow to share single light ( #1974 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 09:55:34 +02:00
Tom Matheussen
b92311402a
Adds CGPR1 - Qingping Motion & Ambient light sensor support ( #1675 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 17:06:04 +12:00
Jesse Hills
93796491af
Allow entities to be disabled by default in HA ( #2113 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 13:45:31 +12:00
Oxan van Leeuwen
c038cf27a7
Don't discard cold/warm white brightness in constant brightness mode ( #2136 )
2021-08-10 13:30:29 +12:00
Adrián Panella
06bde559da
Add Dish Network protocol ( #2117 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 13:26:42 +12:00
Keith Burzinski
922f7167f5
Add new Toshiba AC unit protocol ( #1987 )
2021-08-10 13:25:11 +12:00
Keith Burzinski
90c0d3e12f
Add Toshiba AC generic IR remote protocol ( #2019 )
2021-08-10 13:21:10 +12:00
Oxan van Leeuwen
bf5f846fc6
Refactor clang-tidy script to use actual compiler flags and includes ( #2133 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-09 22:43:18 +02:00
Oxan van Leeuwen
926bcc71ae
Only compile protobuf dumping when very verbose logging is enabled ( #2139 )
2021-08-09 22:32:06 +02:00
Jesse Hills
ea4a458214
Removed unused arguments from rgbww code ( #2137 )
2021-08-09 16:44:52 +12:00
buxtronix
fe7af21c91
Anova fahrenheit support ( #2126 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-08-09 08:05:36 +12:00
Sourabh Jaiswal
29f72037fe
Added support for Hitachi AC424 remote type ( #2101 )
2021-08-08 10:59:52 -03:00
Oxan van Leeuwen
1d6b4bfcef
Don't stop effects if brightness goes to zero ( #2134 )
2021-08-07 23:24:47 +12:00
Jesse Hills
cb8a6f66fa
Add state classes to pvvx_mithermometer ( #2125 )
2021-08-05 12:05:36 +12:00
Oxan van Leeuwen
cb21c7c18d
Fix crash when using addressable_set with out-of-range indices ( #2120 )
2021-08-05 11:30:32 +12:00
Oxan van Leeuwen
0d104776bc
Various follow-up fixes to color mode changes ( #2118 )
2021-08-05 11:28:39 +12:00
Otto Winter
eeaba74553
Fix external components not refreshing with default or high refresh time ( #2122 )
2021-08-04 17:46:10 +02:00
brambo123
dd637582a4
Fix time.on_time triggering if time jumped back ( #1806 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-04 17:46:10 +02:00
Carlos Garcia Saura
b0d12aeea1
[duty_cycle] initialize two missing variables ( #2088 )
2021-08-04 17:46:09 +02:00
Paul Monigatti
a6fac2b175
Fix min/max keys in MQTT Number to match Home Assistant ( #2102 )
2021-08-04 17:46:09 +02:00
Guillermo Ruffino
5ce923ea90
fix diplay trigger missing base class ( #2099 )
2021-08-04 17:46:08 +02:00
Otto Winter
29f0508dc2
Fix PID climate breaks when restoring old modes ( #2086 )
2021-08-04 17:46:08 +02:00
Otto Winter
3ffa59f0cd
Fix climate restore schema changed resulting in invalid restore ( #2068 )
...
Co-authored-by: Stefan Agner <stefan@agner.ch>
2021-08-04 17:46:08 +02:00
WeekendWarrior1
790d6ef94c
Move configure_rmt() into setup() ( #2028 )
2021-08-04 17:46:08 +02:00
WeekendWarrior1
7828f48b9a
Correctly invert esp32 RMT TX ( #2022 )
2021-08-04 17:46:07 +02:00
Otto Winter
768c71830b
Fix external components not refreshing with default or high refresh time ( #2122 )
2021-08-04 17:33:17 +02:00
Oxan van Leeuwen
ceb0564ebf
Fix mixup between ColorMode and ColorCapability ( #2121 )
2021-08-04 12:32:42 +12:00
Oxan van Leeuwen
20f7eb7327
Add version argument to ESPDEPRECATED macro ( #2116 )
2021-08-04 10:43:01 +12:00
Oxan van Leeuwen
441d5bd44d
Migrate COLOR constants to Color class & disallow implicit conversions to Color ( #2093 )
...
Co-authored-by: Xo Wang <xo@geekshavefeelings.com>
2021-08-04 09:21:57 +12:00
brambo123
9fa19df2ff
Fix time.on_time triggering if time jumped back ( #1806 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-03 19:56:23 +02:00
Rob Gridley
39f64f597e
Add SM16703 to supported FastLED chipsets ( #1751 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-03 16:56:29 +02:00
Brett Profitt
160429eb24
Add support for Waveshare E-Paper 4.2" B V2 ( #1610 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-03 16:41:53 +02:00
Andreas Hergert
6516c64e67
Add min_save_interval to total_energy/integration for memory wear ( #1665 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-03 16:41:34 +02:00
Keith Burzinski
335210d788
Thermostat enhancements and code clean-up ( #2073 )
2021-08-02 11:08:24 +02:00
Jesse Hills
9b04e657db
Fix import ( #2108 )
2021-08-02 20:53:34 +12:00
Jesse Hills
f7311aa025
Dont force 0 state instead of min_power unless explicit config set ( #2107 )
2021-08-02 20:33:00 +12:00
John "Warthog9" Hawley
fb24e55c8d
pmsx003: add standard particle, particle counts ( #1694 )
2021-08-02 10:32:08 +02:00
Carlos Garcia Saura
b58ca46a46
[duty_cycle] initialize two missing variables ( #2088 )
2021-08-02 10:28:25 +02:00
Jesse Hills
76991cdcc4
Add select entities and implement template select ( #2067 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-02 20:00:51 +12:00
John K. Luebs
69c7cf783e
Fix missing include in light_traits.h ( #2105 )
2021-08-02 07:13:46 +12:00
Otto Winter
f751c3828e
Fix MQTT light include ( #2104 )
...
Fixes https://github.com/esphome/issues/issues/2285
2021-08-01 12:33:10 +02:00
Otto Winter
5c65f9f9ad
Convert sensor_schema to use kwargs ( #2094 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-01 12:21:32 +02:00
Eric Severance
81ae6709e4
Fix parity bit calculation for ESP8266SoftwareSerial ( #1873 )
2021-08-01 20:56:05 +12:00
Paul Monigatti
a8b90283d8
Fix min/max keys in MQTT Number to match Home Assistant ( #2102 )
2021-07-31 23:20:10 +12:00
Guillermo Ruffino
80076f935d
fix diplay trigger missing base class ( #2099 )
2021-07-30 16:55:26 +12:00
Jesse Hills
1d56f0b035
Set pulse meter total to use state class measurement and last reset type auto ( #2097 )
2021-07-30 11:00:10 +12:00
Otto Winter
34e8979d40
Convert more code to async-def syntax ( #2095 )
2021-07-30 10:54:10 +12:00
Jesse Hills
2966a62429
Set pulse meter total to use state class measurement and last reset type auto ( #2097 )
2021-07-30 10:53:33 +12:00
Oxan van Leeuwen
5983ccc55c
Color mode implementation ( #2012 )
2021-07-29 19:11:56 +02:00
Kodey Converse
de382b704c
Add device class support to MQTT cover ( #2092 )
2021-07-29 16:08:48 +02:00
Otto Winter
16dbbfabc6
Add demo integration ( #2085 )
2021-07-29 11:50:55 +02:00
Otto Winter
af8d04818d
Pull ESP32 Wifi fixes from arduino-esp32 ( #2069 )
2021-07-29 11:44:19 +02:00
Mike Meessen
ee19ef1aac
Add support for the HRXL MaxSonar WR series sensors ( #2020 )
2021-07-29 11:37:31 +02:00
Tyler Menezes
5e2d4e332a
Add T6615 ( #1170 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-29 11:24:36 +02:00
rnauber
c6c857dfff
Add support for the TLC5947 24-Channel, 12-Bit PWM LED Driver ( #2066 )
...
