Eric van Blokland
6349b5f654
Added RC6 protocol support ( #3514 )
2022-06-03 15:37:04 +12:00
Joe
a6ff02a3cf
Refactor clock syncing ( #3503 )
...
* Expose `send_local_time()` as public, for use in lambdas.
This will send the current time configured in `time_id`.
* Add a new `set_clock()` public method, separate from time_id.
This allows setting the clock manually, without syncing from a Time
Component. Again this can only be called from ESPHome; i.e.,
generally from a lambda.
2022-06-03 13:53:20 +12:00
jimtng
4f57bf786b
Add mqtt.on_connect and mqtt.on_disconnect triggers ( #3520 )
2022-06-03 13:51:50 +12:00
Jesse Hills
6221f6d47d
Implement Media Player and I2S Media player ( #3487 )
2022-06-02 17:00:17 +12:00
Wolfgang Tremmel
a922efeafa
Change rain intensity sensor string ( #3511 )
2022-05-31 16:49:18 +12:00
jimtng
5aa42e5e66
Add variable substitutions for !include ( #3510 )
2022-05-31 16:45:18 +12:00
Joe
708672ec7e
[BedJet] Add configurable heating strategy ( #3519 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-31 15:45:01 +12:00
Jan Grewe
d2cefbf224
Allow Prometheus component to export internal components ( #3508 )
...
Co-authored-by: Jan Grewe <jan.grewe@flixbus.com>
2022-05-31 07:29:57 +12:00
Michael Davidson
adb7aa6950
Thermostat preset with modes ( #3298 )
...
* Rework HOME/AWAY support to being driven via a map of ClimatePreset/ThermostatClimateTargetTempConfig
This opens up to theoretically being able to support other presets (ECO, SLEEP, etc)
* Add support for additional presets
Configuration takes the form;
```
climate:
platform: preset
...
preset:
[eco | away | boost | comfort | home | sleep | activity]:
default_target_temperature_low: 20
default_target_temperature_high: 24
```
These will be available in the Home Assistant UI and, like the existing Home/Away config will reset the temperature in line with these defaults when selected. The existing away_config/home_config is still respected (although preset->home/preset->away will be applied after them and override them if both styles are specified)
* Add support for specifying MODE, FAN_MODE and SWING_MODE on a preset
When switching presets these will implicitly flow through to the controller. However calls to climate.control which specify any of these will take precedence even when changing the mode (think of the preset version as the default for that preset)
* Add `preset_change` mode trigger
When defined this trigger will fire when the preset for the thermostat has been changed. The intent of this is similar to `auto_mode` - it's not intended to be used to control the preset's state (eg. communicate with the physical thermostat) but instead might be used to update a visual indicator, for instance.
* Apply lint, clang-format, and clang-tidy fixes
* Additional clang-format fixes
* Wrap log related strings in LOG_STR_ARG
* Add support for custom presets
This also changes the configuration syntax to;
```yaml
preset:
# Standard preset
- name: [eco | away | boost | comfort | home | sleep | activity]
default_target_temperature_low: 20
...
# Custom preset
- name: My custom preset
default_target_temperature_low: 18
```
For the end user there is no difference between a custom and built in preset. For developers custom presets are set via `climate.control` `custom_preset` property instead of the `preset`
* Lint/clang-format/clang-tidy fixes
* Additional lint/clang-format/clang-tidy fixes
* Clang-tidy changes
* Sort imports
* Improve configuration validation for presets
- Unify temperature validation across default, away, and preset configuration
- Validate modes for presets have the required actions
* Trigger a refresh after changing internals of the thermostat
* Apply formatting fixes
* Validate mode, fan_mode, and swing_mode on presets
* Add preset temperature validation against visual min/max configuration
* Apply code formatting fixes
* Fix preset temperature validation
2022-05-24 22:44:26 -05:00
Wumpf
cd35ead890
[scd4x] Fix not passing arguments to templatable value for perform_forced_calibration ( #3495 )
2022-05-24 13:00:06 +12:00
joseph douce
9dc804ee27
Output a true RMS voltage % ( #3494 )
2022-05-24 12:52:54 +12:00
Martin
a8ceeaa7b0
esp32: fix NVS ( #3497 )
2022-05-23 20:56:26 +12:00
Sergey Dudanov
7092f7663e
midea: New power_toggle action. Auto-use remote transmitter. ( #3496 )
2022-05-23 20:51:45 +12:00
Jesse Hills
d9d2edeb08
Fix compile issues on windows ( #3491 )
2022-05-19 21:21:42 +12:00
Jesse Hills
dda1ddcb26
Add missing import to bedjet ( #3490 )
2022-05-19 16:23:40 +12:00
Keilin Bickar
f0c890f160
Remove deprecated fan speeds ( #3397 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:50:44 +12:00
gazoodle
4f52d43347
add support user-defined modbus functions ( #3461 )
2022-05-19 12:49:12 +12:00
Martin
0ed7db979b
Add support for SGP41 ( #3382 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:47:33 +12:00
myml
9c78049359
feat: esp32-camera add stream event ( #3285 )
2022-05-19 12:23:50 +12:00
user897943
7882105661
Update bedjet_const.h to remove blank spaces before speed steps, fixes Unknown Error when using climate.set_fan_mode in HA ( #3476 )
2022-05-19 10:25:42 +12:00
Dave T
c000e1d6dd
Ili9341 8bit indexed mode pt1 ( #2490 )
2022-05-19 10:23:00 +12:00
Jesse Hills
282d9e138c
Revert adding spaces
2022-05-17 23:31:55 +12:00
Samuel Sieb
6f49f5465b
Retry Tuya init commands ( #3482 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-05-17 23:23:33 +12:00
Martin
17b8bd8316
ESP32: Only save to NVS if data was changed ( #3479 )
2022-05-17 23:16:33 +12:00
Samuel Sieb
9b6b9c1fa2
Retry Tuya init commands ( #3482 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-05-17 20:15:02 +12:00
Martin
609a2ca592
ESP32: Only save to NVS if data was changed ( #3479 )
2022-05-17 10:59:36 +12:00
[pʲɵs]
6dabf24bf3
MQTT cover: send state even if position is available ( #3473 )
2022-05-16 15:35:27 +12:00
Jesse Hills
a639690716
Mark improv_serial and ESP-IDF usb based serial on c3/s2/s3 unsupported ( #3477 )
2022-05-16 13:07:12 +12:00
[pʲɵs]
01222dbab7
Increase JSON buffer size on overflow ( #3475 )
2022-05-16 13:07:12 +12:00
Jesse Hills
93e2506279
Mark improv_serial and ESP-IDF usb based serial on c3/s2/s3 unsupported ( #3477 )
2022-05-16 13:05:20 +12:00
Maxim Ocheretianko
f62d5d3b9d
Add Tuya select ( #3469 )
2022-05-16 07:49:40 +12:00
Maxim Ocheretianko
0665acd190
Tuya status gpio support ( #3466 )
2022-05-16 07:44:14 +12:00
[pʲɵs]
fea05e9d33
Increase JSON buffer size on overflow ( #3475 )
2022-05-15 19:53:43 +12:00
Dave T
39c6c2417a
Remove duplicate convert_to_8bit_color_ function. ( #2469 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-05-12 22:18:51 +12:00
Brian Kaufman
28883f711b
Update captive portal canHandle function ( #3360 )
2022-05-12 17:00:13 +12:00
Michael Davidson
e914828add
Make custom_fan and custom_preset templatable as per documentation ( #3330 )
2022-05-12 17:00:13 +12:00
James Szalay
c1480029fb
Use heat mode for heat. Move EXT HT to custom presets. ( #3437 )
...
* Use heat mode for heat. Move EXT HT to custom presets.
* Fix syntax error.
2022-05-12 17:00:13 +12:00
Niclas Larsson
40f622949e
Shelly dimmer: Use unique_ptr to handle the lifetime of stm32_t ( #3400 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 17:00:13 +12:00
Maurice Makaay
63096ac2bc
On epoch sync, restore local TZ ( #3462 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-12 17:00:13 +12:00
Brian Kaufman
03d5a0ec1d
Update captive portal canHandle function ( #3360 )
2022-05-12 16:57:50 +12:00
Michael Davidson
1c873e0034
Make custom_fan and custom_preset templatable as per documentation ( #3330 )
2022-05-12 16:54:45 +12:00
swifty99
bcb47c306c
Tcs34725 automatic sampling settings for improved dynamics and accuracy ( #3258 )
...
Co-authored-by: Daniel Cousens <413395+dcousens@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 16:53:33 +12:00
James Szalay
01c4d3c225
Use heat mode for heat. Move EXT HT to custom presets. ( #3437 )
...
* Use heat mode for heat. Move EXT HT to custom presets.
* Fix syntax error.
2022-05-12 15:26:14 +12:00
Niclas Larsson
c2aaae4818
Shelly dimmer: Use unique_ptr to handle the lifetime of stm32_t ( #3400 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 10:26:51 +12:00
Maurice Makaay
3f678e218d
On epoch sync, restore local TZ ( #3462 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-12 09:25:00 +12:00
Jesse Hills
0f1a7c2b69
Merge branch 'dev' into bump-2022.5.0b1
2022-05-11 12:50:41 +12:00
Jesse Hills
40ad9f4911
Add deep_sleep.allow YAML action ( #3459 )
2022-05-11 12:47:50 +12:00
Ruben De Smet
4116caff6a
Implement allow_deep_sleep ( #3282 )
2022-05-11 11:44:52 +12:00
Maurice Makaay
c569f5ddcf
Code cleanup fixes for the number component ( #3458 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 11:02:49 +12:00
Maurice Makaay
62f9e181e0
Code cleanup fixes for the select component ( #3457 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 10:58:28 +12:00
MFlasskamp
e541ae400c
Esp32c3 deepsleep fix ( #3454 )
2022-05-10 22:03:59 +12:00
Massimo Cetra
4822abde86
Fix BLE280 setup when the sensor is marked as failed. ( #3396 )
2022-05-10 22:03:40 +12:00
LuBeDa
69118120d9
added prev_frame for animation ( #3427 )
2022-05-10 21:56:29 +12:00
Dennis
7cba0c6fb0
Fix cover set position by force pushing position_id datapoint (simila… ( #3435 )
2022-05-10 21:42:31 +12:00
Felix Storm
5fac67ce15
CAN bus: on_frame remote_transmission_request ( #3376 )
2022-05-10 21:39:18 +12:00
Matthew Garrett
98c733108e
PMSX003: Add support for specifying the update interval and spinning down ( #3053 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-05-10 21:35:43 +12:00
Martin
782186e13d
extend scd4x ( #3409 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:25:44 +12:00
George
4e1f6518e8
Delonghi Penguino PAC W120HP ir support ( #3124 )
2022-05-10 21:22:22 +12:00
Andre Lengwenus
53e0fe8e51
Add SML (Smart Message Language) platform for energy meters ( #2396 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:05:49 +12:00
Martin
0e547390da
add support for Sen5x sensor series ( #3383 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 20:15:02 +12:00
Martin
86b52df839
tca9548a fix channel selection ( #3417 )
2022-05-10 17:17:55 +12:00
MFlasskamp
d685fdf54a
mask deprecated adc_gpio_init() for esp32-s2 ( #3445 )
2022-05-10 17:16:16 +12:00
Maurice Makaay
d9caab4108
Number enhancement ( #3429 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 16:58:56 +12:00
Maurice Makaay
44b68f140e
Select enhancement ( #3423 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-10 16:41:16 +12:00
Unai
3a3d97dfa7
Add SERIAL_JTAG/CDC logger option for ESP-IDF platform for ESP32-S2/S3/C3 ( #3105 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 13:28:22 +12:00
MFlasskamp
47898b527c
Esp32c3 deepsleep fix ( #3433 )
2022-05-09 20:32:14 +12:00
Jesse Hills
df999723f8
Force using name substitution when adopting a device ( #3451 )
2022-05-09 19:43:09 +12:00
Jesse Hills
8236e840a7
Fix spi transfer with miso pin defined on espidf ( #3450 )
2022-05-09 19:24:27 +12:00
Ingo Theiss
50a32b387e
Add ENS210 Humidity & Temperature sensor component ( #2942 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:23:38 +12:00
rainero84
2059283707
Early pin init ( #3439 )
...
* Added early_pin_init configuration parameter for ESP8266 platform
* Added #include to core
* Updated test3.yaml to include early_pin_init parameter
Co-authored-by: Rainer Oellermann <ro@playplaycode.com>
2022-05-09 17:21:43 +12:00
Patrick van der Leer
8e3af515c9
Waveshare epaper 7in5 v2alt ( #3276 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:17:36 +12:00
Jens-Christian Skibakk
d2f37cf3f9
Support for Arduino 2 and serial port on ESP32-S2 and ESP32-C3 ( #3436 )
2022-05-09 16:17:22 +12:00
Dan Jackson
91895aa70c
Allow wifi output_power down to 8.5dB ( #3405 )
2022-05-03 19:09:06 +12:00
LuBeDa
68dfaf238b
added RGB565 image type ( #3229 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-27 08:41:10 +12:00
Trevor North
ebf13a0ba0
Queue sensor publishes so we don't block for too long ( #3422 )
2022-04-27 07:51:22 +12:00
code-review-doctor
2bff9937b7
Fix issue probably-meant-fstring found at https://codereview.doctor ( #3415 )
2022-04-27 07:43:35 +12:00
Jesse Hills
256395c28d
Add duration device class for sensors ( #3421 )
2022-04-26 21:02:08 +12:00
Martin
6fe22a7e62
SPS30: Add fan action ( #3410 )
...