Co-authored-by: Richard Nauber <richard@nauber.dev>
2021-07-29 11:16:04 +02:00
Nicholas Peters
8dbac20f8b
Add SDP3x sensor ( #2064 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-29 10:57:52 +02:00
Jesse Hills
62f3039d82
Use sensor_schema for total_daily_energy ( #2090 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-29 19:51:17 +12:00
Jesse Hills
be4c718859
HLW8012 - Dump energy sensor config ( #2082 )
2021-07-29 19:51:17 +12:00
John K. Luebs
bfac6607d1
More Tuya MCU robustness ( #2080 )
2021-07-29 19:51:17 +12:00
Jesse Hills
513066ba52
Use sensor_schema for total_daily_energy ( #2090 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-29 19:46:15 +12:00
Jesse Hills
316777f757
HLW8012 - Dump energy sensor config ( #2082 )
2021-07-29 07:53:54 +12:00
Stefan Agner
246950159d
Bump ESPAsyncWebServer-esphome to 1.3.0 ( #2075 )
2021-07-28 21:24:10 +02:00
Otto Winter
31d6a54b06
Fix PID climate breaks when restoring old modes ( #2086 )
2021-07-28 21:23:41 +02:00
Oxan van Leeuwen
1652914d39
Make light.addressable_set color parameters behave as documented & consistent with elsewhere ( #2009 )
2021-07-28 19:49:43 +02:00
Otto Winter
618cfd9ec5
Add sensor monetary device_class ( #2083 )
2021-07-28 15:34:18 +02:00
Peter van Dijk
f97cfe9916
pm1006: add rx-only support ( #2038 )
2021-07-28 10:41:21 +02:00
John K. Luebs
5abbe385c5
More Tuya MCU robustness ( #2080 )
2021-07-28 14:01:15 +12:00
Otto Winter
71ded24fce
Fix MQTT climate custom fan modes without regular ones ( #2071 )
2021-07-27 09:43:05 +12:00
Chris Nussbaum
1e2a9e8348
Couple more updates for the Tuya component ( #2065 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-07-27 09:43:05 +12:00
buxtronix
64a3aa7092
Log warning about lack of support for Anova nano ( #2063 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-07-27 09:43:05 +12:00
carstenschroeder
fda8dd4ce3
Fixes new auto mode COOL and HEAT after #1994 ( #2053 )
2021-07-27 09:43:04 +12:00
Sergey V. DUDANOV
1efabd27d8
midea_ac: fix presets implementation ( #2054 )
2021-07-27 09:43:04 +12:00
Maurice Makaay
caa651e55b
Accept change as proposed by black. ( #2055 )
2021-07-27 09:43:04 +12:00
Otto Winter
b0a3891498
Fix MQTT climate custom fan modes without regular ones ( #2071 )
2021-07-27 07:46:13 +12:00
Otto Winter
2a9e3d84fd
Fix climate restore schema changed resulting in invalid restore ( #2068 )
...
Co-authored-by: Stefan Agner <stefan@agner.ch>
2021-07-26 15:19:50 +02:00
Oxan van Leeuwen
a3dcac62f9
Fix a bunch of typos ( #2058 )
...
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-26 14:48:57 +02:00
Chris Nussbaum
6b535b11f8
Couple more updates for the Tuya component ( #2065 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-07-26 21:39:03 +12:00
Stefan Agner
d9f09a7523
Initial ESP32-C3-DevKitM-1 board support ( #2062 )
...
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-07-26 11:10:56 +02:00
Stefan Agner
c2637a76f7
Print BLE 128-bit UUIDs according to spec ( #2061 )
...
Since the iterator integer counts the bytes backwards we need to
use the complement to 15.
2021-07-26 10:49:38 +02:00
buxtronix
237edd75d1
Log warning about lack of support for Anova nano ( #2063 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-07-26 10:41:54 +02:00
WeekendWarrior1
a34d5e3901
Move configure_rmt() into setup() ( #2028 )
2021-07-26 09:32:08 +02:00
WeekendWarrior1
1dd43a75f2
Correctly invert esp32 RMT TX ( #2022 )
2021-07-26 09:20:02 +02:00
Stefan Agner
66cdb761dc
Fix minor build issues with Arduino ESP32 2.0.0-rc1 ( #2057 )
2021-07-24 21:55:25 +12:00
Stefan Agner
f0d9ad6a4e
Add TAG to all compile units ( #2060 )
...
When using static TAG is only valid in the current compile unit. For
some reason it seems that the current ESP8266/ESP32 compiler use the
instance from ble.cpp, but it seems that this causes issues with newer
compiler leading to compile time errors like this:
In file included from /root/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-log.h:164,
from /root/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal.h:71,
from /root/.platformio/packages/framework-arduinoespressif32/cores/esp32/Arduino.h:36,
from src/esphome/core/esphal.h:3,
from src/esphome/core/helpers.h:10,
from src/esphome/components/esp32_ble/ble_uuid.h:3,
from src/esphome/components/esp32_ble/ble_advertising.cpp:5:
src/esphome/components/esp32_ble/ble_advertising.cpp: In member function 'void esphome::esp32_ble::BLEAdvertising::start()':
src/esphome/components/esp32_ble/ble_advertising.cpp:64:14: error: 'TAG' was not declared in this scope
ESP_LOGE(TAG, "esp_ble_gap_config_adv_data failed (Advertising): %d", err);
^~~
2021-07-24 03:53:59 +12:00
carstenschroeder
03e317d052
Fixes new auto mode COOL and HEAT after #1994 ( #2053 )
2021-07-22 14:39:57 +02:00
Sergey V. DUDANOV
ba461e51a8
midea_ac: fix presets implementation ( #2054 )
2021-07-22 14:39:21 +02:00
Maurice Makaay
80949521b6
Accept change as proposed by black. ( #2055 )
2021-07-22 14:37:42 +02:00
Sourabh Jaiswal
acbb8e9fd0
Added support for Selec Energy Meter ( #1993 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:31:28 +12:00
Pasi Suominen
90394a50df
Added support for pvvx_mithermometer sensor ( #1546 )
...
Co-authored-by: Pasi Suominen <pasiz@pasizdesk.pasiz.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:21:08 +12:00
Keith Burzinski
0a32321c85
Thermostat fixes+updates 1 ( #2032 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-22 09:09:31 +12:00
Jesse Hills
bd74ed4bc0
Merge branch 'beta' into bump-1.20.0
2021-07-22 07:55:49 +12:00
Sean Vig
837930234f
Remove superfluous polling on ADS1115 ( #2015 )
2021-07-21 10:52:48 +12:00
Jesse Hills
e19aa3bbe0
Adding last_reset_type to sensors that should support it. ( #2039 )
2021-07-21 10:52:48 +12:00
Oxan van Leeuwen
35b5c1ed56
Fix white value transition for addressable lights ( #2045 )
2021-07-21 10:52:48 +12:00
Sean Vig
3e65e6c69a
Remove superfluous polling on ADS1115 ( #2015 )
2021-07-21 09:35:45 +12:00
Jesse Hills
3b3297d269
Adding last_reset_type to sensors that should support it. ( #2039 )
2021-07-21 09:20:20 +12:00
Oxan van Leeuwen
fc0deb642a
Fix white value transition for addressable lights ( #2045 )
2021-07-21 08:42:03 +12:00
Stefan Agner
9f2b2f51ff
Esp32 c3 support ( #2035 )
2021-07-20 11:12:22 +02:00
Otto Winter
e5afb1c4ea
ESP32 ADC use esp-idf ( #2024 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-20 17:09:57 +12:00
Sean Vig
73ead5f328
Correct ADS1115 handling of multiple sensors in continuous mode ( #2016 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-20 17:09:57 +12:00
Sergey V. DUDANOV
e25935ef21
midea_ac: Fix turbo mode. Preset BOOST. ( #2029 )
2021-07-20 17:09:57 +12:00
Jesse Hills
c7a52c3894
Add restore_value to template number ( #2041 )
2021-07-20 17:09:57 +12:00
Otto Winter
01a4b4e82f
ESP32 ADC use esp-idf ( #2024 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-20 17:05:56 +12:00
Sean Vig
766866197b
Correct ADS1115 handling of multiple sensors in continuous mode ( #2016 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-20 17:05:25 +12:00
Sergey V. DUDANOV
d2ed3b9bec
midea_ac: Fix turbo mode. Preset BOOST. ( #2029 )
2021-07-20 16:26:07 +12:00
Jesse Hills
99d2db42cd
Add restore_value to template number ( #2041 )
2021-07-20 15:40:42 +12:00
Jesse Hills
7619507e6c
Convert Arduino boolean to bool ( #2042 )
2021-07-20 15:31:54 +12:00
Jesse Hills
98855e4123
Number and Template Number updates ( #2036 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-07-20 10:28:22 +12:00
Jesse Hills
71d9d64a02
Number and Template Number updates ( #2036 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-07-20 08:22:49 +12:00
Otto Winter
f1e3ff2ed2
Improve external components error messages ( #2026 )
2021-07-19 08:28:58 +12:00
Sean Vig
3715ba030b
Fix ethernet component hostname handling ( #2010 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-19 08:25:08 +12:00
Otto Winter
06912b492f
Improve external components error messages ( #2026 )
2021-07-16 10:23:08 +02:00
Sean Vig
45d368e3a1
Always tick mdns in ethernet component ( #2018 )
2021-07-15 16:12:48 +12:00
Sean Vig
628a94bad3
Fix ethernet component hostname handling ( #2010 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-15 15:45:41 +12:00
SenexCrenshaw
4dbf1c521e
Nextion upload and sensors ( #1464 )
...
Co-authored-by: Senex Crenshaw <senexcrenshaw@gmail.com>
2021-07-15 13:55:58 +12:00
SenexCrenshaw
0651716b96
Nextion upload and sensors ( #1464 )
...
Co-authored-by: Senex Crenshaw <senexcrenshaw@gmail.com>
2021-07-15 12:51:15 +12:00
St4n
c399905675
[Teleinfo] do not stop parsing frame if there is only a CRC error ( #1999 )
...
Co-authored-by: Stephane Angot <s.angot@meetic-corp.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-14 21:21:39 +12:00
Stefan Agner
5cb0c11feb
Introduce clamp as a template function ( #1953 )
2021-07-14 17:08:18 +12:00
WeekendWarrior1
08b67e7aea
catch 0.0 in float set_level pre-adjustment ( #2013 )
2021-07-14 14:43:30 +12:00
Jesse Hills
07ae8ec553
Remove a whole bunch of deprecated/removed stuff ( #1981 )
2021-07-14 14:42:16 +12:00
Sourabh Jaiswal
04c3a43c17
Added support for havells_solar sensor ( #1988 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-14 13:05:51 +12:00
Oxan van Leeuwen
fb8ec79a52
Color brightness fixes ( #2008 )
2021-07-13 12:28:29 +12:00
Huub Eikens
7dd16df846
Sgp30 sensor improvements ( #1510 )
...
Co-authored-by: Umberto73 <huub@eikens.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-07-13 09:21:54 +12:00
Otto Winter
551e9c6111
Bang bang climate new mode meanings ( #1996 )
2021-07-12 22:56:55 +02:00
Mikko Tervala
cc9f0b3f47
Add support for IBS-TH1 External Sensor ( #1983 )
2021-07-13 08:55:53 +12:00
Jesse Hills
dd37a4e04c
Add Number entities (from Home Assistant) ( #1971 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-07-13 07:20:12 +12:00
Oxan van Leeuwen
1f5c79bd17
Fix deprecation message for old climate swing mode methods ( #2003 )
2021-07-11 16:51:24 +12:00
Maurice Makaay
623570a117
Add state callback to ota component ( #1816 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-07-11 07:52:19 +12:00
carstenschroeder
cdbc146e5d
Climate modes COOL and HEAT are auto modes ( #1994 )
2021-07-10 11:37:55 +02:00
Otto Winter
7ae611256a
Improve climate mode code docs ( #1995 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-10 11:23:04 +02:00
Michael Gorven
294ba1fca7
Support custom fan modes in mqtt_climate ( #1989 )
...
Co-authored-by: Michael Gorven <michael@gorven.za.net>
2021-07-09 23:25:27 +02:00
Jesse Hills
be61b38a2c
Allow WiFi AP to use device name ( #1990 )
2021-07-09 00:39:37 +12:00
Oxan van Leeuwen
f9797825ad
Change color model to fix white channel issues ( #1895 )
2021-07-08 21:37:47 +12:00
Jesse Hills
062cedc200
remote_receiver: use config parent receiver for registering dumpers ( #1980 )
2021-07-06 10:15:29 +12:00
WeekendWarrior1
79b9d0579d
Add stepper.set_acceleration and stepper.set_deceleration to stepper component ( #1977 )
2021-07-05 13:22:43 +12:00
buxtronix
ab31117bf3
Anova ble component ( #1752 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:59:12 +12:00
Adrián Panella
d31040f5d8
hlw8012: fix constants for BL0937 ( #1973 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:09:09 +12:00
Oxan van Leeuwen
4c4099966a
Fix invalid escape sequences in regex ( #1814 )
2021-07-05 10:04:18 +12:00
Paul Doidge
86ac7f3a59
Time Based Cover: Fixed apparent race condition on ESP32 chips ( #1984 )
2021-07-05 07:39:18 +12:00
Trevor North
9e400a7857
Fix tuya fan speed send ( #1978 )
2021-07-04 23:47:22 +12:00
definitio
36861595f1
Add device_class support for MQTT integration ( #1832 )
2021-07-01 15:36:01 +02:00
Frederik Gladhorn
d604321f37
Simplify initializing glyph_data ( #1970 )
...
Make it easier to read the initialization with zeros, no loop required.
2021-06-30 20:36:48 +02:00
bazuchan
964ab65497
Climate component for Ballu air conditioners with remote model YKR-K/002E ( #1939 )
2021-06-28 16:26:30 -03:00
Jesse Hills
3b940b1c04
Set is_valid to true straight away when min_length is 0 ( #1960 )
2021-06-25 07:09:07 +12:00
Otto Winter
1d8c170f48
Add climate preset NONE again ( #1951 )
2021-06-24 12:49:45 +12:00
Otto Winter
6009c7edb4
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-24 12:49:44 +12:00
Otto Winter
e3f36c033e
API raise minor version for climate changes ( #1947 )
2021-06-24 12:49:44 +12:00
Otto Winter
d4eb0f1655
Rework climate traits ( #1941 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-24 12:49:36 +12:00
Oxan van Leeuwen
7051f897bc
Validate color temperature values for RGBWW/CWWW lights ( #1957 )
...
Check if the color temperature of the cold white channel is colder (less) than
the warm white channel.
2021-06-24 00:07:27 +02:00
Otto Winter
d0859a7d33
Add climate preset NONE again ( #1951 )
2021-06-23 20:25:19 +02:00
Otto Winter
bfca3f242a
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-22 10:53:10 +02:00
Stefan Agner
3dfff2930a
Improve DHT read timings ( #1901 )
...
Make sure that the initial rising edge is properly detected even if
timing is somewhat off.
Set MCU start signal to 1ms for AM2302.
2021-06-22 10:07:14 +02:00
Otto Winter
c811141a4f
API raise minor version for climate changes ( #1947 )
2021-06-21 22:02:18 +02:00
Otto Winter
871c0ee2a5
Rework climate traits ( #1941 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-21 21:17:01 +02:00
Jesse Hills
969834e037
Fix bad climate control enum ( #1942 )
2021-06-21 14:40:05 +12:00
Jesse Hills
d73a44c504
Allow wifi setup to proceed when there is no sta or ap ( #1931 )
2021-06-21 14:40:05 +12:00
Sergey V. DUDANOV
8aec092ab6
Fix midea_ac query frame ( #1940 )
2021-06-21 14:40:05 +12:00
Chris Nussbaum
4fa959ba45
Don't send Tuya commands while currently receiving a message ( #1886 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-06-21 14:40:05 +12:00
Jesse Hills
b6011b9353
Fix bad climate control enum ( #1942 )
2021-06-21 14:17:38 +12:00
Jesse Hills
40a5005d94
Allow wifi setup to proceed when there is no sta or ap ( #1931 )
2021-06-21 09:00:16 +12:00
Sergey V. DUDANOV
c5eba21ff6
Fix midea_ac query frame ( #1940 )
2021-06-21 08:59:12 +12:00
Jesse Hills
4891cfef56
Add data sizes to tuya log message ( #1938 )
2021-06-18 15:50:56 +12:00
Chris Nussbaum
4395664547
Don't send Tuya commands while currently receiving a message ( #1886 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-06-18 14:58:39 +12:00
Keith Burzinski
04d926af39
Add variable bit width for Samsung protocol ( #1927 )
2021-06-18 13:54:46 +12:00
Jesse Hills
dd875e7529
Replace CLIMATE_MODE_AUTO with CLIMATE_MODE_HEAT_COOL in most cases ( #1933 )
2021-06-18 11:52:02 +12:00
Otto Winter
f1dcf0f0b8
Improve config final validation ( #1917 )
2021-06-18 11:52:02 +12:00
Sergey V. DUDANOV
a045d001bf
Fix: midea_ac: fixed query status frame ( #1922 )
2021-06-18 11:52:01 +12:00
Jesse Hills
dca1c0f160
Replace CLIMATE_MODE_AUTO with CLIMATE_MODE_HEAT_COOL in most cases ( #1933 )
2021-06-18 11:48:40 +12:00
Otto Winter
2419bc3678
Improve config final validation ( #1917 )
2021-06-18 07:54:14 +12:00
Sergey V. DUDANOV
c19b3ecd43
Fix: midea_ac: fixed query status frame ( #1922 )
2021-06-18 07:39:13 +12:00
Jesse Hills
a5383fd208
Shorten the ble name to prevent crash with long device names ( #1920 )
2021-06-16 13:51:31 +12:00
Jesse Hills
5591832b50
Shorten the ble name to prevent crash with long device names ( #1920 )
2021-06-16 13:49:06 +12:00
Jesse Hills
106f0d611f
Validate that either networks, ap, or improv is set up ( #1910 )
2021-06-15 20:26:52 +12:00
Jesse Hills
d826416684
Allow no networks or AP to be set. ( #1908 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-15 20:26:52 +12:00
Stefan Agner
a80f9ed336
Support ESP8266 Arduino 3.0.0 ( #1897 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-06-15 08:50:58 +02:00
Otto Winter
92bbedfa5a
Fix #1908 mutating input parameter
2021-06-15 08:48:18 +02:00
Jesse Hills
86710ed483
Validate that either networks, ap, or improv is set up ( #1910 )
2021-06-15 13:16:43 +12:00
Jesse Hills
da7eb9ac90
Allow no networks or AP to be set. ( #1908 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2021-06-15 11:05:10 +12:00
Oxan van Leeuwen
93f8ee7e60
Fix non-const global ( #1907 )
2021-06-15 09:12:06 +12:00
Oxan van Leeuwen
0efc1f06f2
Split files in light component ( #1893 )
2021-06-14 18:01:56 +02:00
Jesse Hills
75b524ddc4
Fix formatting from cherry-pick conflict
2021-06-12 11:07:58 +12:00
Jesse Hills
575badc690
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 11:02:59 +12:00
Jesse Hills
4b91cfb7f9
Ensure wifi is in at least station mode before starting improv ( #1899 )
2021-06-12 11:01:54 +12:00
Jesse Hills
5a2cfa2798
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 08:31:15 +12:00
Jesse Hills