* Add fan action to SPS30
* add codeowner
2022-04-26 09:50:36 +12:00
I. Tomita
7a778f3f33
Add support for BL0939 (Sonoff Dual R3 V2 powermeter) ( #3300 )
2022-04-21 10:11:25 +12:00
Jesse Hills
ad41c07a1f
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 16:35:42 +12:00
James Duke
9576d246ee
Add support for Mopeka Pro+ Residential sensor ( #3393 )
...
* Add support for Pro+ Residential sensor (enum)
The Mopeka Pro+ Residential sensor is very similar to the Pro sensor, but includes a longer range antenna, and maybe hardware? The Pro+ identifies itself with 0x08 sensor type.
* Add logic to support Pro+ Residential sensor
* Fix formatting
2022-04-20 12:50:24 +12:00
parats15
988d3ea8ba
Multi conf for Teleinfo component ( #3401 )
2022-04-20 12:46:55 +12:00
Jesse Hills
0767b92b62
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 06:56:09 +12:00
rnauber
9283559c6b
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 12:33:38 +12:00
Michel van de Wetering
6b393438e9
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 12:33:38 +12:00
rnauber
2064abe16d
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 08:43:34 +12:00
Michel van de Wetering
b605982f94
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 08:42:02 +12:00
Janez Troha
2243021b58
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:48:35 +12:00
rnauber
d5134e88b1
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:48:35 +12:00
matthias882
c59adf612f
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 13:48:35 +12:00
Janez Troha
93b628d9a8
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:42:43 +12:00
Joe
6bac551d9f
Add BedJet BLE climate component ( #2452 )
2022-04-14 13:16:13 +12:00
rnauber
70a35656e4
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:13:51 +12:00
Jesse Hills
047c18eac0
Add default object_id_generator for mqtt ( #3389 )
2022-04-14 11:25:31 +12:00
matthias882
b4a86ce6cf
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 09:36:16 +12:00
Jesse Hills
a9b5e8d036
Merge branch 'dev' into bump-2022.4.0b1
2022-04-13 13:42:27 +12:00
Jesse Hills
8be704e591
Allow specifying deep sleep wakup clock time ( #3312 )
2022-04-13 12:55:26 +12:00
Jesse Hills
b622a8fa58
Move PN532OnTagTrigger to nfc::NfcOnTagTrigger ( #3379 )
2022-04-13 12:26:55 +12:00
Martin
d620b6dd5e
Refactor Sensirion Sensors ( #3374 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:19:48 +12:00
Janez Troha
99335d986e
Use correct http defines ( #3378 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:14:21 +12:00
cvwillegen
7895cd92cd
Remote base pronto receive ( #2826 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 07:39:38 +12:00
anatoly-savchenkov
8b2c032da6
Add Sonoff D1 Dimmer support ( #2775 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-12 17:03:32 +12:00
Jesse Hills
da336247eb
Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 ( #3186 )
2022-04-12 16:19:16 +12:00
andrewpc
dabd27d4be
Addition of Deep Sleep RTC pin definition for ESP32-S2 ( #3303 )
2022-04-12 12:45:54 +12:00
functionpointer
fdda47db6e
Add integration hydreon_rgxx for rain sensors by Hydreon ( #2711 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-11 14:50:56 +12:00
Jesse Hills
efa6fd03e5
Make home_assistant imported sensors internal by default ( #3372 )
2022-04-11 12:45:15 +12:00
rrooggiieerr
9e3e34acf5
Add cover toggle support to endstop cover ( #3358 )
2022-04-11 10:55:45 +12:00
calco88
a2d0c1bf18
Fix HM3301 AQI int8 overflow ( #3361 )
2022-04-11 10:14:53 +12:00
RadekHvizdos
2b91c23bf3
Extend mcp3204 to support 8 channels (mcp3208 variant) ( #3332 )
2022-04-11 08:44:11 +12:00
Samuel Sieb
3297267a16
Fix SHTC3 sensor detection ( #3365 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-04-11 08:42:31 +12:00
Keilin Bickar
a9e653724c
Add parameter to control i2c stop signal at endTransmission ( #3370 )
2022-04-11 08:38:29 +12:00
djwlindenaar
5e79a1f500
Implement newer RTU protocol of Growatt inverters ( #3315 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Daniel Lindenaar <daniel-git@lindenaar.eu>
2022-04-11 08:06:11 +12:00
Tim Smeets
d4ff98680a
Add support for Electrolux heatpump and bump arduino-heatpumpir version ( #3353 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-08 08:04:00 +12:00
Jesse Hills
ba8d255cb4
Allow on_value_range for sensor and number to be templated ( #3359 )
2022-04-05 22:06:36 +12:00
Michiel van Turnhout
70fafa473b
Tm1637 binarysensor ( #2792 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:42:10 +12:00
Felix Storm
2e436eae6b
CAN bus: support remote transmission request flag for canbus.send ( #3193 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:15:51 +12:00
Andrew J.Swan
fd7e861ff5
Added a function to load custom characters in LCD display ( #3279 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:13:59 +12:00
Martin
792108686c
Add mqtt for idf ( #2930 )
...
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-04-04 11:07:20 +12:00
Branden Cash
fa1b5117fd
feat: support ble_client that use security w/o pin codes ( #3320 )
2022-04-04 09:35:48 +12:00
Adrián Panella
b0bd9e0a34
protobuf: fix incomplete 64 bits implementation ( #3341 )
2022-04-04 08:38:44 +12:00
Guillermo Ruffino
05dc97099a
New vscode schema gen ( #3336 )
2022-04-03 19:30:22 +12:00
Ian Reinhart Geiser
9de61fcf58
Define touchscreen support when in use. ( #3296 )
2022-04-01 16:46:39 +13:00
Jesse Hills
7f7175b184
Publish custom data when modbus number lambda fills vector ( #3295 )
2022-03-29 22:22:11 +13:00
Dan Jackson
cf5c640ae4
Change beginning of file comments to avoid creating doxygen tag for esphome namespace ( #3314 )
2022-03-29 22:05:38 +13:00
Jesse Hills
6b9371d105
Actually increase request memory for json parsing ( #3331 )
2022-03-28 17:04:25 +13:00
Otto Winter
9a82057303
Font allow using google fonts directly ( #3243 )
2022-03-28 12:07:48 +13:00
Stanislav Meduna
48584e94c4
Allow to set user defined characters on LCD ( #3322 )
2022-03-24 19:37:48 +13:00
H. Árkosi Róbert
2034ab4f6c
increase delay for Ethernet module warm up ( #3326 )
2022-03-24 14:28:21 +13:00
Jesse Hills
58b70b42dd
Add small delay before setting up app in safe mode ( #3323 )
2022-03-23 11:12:22 +13:00
Jesse Hills
1496bc1b07
Reserve less memory for json ( #3289 )
2022-03-23 09:46:25 +13:00
Jesse Hills
bfbf88b2ea
Webserver utilize Component Iterator to not overload eventstream ( #3310 )
2022-03-23 09:45:05 +13:00
wysiwyng
e621b938e3
Fix WDT reset during dallas search algorithm ( #3293 )
2022-03-16 20:33:05 +01:00
Jesse Hills
756f71c382
Allow custom register type for modbus number ( #3202 )
2022-03-16 14:06:00 +13:00
stegm
06a3505698
Add optimistic config flag to modbus select. ( #3267 )
2022-03-16 14:06:00 +13:00
Jesse Hills
0372d17a11
Allow custom register type for modbus number ( #3202 )
2022-03-16 13:43:05 +13:00
rbaron
68e957c147
Adds support for b-parasite's v2 BLE protocol ( #3290 )
2022-03-16 11:05:29 +13:00
andrewpc
99f5ed1461
Add support for QMP6988 Pressure sensor ( #3192 )
2022-03-15 08:09:17 +13:00
Rai-Rai
59f67796dc
Fixed wrong comment ( #3286 )
2022-03-14 08:00:00 +13:00
stegm
aafdfa933e
Add optimistic config flag to modbus select. ( #3267 )
2022-03-10 08:40:43 +13:00
Jesse Hills
5068619f1b
Merge branch 'dev' into bump-2022.3.0b1
2022-03-09 20:07:49 +13:00
wilberforce
5b2457af0b
Add visual step/min/max for webserver climate ( #3275 )
2022-03-09 10:28:16 +13:00
JasperPlant
4c22a98b0b
Add entity_category_diagnostics to SGP30 baseline sensors ( #3272 )
2022-03-08 15:21:13 +13:00
wilberforce
3b8ca80900
Webserver v2 ( #2688 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-08 15:02:24 +13:00
Jesse Hills
dc6eff83ea
Only get free memory size from internal ( #3259 )
2022-03-02 16:44:35 +13:00
Jesse Hills
38ff66debd
Remove stray define ( #3260 )
2022-03-02 16:32:45 +13:00
Sean Brogan
1d2e0f74ea
Add Mopeka BLE and Mopeka Pro Check BLE Sensor ( #2618 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-01 11:30:33 +13:00
Jesse Hills
bf60e40d0b
Add optional display page for touchscreen binary sensors ( #3247 )
2022-02-23 11:05:53 +13:00
RubyBailey
c9094ca537
Add sensor support: Honeywell ABP (SPI version) ( #3164 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
2022-02-22 11:22:30 +01:00
Nicholas Peters
9323b3a248
Fix regression caused by TSL2591 auto gain ( #3249 )
2022-02-22 13:53:24 +13:00
Jesse Hills
b55e9329d9
Fix template button after abstract press_action ( #3250 )
2022-02-22 13:47:16 +13:00
Micha Nordmann
a5b4105971
support for waveshare 7.50in-hd-b ( #3239 )
2022-02-22 07:35:04 +13:00
Arturo Casal
d1feaa935d
Add device support: MCP4728 ( #3174 )
...
* Added MCP4728 output component.
* Added tests to test1.yaml
* Added codeowners
* Lint fixes
* Implemented code review changes
* Lint fixes
* Added i2c communication check on setup()
* Fixed tests
* Lint fix
* Update esphome/components/mcp4728/mcp4728_output.cpp
Changed log function
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 12:47:03 +01:00
Martin Weinelt
6919930aaa
Respect ESPHOME_USE_SUBPROCESS in esp32 post_build script ( #3246 )
2022-02-21 14:05:13 +13:00
EdJoPaTo
69633826bb
Implement send_first_at for exponential_moving_average ( #3240 )
2022-02-21 13:13:06 +13:00
Niorix
771162bfb1
light: add RESTORE_AND_OFF/RESTORE_AND_ON LightRestoreMode ( #3238 )
2022-02-21 12:52:14 +13:00
Fabian Affolter
ba785e29e9
Add support for MPU-6886 ( #3183 )
2022-02-21 12:23:26 +13:00
Jesse Hills
78951c197a
Fix lilygo touchscreen rotation ( #3221 )
2022-02-21 09:58:53 +13:00
cstaahl
07c1cf7137
Pulse meter internal filter mode ( #3082 )
...
Co-authored-by: Paul Daumlechner <paul.daumlechner@live.de>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 09:32:35 +13:00
Otto Winter
d26141151a
Button code cleanup ( #3242 )
2022-02-21 09:17:51 +13:00
Otto Winter
f59dbe4a88
Add copy integration ( #3241 )
2022-02-21 09:13:37 +13:00
Otto Winter
5811389891
BH1750 dynamically calculate options ( #3214 )
...
* BH1750 dynamically calculate options
* Fix tests
* Fix NAN
* Convert setup to new-style
* Add myself as codeowner
2022-02-19 15:49:20 +01:00
Otto Winter
debcaf6fb7
Add ESP32C3 and ESP32S2 support to dashboard ( #3152 )
...
* Add ESP32C3 and ESP32S2 support to dashboard
* Format
* Fix tests
2022-02-19 15:47:50 +01:00
Tyler Bules
b8d10a62c2
ESP32-C3 deep sleep fix ( #3066 )
2022-02-19 15:13:48 +01:00
Otto Winter
34c9d8be50
Lint trailing whitespace ( #3230 )
2022-02-19 14:46:27 +01:00
Otto Winter
0c1520dd9c
Fix ESP8266 climate memaccess warning ( #3226 )
2022-02-19 14:11:45 +01:00
Otto Winter
d594f43ebd
Publish NAN when dallas conversion failed ( #3227 )
2022-02-19 14:11:01 +01:00
Oxan van Leeuwen
125c693e3f
Add ESP32 variant config validator function ( #3088 )
...
* Add esp32_variant config validator function
* Drop unused is_esp32c3 function
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 11:41:34 +01:00
mknjc
ad2f857e15
[miscale] Add flag to clear last impedance reading if the newly received reading only contains weight ( #3132 )
2022-02-19 10:59:53 +01:00
Peter Valkov
e445d6aada
Fix for api disconnect detection. ( #2909 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 10:36:19 +01:00
Arturo Casal
88fbb0ffbb
Add sensor support: MAX44009 ( #3125 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:49:45 +01:00
Borys Pierov
231908fe9f
Implement text_sensor based on ble_client ( #3079 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:45:32 +01:00
ImSorryButWho
f137cc10f4
Remote magiquest protocol ( #2963 )
...