eb24da7c82
Ensure wifi is in at least station mode before starting improv ( #1899 )
2021-06-11 23:28:00 +12:00
Oxan van Leeuwen
f93e261d75
Convert st7735.cpp to use Unix line separators ( #1894 )
2021-06-11 08:33:12 +12:00
Stefan Agner
501f88ca86
Avoid non-const globals and enable clang-tidy check ( #1892 )
2021-06-11 08:19:44 +12:00
Otto Winter
360effcb72
Activate some clang-tidy checks ( #1884 )
2021-06-10 13:04:40 +02:00
Otto Winter
eb9bd69405
Configure clang-format for consistent pointer alignment ( #1890 )
2021-06-10 12:55:20 +02:00
Geoff Davis
8b737aabd9
Add support for waveshare_epaper 1.54v2 ( #1843 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-10 17:17:52 +12:00
Jesse Hills
0db4815f3d
BLE loop use ( #1882 )
2021-06-10 17:17:52 +12:00
Oxan van Leeuwen
139db58a66
Simplify LightCall validation ( #1874 )
2021-06-10 17:17:52 +12:00
Geoff Davis
d23376b81e
Add support for waveshare_epaper 1.54v2 ( #1843 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-10 14:05:27 +12:00
Jesse Hills
99d90845b5
BLE loop use ( #1882 )
2021-06-10 14:04:39 +12:00
Oxan van Leeuwen
ea0127e42b
Simplify LightCall validation ( #1874 )
2021-06-09 17:01:05 +02:00
René Klomp
635916737b
Update total_pulses_ at every detected pulse ( #1875 )
2021-06-09 16:48:51 +12:00
Jesse Hills
5cf18235e3
Allow setting creator project name and version into code ( #1872 )
2021-06-09 13:04:00 +12:00
Stefan Agner
b80f3fdec9
Fix Clang 11 finds ( #1880 )
2021-06-09 08:47:43 +12:00
Jesse Hills
0426be9280
Fixes for BLE/improv ( #1878 )
2021-06-09 08:45:51 +12:00
Stefan Agner
13fe9e83fa
Use Clang 11 ( #1846 )
2021-06-08 22:16:17 +02:00
Jesse Hills
a70a205ace
Improv - BLE WiFi provisioning ( #1807 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-06-08 11:56:21 +12:00
Stefan Agner
18a8c727fa
Fix SCD30 configuration on ESP32 ( #1830 )
2021-06-05 20:56:54 +12:00
Stefan Agner
80ad784a4e
Avoid unnecessary waits to stabilize the VOC algorithm ( #1834 )
2021-06-05 20:52:16 +12:00
Lumpusz
ebadaa9660
Add preset, custom_preset and custom_fan_mode support to climate ( #1471 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-04 22:04:54 +12:00
Samuel Sieb
7bc51582f0
make crc16 function accessible ( #1857 )
2021-06-03 16:13:42 +12:00
Franck Nijhof
11fb54c74e
Add support for Sensor state class ( #1835 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 13:49:56 +12:00
Stefan Rado
913ac8b7e8
Support raw datapoints for tuya components ( #1669 )
2021-06-03 13:10:29 +12:00
foxsam21
2b9350ce76
Added vol +/- control to dfplayer ( #1856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 10:12:23 +12:00
Trevor North
c5c24c1989
Tuya improvements ( #1491 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 21:31:56 +12:00
Ryan Mounce
c3938d04f3
Support Tuya light color temperature control ( #1412 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 09:32:16 +12:00
David Kiliani
f968713be8
Add optional lambda to BLESensor for raw data parsing ( #1851 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 21:46:54 +12:00
Jesse Hills
7b11284008
Fix ble client esp_gatt_if comparison ( #1852 )
2021-06-01 21:12:41 +12:00
zaluthar
f39c0d52ee
Added support for Xiaomi CGDK2 ( #1451 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 20:26:38 +12:00
buxtronix
a3756a9600
Copy missing BLE client characteristic read data ( #1818 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-06-01 19:56:05 +12:00
0hax
afa436fe8f
teleinfo: use text_sensor and sensor. ( #1403 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-06-01 13:32:09 +12:00
Roberto Wagner
48b5ea9e59
Update fingerprint count after enroll ( #1811 )
2021-06-01 12:22:09 +12:00
Maurice Makaay
56974153f1
I2c raw cmds with multiplexer ( #1817 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-06-01 10:36:25 +12:00
Jesse Hills
9a2cd71571
Don't check uart settings for modbus ( #1850 )
2021-06-01 09:57:03 +12:00
Stefan Agner
d1c6368283
Use built-in validation for altitude ( #1831 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 07:40:57 +12:00
Adrián Panella
5c3268b8d4
Rf Bridge: add bucket sniffing and beep functionality ( #1819 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 07:24:22 +12:00
Oxan van Leeuwen
25af5ab7c6
Drop 128x160 ESP-32 camera resolution ( #1813 )
2021-05-31 22:27:41 +12:00
Andrew Zaborowski
4d586b1446
Add CS5460A power-meter component ( #1474 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:07:33 +12:00
polyfaces
bb759d52c8
Add support for SDMXXX energy meters ( #1260 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:05:49 +12:00
testbughub
9a2cf05c5f
Added bottom segment to digit 9 ( #1847 )
2021-05-30 20:54:26 -03:00
Guillermo Ruffino
c79d700d03
Add validate to components ( #1631 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 10:06:45 +12:00
Guillermo Ruffino
387f249363
fix dallas pin validation ( #1692 )
2021-05-28 13:15:52 +12:00
Otto Winter
e3c27a483c
Update sensor device classes from HA ( #1825 )
2021-05-24 21:45:51 +02:00
Otto Winter
a33bb32874
Convert components to async-def syntax ( #1823 )
...
* Convert components to async-def syntax
* Remove stray @coroutine
* Manual part
* Convert complexer components code to async-def
* Manual cleanup
* More manual cleanup
2021-05-24 21:45:31 +02:00
Otto Winter
2376a2c941
Convert components to async-def syntax ( #1821 )
2021-05-24 10:58:29 +02:00
Jim Bauwens
b11d5f6799
Allow segments in a light partition to be reversed ( #1484 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:57:48 +12:00
Stanislav Meduna
072dce340e
Add the on_page_change display trigger ( #1687 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:56:04 +12:00
Trevor North
cccb1a2c9e
BME680 BSEC: Allow sample rate overrides for T/P/H sensors ( #1710 )
2021-05-24 08:27:19 +12:00
Stanislav Meduna
063d9c47a4
Refactor font creation to save stack ( #1707 )
2021-05-24 08:24:54 +12:00
Franck Nijhof
0ce57e5a39
Light & Switch Inverted Restore mode ( #1810 )
2021-05-24 08:20:11 +12:00
Otto Winter
aebad04c0b
Convert core components to async-def coroutine syntax ( #1658 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-23 22:10:30 +02:00
Anthony Uk
514d11d46f
tm1637 - support 6 character displays ( #1803 )
2021-05-21 20:04:25 -03:00
Anthony Uk
96e46db272
Added fan triggers on_turn_on and on_turn_off ( #1726 )
2021-05-19 16:12:43 +12:00
Stefan Agner
76f78877f6
Use latest version of the NeoPixelBus-esphome library ( #1701 )
2021-05-19 14:55:49 +12:00
Jesse Hills
4ffa68b773
Merge branch 'master' into dev
2021-05-19 14:02:04 +12:00
André Klitzing
dce9d59dfe
Do not use Serial2 for ESP32C3, too ( #1798 )
...
src/esphome/components/logger/logger.cpp: In member function 'void esphome::logger::Logger::pre_setup()':
src/esphome/components/logger/logger.cpp:142:29: error: 'Serial2' was not declared in this scope
this->hw_serial_ = &Serial2;
2021-05-18 19:16:51 +12:00
romerod
d3e291b442
Add on_tag_removed trigger to pn532 ( #1436 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-18 11:54:09 +12:00
Otto Winter
d4686c0fb1
Introduce new async-def coroutine syntax ( #1657 )
2021-05-17 17:14:15 +12:00
Jesse Hills
030c87d142
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-17 13:53:35 +12:00
Jesse Hills
95ed3e9d46
Revert "Added bottom segment to digit 9 ( #1787 )" ( #1791 )
...
This reverts commit 9ecead2645
2021-05-17 13:22:49 +12:00
Stanislav Meduna
d0eaebe19f
Add support for the XPT2046 touchscreen controller ( #1542 )
2021-05-17 13:03:58 +12:00
testbughub
9ecead2645
Added bottom segment to digit 9 ( #1787 )
2021-05-17 11:38:49 +12:00
Stefan Agner
98166dfa66
Bump Arduino SDK for ESP32 to 1.0.6 ( #1789 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:38:26 +12:00
Franck Nijhof
5645be4e0f
Add attribute support to Home Assistant sensors ( #1770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:16:22 +12:00
Jesse Hills
9a7a205510
Generate protobuf code closer to formatted files ( #1790 )
2021-05-17 10:54:17 +12:00
Jesse Hills
7e3b8fd346
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-15 17:02:52 +12:00
Guillermo Ruffino
3d6dcc9eee
Add more json schema generation features ( #1690 )
...