Co-authored-by: Aaron Hertz <aaron@rockforest.org>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-18 22:22:41 +01:00
Michael Labuschke
1a8f8adc2a
Read all cell voltages from DalyBMS ( #3203 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 11:00:03 +13:00
Jesse Hills
7a242bb4ed
Binary Sensor codegen tidyup ( #3217 )
2022-02-18 10:39:59 +13:00
Jesse Hills
3b8bb09ae3
Add class as first positional arg to sensor_schema ( #3216 )
2022-02-18 10:27:20 +13:00
Jesse Hills
140db85d21
Add LONG LONG flag for arduinojson ( #3212 )
2022-02-18 10:11:22 +13:00
mipa87
ccce4b19e8
Fix pm1006 polling component definition ( #3210 )
2022-02-17 21:47:31 +01:00
Adrián Panella
8cb9be7560
Analog threshold ( #3190 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 09:14:10 +13:00
Roi Tagar
958ad0d750
HttpRequestComponent::get_string - avoid copy ( #2988 )
2022-02-17 17:03:54 +13:00
wilberforce
36ddd9dd69
Simplify captive portal to compressed single page ( #2872 )
2022-02-17 17:02:10 +13:00
Felix Storm
38259c96c9
CAN bus: support bit mask for on_frame can_id ( #3196 )
2022-02-17 17:00:31 +13:00
Felix Storm
c054fb8a2c
CAN bus: read all queued messages ( #3194 )
2022-02-17 17:00:14 +13:00
Otto Winter
5a0b8328d8
ESP8266 early init for pins ( #3144 )
2022-02-17 16:59:46 +13:00
Jesse Hills
ffa19426d7
Remove redundant name from binary_sensor constructor ( #3213 )
2022-02-17 16:56:44 +13:00
Stewart
c123804294
Set entity-category to diagnostic for debug component ( #3209 )
...
Co-authored-by: Stewart Morgan <stewart@arnos-vale.net>
Co-authored-by: root <root@build.servers.arnos-vale.net>
2022-02-17 13:53:26 +13:00
Stewart
51cb5da7f0
Fix missed ARDUINO_VERSION_CODE to USE_ARDUINO_VERSION_CODE changes ( #3206 )
...
Co-authored-by: Stewart Morgan <stewart@arnos-vale.net>
2022-02-16 16:50:10 +01:00
Maurice Makaay
16dc7762f9
Fix strlcpy() uses to make long SSIDs and passwords work ( #3199 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-02-16 09:45:05 +13:00
Maurice Makaay
ce073a704b
Fix strlcpy() uses to make long SSIDs and passwords work ( #3199 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-02-16 08:54:21 +13:00
Guillermo Ruffino
113232ebb6
add sim800l diagnostics ( #3136 )
2022-02-15 17:01:50 +13:00
Jesse Hills
dcc80f9032
Allow framework version validator to be maximum version ( #3197 )
2022-02-15 12:00:12 +13:00
Otto Winter
dd554bcdf4
Make generating combined binary output verbose ( #3127 )
2022-02-15 12:00:12 +13:00
Jesse Hills
f376a39e55
Clamp rotary_encoder restored value to min and max ( #3184 )
2022-02-15 12:00:12 +13:00
Jesse Hills
a13a1225b7
Allow framework version validator to be maximum version ( #3197 )
2022-02-15 11:57:47 +13:00
Otto Winter
3a67884451
Improve dallas timing ( #3181 )
...
* Improve dallas timing
* Format
2022-02-11 09:06:06 +01:00
Otto Winter
72e716cdf1
Make generating combined binary output verbose ( #3127 )
2022-02-11 21:06:00 +13:00
Jesse Hills
40e06c9819
Raise minimum python version to 3.8 ( #3176 )
2022-02-10 09:55:11 +01:00
Jesse Hills
ad6c5ff11d
Clamp rotary_encoder restored value to min and max ( #3184 )
2022-02-09 23:12:05 +01:00
Otto Winter
2622e59b0b
Remove spurious Zeroconf instance from api client ( #3143 )
2022-02-09 14:57:00 +01:00
Jesse Hills
272d6f2a8b
Merge branch 'dev' into bump-2022.2.0b1
2022-02-09 23:47:36 +13:00
Borys Pierov
e7dd6c52ac
Allow to set manufacturer data for BLEAdvertising ( #3179 )
2022-02-09 23:29:32 +13:00
Jesse Hills
f43e04e15a
Try fix canbus config validation ( #3173 )
2022-02-09 11:42:00 +13:00
Jesse Hills
88d72f8c9a
Fix files CI after merging ( #3175 )
2022-02-09 08:04:44 +13:00
Andrej Komelj
9826726a72
Implement MQTT discovery object_id generator ( #3114 )
2022-02-08 22:58:38 +13:00
Jesse Hills
c66d0550e8
Inkplate 6 PLUS ( #3013 )
2022-02-08 22:56:56 +13:00
mckaymatthew
4aeacfd16e
Add max9611 High Side Current Shunt ADC ( #2705 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 22:56:40 +13:00
stegm
58fa63ad88
Add Select for modbus ( #3032 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-08 22:27:22 +13:00
Jesse Hills
94f944dc9c
Add Lilygo t5 4.7 Touchscreen ( #3084 )
2022-02-08 21:50:25 +13:00
Ashton Kemerling
116ddbdd01
Add require response option for BLE binary output ( #3091 )
2022-02-08 21:30:31 +13:00
Jesse Hills
1c0697b5d4
Dont warn on nonnull comparisons ( #3123 )
2022-02-08 21:28:12 +13:00
Otto Winter
434ca47ea0
Enable mDNS during OTA safe mode ( #3146 )
2022-02-08 21:21:52 +13:00
functionpointer
397ef72b16
MLX90393 three-axis magnetometer ( #2770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:42:11 +13:00
Jonas Bergler
7ca9245735
wifi_info, reduce polling interval ( #3165 )
...
Co-authored-by: Jonas Bergler <jbergler@meraki.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 20:27:39 +13:00
Jesse Hills
69856286e8
Text sensor schema generator similar to sensor ( #3172 )
2022-02-08 17:23:45 +13:00
Jeff Eberl
ad43d6a5bc
Added RadonEye RD200 Component ( #3119 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 16:32:37 +13:00
mknjc
1e5004f495
[debug] Refactor debug sensors to use the normal sensor model. ( #3162 )
2022-02-08 12:45:27 +13:00
Jesse Hills
ab47e201c7
Bump improv library to 1.2.1 ( #3160 )
2022-02-04 19:15:00 +13:00
Samuel Sieb
42984fa72a
Handle Tuya multi-datapoint messages ( #3159 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-02-04 15:50:42 +13:00
Franck Nijhof
e7864a28a1
Add device class support to Switch ( #3012 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-04 09:04:48 +13:00
Keilin Bickar
21803607e7
Add new Lock core component ( #2958 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-04 07:24:31 +13:00
dependabot[bot]
2b39988707
Bump black from 21.12b0 to 22.1.0 ( #3147 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-02-01 10:26:37 +01:00
Otto Winter
4de642ff28
Bump esp-idf framework version from 4.3.0 to 4.3.2 ( #3120 )
2022-01-31 07:59:56 +01:00
Jesse Hills
bf91443f38
Improv_serial scan and send wifi networks list ( #3116 )
2022-01-31 11:08:20 +13:00
Jesse Hills
4a5970b4af
Fix backwards string case helpers ( #3126 )
2022-01-31 10:58:27 +13:00
Matt Hamilton
0c3568fad5
Add support for Waveshare 7.5in-bv2 ( #3121 )
2022-01-29 00:37:47 +13:00
drug123
0f3d4d9a47
Add Xiaomi MHOC303 sensor e-ink clock ( #3115 )
2022-01-27 12:54:29 +13:00
Otto Winter
ad1f4429c9
Fix lint for TSL2591 ( #3118 )
2022-01-26 13:50:43 +01:00
Martin
7590d5eacb
set adc width to 13 bits for esp32-s2 ( #3117 )
2022-01-26 13:33:59 +01:00
Nicholas Peters
c5974b8833
TSL2591 automatic gain control ( #3071 )
2022-01-26 22:48:51 +13:00
Otto Winter
511c8de6f3
ESP8266 Set recommended framework to 3.0.2 ( #2606 )
2022-01-26 22:41:57 +13:00
Wouter van der Wal
a718ac7ee0
Add qr code support for displays ( #2952 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 22:20:45 +13:00
Jesse Hills
ef832becf1
Create base touchscreen component and refactor ektf2232 ( #3083 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 16:26:46 +13:00
micronen
3a62455948
Add Heap Sensors - free/max block/fragmentation ( #1578 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-01-25 19:18:41 +01:00
Zebble
297824e2d7
Add support for additional colors on GROW R503 ( #3087 )
2022-01-25 17:18:36 +01:00
Jimmy Hedman
d92f297bc0
Add IPv6 support for ESP-IDF framework ( #2953 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 09:55:33 +01:00
guillempages
7a0827e3d0
Configurable HTTP redirect following ( #3100 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 09:53:22 +01:00
Dav-id
1de941e837
Esp32cam full control ( #3090 )
2022-01-25 11:53:47 +13:00
Joshua Spence
28b65cb810
Perform merges when substituting dict keys ( #3062 )
2022-01-25 11:46:42 +13:00
Martin
6ff3942e8b
[TCS34725] remove duplicated endian conversion ( #3037 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-25 11:41:14 +13:00
Rebbe Pod
ef5d959788
Add increment_day function to ESPTime ( #2955 )
2022-01-24 21:54:46 +01:00
Oxan van Leeuwen
6a2c58fcc0
Implement output button ( #3109 )
2022-01-25 09:30:48 +13:00
Oxan van Leeuwen
80d03a631e
Force braces around multi-line statements ( #3094 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-25 08:56:36 +13:00
Martin
6b27f2d2cf
Remove unused polling_component_schema from modbus number ( #3108 )
2022-01-25 08:44:20 +13:00
Oxan van Leeuwen
cdda648360
Generate ARDUINO_VERSION_CODE in Python code ( #3101 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2022-01-24 10:34:34 +01:00
Oxan van Leeuwen
c2ee0f0864
Rename WEBSERVER_PORT define to USE_WEBSERVER_PORT ( #3102 )
2022-01-24 00:34:38 +01:00
Oxan van Leeuwen
2a84db7f85
Refactor fan platform to resemble climate/cover platforms ( #2848 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: rob-deutsch <robzyb+altgithub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 22:21:54 +13:00
VitaliyKurokhtin
8187a4bce9
Command retain option for MQTT component ( #3078 )
2022-01-23 21:05:37 +13:00
Oxan van Leeuwen
97681d142e
Enable readability-redundant-access-specifiers check ( #3096 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 20:47:22 +13:00
Oxan van Leeuwen
b2430097f2
Enable readability-named-parameter check ( #3098 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-23 20:39:07 +13:00
Oxan van Leeuwen
7da12a878f
Enable readability-redundant-member-init check ( #3097 )
2022-01-23 20:34:43 +13:00
Oxan van Leeuwen
a31700e16f
Enable readability-qualified-auto check ( #3095 )
2022-01-23 20:29:58 +13:00
Oxan van Leeuwen
7854522792
Enable readability-const-return-type check ( #3099 )
2022-01-23 20:28:00 +13:00
Pavel Skuratovich
a6a9ebfde2
slow_pwm: allow to restart a cycle on state change ( #3004 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-22 23:08:55 +01:00
Plácido Revilla
c6cbe2748e
Set the wrapped single light in light partition to internal ( #3092 )
2022-01-22 21:04:36 +01:00
Joshua Spence
f9a7f00843
Add restore_mode to fan component ( #3051 )
2022-01-22 20:41:58 +01:00
William Charlton
f0b183a552
Wake-on-LAN button ( #3030 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: William Charlton <will.charlton1@icloud.com>
2022-01-23 00:13:46 +13:00
Jesse Hills
338ada5c9f
Allow multiple configs for cd74hc4067 ( #3085 )
2022-01-22 19:33:15 +13:00
Jimmy Hedman
ef88f9923f
Implement IPv6 sockets for lwIP ( #3015 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-21 10:08:54 +01:00
Jesse Hills
6f8c7d9ec4
Add ektf2232 touchscreen support ( #3027 )
2022-01-21 15:45:49 +13:00
Jesse Hills
045952939e
Support simple transparent pngs for display ( #3035 )
2022-01-21 11:16:18 +13:00
Jesse Hills
1c51cac5ba
Add initial_run to regular lambda light effect ( #3059 )
2022-01-21 11:09:07 +13:00
buxtronix
ea11462e1e
AM43: autoload "sensor" to avoid compile errors ( #3077 )
2022-01-20 13:33:42 +01:00
Otto Winter
62f9736b1d
API: Expect a name for connections ( #2533 )
2022-01-20 12:03:32 +01:00
Jesse Hills
1f8a1f0046
Bump improv library version ( #3072 )
2022-01-20 15:21:44 +13:00
cwitting
172507acb5
Fix calibration parameter for bme680 humidity calculation ( #3069 )
2022-01-20 10:53:52 +13:00
Martin
434ab65c16
[modbus_controller] fix incorrect start address for number write ( #3073 )
2022-01-20 09:19:24 +13:00
Oxan van Leeuwen
869743a742
Fail hard if no random bytes available for encryption ( #3067 )
2022-01-18 15:49:31 +13:00
Martin
7b03e07908
[modbus_controller] add missing skip_updates ( #3063 )
2022-01-18 15:49:31 +13:00
Oxan van Leeuwen
737188ae50
Fail hard if no random bytes available for encryption ( #3067 )
2022-01-18 14:29:57 +13:00
Martin
cdb4fa2487
[modbus_controller] add missing skip_updates ( #3063 )
2022-01-18 09:05:13 +13:00
Jesse Hills
01b62a16c3
Add number setting to web_server/rest_api ( #3055 )
2022-01-17 12:40:07 +13:00
Oxan van Leeuwen
c5eba04517
Remove deprecated attribute from virtual entity methods ( #3056 )
2022-01-17 12:40:07 +13:00
Oxan van Leeuwen
282313ab52
Rename post_build scripts to fix codeowners script ( #3057 )
2022-01-17 12:40:07 +13:00
Jesse Hills
45ac577c4d
Add number setting to web_server/rest_api ( #3055 )
2022-01-17 12:31:44 +13:00
Oxan van Leeuwen
89e7448007
Remove deprecated attribute from virtual entity methods ( #3056 )
2022-01-16 23:40:15 +01:00
Oxan van Leeuwen
f44fca0a4b
Rename post_build scripts to fix codeowners script ( #3057 )
2022-01-17 11:15:11 +13:00
Jesse Hills
fe4a14e6cc
Merge branch 'dev' into bump-2022.1.0b1
2022-01-13 11:02:07 +13:00
Jesse Hills
c0ff899812
Generate basic config for esphome-web devices ( #3036 )
2022-01-12 19:37:56 +13:00
Martin
56547b3d50
[Modbus_controller] Fix duplicate cmd check ( #3031 )
2022-01-12 16:38:13 +13:00
Sympatron GmbH
5026bc7a78
Native ESP32 CAN support ( #1629 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-12 08:54:35 +13:00
Andreas Soehlke
27364ee72c
Add cd74hc4067 multiplexer ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: asoehlke <git@soehlke.de>
2022-01-11 16:59:57 +13:00
Jesse Hills
ece71a0228
Run post scripts for factory binaries for flashing ( #3003 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-11 15:24:26 +13:00
Oxan van Leeuwen
073828235f
Deprecate virtual methods to set entity properties ( #3021 )
2022-01-10 13:32:39 +01:00
Stefan Grufman
41bcc8c0f4
Nexa 433MHz RF protocol ( #2037 )
...