* some enums
* extract enums, light effects remote_receiver etc
* more pins schema
* update to core changes
2021-05-14 20:35:39 -03:00
Jesse Hills
4f6982fbc5
Add action to set total pulses on pulse_meter ( #1757 )
2021-05-14 20:06:31 +12:00
Stanislav Meduna
00c144daeb
Autorepeat filter for the binary sensors ( #1681 )
...
* add the autorepeat filter
* add a test for the autorepeat filter
* make no timing equivalent to a single default one
2021-05-13 17:36:53 -03:00
BoukeHaarsma23
9e7acd6f75
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Yuval Aboulafia
7d9c043f1d
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Guillermo Ruffino
bafbeefb37
Switch to esphome/AsyncTCP-esphome v1.2.2. ( #1762 )
2021-05-13 07:17:13 +12:00
BoukeHaarsma23
54660300e9
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:14:01 +12:00
onde2rock
5dc40049be
Add function to set SDS011 sensor in sleeping state ( #1416 )
...
Co-authored-by: aurelien <aurelien.antunes@gmail.com>
2021-05-12 16:38:29 +12:00
RubyBailey
1e46b4073f
Mitsubishi Heat Pump - Fixed default transmit_state to be generic instead of for a specific type of heat pump ( #1414 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 16:07:28 +12:00
krunkel
29fc4af0fc
Add delay to aht10.cpp ( #1498 )
2021-05-12 15:50:26 +12:00
Yuval Aboulafia
cdc9c99d40
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 10:16:59 +12:00
André Klitzing
b966e58f9e
Fix build issues for idf 4.2 (Support ESP32-S2) ( #1433 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-05-12 09:57:39 +12:00
André Klitzing
a546677b08
Fix build issues for idf 4.2 (Support ESP32-S2) ( #1433 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-05-12 08:31:40 +12:00
Jesse Hills
5c3af1d3f6
Allow duration for deep_sleep.enter to be templateable ( #1765 )
2021-05-11 12:36:14 -03:00
Maurice Makaay
7665a220a0
Fix error when using %% in printf format. ( #1713 )
...
For printf formatting, a check is done to see if the number of
arguments matches the number of printf formatting placeholders.
The escape code `%%` that is used for representing a literal `%`
is also counted as a placeholder, but no argument will be provided
for that one.
This makes it impossible to use something like `("%f%%", percentage)`
in the code. In such case, one gets the error:
`Found 2 printf-patterns (%f, %%), but 1 args were given!`
This commit fixes this behavior by omitting the `%%` from the matches.
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-05-11 12:15:29 -03:00
Guillermo Ruffino
4250af4dd9
Switch to esphome/AsyncTCP-esphome v1.2.2. ( #1762 )
2021-05-11 12:05:49 -03:00
Jesse Hills
44562dbef1
Merge branch 'dev' into bump-1.18.0b1
2021-05-10 07:54:06 +12:00
Otto Winter
229bf719a2
Implement external custom components installing from YAML ( #1630 )
...
* Move components import loading to importlib MetaPathFinder and importlib.resources
* Add external_components component
* Fix
* Fix
* fix cv.url return
* fix validate shorthand git
* implement git refresh
* Use finders from sys.path_hooks instead of looking for __init__.py
* use github:// schema
* error handling
* add test
* fix handling git output
* revert file check handling
* fix test
* allow full component path be specified for local
* fix test
* fix path handling
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-07 15:02:17 -03:00
Farzad E
2225594ee8
Added an option to disable mDNS ( #1716 )
...
* Added an option to disable mDNS
* Fixed linter issues
* Moved the enable_mdns option to WiFi and Ethernet components
* extracted common method for add mdns library
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-06 12:31:42 -03:00
mbo18
f7232b199a
Change wifi signal strength unit to dBm ( #1734 )
2021-05-05 20:13:14 +12:00
Ryan Mounce
ffc6fe9ca0
Add support for controlling Tuya fan direction ( #1409 )
2021-05-05 16:24:31 +12:00
Alex Konradi
06b8e4df27
Call Stepper::should_step_ every loop iteration ( #1373 )
2021-05-05 14:32:15 +12:00
d-two
28ed42d879
Add Hyperion Support ( #1339 )
2021-05-05 14:09:38 +12:00
0x0a11c0de
98f0d75180
Fix #1940 : Implement speed_count in TuyaFan ( #1654 )
...
Co-authored-by: Frank Riley <fhriley@gmail.com>
2021-05-04 14:11:24 +12:00
buxtronix
dd4fb85170
Ble client fixes ( #1739 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-05-04 08:51:03 +12:00
buxtronix
02aa75f68c
BLE client support on ESP32 ( #1177 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-03 11:10:50 +12:00
Alex
07db9319ad
Swap fan and swing fields for Fujitu ACs ( #1635 )
2021-04-30 11:53:44 +12:00
Wojtek Strzalka
4ae4a4ee88
Support for TOF10120 distance sensor ( #1375 )
2021-04-29 11:49:46 +12:00
Guillermo Ruffino
a7c648b60b
RC522 fixes ( #1479 )
2021-04-29 10:50:24 +12:00
Barry Loong
4d7c1ae143
Add Grow Fingerprint Reader ( #1356 )
2021-04-29 10:08:27 +12:00
elyorkhakimov
cc6d1e85cc
Addition of forward and reverse active energy counters to ATM90E32 sensor component ( #1271 )
...
Co-authored-by: Elyor Khakimov <elyorkhakimov@forwardnetworks.com>
2021-04-29 07:15:50 +12:00
Stephen Tierney
7fb116d87d
Add support for SHT4X ( #1512 )
2021-04-28 20:22:46 +12:00
Christian Ferbar
cc43e01e34
Add monochromatic effects: Pulse, Random ( #1616 )
2021-04-28 15:05:04 +12:00
Guillermo Ruffino
bb3d0706d3
Revert "Bump AsyncTCP-esphome to 1.2.1. ( #1693 )" ( #1709 )
...
This reverts commit aed6f2b1ea
2021-04-21 10:33:59 -03:00
Richard Klingler
820dedbcd2
Added / to default glyphs ( #1691 )
...
Co-authored-by: Charlie Root <klingler@blender.klingler.net>
2021-04-21 12:10:45 +02:00
Maurice Makaay
aed6f2b1ea
Bump AsyncTCP-esphome to 1.2.1. ( #1693 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-04-19 20:15:37 -03:00
John Coggeshall
bf1885af3f
Implementing the remainder of GPS data for the GPS component. ( #1676 )
2021-04-11 19:15:23 +02:00
Otto Winter
d8e4f5d56b
Sensor Average Filter Fix Floating Pointer Error Accumulating ( #1624 )
2021-04-09 10:27:18 +02:00
SenexCrenshaw
2033ac34e5
Sgp40 ( #1513 )
...
* Start of SGP40 dev
* Clean up
* Initial Commit
* VOC is working
* Fixed up sensor config
* Lint Fixes
Added in save/restore baseline
Noted original repo in header
* Lint Fixes
Added to test
* Lint Fixes
* Added additional check on restoring
* Removed double check
* Changed defines to static const double
* Changed defines to const
Do not send voc index until sensor stabilizes
* Fixed sensor stabilization message
* Fixup according to PR
* samples_read increment fix
* Fixed missing device class
* Choose a SENSOR device class
* Moved some sensors for tests
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-08 22:40:19 -03:00
SenexCrenshaw
a39bb7b92f
Support custom build_flags for bme680_bsec ( #1678 )
2021-04-08 17:06:54 +02:00
Dan Gentry
b53f9f2a81
Daylight Saving Time spelling fix ( #1677 )
2021-04-08 17:04:40 +02:00
Otto Winter
586e36906d
Fix sensor.sensor_schema interface changed ( #1659 )
2021-04-08 14:37:55 +02:00
Gareth Cooper
e6f8e73705
Receive long MQTT payload ( #1590 )
2021-04-08 14:26:34 +02:00
Guillermo Ruffino
2e50e1f506
Fix servo detach chopped PWM ( #1650 )
2021-04-08 14:22:30 +02:00
Anthony Uk
76a6c39f25
mqtt_client: Added MQTTClientComponent::unsubscribe() ( #1672 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-04-08 14:21:42 +02:00
rbaron
bf01c22e1f
Adds support for b-parasite soil moisture sensor ( #1666 )
2021-04-08 13:59:30 +02:00
Otto Winter
7964b724ed
Rewrite sun component calculations ( #1661 )
2021-04-07 12:16:36 +02:00
Vegetto
3ecae3f16f
fixes #858 - esphome crashes with neolightbus and RMT ( #1667 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-04-06 14:31:38 +02:00
Anthony Uk
5c359856ff
Fixed CustomComponentConstructor::get_component() ( #1653 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-06 13:50:31 +02:00
Trevor North
2d618768d5
Add BME680 via BSEC integration ( #1313 )
2021-04-06 12:19:56 +02:00
Stanislav Meduna
808e3be324
Add the display.is_displaying_page condition ( #1646 )
...