Co-authored-by: Stefan Grufman <stefan.grufman@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 23:35:39 +13:00
Chris Nussbaum
a0ea2aae6e
Add an action for pzemac to reset the total energy ( #2480 )
2022-01-10 23:13:39 +13:00
Jeffrey Borg
f34b46a621
Fix heatpumpir codegen min/max temperatures ( #3025 )
2022-01-10 16:48:05 +13:00
Lubos Horacek
7217a4f7a4
Fix display picture for nextion display ( #3018 )
2022-01-10 14:08:38 +13:00
Oxan van Leeuwen
6383eca54a
Clean-up random helper functions ( #3022 )
2022-01-10 13:50:26 +13:00
Martin
e55bd1e559
[Modbus_controller] Fix binary sensor lambda ( #3020 )
2022-01-10 12:29:29 +13:00
MiKuBB
9e8b701dea
Adding sdm_meter ability to report total power ( #2959 )
2022-01-10 12:23:01 +13:00
rsumner
a4431abea8
MCP3204 4-channel 12-bit ADC component ( #2895 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 12:04:48 +13:00
Kamil Trzciński
5844c1767b
Extend esp32_camera with requester to improve performance ( #2813 )
2022-01-10 11:58:49 +13:00
Sergey Dudanov
9a70bfa471
New Midea IR component, improvements and fixes ( #2847 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 11:47:19 +13:00
Valentin Ochs
b406c6403c
Create new kalman_combinator component ( #2965 )
2022-01-09 23:44:36 +01:00
Oxan van Leeuwen
499625f266
Convert is_callable to a backport of std::is_invocable ( #3023 )
2022-01-10 11:07:37 +13:00
Martin
6b773553fc
Add turn_on/off trigger to slow_pwm ( #2921 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-09 19:49:57 +01:00
Joshua Spence
15fe049a99
Add restore_mode to output switch ( #3016 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-09 19:47:00 +01:00
stegm
e4555f6997
Fix register ranges in modbus controller ( #2981 )
2022-01-09 16:24:23 +01:00
Jesse Hills
ea1be8e7bf
Add MCP47A1 DAC output ( #3014 )
2022-01-08 21:35:55 +13:00
stegm
84a830195f
Fix offset bug in modbus text sensor. ( #3006 )
2022-01-06 16:40:22 +01:00
Oxan van Leeuwen
07e790f900
Drop uint{32,64}_to_string() helper functions ( #3009 )
2022-01-06 16:36:11 +01:00
Oxan van Leeuwen
a4931f5d78
Clean-up reverse_bits helpers ( #3011 )
2022-01-07 00:54:58 +13:00
Martin
5e1e543b06
Add support for BMP388 / BMP 390 pressure and temperature sensor ( #2716 )
2022-01-06 15:01:50 +13:00
Pavel Skuratovich
df929f9445
Fix SlowPWM output switch at the end of period ( #2984 )
2022-01-05 21:31:11 +01:00
mknjc
3067e482fc
atc mithermometer: Add possibility to report signal strength ( #3000 )
2022-01-05 16:43:37 +13:00
Martin
ed5930e934
SGP40 - Reduce delay in measurement ( #2996 )
2022-01-05 10:05:19 +13:00
Gonzalo Paniagua Javier
c8f4fbb7dd
Honor user set values for col/row start for INITR_MINI_160X80. ( #2976 )
...
If the caller sets a value for colstart and/or rowstart when using the INITR_MINI_160X80 model, use those values instead of the default 24 and 0.
After this patch devices with a 160x80 TFT like the m5stick C can set row/col start (26, 1 for m5stick) and avoid garbage lines showing in the display.
2022-01-04 11:02:53 +01:00
Snōwball
c855bc31b4
Add bl0940 component used by e.g. tuya devices ( #1904 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:38:58 +01:00
Martin
b924b179ab
Modbus: add binary output ( #2931 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-04 10:19:18 +01:00
Jesse Hills
3df0fee3de
Dont validate baud_rate for sim800l platform ( #2945 )
2022-01-04 10:16:40 +01:00
Igor Scheller
26dd1f8532
Set UTF-8 encoding and version for prometheus /metrics ( #2993 )
2022-01-04 10:14:38 +01:00
Stefan Agner
15ce27992e
Support ISR based pulse counter on ESP32-C3 ( #2983 )
2022-01-04 11:06:43 +13:00
Oxan van Leeuwen
dbc2812022
Improve PSRAM support ( #2884 )
2022-01-04 10:35:15 +13:00
Martin
dce3713f12
Fix HTTPRequestComponent::get_string return value ( #2987 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 19:40:05 +01:00
Christopher Masto
f849d45bb6
Add logging for some Nextion errors that didn't have any ( #2957 )
2022-01-03 19:09:25 +01:00
arunderwood
8ad06fb9ea
Add SH1107_128x64 to the ssd1306 component ( #2967 )
2022-01-03 19:08:16 +01:00
Martin
45ebe51e4f
Modbus: fix response parsing error for coil write ( #2986 )
2022-01-03 18:28:28 +01:00
Martin
407661d56b
Fix compile error for idf projects with ArduinoJson 6 ( #2979 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-03 18:19:01 +01:00
Stefan Agner
a02d2e2e11
Explicitly use overloaded begin() for I2C master initialization ( #2978 )
...
Arduino 2.0.1 and newer support slave and master mode. The two modes
have a begin() method with different signature:
```
// Slave Begin
bool TwoWire::begin(uint8_t addr, int sdaPin, int sclPin, uint32_t frequency)
// Master Begin
bool TwoWire::begin(int sdaPin, int sclPin, uint32_t frequency)
```
Use type casting to make sure that overloaded method for master mode
is used.
2022-01-03 16:37:21 +01:00
Jesse Hills
33f17f75a0
Upgrade ArduinoJson to 6.18.5 and migrate code ( #2844 )
2022-01-01 22:31:43 +13:00
MrEditor97
23edb18d7e
INA260 Current and Power Sensor support ( #2788 )
2021-12-31 22:08:49 +13:00
arunderwood
07ff3a853f
Add pin aliases for featheresp32-s2 ( #2970 )
2021-12-31 20:11:28 +13:00
Sebastian Raff
2cf36bdb46
Fix switch log state if inverted ( #2960 )
2021-12-30 16:05:31 +13:00
Jesse Hills
fc0a6546a2
Only allow internal pins for dht sensor ( #2940 )
2021-12-30 13:58:47 +13:00
Jesse Hills
ffd4280d6c
Require arduino in webserver for better validation ( #2941 )
2021-12-30 13:58:46 +13:00
marsjan155
cb0677cafe
ST7920 ESP32 fix ( #2962 )
...
Co-authored-by: Marcin Depa <m.depa91@gmail.com>
2021-12-30 10:34:30 +13:00
Daniel Hyles
c6956527d1
Remove Content-Length header from camera snapshot response ( #2860 )
...
* Update camera_web_server.cpp
Removed the duplicated CONTENT_LENGTH header
* Update camera_web_server.cpp
* Update camera_web_server.cpp
2021-12-28 09:32:17 +13:00
Jesse Hills
b7aad39daf
Only allow internal pins for dht sensor ( #2940 )
2021-12-23 08:31:56 +13:00
Jesse Hills
cc5947467f
Require arduino in webserver for better validation ( #2941 )
2021-12-22 20:08:54 +13:00
George
e152f128c8
Change HDC1080 init instruction failure from error to warning ( #2927 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-22 15:35:01 +13:00
Jan Čermák
beb5f3dc9d
bang_bang: respect set cool- and heat-only modes ( #2926 )
2021-12-22 15:27:16 +13:00
Jesse Hills
f5c3b3446f
Support inkplate10 ( #2937 )
2021-12-22 12:56:52 +13:00
jsuanet
f431c7402f
Add shutdown and safe_mode button ( #2918 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-12-20 22:25:36 +01:00
Oxan van Leeuwen
9471df0a1b
Fix MQTT button press action ( #2917 )
2021-12-21 08:24:07 +13:00
Oxan van Leeuwen
6d39f64be7
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-21 08:24:07 +13:00
Oxan van Leeuwen
4907e6f6d7
Fix MQTT button press action ( #2917 )
2021-12-21 08:19:20 +13:00
Jonas De Kegel
1ccee86705
Fix tm1637 bootloop ( #2929 )
2021-12-20 18:06:04 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Frank Langtind
6ec9cfb044
Add Tuya Number support ( #2765 )
2021-12-20 14:35:10 +13:00
Benny de Leeuw
66e0ff8392
Add growatt modbus sensor ( #2922 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-20 14:30:23 +13:00
Martin
1fb0a7109d
Modbus: use multiply for publishing number ( #2916 )
2021-12-15 22:38:23 +13:00
wilberforce
386a5b6362
Allow button POST on press from web server ( #2913 )
2021-12-15 14:57:32 +13:00
Oxan van Leeuwen
e32a999cd0
Set text sensor state property to filter output ( #2893 )
2021-12-15 14:57:32 +13:00
sveip
192eb49589
ESP32 CAM add Automatic Exposure Control option ( #2892 )
...
Co-authored-by: Peter <psv@tsat.net>
Co-authored-by: Carlos Garcia Saura <CarlosGS@users.noreply.github.com>
2021-12-15 07:46:43 +13:00
Petr Vraník
5d70ff702b
quantile filter support ( #2900 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: pvranik <petr.vranik@mgm-tp.com>
2021-12-15 07:43:42 +13:00
wilberforce
45e346cf1b
Allow button POST on press from web server ( #2913 )
2021-12-14 15:08:01 +13:00
Oxan van Leeuwen
b3fb35783e
Set text sensor state property to filter output ( #2893 )
2021-12-13 15:21:09 +13:00
myhomeiot
a79c6aa9e0
Added access to ble_scan_result_evt_param as get_scan_result ( #2854 )
2021-12-13 13:08:18 +13:00
Martin
4bb58b2de9
Add gpio 12 to strapping pin list ( #2902 )
2021-12-13 11:03:08 +13:00
Jesse Hills
4e10881331
Log the actual value in modbus number ( #2901 )
2021-12-13 10:28:19 +13:00
Ben Owen
cec4a81e14
Add reset_duration option for waveshare epaper HAT rev 2.1 ( #1481 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-13 10:27:11 +13:00
Carlos Garcia Saura
da45923d05
Turn verbose a debug statement in bme280 ( #2906 )
2021-12-13 09:32:37 +13:00
Carlos Garcia Saura
31a61b598b
Reduce timing noise in duty_cycle ( #2881 )
2021-12-13 09:30:47 +13:00
tony
9c0506592b
Add light.on_state trigger ( #2868 )
2021-12-13 09:19:57 +13:00
Oxan van Leeuwen
beeb0c7c5a
Introduce hex parsing & formatting helper functions ( #2882 )
2021-12-13 09:15:23 +13:00
Martin
b2f05faee0
Move i2c scan to setup ( #2869 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-13 09:12:50 +13:00
Keith Burzinski
d504daef91
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 21:07:07 +13:00
Keith Burzinski
cf5193d3e5
Fix for two points setting when fan_only_cooling is disabled ( #2903 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Keith Burzinski <kburzinski@kbx-mbp2021.ad.kbx81.net>
2021-12-11 20:03:22 +13:00
Guillermo Ruffino
708b928c73
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:55:48 +13:00
Jesse Hills
649366ff44
Fix published state for modbus number ( #2894 )
2021-12-10 09:55:47 +13:00
Guillermo Ruffino
c490388e80
Modbus number/output use write single ( #2896 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
2021-12-10 09:44:43 +13:00
Jesse Hills
24ec5a6e9d
Fix published state for modbus number ( #2894 )
2021-12-10 09:32:34 +13:00
Carlos Garcia Saura
e763469af8
Feed watchdog while setting up OTA ( #2876 )
2021-12-08 12:58:14 +13:00
Oxan van Leeuwen
6fe4ff7f85
Drop len parameter from parse_number() ( #2883 )
2021-12-08 08:46:25 +13:00
Yuval Brik
2253d4bc16
Support different run duration for non-timer wakeup ( #2861 )
2021-12-06 23:30:27 +01:00
Carlos Garcia Saura
e5cc19de43
Feed watchdog while setting up OTA ( #2876 )
2021-12-06 23:26:06 +01:00
Jesse Hills
24874f4c3c
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-07 07:47:48 +13:00
Massimiliano Ravelli
a66e94a0b0
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-07 07:47:48 +13:00
Oxan van Leeuwen
56870ed4a8
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-07 07:47:48 +13:00
Martin
3ac720df47
SPS30 : fix i2c read size ( #2866 )
2021-12-07 07:47:48 +13:00
Carlos Garcia Saura
1bc757ad06
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-07 07:47:48 +13:00
Martin
f72abc6f3d
tlc59208f : fix compilation error ( #2867 )
2021-12-07 07:47:48 +13:00
Jesse Hills
49932747b3
Adopt using wifi secrets that should exist at this point ( #2874 )
2021-12-06 20:57:56 +13:00
Massimiliano Ravelli
71fe2f7ed3
Ignore already stopped dhcp for ethernet ( #2862 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-06 20:01:50 +13:00
Oxan van Leeuwen
ffc112c9d0
Don't disable idle task WDT when it's not enabled ( #2856 )
2021-12-06 20:01:14 +13:00
Oxan van Leeuwen
d3e48e296f
Fix MCP23x17 not disabling pullup after config change ( #2855 )
2021-12-06 19:59:50 +13:00
Martin
14f6ae75ea
SPS30 : fix i2c read size ( #2866 )
2021-12-06 19:58:26 +13:00
Carlos Garcia Saura
c84efe64d3
ADC: Turn verbose the debugging "got voltage" ( #2863 )
2021-12-06 19:56:53 +13:00
Martin
10e89a7dbb
tlc59208f : fix compilation error ( #2867 )
2021-12-06 19:54:46 +13:00
Oxan van Leeuwen
9dcd3d18a0
Update ota_component.cpp ( #2852 )
2021-12-03 07:54:34 +13:00
Oxan van Leeuwen
40c017fd54
Update ota_component.cpp ( #2852 )
2021-12-03 07:52:56 +13:00
Jesse Hills
36b355eb82
Merge branch 'dev' into bump-2021.12.0b1
2021-12-02 19:38:44 +13:00
Martin
9ca4e8f32a
modbus_controller: bugfix: enable overriding calculated register size ( #2845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-12-02 15:45:11 +13:00
Alexandre-Jacques St-Jacques
1b88b7a166
Fix wifi not working with manual_ip using esp-idf ( #2849 )
2021-12-02 15:33:48 +13:00
Paul Nicholls
caf352ff06
Tuya Cover improvements ( #2637 )
2021-12-02 15:26:56 +13:00
Oxan van Leeuwen
54106179a1
Set ESP32 watchdog to loop task ( #2846 )
2021-12-02 09:05:42 +13:00
Oxan van Leeuwen
607601b3a4
Enable a bunch of clang-tidy checks ( #2149 )
2021-12-02 09:03:51 +13:00
Oxan van Leeuwen
f58828cb82
Support setting manual_ip under networks option ( #2839 )
2021-12-02 08:55:27 +13:00
Leon Loopik
11330af05f
Expand uart invert feature to ESP8266 ( #1727 )
2021-12-01 20:31:04 +01:00
Mark Dietzer
24a5325db3
Declare arch_get_cpu_cycle_count for esp8266 as IRAM ( #2843 )
2021-12-01 10:01:15 +01:00
Yuval Brik
1ec3140759
ESP32 Deep Sleep: correct level value ( #2812 )
...
Upon registering for ESP32 deep sleep, DeepSleepComponent::begin_sleep
calculates the level value to wake up on.
As part of PR #2303 , the level was changed to be based on `inverted`
instead of `!inverted`:
Before:
1e8e471dec/esphome/components/deep_sleep/deep_sleep_component.cpp (L76)2b04152482/esphome/components/deep_sleep/deep_sleep_component.cpp (L80)#2644 .
[0]
https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/sleep_modes.html#_CPPv428esp_sleep_enable_ext0_wakeup10gpio_num_ti
2021-12-01 09:38:58 +01:00
Oxan van Leeuwen
cbc1334b8d
Fix compile warning in Tuya automations ( #2837 )
2021-12-01 17:11:21 +13:00
mechanarchy
08cbb97ec9
Allow Git credentials to be loaded from secrets ( #2825 )
2021-12-01 17:10:25 +13:00
Jesse Hills
d9513e5ff2
Number mode ( #2838 )
2021-12-01 08:11:38 +13:00
puuu
b5a0e8b2c0
Implement unit_of_measurement for number component ( #2804 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-30 16:20:59 +01:00
Jesse Hills
b32b918936
Button device class ( #2835 )
2021-11-30 16:18:21 +01:00
Carlos Garcia Saura
cd018ad3a5
Burst read for BME280, to reduce spurious spikes ( #2809 )
2021-11-30 16:12:52 +01:00
Adrián Panella
24dfecb6f0
cse7766: add energy sensor ( #2822 )
2021-11-30 16:08:00 +01:00
Keith Burzinski
556d071e7f
Fix 8266 SPI Clock Polarity Setting ( #2836 )
2021-11-30 19:30:45 +13:00
dentra
939fb313df
Tuya text_sensor and raw data usage ( #1812 )
2021-11-30 08:08:52 +13:00
Jesse Hills
b5639a6472
Add support for button entities ( #2824 )
2021-11-30 08:00:51 +13:00
definitio
f50e40e0b8
Fix custom mode_state_topic ( #2827 )
2021-11-29 18:09:09 +01:00
mechanarchy
6f07421911
Optionally show internal components on the web server ( #2627 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-29 16:52:20 +01:00
Maurice Makaay
adf48246a9
Improve DSMR read timeout handling ( #2699 )
2021-11-29 16:40:53 +01:00
Conclusio
a5fb036011
Add delay to improve stability ( #2793 )
2021-11-29 10:18:48 +13:00
Dave T
e55506f9db
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 10:18:48 +13:00
Carlos Garcia Saura
50ec1d0445
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
3d5e1d8d91
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 10:18:48 +13:00
Oxan van Leeuwen
db2128a344
Fix parsing numbers in Anova ( #2816 )
2021-11-29 10:18:48 +13:00
Conclusio
7afcb0fb04
Add delay to improve stability ( #2793 )
2021-11-29 08:13:42 +13:00
Dave T
10f830c3ef
Correct bitmask for third color (blue) scaling. ( #2817 )
2021-11-29 08:12:40 +13:00
Carlos Garcia Saura
7a5c3aa7ed
Fix compilation error for WPA enterprise in ESP-IDF ( #2815 )
2021-11-29 08:06:53 +13:00
Oxan van Leeuwen
2b50406856
Fix parsing of multiple values in EZO sensor ( #2814 )
...
Co-authored-by: Lydia Sevelt <LydiaSevelt@gmail.com>
2021-11-29 08:02:10 +13:00
Oxan van Leeuwen
10a2a7e0fc
Fix parsing numbers in Anova ( #2816 )
2021-11-29 08:00:29 +13:00
Maurice Makaay
57a029189c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-27 21:13:01 +13:00
Maurice Makaay
671d68bc2c
Add missing nvs_flash_init() to ESP32 preferences code ( #2805 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-11-26 21:25:58 +01:00
Oxan van Leeuwen
5946c37925
Fix usage of deprecated climate method in anova ( #2801 )
2021-11-26 09:16:39 +01:00
Martin
17a37b1de9
Modbus_controller: Add custom command. ( #2680 )
2021-11-26 12:48:52 +13:00
Adrián Panella
e7827a6997
total_daily_energy: allow to disable restore mode ( #2795 )
2021-11-25 22:35:36 +01:00
Oxan van Leeuwen
9681dfb458
Correct constant for dynamic I2S bus in NeoPixelBus ( #2797 )
2021-11-26 09:37:27 +13:00
Oxan van Leeuwen
b5f660398c
Add map filter for text sensors ( #2761 )
2021-11-26 09:35:33 +13:00
Oxan van Leeuwen
8e1c9f5042
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:02:54 +13:00
Samuel Sieb
980b7cda8f
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-26 09:02:53 +13:00
Kamil Trzciński
3a72dd5cb6
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-26 09:02:53 +13:00
Dave T
3178243811
Fix frame scaling for animated gifs ( #2750 )
2021-11-26 09:02:53 +13:00
Maurice Makaay
d30e2f2a4f
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-26 09:02:53 +13:00
Oxan van Leeuwen
3637be251e
Fix parsing numbers from null-terminated buffers ( #2755 )
2021-11-26 09:00:49 +13:00
Maurice Makaay
ceb9b1d1ff
Allow empty UART debug: option, logging in hex format by default ( #2771 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-25 11:51:56 +13:00
Martin
ccfa1e23f0
Add support for sdp8xx ( #2779 )
2021-11-25 11:28:19 +13:00
rsumner
290da8df2d
Fix LEDC resolution calculation on ESP32-C3/S2/S3 ( #2794 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-25 11:22:51 +13:00
Martin
4b1d73791d
remove LEDC_HIGH_SPEED_MODE for C3, S2, S3 ( #2791 )
2021-11-25 08:06:08 +13:00
Maurice Makaay
15cd602e8b
Add support for P1 Data Request pin control ( #2676 )
2021-11-23 09:34:10 +01:00
krunkel
598f5b241f
Remove unnecessary write in AHT10 update ( #2675 )
2021-11-23 09:26:16 +01:00
Andreas Hergert
710096b1c6
Fixed wrong setup of tc9548a ( #2766 )
2021-11-23 09:20:55 +01:00
Dave T
07b882c801
Fix distorted gif frames when resizing ( #2774 )
2021-11-23 09:20:36 +01:00
cvwillegen
3e5331a263
Prettier date time display after time sync ( #2778 )
2021-11-23 09:20:20 +01:00
Samuel Sieb
1424091ee5
Remove floating point ops from the ISR ( #2751 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2021-11-22 12:11:36 +13:00
Kamil Trzciński
61ec16cdfc
esp32_camera_web_server: Improve support for MotionEye ( #2777 )
2021-11-22 12:09:11 +13:00
Dave T
e5cb5756aa
Fix frame scaling for animated gifs ( #2750 )
2021-11-18 23:20:32 +01:00
Maurice Makaay
9e1c3e8f01
Allow UART debug configuration with no after: definition ( #2753 )
2021-11-18 22:41:26 +01:00
Martin
8267f01ccd
Remove arduino dependency from hm3301 ( #2745 )
2021-11-18 08:03:46 +13:00
Sergey V. DUDANOV
6f9439e1bc
Fix byte order in NEC protocol implementation ( #2534 )
2021-11-17 18:35:50 +01:00
spattinson
06994c0dfc
Change LUT for ttgo t5 2.13inch to improve partial refresh ( #2475 )
2021-11-17 18:28:36 +01:00
Maurice Makaay
dee5d639e2
Add max_telegram_length option to dsmr ( #2674 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-17 18:24:02 +01:00
Jesse Hills
df6730be55
Move to use improv lib from platformio ( #2741 )
2021-11-17 18:23:17 +01:00
Franck Nijhof
8294d10d5b
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:31:38 +13:00
Evgeny
67558bec47
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 23:31:38 +13:00
Franck Nijhof
6c1ef398bb
Re-instate device class update for binary sensors ( #2743 )
2021-11-17 23:28:31 +13:00
Evgeny
0469e19f54
Fix HM3301 AQI index calculator ( #2739 )
2021-11-17 09:52:40 +01:00
Jesse Hills
dbcfa7b599
Remove duplicated const data in esp8266 boards ( #2740 )
2021-11-17 16:22:38 +13:00
rotarykite
c41547fd4a
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 08:00:26 +13:00
Ryan Hoffman
0d47d41c85
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-17 08:00:26 +13:00
rotarykite
df68403b6d
Fix senseair component uart read timeout ( #2658 )
...
Co-authored-by: DAVe3283 <DAVe3283+GitHub@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Chua Jun Chieh <junchieh.chua@softspace.com.my>
2021-11-17 07:57:03 +13:00
Ryan Hoffman
57bdc2b885
Add ble_client binary_output ( #2200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-17 07:30:42 +13:00
Ryan Hoffman
f565ff5def
Use as_reversed_hex_array in ble_sensor to fix UUID parsing ( #2737 )
...
#1627 renamed as_hex_array to as_reversed_hex_array but forgot to rename these users.
2021-11-16 18:53:36 +01:00
H. Árkosi Róbert
8ece639987
Change log level from DEBUG to INFO for sniffing services ( #2736 )
...
Sniffing for codes only happens if the user deliberately asked for it with the related service through HA - to find out the codes present in the air. The resulted data shouldn't be printed out only in debug mode, as this is information required to be known on demand for later use, not actually a debug info. Changing log level from DEBUG to INFO for sniffing services has two benefits:
- no need to run firmware with DEBUG enabled for occasional sniffing with devices in production (no need to flash back and forth with different log levels set just for this reason)
- if the user still wants DEBUG enabled, sniffed data appears in different color, it's easier to find between the lines.