* display: add the display.is_displaying_page condition
* use maybe_simple_value for page_id
* add test
2021-04-02 23:00:41 -03:00
Andreas Hergert
9e23987db8
Add I2CMultiplexer in generel and the TCA9548A in special ( #1410 )
...
* Added I2CMultiplexer in generel and the TCA9548A in special
* cleanup
* tidy
* tidy
* tidy
* tidy
* Update CODEOWNERS
* Update CODEOWNERS
* added CODEOWNERS
* Fix CODEOWNERS
* protected function
* fixed scan
* fixed style
* added to test1.yaml
* Update esphome/components/tca9548a/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* added define statements for I2C Multiplexer
* fix
* try to tidy
* bug fix
* tidy
* override fix
* only change channel if different
* tidy
* added test
* testfix
* added defines
* tidy
* fix dep
* like recommended
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-29 16:50:30 -03:00
Guillermo Ruffino
ad76312f66
fix servo not reattaching with same target ( #1649 )
2021-03-28 22:35:39 -03:00
Diego Elio Pettenò
a6255c31fe
Add optional bindkey support for CGG1. ( #1407 )
2021-03-26 07:33:06 +13:00
buxtronix
46356cbc4a
Fix BLE UUID matching ( #1637 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-03-23 18:21:04 +13:00
Jesse Hills
4d340dc029
Merge branch 'dev' into bump-1.17.0b1
2021-03-22 20:08:57 +13:00
Jesse Hills
af3273d930
Add trigger for http actions to receive the status code ( #1599 )
2021-03-22 16:26:10 +13:00
Niccolò Maggioni
8f1eb77e05
Background calibration & ABC commands for SenseAir S8 ( #1623 )
2021-03-22 12:59:41 +13:00
matikij
91898cb814
Add 2.13in-ttgo-b1 waveshare epaper module. ( #1326 )
2021-03-20 20:32:46 +13:00
Keith Burzinski
818a7f1c78
Declare Color objects in main.cpp ( #1395 )
2021-03-19 23:40:05 +13:00
Jesse Hills
dedf343bd5
Fix pulse-meter with device_class and black ( #1621 )
2021-03-19 21:40:11 +13:00
DrZoid
e5b45b6b4b
e131: fix issue 1579: limitation of maximum light count ( #1619 )
2021-03-19 21:19:34 +13:00
Steve Baxter
a77784a6da
Implement pulse_meter as an improvement on pulse_counter and pulse_width for meters ( #1434 )
2021-03-19 21:16:27 +13:00
Mike Ryan
f63f9168ff
Add addressable_light display platform ( #1272 )
2021-03-18 19:08:50 +13:00
SenexCrenshaw
b5b2036971
8266 hardware spi enable with just 3 pins ( #1617 )
2021-03-18 13:59:47 +13:00
SenexCrenshaw
a96b6e7002
SPI transfer fix. Use write when no miso pin is set ( #1563 )
2021-03-18 13:54:58 +13:00
Sergey V. DUDANOV
f34c9b33fc
Midea climate support ( #1328 )
...
* Added support for Midea IoT climate devices via UART interface (USB-dongle)
* Fixed lint checks
* Fixed lint checks
* CODEOWNERS update
* Clang-format
* Clang-format
* Add network device notification message support (show WiFi sign on devices)
* Make wifi_signal_sensor optional component
* Some optimization
* Optimizations and code formatting
* Fixed lint checks
* Fixed lint checks
* Fixed sign error
* Code changes
* Network notify repeat every 10 min
* Added log messages
* Fixed lint checks
* Refactoring: MideaClimate => MideaAC
* Using enums instead literals in Midea states
* Enum changed to be more correct
* Shrink notify frame to 32 bytes
* Fixed lint checks
* Change notify frame appliance type to common broadcast
* Control optimization
* Fixed control error
* Control command now don't reset others uncontrollable properties of device
* Fixed lint checks
* Some optimization
* on_receive callback give const Frame
* Fix control
* Fixes
* Some minor changes
* Fixed lint error
* No dependency from wifi_signal sensor for stretched WiFi icon. New option: stretched_icon instead wifi_signal_id.
* Fix option name
* Added export of outdoor temperature as sensor value
* Fixed lint errors
* Fixed pylint error
* Minor fix
* Fix temperature overflow in some cases
* Added answer on QueryNetwork command from appliance. Now don't wait for ack on 0x0D command.
* Fix lint error
* Added humidity setpoint optional sensor
* Added boolean options 'swing_horizontal' and 'swing_both'
* Added debug frame output
* Added debug frame output
* Fix lints error
* Some debug output optimization
* Fix lint check
* Some code optimization: adding templates
* Fix lint error
* Added sensors device classes
* Python code reformatted with black formatter
* RX frame debug message
RX frame debug message now prints before checking
* Remove CRC check for receiving frames
* Added experimental power usage option
* Added power usage option
* Fixed lint errors
* Major changes. See esp-docs.
* Added tests in test4.yaml
* Added tests in test1.yaml
* Added wifi dependency
* Fix test1.yaml
* Some fix :)
* One more refactoring
* One more refactoring
* One more refactoring
2021-03-17 17:27:50 -03:00
Jim Ekman
7708b81ef5
Support fan speed levels ( #1541 )
...
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
2021-03-17 10:40:02 -03:00
WeekendWarrior1
08998caabc
a4988 wait 1ms when coming out of sleep ( #1597 )
2021-03-13 21:29:31 -03:00
Jesse Hills
848a5f1680
Change COLOR_ON to be 255 values instead of 1 ( #1594 )
2021-03-13 21:27:16 -03:00
Alex
2e7c1d7345
Added receive for Fujitsu ACs ( #1577 )
2021-03-13 18:45:01 -03:00
Samuel Sieb
c9ee513fa8
PN532 - don't read extra page and fix size ( #1565 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:26:55 +13:00
Samuel Sieb
2a12caa955
change lcd clear() to clear the buffer ( #1600 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-03-11 18:17:50 +13:00
Derek Hageman
2c0fe49b86
Inkplate 6 Optimizations ( #1592 )
2021-03-08 19:25:49 +13:00
Guillermo Ruffino
1e227e8051
Schema dump ( #1564 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
2021-03-07 21:05:08 -03:00
Jesse Hills
570ec36fe3
MCP23XXX Refactor ( #1560 )
...
* Refactor MCP23XXX classes to consolidate shared code
* Update test mcp23xxx pin schemas
2021-03-07 16:23:54 -03:00
Guillermo Ruffino
69879920eb
add-black ( #1593 )
...
* Add black
Update pre commit
Update pre commit
add empty line
* Format with black
2021-03-07 16:03:16 -03:00
Guillermo Ruffino
2b60b0f1fa
fix servo warning ( #1591 )
2021-03-06 19:59:06 -03:00
needspeed
0f151a8f6b
Extend 'uart:' with 'invert:' for esp32 ( #1586 )
2021-03-06 10:25:07 -03:00
Gabe Cook
88b46b7487
Add min/max filters ( #1569 )
2021-03-05 10:10:06 -03:00
nikito7
fa290fbce8
Fix for waveshare 2.13in-ttgo-b73 ( #1543 )
2021-03-04 13:50:27 +13:00
Cody James
c5dc736c53
changed color temp from float to int ( #1522 )
...
* changed color temp from float to int
Changed cold_white_temperature and warm_white temperature from a float to an integer. This makes home assisting show it correctly in the color temperature slider. If it is set to float home assistant show something like 470.8390000283847829304845 in the slider which provides an ugly ui and color temperature to as a decimal is invalid anyway.
* Update esphome/components/rgbww/light.py
* Update esphome/components/rgbww/light.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 23:41:15 -03:00
Moritz Glöckl
8e93735861
Add support for the SM300D2 7-in-1 sensor module ( #1524 )
...
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 21:54:52 -03:00
SenexCrenshaw
ac25b138f5
Migrate ESPColor to Color ( #1551 )
...
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
2021-03-02 11:08:57 -03:00
marecabo
422f0ad7a9
Add constants for device classes of binary_sensor ( #1549 )
2021-02-28 20:55:32 -03:00
Christian Ferbar
34d37961c3
ADC fix: GPIO0 not usable as output if ADC_VCC is used ( #1557 )
2021-02-28 14:02:02 -03:00
Seppel Hardt
bdf004867d
Added samsung36 ir protocol ( #1438 )
...
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
2021-02-27 20:16:27 -03:00
Gabe Cook
08ecca86bc
Add send_every to uart switch for recurring data ( #1514 )
2021-02-27 19:53:53 -03:00
marecabo
520c4331e3
Add default device classes to sensor components ( #1533 )
...
* Add device_class arg to homeassistant sensor_schema call
* Add device_class arg to mqtt_subscribe sensor_schema call
* Add device_class arg to dht sensor_schema call
* Add device_class arg to dht12 sensor_schema call
* Add device_class arg to am2320 sensor_schema call
* Add device_class arg to atc_mithermometer sensor_schema call
* Add device_class arg to atm90e32 sensor_schema call
* Add device_class arg to bh1750 sensor_schema call
* Add device_class arg to ble_rssi sensor_schema call
* Add device_class arg to bme280 sensor_schema call
* Add device_class arg to bme680 sensor_schema call
* Add device_class arg to bmp085 sensor_schema call
* Add device_class arg to bmp280 sensor_schema call
* Add device_class arg to binary_sensor_map sensor_schema call
* Add device_class arg to apds9960 sensor_schema call
* Add device_class arg to as3935 sensor_schema call
* Add device_class arg to ccs811 sensor_schema call
* Add device_class arg to cse7766 sensor_schema call
* Add device_class arg to ct_clamp sensor_schema call
* Add device_class arg to dallas sensor_schema call
* Add device_class arg to duty_cycle sensor_schema call
* Add device_class arg to esp32_hall sensor_schema call
* Add device_class arg to hdc1080 sensor_schema call
* Add device_class arg to hlw8012 sensor_schema call
* Add device_class arg to hm3301 sensor_schema call
* Add device_class arg to hmc5883l sensor_schema call
* Add device_class arg to htu21d sensor_schema call
* Add device_class arg to hx711 sensor_schema call
* Add device_class arg to ina219 sensor_schema call
* Add device_class arg to ina226 sensor_schema call
* Add device_class arg to ina3221 sensor_schema call
* Add device_class arg to ibsth1 sensor_schema call
* Add device_class arg to max31855 sensor_schema call
* Add device_class arg to max31856 sensor_schema call
* Add device_class arg to max31865 sensor_schema call
* Add device_class arg to mhz19 sensor_schema call
* Add device_class arg to max6675 sensor_schema call
* Add device_class arg to mpu6050 sensor_schema call
* Add device_class arg to ms5611 sensor_schema call
* Add device_class arg to mcp9808 sensor_schema call
* Add device_class arg to ntc sensor_schema call
* Add device_class arg to pid sensor_schema call
* Add device_class arg to pmsx003 sensor_schema call
* Add device_class arg to pulse_counter sensor_schema call
* Add device_class arg to pulse_width sensor_schema call
* Add device_class arg to pzem004t sensor_schema call
* Add device_class arg to pzemac sensor_schema call
* Add device_class arg to pzemdc sensor_schema call
* Add device_class arg to qmc5883l sensor_schema call
* Add device_class arg to resistance sensor_schema call
* Add device_class arg to rotary_encoder sensor_schema call
* Add device_class arg to ruuvitag sensor_schema call
* Add device_class arg to scd30 sensor_schema call
* Add device_class arg to sds011 sensor_schema call
* Add device_class arg to senseair sensor_schema call
* Add device_class arg to sgp30 sensor_schema call
* Add device_class arg to sht3xd sensor_schema call
* Add device_class arg to shtcx sensor_schema call
* Add device_class arg to sps30 sensor_schema call
* Add device_class arg to sts3x sensor_schema call
* Add device_class arg to sun sensor_schema call
* Add device_class arg to tcs34725 sensor_schema call
* Add device_class arg to teleinfo sensor_schema call
* Add device_class arg to template sensor_schema call
* Add device_class arg to tmp102 sensor_schema call
* Add device_class arg to tmp117 sensor_schema call
* Add device_class arg to tsl2561 sensor_schema call
* Add device_class arg to tx20 sensor_schema call
* Add device_class arg to ultrasonic sensor_schema call
* Add device_class arg to uptime sensor_schema call
* Add device_class arg to vl53l0x sensor_schema call
* Add device_class arg to wifi_signal sensor_schema call
* Add device_class arg to xiaomi_cgd1 sensor_schema call
* Add device_class arg to xiaomi_cgg1 sensor_schema call
* Add device_class arg to xiaomi_gcls002 sensor_schema call
* Add device_class arg to xiaomi_hhccjcy01 sensor_schema call
* Add device_class arg to xiaomi_hhccpot002 sensor_schema call
* Add device_class arg to xiaomi_jqjcy01ym sensor_schema call
* Add device_class arg to xiaomi_lywsd02 sensor_schema call
* Add device_class arg to xiaomi_lywsd03mmc sensor_schema call
* Add device_class arg to xiaomi_lywsdcgq sensor_schema call
* Add device_class arg to xiaomi_mhoc401 sensor_schema call
* Add device_class arg to xiaomi_mjyd02yla sensor_schema call
* Add device_class arg to xiaomi_wx08zm sensor_schema call
* Add device_class arg to zyaura sensor_schema call
* Add device_class arg to ads1115 sensor_schema call
* Add device_class arg to adc sensor_schema call
* Add device_class arg to ade7953 sensor_schema call
* Add device_class arg to aht10 sensor_schema call
* Make args of sensor_schema required
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-27 19:28:06 -03:00
Otamay
69d39ef0cd
Added heater to climate_ir_lg ( #1555 )
...
* Added heater to climate_ir_lg
* Code formatting
* Code formatting
2021-02-27 18:55:27 -03:00
Robert Resch
6588e9380e
Replace substitutions in substitutions first ( #1567 )
2021-02-27 18:47:12 -03:00
stubs12
87154e9b6f
Tuya: Use queue for sending command messages ( #1404 )
2021-02-26 12:52:40 +13:00
Kurt Kellner
b91723344e
Vl53l0x change address ( #1126 )
...
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
2021-02-25 19:12:06 -03:00
Otamay
92b36720b6
Climate IR LG -keep previous temp and fan if swing ( #1556 )
...
Swing IR command does not carry CLIMATE_FAN or TEMP within itself, so previous states sould be kept. Tested with actual LG IR remote controller.
2021-02-25 18:26:19 -03:00
spilin
3d0310d0e0
Add dial support for sim800l component ( #1558 )
2021-02-25 18:11:15 -03:00
dckiller51
f81cddf22e
Add Xiaomi Miscale v1 and v2 ( #1368 )
2021-02-22 22:23:12 +13:00
Jesse Hills
c519c02de8
Fix safe mode ota flashing under certain configurations ( #1534 )
...
* Fix safe mode ota flashing under certain configurations by allowing the arduino loop to run instead of while(true)
* rename to should_enter_safe_mode
* Fix line length
2021-02-20 19:29:52 +13:00
Samuel Sieb
eacac78099
Add reverse_enable for max7219 ( #1489 )
2021-02-20 19:29:52 +13:00
Kris
a925036ff8
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-20 19:29:52 +13:00
SenexCrenshaw
1468293f3e
fix DHT auto_detect check ( #1536 )
2021-02-20 19:29:52 +13:00
Guillermo Ruffino
25924ca4e8
fix substitution losing track of document range ( #1547 )
2021-02-19 21:52:42 -03:00
Jesse Hills
6c8ace0ce8
Fix safe mode ota flashing under certain configurations ( #1534 )
...
* Fix safe mode ota flashing under certain configurations by allowing the arduino loop to run instead of while(true)
* rename to should_enter_safe_mode
* Fix line length
2021-02-17 20:26:59 -03:00
Samuel Sieb
acc1af0f51
Add reverse_enable for max7219 ( #1489 )
2021-02-18 08:26:22 +13:00
Kris
c92c439d17
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-18 07:12:02 +13:00
SenexCrenshaw
410fad3b41
fix DHT auto_detect check ( #1536 )
2021-02-16 20:42:14 +13:00
Chris Nussbaum
dce20680d7
Add duration option to action start deep sleep ( #1526 )
2021-02-15 14:32:22 -03:00
marecabo
f95be6a0df
Device class attribute for sensor component ( #1525 )
...
* Add constants for sensor device_class
* Add device_class attribute to sensor component
* Add device_class attribute to sensor class
* Add device_class to mhz19 temperature sensor
* Add device_class to sensor in api component
* Add test for device_class of sensor
* Rename DEVICE_CLASS_NONE to DEVICE_CLASS_EMPTY for consistency
* Make optional attributes of sensor component truly optional
2021-02-15 12:49:02 -03:00
SenexCrenshaw
a342302114
st7735_conf_fixes ( #1530 )
2021-02-14 02:21:43 -03:00
Keith Burzinski
65c7e27a43
MCP230xx open drain interrupt pins ( #1243 )
2021-02-14 10:01:21 +13:00
Frank Bakker
57b56010da
Added energy sensor to hlw8012 ( #1198 )
2021-02-14 10:01:21 +13:00
SenexCrenshaw
ef89249019
Fixed ST7735 transfer_byte to write_byte without miso ( #1529 )
2021-02-14 10:01:21 +13:00
Jesse Hills
def70dde72
Fix PN532 SPI communication ( #1511 )
2021-02-14 10:01:21 +13:00
Keith Burzinski
b52f7cfe86
MCP230xx open drain interrupt pins ( #1243 )
2021-02-13 22:07:11 +13:00
Frank Bakker
81b512a7b3
Added energy sensor to hlw8012 ( #1198 )
2021-02-13 21:57:06 +13:00
Justin Gerhardt
57d6185374
Correct Native API Wire Format Documentation ( #1528 )
2021-02-13 21:36:39 +13:00
SenexCrenshaw
e288aa07fb
Fixed ST7735 transfer_byte to write_byte without miso ( #1529 )
2021-02-13 21:34:59 +13:00
rspaargaren
23cf120977
Added codeowners ( #1487 )
2021-02-10 09:20:31 -03:00
Jérémy JOURDIN
04d8593f38
Add MCP4725 DAC Component ( #1418 )
...