2021-11-16 23:28:12 +13:00
Jan Harkes
b35f509784
Allow for subsecond sampling of hmc5883l ( #2735 )
2021-11-16 09:16:43 +01:00
Jesse Hills
b0a0a153f3
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:05:51 +13:00
Jesse Hills
9e4fa5dcf1
Improv serial/checksum changes ( #2731 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-16 11:02:45 +13:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Alexandre-Jacques St-Jacques
09e8782318
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 12:02:18 +13:00
Alexandre-Jacques St-Jacques
0b193eee43
Remove unnecessary duplicate touch_pad_filter_start ( #2724 )
2021-11-15 11:58:22 +13:00
Jesse Hills
fea3c48098
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 11:03:39 +13:00
Sergey V. DUDANOV
c2f57baec2
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 11:03:39 +13:00
Oxan van Leeuwen
f4a140e126
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 11:03:39 +13:00
Krzysztof Białek
87e1cdeedb
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-15 11:03:39 +13:00
Jesse Hills
81a36146ef
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-15 11:03:39 +13:00
Jesse Hills
7333123ba4
Fix indentation of write_lambda for modbus_controller number ( #2722 )
2021-11-15 10:59:48 +13:00
Sergey V. DUDANOV
d99c5ed890
RemoteTransmitter fix. Bug from version 2021.10. Some changes. ( #2706 )
2021-11-15 10:40:35 +13:00
Oxan van Leeuwen
6a7440f7d3
Feed WDT between doing ESP32 touchpad measurements ( #2720 )
2021-11-15 09:45:25 +13:00
Maurice Makaay
108b8e6705
Fix rom/rtc.h deprecation compile warning for debug component ( #2520 )
2021-11-14 16:17:13 +01:00
Clifford Roche
4eaa6afa4d
Add greeyac protocol to IR Climate / HeatpumpIR ( #2694 )
2021-11-14 16:11:21 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
NeoAcheron
582567696e
pmsx003: add support for PMS5003S device ( #2710 )
2021-11-13 15:14:23 +01:00
Jesse Hills
2e0c89409d
Bump ESPAsyncWebServer to 2.1.0 ( #2686 )
2021-11-13 21:22:32 +13:00
lcavalli
b526155cce
Update device classes for binary sensors ( #2703 )
2021-11-12 16:12:31 +13:00
Jesse Hills
62c3f301e7
Only allow prometheus when using arduino ( #2697 )
2021-11-12 16:12:31 +13:00
Jesse Hills
38cb988809
Remove my.ha links from improv ( #2695 )
2021-11-12 16:12:31 +13:00
lcavalli
7bb7456a8b
Update device classes for binary sensors ( #2703 )
2021-11-12 13:17:10 +13:00
Jesse Hills
a6873c1520
Only allow prometheus when using arduino ( #2697 )
2021-11-11 10:56:35 +01:00
Jesse Hills
f11220da3a
Remove my.ha links from improv ( #2695 )
2021-11-11 15:15:37 +13:00
Oxan van Leeuwen
b4cd8d21a5
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 12:25:41 +13:00
Maurice Makaay
7552893311
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 12:25:41 +13:00
Carlos Garcia Saura
21c896d8f8
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 12:25:40 +13:00
Jesse Hills
4b7fe202ec
Fix template number initial value being NaN ( #2692 )
2021-11-11 12:25:40 +13:00
Oxan van Leeuwen
bb9793d5b7
Enable addressable light power supply based on raw values ( #2690 )
2021-11-11 11:53:25 +13:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Carlos Garcia Saura
abf3708cc2
[remote_transmitter] accurate pulse timing for ESP8266 ( #2476 )
2021-11-11 11:28:45 +13:00
Jesse Hills
4395d6156d
Fix template number initial value being NaN ( #2692 )
2021-11-10 23:24:48 +01:00
Jesse Hills
8cbb379898
Remove import (not sure how it got there)
2021-11-11 10:35:18 +13:00
Jesse Hills
19970729a9
Merge branch 'dev' into bump-2021.11.0b1
2021-11-11 10:10:04 +13:00
anatoly-savchenkov
f310cacd41
[ms5611] Re-implement conversion from ADC readings to sensor values ( #2665 )
2021-11-10 22:01:47 +01:00
Jesse Hills
5ff7c8418c
Implement Improv via Serial component ( #2423 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-11-11 08:55:45 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Oxan van Leeuwen
99c775d8cb
Introduce encode_value/decode_value() template functions ( #2662 )
2021-11-10 19:44:01 +01:00
Oxan van Leeuwen
4d43396835
Clean-up string sanitation helpers ( #2660 )
2021-11-10 19:42:41 +01:00
TVDLoewe
92321e219a
Max7219digit multiline ( #1622 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 07:41:04 +13:00
Oxan van Leeuwen
c422b2fb0b
Introduce byteswap helpers ( #2661 )
...
* Backport std::byteswap() in helpers.h
* Introduce convert_big_endian() function
* Use convert_big_endian() in i2c byte swap functions
2021-11-10 19:40:18 +01:00
Otto Winter
8aa72f4c1e
Neopixelbus redo method definitions ( #2616 )
2021-11-11 07:35:31 +13:00
Oxan van Leeuwen
15f9677d33
Introduce parse_number() helper function ( #2659 )
2021-11-11 07:15:06 +13:00
Carlos Garcia Saura
219b225ac0
[ESP32 ADC] Add option for raw uncalibrated output ( #2663 )
2021-11-10 19:12:57 +01:00
Oxan van Leeuwen
2ac232e634
Add missing hal.h include in esp32_camera_web_server ( #2689 )
2021-11-10 19:09:10 +01:00
Sam Hughes
710866ff4e
CAP1188 Capacitive Touch Sensor Support ( #2653 )
2021-11-10 18:52:49 +01:00
Martin
662773b075
modbus_controller: remove hard coded register size ( #2654 )
2021-11-10 16:24:44 +13:00
Carlos Garcia Saura
875b803483
Remove "delay_microseconds_accurate()" and improve systemwide delayMicroseconds() ( #2497 )
2021-11-10 16:22:00 +13:00
Guillermo Ruffino
6e5cfac927
fix rc switch protocol 6 ( #2672 )
2021-11-10 16:15:15 +13:00
Duncan Findlay
97eaf3d4a1
Set up output_switch at priority DATA instead of HARDWARE. ( #2648 )
2021-11-10 16:12:20 +13:00
cvwillegen
366552a969
Remote base add pronto protocol ( #2619 )
2021-11-10 16:11:35 +13:00
Guillermo Ruffino
57b07441a1
fix esp32 rmt receiver item array length ( #2671 )
2021-11-10 13:15:02 +13:00
Kamil Trzciński
fb57ab0add
Add esp32_camera_web_server: to expose mjpg/jpg images ( #2237 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-10 13:10:07 +13:00
Jesse Hills
d6717c0032
Fix dashboard imports for adoption ( #2684 )
2021-11-10 08:38:20 +13:00
ychieux
f72389147d
SSD1306_base: Add support for 64x32 size and fix flip functions ( #2682 )
...
* Add support for SSD1306 OLED display 0.42inch 64x32 and fix a typo in __init__.py preventing flip functions to operate as intended
* convert tab to spaces
* fix typo on filename for __init__.py
2021-11-09 18:47:19 +01:00
Martin
add484a2ea
Fix gpio validation for esp32 variants ( #2609 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-09 07:29:28 +13:00
Paul Monigatti
a17a6d5346
Add HA Entity Category support to MQTT ( #2678 )
2021-11-08 10:03:30 +01:00
Maurice Makaay
be9439f10d
Fix for encrypted DSMR regression ( #2679 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-07 20:39:16 -03:00
Maurice Makaay
96a50f5c6b
Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino ( #2677 )
...
* Add SPI lib for ESP8266 and only add lib for ESP32 when using Arduino
* Make inclusion of the SPI library unconditional
As suggested by @Oxan. Because the component requires Arduino anyway, there is no need to make the inclusion conditional.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Fix Python lint issue
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-07 19:31:41 +01:00
Jesse Hills
3c0414c420
Add Entity categories for Home Assistant ( #2636 )
2021-11-08 07:24:52 +13:00
Maurice Makaay
b450d4c734
Fix CRC error during DSMR chunked message reading ( #2622 )
...
* DSMR chunk size from 50 to 500
* Still a few CRC errors with 500, upping to 1024.
* Adding timers to measure how long processing DSMR takes
* Handle chunked output from smart meter.
* Cleaning up and commenting the new chunk handling code
* Remove debug code.
* Fixing clang-tidy issues.
* Implementing chunked reading support for encrypted telegrams.
* Remove redundant extra delay for encrypted reader
* Beware not to flush crypted telegram headers
* Use insane data timeout for testing
* Improve logging
* Make clang-tidy happy
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-11-06 18:52:04 -03:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
niklasweber
379c3e98f5
Add restore_mode to rotary_encoder ( #2643 )
2021-11-03 07:32:24 +13:00
Carlos Garcia Saura
d54b4e7c44
Fix for noise in pulse_counter and duty_cycle components ( #2646 )
2021-11-02 08:27:57 +13:00
Jesse Hills
d8b3af3815
Expose webserver_port to the native API ( #2640 )
2021-11-01 09:33:04 +13:00
Otto Winter
2b04152482
Fix deep sleep invert_wakeup mode ( #2644 )
2021-10-31 16:07:06 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Geoffrey Van Landeghem
7eee3cdc7f
convert SCD30 into Component, polls dataready register ( #2308 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-10-31 15:29:22 +13:00
Ed
696643d037
BH1750: Fix a too high default H-res2 mode value ( #2536 )
2021-10-29 11:51:57 +13:00
Arturo Casal
77dbf84e55
Add support for CSE7761 sensor ( #2546 )
...
* Add CSE7761 sensor support
* CSE7761: Added test at test3.yaml
* CSE7761: changed string style
* CSE7761: fixed cpp lint
* CSE7761: Added codeowners
* Lots of code cleanup
* Revert incorrect setup_priority suggestion
* Added error log in read with retries.
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Improved log messages
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-28 20:58:48 +02:00
Martin
2350c5054c
use update_interval for sntp synchronization ( #2563 )
...
* use update_interval for sntp synchronization
* revert override of default interval
2021-10-28 20:57:39 +02:00
Jesse Hills
73accf747f
Allow cloning/fetching Github PR branches in external_components ( #2639 )
2021-10-29 07:12:05 +13:00
Sean Brogan
2147bcbc29
Remove autoload of xiaomi_ble and ruuvi_ble ( #2617 )
2021-10-28 09:16:12 +13:00
niklasweber
980c2d4cae
Add publish_initial_value option to rotary encoder ( #2503 )
2021-10-28 08:09:37 +13:00
Jesse Hills
c2623a08e3
Fix select.set using lambda ( #2633 )
2021-10-27 08:27:51 +13:00
Jan Čermák
9f625ee7d1
Fix pin number validation for sn74hc595 ( #2621 )
2021-10-26 18:10:45 +02:00
Martin
2f85c27a05
fix modbus output ( #2630 )
2021-10-26 11:30:25 +02:00
Jesse Hills
a01f5f5cf1
Remove power and energy from sensors that are not true power ( #2628 )
2021-10-26 10:55:20 +02:00
Oxan van Leeuwen
87328686a0
Allow setting URL as platform_version ( #2598 )
2021-10-26 10:55:09 +02:00
Martin
81c11ba1f7
relax max entities checking ( #2629 )
2021-10-26 08:53:47 +13:00
Otto Winter
de06a781ff
ESP8266 disable PIO LDF ( #2608 )
2021-10-23 19:44:55 +02:00
0hax
a687b083ae
Teleinfo ptec ( #2599 )
...
* teleinfo: handle historical mode correctly.
In historical mode, tags like PTEC leads to an issue where we detect a
timestamp wheras this is not possible in historical mode.
PTEC teleinfo tag looks like:
PTEC HP..
Instead of the usual format
IINST1 001 I
This make our data parsing fails.
While at here, make sure we continue parsing other tags even if parsing
one of the tag fails.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: fix compilation with loglevel set to debug.