* Add MCP4725 DAC
* Fix lint
* Fix lint
* Fix lint
* Lint & cleanup
* Lint again
* One more lint
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-06 12:18:48 -03:00
fkirill
de3377132d
Adding support for the Inkbird IBS-TH1 Mini sensor ( #1099 )
2021-02-06 17:04:47 +13:00
Jesse Hills
b351cd94d7
Fix PN532 SPI communication ( #1511 )
2021-02-06 11:02:20 +13:00
Guillermo Ruffino
1952d275f7
RC522 increased retry loop count ( #1506 )
2021-02-03 12:33:29 +13:00
Guillermo Ruffino
bccaa78a90
RC522 increased retry loop count ( #1506 )
2021-02-03 12:30:20 +13:00
Jesse Hills
a7ec57d4be
Allow SCD30 sensors to be optional ( #1502 )
2021-02-01 15:34:44 +13:00
Jesse Hills
4eeb111fa3
Allow SCD30 sensors to be optional ( #1502 )
2021-01-30 16:50:09 +13:00
nikito7
5057caa7fc
Add support for MHO-C401 ( #1486 )
...
Committer: nikito7
Co-authored-by: vevsvevs <v-v@mail.ru>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: nikito7 <root@vbox.lan>
2021-01-27 23:04:20 +13:00
Paul Nicholls
ea019a057b
Add support for string-type Tuya datapoints ( #1488 )
2021-01-27 23:04:20 +13:00
nikito7
1d378e416d
Add support for MHO-C401 ( #1486 )
...
Committer: nikito7
Co-authored-by: vevsvevs <v-v@mail.ru>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: nikito7 <root@vbox.lan>
2021-01-27 20:14:43 +13:00
mhentschke
7b9c2d2978
Added options to control pulse duration on Climate_IR_LG Component ( #1470 )
...
* Added options to control pulse duration on Climate_IR_LG Component. This is usefull as some equipment from LG (Tested in Brazil AC unit) use different pulse durations in their protocol.
* Fixed C++ linting issues
* Fixed Python linting issues
* fixed spaces on parameters linting issue
* fixed spacing clint
* Removed unused constants
* Removed wrong spacing
* Changed int to time period in all new fields
Changed cv._int to cv.positive_time_period_microseconds in the time definitions for the new options
* Fixed the time defaults
Time defaults fixed for Climate_IR_LG.
2021-01-26 15:49:14 -03:00
Paul Nicholls
9d38543cb0
Add support for string-type Tuya datapoints ( #1488 )
2021-01-26 17:44:10 +13:00
SenexCrenshaw
65fbb8bc60
SPI wasnt being disabled after display update ( #1493 )
2021-01-26 13:39:42 +13:00
Philipp Tölke
97428f2ba2
Make fade_to*, lighten, and darken const ( #1450 )
2021-01-26 13:39:42 +13:00
Zixuan Wang
9ab6a7b7ff
Improve ccs811 precision ( #1428 )
2021-01-26 13:39:42 +13:00
Florian Mösch
e2ad6fe3d8
rename read/write to read/time/write_time ( #1468 )
2021-01-26 13:39:42 +13:00
Florian Mösch
6781d08c9b
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-26 13:39:42 +13:00
SenexCrenshaw
36a2ce2c23
SPI wasnt being disabled after display update ( #1493 )
2021-01-26 13:14:23 +13:00
Philipp Tölke
f084ab339b
Make fade_to*, lighten, and darken const ( #1450 )
2021-01-22 20:55:49 +13:00
Zixuan Wang
8352f52fef
Improve ccs811 precision ( #1428 )
2021-01-22 20:51:40 +13:00
Florian Mösch
b28735d63b
rename read/write to read/time/write_time ( #1468 )
2021-01-18 09:35:35 -03:00
Florian Mösch
4c105398f7
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-18 09:34:50 -03:00
David Zovko
6a99789c92
Inkplate 6 support for ESPHome ( #1283 )
...
* Add Inkplate 6 support
Inkplate 6 is e-paper display based on ESP32. This commit adds support for integrating Inkplate 6 into the ESPHome. Find more info here: inkplate.io
* Greyscale working
* Update inkplate.h
* Fix formatting
* Formatting
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Fix some lint errors
Ignore some lint errors
Only allow on ESP32
* Update the codeowners file
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:38 +13:00
Jesse Hills
52e13164b4
Add NDEF reading and writing to PN532 ( #1351 )
2021-01-17 17:06:38 +13:00
SenexCrenshaw
28f2582256
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:37 +13:00
Florian Mösch
652f6058d1
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-17 17:06:37 +13:00
Guillermo Ruffino
717aab7c8b
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-17 17:06:37 +13:00
mmanza
9f36b25d4e
Whirlpool ac ( #1467 )
...
* Checksum calc change
* first checksum change for MODEL_DG11J1_3A
2021-01-17 17:06:37 +13:00
David Zovko
d9a2651a5a
Inkplate 6 support for ESPHome ( #1283 )
...
* Add Inkplate 6 support
Inkplate 6 is e-paper display based on ESP32. This commit adds support for integrating Inkplate 6 into the ESPHome. Find more info here: inkplate.io
* Greyscale working
* Update inkplate.h
* Fix formatting
* Formatting
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/inkplate6/display.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Fix some lint errors
Ignore some lint errors
Only allow on ESP32
* Update the codeowners file
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-16 13:19:35 +13:00
Jesse Hills
5fcd1e391d
Add NDEF reading and writing to PN532 ( #1351 )
2021-01-15 09:29:55 +13:00
SenexCrenshaw
36089a1400
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-14 07:33:19 +13:00
Florian Mösch
bf453ad8cd
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-12 15:37:22 -03:00
Guillermo Ruffino
fbc1b3e316
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-12 10:13:53 -03:00
mmanza
3c34b539b0
Whirlpool ac ( #1467 )
...
* Checksum calc change
* first checksum change for MODEL_DG11J1_3A
2021-01-12 09:51:38 -03:00
mknjc
b01db991a5
API: copy the data to send into the tcp internal buffer ( #1455 )
...
Without the flag lwip only holds a reference to the supplied buffers and the reference must be valid until the tcp ack is received. This can't be guaranteed for stack allocated buffers
2021-01-12 09:42:19 +13:00
mknjc
96ab6b51b8
API: copy the data to send into the tcp internal buffer ( #1455 )
...
Without the flag lwip only holds a reference to the supplied buffers and the reference must be valid until the tcp ack is received. This can't be guaranteed for stack allocated buffers
2021-01-11 10:46:21 -03:00
mknjc
72002ce70e
Rotary Encoder: Don't call callbacks in the isr ( #1456 )
2021-01-11 20:10:35 +13:00
Dan Jackson
c67539cf5b
Add encode_uint32 method ( #1427 )
2021-01-11 20:10:35 +13:00
Florian Mösch
dcd3d2084d
DS1307 real time clock component ( #1441 )
...
* initial support for DS1307 real time clock
* add simple test, make sync functions public
* cleanup lint
* add sync to/from rtc actions
* changes action names
* Update esphome/components/ds1307/ds1307.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/ds1307/time.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* fix suggested change
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-01-11 20:10:35 +13:00
mknjc
02dc49c272
Rotary Encoder: Don't call callbacks in the isr ( #1456 )
2021-01-11 08:05:53 +13:00
Dan Jackson
5df398ec31
Add encode_uint32 method ( #1427 )
2021-01-10 17:53:12 +13:00
Florian Mösch
699696e8d1
DS1307 real time clock component ( #1441 )
...
* initial support for DS1307 real time clock
* add simple test, make sync functions public
* cleanup lint
* add sync to/from rtc actions
* changes action names
* Update esphome/components/ds1307/ds1307.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/ds1307/time.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* fix suggested change
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-01-08 19:40:22 -03:00
Jesse Hills
0a841fcc50
Merge branch 'dev' into bump-1.16.0b1
2021-01-09 00:04:33 +13:00
Fractal147
3c64c9b0e9
Fix stepper half half step mode ( #1397 )
...
* Fixed half half step mode
Half step mode originally had second and third steps mixed up for output A.
https://github.com/esphome/issues/issues/1655
* Updated half step mode to have no branching
Code based off comments in PR: https://github.com/esphome/esphome/pull/1397#issuecomment-739413973
* removed variable declarations in the switch/case
Oops. No explicit declarations.
Rearranged to be tidier, same output sequence.
* Fixed typo bracket
Minor typo fixed - logic complete to do branchless half stepping.
* Format the brackets to satisfy clang
2021-01-08 00:17:41 -03:00
rradar
34df25da39
Update __init__.py ( #1454 )
...
:cherry: picked from esphome/esphome@32a4680 branch (fix-sn74hc595-optional-oe-pin) by @OttoWinter
2021-01-08 00:12:55 -03:00
Andreas Hergert
16d11be213
added slow mode and detach time to servo ( #1413 )
...
* added slow mode and detach time to servo
* tidy
* and again tidy
* add change requests
* tidy
* tidy
* tidy
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
2021-01-03 17:57:30 -03:00
M95D
e49b568fd4
rc_switch: Fix Sync signal sent after the code. ( #1426 )
2020-12-30 23:11:46 +13:00