Signed-off-by: 0hax <0hax@protonmail.com>
2021-10-23 19:01:23 +02:00
Otto Winter
d85b7a6bd0
Bump platform-espressif8266 from 2.6.2 to 2.6.3 ( #2620 )
2021-10-23 12:37:50 +02:00
Andreas Hergert
1c4700f447
fixed dependency for pca9685 component ( #2614 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Andreas <andreas.hergert@otrs.com>
2021-10-22 18:52:47 +02:00
Andreas Hergert
83400d0417
Bugfix tca9548a and idf refactor anh ( #2612 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
2021-10-22 18:20:57 +02:00
Otto Winter
77a6461c9d
Fix ESP8266 OTA compression only starting framework v2.7.0 ( #2610 )
2021-10-22 17:23:31 +02:00
Otto Winter
6db9d1122f
Fix compiler warnings and update platformio line filter ( #2607 )
2021-10-22 16:52:43 +02:00
Otto Winter
83bef85415
Add owner to all libraries used ( #2604 )
2021-10-22 14:14:14 +02:00
Otto Winter
0d90ef94ae
Add OTA upload compression for ESP8266 ( #2601 )
2021-10-22 13:02:55 +02:00
Otto Winter
c08b21b7cd
Bump noise-c from 0.1.3 to 0.1.4 ( #2602 )
2021-10-22 12:12:07 +02:00
Paul Monigatti
be3cb9ef00
Add EntityBase properties to ESP32 Camera ( #2600 )
2021-10-22 12:10:29 +02:00
Otto Winter
9220d9fc52
Fix socket connection closed not detected ( #2587 )
2021-10-22 10:46:44 +02:00
Otto Winter
68c8547067
Add IDF support to dallas ( #2578 )
2021-10-21 22:48:28 +02:00
dependabot[bot]
1468acfced
Bump tzlocal from 3.0 to 4.0.1 ( #2553 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-21 22:46:05 +02:00
Oxan van Leeuwen
07a9cb910f
Fix validation of addressable light IDs ( #2588 )
2021-10-21 20:07:37 +02:00
Oxan van Leeuwen
c0fc5b48ae
Fix pin/component switchup in SX1509 pin configuration ( #2593 )
2021-10-21 19:55:19 +02:00
Oxan van Leeuwen
8735d3b83e
Fix PlatformIO version for latest Arduino framework ( #2590 )
2021-10-21 18:59:49 +02:00
Otto Winter
eccdef8211
Fix mDNS ESP8266 log not included ( #2589 )
2021-10-21 18:53:08 +02:00
Maurice Makaay
f2ebfe7aef
Add mDNS config dump ( #2576 )
2021-10-21 16:02:28 +02:00
Otto Winter
cac5b356db
ESP32 ADC use factory calibration data ( #2574 )
2021-10-21 16:01:33 +02:00
Otto Winter
c615dc573a
Fix ESP8266 dallas GPIO16 INPUT_PULLUP ( #2581 )
2021-10-21 14:39:36 +02:00
Otto Winter
1caabb6419
Fix ESP8266 OTA adds unnecessary Update library ( #2579 )
2021-10-21 14:20:57 +02:00
Otto Winter
e39f314e7a
Fix wifi ble coexistence check ( #2573 )
2021-10-21 12:24:01 +02:00
Otto Winter
7f34561e53
Fix ESP8266 GPIO0 Pullup Validation ( #2572 )
2021-10-21 12:23:37 +02:00
Maurice Makaay
34606b0f1f
Fix MDNS for ESP8266 devices ( #2571 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-21 12:23:21 +02:00
Otto Winter
3af297aa76
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:32:27 +13:00
Jesse Hills
dad244fb7a
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 07:31:55 +13:00
Otto Winter
15b5968418
Revert nextion clang-tidy changes ( #2566 )
2021-10-21 07:31:13 +13:00
Jesse Hills
e4d17e0b15
A few esp32_ble_server/improv fixes ( #2562 )
2021-10-21 06:45:10 +13:00
Carlos Garcia Saura
e79f7ce290
[ESP32] ADC auto-range setting ( #2541 )
2021-10-20 19:44:51 +02:00
Martin
1b0e60374b
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:14:30 +13:00
Oxan van Leeuwen
3a760fbb44
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-20 10:14:30 +13:00
Martin
f5441a87e3
ignore exception when not waiting for a response ( #2552 )
2021-10-20 10:10:24 +13:00
Oxan van Leeuwen
5b5ead872b
Fix ADC pin validation on ESP32-C3 ( #2551 )
2021-10-19 12:56:49 +02:00
Maurice Makaay
4a1e50fed1
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-18 21:26:36 +13:00
Oxan van Leeuwen
723fb7eaac
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 15:31:01 +13:00
Jesse Hills
63a9acaa19
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 15:31:00 +13:00
Jesse Hills
0524f8c677
Fix const used for IDF recommended version ( #2542 )
2021-10-18 15:31:00 +13:00
Oxan van Leeuwen
ced11bc707
Autodetect ESP32 variant ( #2530 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-18 13:36:18 +13:00
Jesse Hills
6b9c084162
Fix Bluetooth setup_priorities ( #2458 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-18 09:56:31 +13:00
Jesse Hills
644ce2a26c
Fix const used for IDF recommended version ( #2542 )
2021-10-18 09:55:35 +13:00
Oxan van Leeuwen
f83950fd75
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 20:28:43 +13:00
Oxan van Leeuwen
4dd1bf920d
Replace framework version_hint with source option ( #2529 )
2021-10-17 20:28:43 +13:00
Martin
98755f3621
Fix bug in register name definition ( #2526 )
2021-10-17 20:28:43 +13:00
Keith Burzinski
c3a8a044b9
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-17 20:28:42 +13:00
Martin
15b5ea43a7
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-17 20:28:42 +13:00
Oxan van Leeuwen
65d2b37496
Fix bitshift on read in ADE7953 ( #2537 )
2021-10-17 19:53:49 +13:00
Oxan van Leeuwen
94d518a418
Replace framework version_hint with source option ( #2529 )
2021-10-15 22:07:05 +02:00
Carlos Garcia Saura
7cca673902
[esp-idf fix] increase FreeRTOS ticker loop from 100Hz to 1kHz ( #2527 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-15 22:06:49 +02:00
Maurice Makaay
384f8d97d8
OTA firmware MD5 check + password support for esp-idf ( #2507 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-15 22:06:32 +02:00
Oxan van Leeuwen
c82d5d63e3
Move TemplatableValue helper class to automation.h ( #2511 )
2021-10-15 22:05:11 +02:00
dependabot[bot]
653a3d5d11
Bump aioesphomeapi from 9.1.5 to 10.0.0 ( #2508 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-15 22:05:04 +02:00
Tom Matheussen
884b7201de
Continue ethernet setup if hostname fails ( #2430 )
2021-10-15 20:46:58 +02:00
Dmitriy Lopatko
dc15d1c8ec
use no hold master mode for si7021/htu21d ( #2528 )
2021-10-15 16:52:03 +02:00
Martin
6beb9e568a
Fix bug in register name definition ( #2526 )
2021-10-15 20:27:56 +13:00
Keith Burzinski
7178f10bda
Fix Nextion HTTPClient error for ESP32 ( #2524 )
2021-10-15 20:26:26 +13:00
Oxan van Leeuwen
73940bc1bd
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
9b7fb829f9
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-15 09:42:43 +13:00
Dmitriy Lopatko
c51d8c9021
add missing include in sgp30 ( #2517 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
d8a6dfe5ce
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
5f7cef0b06
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-15 09:42:43 +13:00
Paul Monigatti
48ff2ffc68
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
b3b9ccd314
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-15 09:42:43 +13:00
Oxan van Leeuwen
63d6b610b8
Don't define UART_SELECTION_UART2 when UART2 is unavailable ( #2512 )
2021-10-14 11:25:10 +02:00
Martin
8823024509
Add pressure compensation during runtime ( #2493 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-14 11:24:57 +02:00
Paul Monigatti
4896f870f0
Fix: Color modes not being correctly used in light partitions ( #2513 )
2021-10-14 21:04:50 +13:00
Dmitriy Lopatko
7e482901d9
add missing include in sgp30 ( #2517 )
2021-10-14 21:00:53 +13:00
Paul Monigatti
07b309e65d
Fix BME680_BSEC compilation issue with ESP32 ( #2516 )
2021-10-14 20:58:35 +13:00
Oxan van Leeuwen
6bbb5e9b56
Disallow using UART2 for logger on ESP-32 variants that lack it ( #2510 )
2021-10-14 09:21:43 +13:00
Paul Monigatti
867fecd157
Fix: Light flash not restoring previous LightState ( #2383 )
...
* Update light state when transformer has finished
* Revert writing direct to output
* Correct handling of zero-length light transformers
* Allow transformers to handle zero-length transitions, and check more boundary conditions when transitioning back to start state
* Removed log.h
* Fixed race condition between LightFlashTransformer.apply() and is_finished()
* clang-format
* Step progress from 0.0f to 1.0f at t=start_time for zero-length transforms to avoid divide-by-zero
2021-10-13 21:59:52 +02:00
Oxan van Leeuwen
05388d2dfc
Fix light state remaining on after turn off with transition ( #2509 )
2021-10-14 08:53:00 +13:00
razorback16
534ce11d54
TCS34725 BugFix and GA factor ( #2445 )
...
- Fixed endianness bug on tcs34725 data read
- Fixed lux adjustments based on gain, integration time and GA factor
- Added glass attenuation factor to allow using this sensor behind
semi transparent glass
Co-authored-by: Razorback16 <razorback16@users.noreply.github.com>
2021-10-13 18:45:41 +02:00
Jesse Hills
bb86db869a
Fix bad merge
2021-10-13 22:09:38 +13:00
Jesse Hills
4c4dd23e15
Merge branch 'release' into dev
2021-10-13 22:05:18 +13:00
Sergio Mayoral Martínez
3dee057826
Add throttle_average sensor filter ( #2485 )
2021-10-13 11:35:30 +13:00
Jesse Hills
4406a08fa7
Allow multiple pn532_spi entries ( #2489 )
2021-10-13 09:06:52 +13:00
Rafael Treviño
c33077bc61
Improves ct_clamp component accuracy ( #2283 )
...
Co-authored-by: Rafa Treviño <rafael.trevino@bbva.com>
2021-10-13 08:42:51 +13:00
Rob Deutsch
a3eb2a7ee0
Added heatpumpir support ( #1343 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-13 07:38:19 +13:00
Maurice Makaay
d13134135b
Fix LoadProhibited crash for logger baud_rate 0 ( #2498 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-12 13:51:41 +02:00
Chris Nussbaum
b4f57972fb
Add on_open and on_closed triggers to cover ( #2488 )
2021-10-12 15:39:21 +13:00
Jesse Hills
6a5eb43454
Update Airthings BLE ( #2453 )
2021-10-12 11:56:47 +13:00
Dave T
04ec1c8b56
Consolidate CONF_RAW_DATA_ID to const.py ( #2491 )
2021-10-12 00:14:04 +02:00
niklasweber
d7ad155885
Fix reset on http_request without network connection ( #2474 )
...
* Fix reset problem when http_request is sent without network connection (#2501 )
* Fix format
2021-10-12 00:11:04 +02:00
Jan Čermák
85461a752a
Fix color temperature persistence on CWWW lights ( #2486 )
2021-10-11 23:56:35 +02:00
Dave T
039fbc677d
Replace deprecated COLOR_BLACK constant ( #2487 )
2021-10-11 23:44:05 +02:00
Jesse Hills
2c517e3e8c
Use arduino btStart for arduino framework ( #2457 )
2021-10-11 10:38:45 +13:00
definitio
42739f0b22
Add configuration for climate topics ( #2473 )
2021-10-10 17:55:22 +02:00
definitio
a1f9b0d7f2
Add configuration for cover topics ( #2472 )
2021-10-10 17:54:07 +02:00
Chris Nussbaum
c3b8c84131
Fix below freezing temperature for Inkbird sensors ( #2466 )
2021-10-10 10:53:58 +02:00
Paul Monigatti
471b82f727
EntityBase Refactor ( #2418 )
...
* Renamed Nameable to EntityBase (cpp)
* Renamed NAMEABLE_SCHEMA to ENTITY_BASE_SCHEMA (Python)
* Renamed cg.Nameable to cg.EntityBase (Python)
* Remove redundant use of CONF_NAME from esp32_touch
* Remove redundant use of CONF_NAME from mcp3008
* Updated test
* Moved EntityBase from Component.h and Component.cpp
* Added icon property to EntityBase
* Added CONF_ICON to ENTITY_BASE_SCHEMA and added setup_entity function to cpp_helpers
* Added MQTT component getters for icon and disabled_by_default
* Lint
* Removed icon field from MQTT components
* Code generation now uses setup_entity to setENTITY_BASE_SCHEMA fields
* Removed unused import
* Added cstdint include
* Optimisation: don't set icon if it is empty
* Remove icon from NumberTraits and SelectTraits
* Removed unused import
* Integration and Total Daily Energy sensors now inherit icons from their parents during code generation
* Minor comment correction
* Removed redundant icon-handling code from sensor, switch, and text_sensor
* Update esphome/components/tsl2591/tsl2591.h
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Added icon property to binary sensor, climate, cover, and fan component tests
* Added icons for Binary Sensor, Climate, Cover, Fan, and Light to API
* Consolidated EntityBase fields in MQTT components
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-10-10 10:37:05 +02:00
Nate Lust
92b85f98e8
Sgp40 fix ( #2462 )
...
* Sample from SGP40 sensor at the appropriate interval
The spg40 sensor must be sampled at 1Hz for the VOC index algorithm
to work correctly. This commit introduces a on device timer to
sample correctly seperately from updating the public state of the
component.
* Add missing configuration values for SGP40
The SGP40 component was not printing all of it's configuration in
dump_config, add in the missing store_baseline value.
* Address review comments
* Format according to clang-tidy
* Attempt 2 at clang tidy
2021-10-10 10:33:04 +02:00
definitio
c092d92d45
Fix cover state ( #2468 )
2021-10-10 10:31:15 +02:00
Ryan Mounce
e514a1fcd4
Use enum for Tuya fan direction datapoint ( #2471 )
...
Fix regression from PR2059. Tested with Arlec DCF5242HA.
2021-10-10 10:28:37 +02:00
davidmonro
a1b28cb36e
atm90e32: make the total_increasing class sensors actually be increasing totals. ( #2459 )
...
Co-authored-by: David Monro <david.monro@anu.edu.au>
2021-10-09 17:44:16 +02:00
Maurice Makaay
3f2d9abfe6
Correct I2C read() return val check in bh1750 component. ( #2465 )
...
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
2021-10-09 10:30:21 +02:00
Otto Winter
95d7ad543f
API encryption switch to libsodium backend ( #2456 )
2021-10-07 22:05:26 +02:00
Jesse Hills
d9b2903d78
Add log line to show if API encryption is being used ( #2450 )
2021-10-07 22:04:55 +02:00
Otto Winter
9bf72ff05f
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-10-07 22:03:05 +02:00
Martin
5461f87ff0
I2c fix ( #2460 )
2021-10-07 21:18:00 +02:00
Otto Winter
1c58b17235
API encryption switch to libsodium backend ( #2456 )
2021-10-06 22:36:12 +02:00
Jesse Hills
22e3bc7cfe
Add id() for restoring global ( #2454 )
2021-10-06 22:35:11 +13:00
Paul Monigatti
955c96731e
Add Safe Mode Restart Switch ( #2437 )
2021-10-06 20:44:48 +13:00
Otto Winter
54a173dbf1
I2C re-introduce very verbose logging ( #2446 )
2021-10-06 11:57:23 +13:00
Jesse Hills
e083d7f4d0
Add log line to show if API encryption is being used ( #2450 )
2021-10-06 11:26:18 +13:00
Martin
a57580b5ab
Fix compilation error ( #2447 )
2021-10-05 17:56:32 +02:00
Paul Monigatti
6ec546a6a4
Improved validation for Addressable Light Partition Segments ( #2439 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-10-05 12:00:23 +13:00
NMC
877367677b
Add support for Airthing Wave Mini ( #2440 )
2021-10-05 11:56:34 +13:00
Otto Winter
87358e8843
Fix esp32 no longer has Hash internal lib ( #2441 )
2021-10-04 16:14:51 +02:00
Maurice Makaay
5c06cd8eb3
Fix I2C recovery ESP32 esp-idf ( #2438 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-04 12:33:25 +02:00
Stefan Agner
46b4c970d1
Fix socket abstraction for ESP-IDF v4 ( #2434 )
2021-10-03 22:21:45 +02:00
Stefan Agner
49f46a7cdd
Use size_t to fix comparision using RISC-V toolchain ( #2436 )
2021-10-03 21:55:19 +02:00
Stefan Agner
1627dff166
Disable dependency finder on ESP32 ( #2435 )
2021-10-03 21:53:40 +02:00
Maurice Makaay
cee08debff
Hotfix for ESP8266 OTA issue: ERROR Error binary size ( #2432 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-03 16:15:01 +02:00
Otto Winter
912793eddf
Convert time to use tzdata ( #2425 )
2021-10-03 14:10:53 +02:00
Keith Burzinski
eaa5200a35
Thermostat publish state fix ( #2427 )
2021-10-03 14:10:43 +02:00
cvwillegen
a7687c3e17
Add local MAC address to WiFi info ( #2428 )
2021-10-03 13:27:59 +02:00
Maurice Makaay
932e0469f7
Fix ESP32 esp-idf OTA updates ( #2424 )
...
* WIP on separating out the OTA backends.
* Split off the individual OTA backends.
* Cleanup the three backends, split into .h and .cpp.
* After successfull flashing, activate the new boot partition.
* Fix linting issues.
* Minor cleanup
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-10-02 16:02:01 +02:00
Maurice Makaay
d0dfc94a61
Fix I2C recovery on Arduino ( #2412 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 12:53:37 +02:00
Maurice Makaay
5a2984d03a
Fix attach_interrupt(...) for esp-idf framework ( #2416 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-10-01 10:11:07 +02:00
Maurice Makaay
c89018a431
Option to ignore CRC for EFuse MAC address ( #2399 )
...
* Accept changes as proposed by black.
* Added test and implemented optional correctly.
* Disable PHY RF full calibration (because it calls the breaking MAC retrieval function).
* Disable CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE instead of enable, dummy!
* Rename CONF_IGNORE_EFUSE_MAC_CRC to CONF_ESP32_IGNORE_EFUSE_MAC_CRC.
* Removed unused import.
* Fix ordering of constants.
* Moved all MAC address logic to core helpers.
* Use pretty MAC address for the log.
* Use standard MAC formatter function for debug component.
* Fix clang-formatting.
* Fix clang-formatting.
* Brought wording of comments in line with other function-describing comments.
* Processed code review by @OttoWinter
* Add USE_ESP32_IGNORE_EFUSE_MAC_CRC to defines.h
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-30 18:08:15 +02:00
Oxan van Leeuwen
1031ea4313
Fix line endings normalization ( #2407 )
...
* Strip CRLF line endings from modbus controller files
* Normalize all line endings to LF
2021-09-30 18:07:28 +02:00
Oxan van Leeuwen
5b0fbbaada
Replace std::move() with const references where possible ( #2421 )
...
* Replace std::move() with const references where possible
* Fix formatting
2021-09-30 16:25:08 +02:00
Andy Allsopp
946db3fd50
Add viewport meta tag to web server layout ( #2419 )
...
* Update web_server.cpp
Added viewport meta tag to web_server.cpp in order to better control layout on mobile browsers. Adds 70 characters. Vastly improves accessibility on mobile devices.
* Update web_server.cpp
split line to meet clang format requirement.
* Update web_server.cpp
Reworked line break for clangtidy
2021-09-30 13:03:30 +02:00
WeekendWarrior1
3dfc8d4291
String manipulation filters for text sensors ( #2393 )
...
* initial text sensor filter POC
* fixed verbose logging
* add append, prepend, substitute filters
* add to lower, get to upper working without dummy
* clang lint
* more linting...
* std::move append and prepend filters
* fix verbose filter::input logging
* value.c_str() in input print
* lambda filter verbose log fix
* correct log tag, neaten to upper and to lower
* add on_raw_value automation/trigger
2021-09-29 23:25:06 +02:00
Oxan van Leeuwen
4f5e4f3b86
Move #ifdef to after header include ( #2417 )
...
defines.h needs to be included first.
Fixes esphome/issues#2490 .
2021-09-29 23:21:52 +02:00
Jesse Hills
505d1d78fb
Remove default initializations from tuya cover ( #2415 )
2021-09-29 12:19:19 +13:00
Otto Winter
855c98d815
Fix tuya cover lint checks ( #2414 )
2021-09-28 23:15:52 +02:00
Marek Marczykowski-Górecki
c26ea7e4e0
Tuya: add cover component ( #2279 )
2021-09-29 10:02:13 +13:00
irtimaled
c39ac9edfe
Support HSV-based color support on tuya light ( #2400 )
...
* fix: stop tuya light state getting reset
* fix typo
* Support for HSV color in Tuya
* Clamp formatting
2021-09-28 22:19:17 +02:00
Stephen Tierney
af04f565cf
Add support for SCD4X ( #2217 )
...
* Initial commit
* clang-format fixes
* Update CODEOWNERS
* clang-format fixes
* Fix merge error
* Fix missing return
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-28 22:10:25 +02:00
Jesse Hills
8ef2ad17b5
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:41:51 +13:00
Otto Winter
4579f78bf9
Merge pull request from GHSA-48mj-p7x2-5jfm
2021-09-28 15:39:41 +13:00
Sergey V. DUDANOV
1853407645
Midea fix ( #2395 )
2021-09-28 15:36:23 +13:00
Jesse Hills
2234f6aacf
Fix lint issues in web_server_base ( #2409 )
2021-09-28 15:33:30 +13:00
Otto Winter
be965a60eb
Merge pull request from GHSA-48mj-p7x2-5jfm
...
* Move web_server auth to web_server_base
* Fix
* Fix
* Add middleware system
2021-09-28 13:53:38 +13:00
0hax
5624fafb3a
Fix handling of timestamps in Teleinfo component. ( #2392 )
...
* teleinfo: avoid a buffer overflow.
When reading tag or values, data is written to the buffer even if the
size if bigger than the buffer. Add a new 'max_len' argument to
get_field() to avoid this error.
Signed-off-by: 0hax <0hax@protonmail.com>
* teleinfo: read extra timestamp field for some tags.
Some tags has an extra timestamp field that need to be read before the
actual data.
The code is inspired by Jpsy work:
29339c14f9
2021-09-27 22:32:08 +02:00
Daniel Müller
2eb5f89d82
Add cover toggle support ( #1809 )
...
* Add cover toggle support
Step through open/stop/close/stop sequence with every toggle
* Move the cover toggle logic to perform()
* Add clang-tidy CI suggestion
* Implement cover toggle action as cover trait
* Handle toggle correctly if cover fully closed on POR
* Fix CI finding
* Add deprecated warning
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Don't add already deprecated interface
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Mueller, Daniel <daniel.mueller@karlstorz.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:31:15 +02:00
Marcos Pérez Ferro
e30f17f64f
Add Current based cover ( #1439 )
...
* Adding first version of current_base cover. No Interlock yet.
* simplifying code
* Implementing malfunction protection
* Adding test
* Fixing too long lines
* Fixing test sensor names
* Adding missing id's in ade7953 tests
* Adding code owners as requested
* Fixing issue setting position when stop reached
* Fixing issue setting position when stop reached
* Black formatting
* Fixing format issues
* Fix for concurrent changes
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 22:22:45 +02:00
irtimaled
1ba560dc9e
fix: stop tuya light state getting reset ( #2401 )
...
* fix: stop tuya light state getting reset
* fix typo
2021-09-27 21:54:51 +02:00
Maurice Makaay
8c86a18dc6
Add missing include for defines.h. ( #2403 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-27 21:53:47 +02:00
Christian Taedcke
b2d516c70a
ccs811: Skip reading data if it is not available ( #2404 )
...
On bootup the ccs811 reports that no data is available. No error flag
is set in that case. The current implementation ignores this, reads
and publishes the invalid data, which is 0xFDFD for both tvoc and co2
in my case.
This commit fixes this and does not read and publish invalid data.
2021-09-27 21:53:05 +02:00
Otto Winter
45940b0514
Dashboard node import and render in browser ( #2374 )
2021-09-27 10:10:53 -07:00
Otto Winter
97e76d64d6
Re-enable TCP nodelay for ESP32 ( #2390 )
2021-09-27 11:40:28 +02:00
Jesse Hills
756c6721e9
Fix NDEF URI casing ( #2397 )
2021-09-27 11:11:27 +13:00
JonasEr
4c390d9f9f
Extend nfc ndef records with Text ( #2191 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-27 09:38:08 +13:00
Sergey V. DUDANOV
0d0954d74b
Midea fix ( #2395 )
2021-09-27 09:32:33 +13:00
Martin
7672ba2c8d
Modbus controller ( #1779 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-27 09:27:24 +13:00
WeekendWarrior1
4d28afc153
add fan.cycle_speed action ( #2329 )
2021-09-27 08:32:46 +13:00
irtimaled
7246f42a8e
Tuya rgb support ( #2278 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-26 21:34:06 +13:00
irtimaled
bdcffc7ba9
fix: Setting Tuya string DP value ( #2394 )
2021-09-26 21:27:43 +13:00
rbaron
95a6715b2b
Adds light sensor support for b-parasites ( #2391 )
2021-09-25 13:16:27 +02:00
Otto Winter
5342edf04a
Misc fixes for esp-idf ( #2386 )
2021-09-25 10:05:32 +02:00
Otto Winter
d344b1ca0e
Fix arduino esp32 wifi v2 ( #2389 )
2021-09-25 10:04:57 +02:00
Otto Winter
278863d027
Fix some issues with wifi driver after IDF refactor ( #2387 )
2021-09-25 09:16:32 +02:00
Otto Winter
8503e08ee6
Fix InterruptLock on ESP-IDF ( #2388 )
2021-09-25 09:14:07 +02:00
Otto Winter
aec02afcdc
Fix clang-tidy header filter ( #2385 )
...
* Fix clang-tidy header filter
* Allow private members
* Fix clang-tidy detections
* Run clang-format
* Fix remaining detections
* Fix graph
* Run clang-format
2021-09-24 18:02:28 +02:00
Maurice Makaay
52dd79691b
Read unencrypted DSMR telegrams in chunks ( #2382 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-24 14:15:22 +02:00
Christian Taedcke
963b28181f
Always execute i2c bus recovery on setup ( #2379 )
2021-09-23 20:11:40 +02:00
Christian Taedcke
210a9a4162
Fix esp-idf pinmask bit-shift overflow ( #2380 )
2021-09-23 18:24:29 +02:00
Paul Monigatti
ea6a7a22ff
Fix ESP8266 ADC ( #2376 )
2021-09-23 10:45:41 +02:00
Stijn Tintel
5ddba719c5
Fix ir_climate on ESP32-C3 ( #2314 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 20:13:24 +02:00
Otto Winter
b398d826c1
Fix two i2c error code return errors ( #2375 )
2021-09-22 20:07:43 +02:00
Philipp Riederer
edb557f79e
ledc: do not try to write_state to an uninitialized output ( #1732 )
...
Co-authored-by: Philipp Tölke <ptoelke@tecracer.de>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 19:50:19 +02:00
Martin
262d69308d
fix i2c scanning eror for Arduino ( #2364 )
2021-09-22 19:08:42 +02:00
Oxan van Leeuwen
ed3ad615d8
Fix compilation due to incompatibility between #1237 and IDF changes ( #2372 )
2021-09-22 14:07:39 +02:00
ZJY
66761ff340
Add SSD1305 support to SSD1306 integration along with few new options ( #1902 )
...
* Add serveral options for SSD1306 integration
* Add SSD1305 support
(SSD1305 is similar to SSD1306, it seems SSD1305 has
brightness and color register but does not have charge pump)
* Add some description when manipulating registers
* Add flip, offset and invert option to get more compatibility
with various display modules
* Fix typo `setup_ssd1036' -> `setup_ssd1306'
* Add SSD1306 brightness validation tip
* Add more description, limit offset range
* Changes according to linter
* Fix test
* Raise error instead of using warning
* Fix wrong logic
* Remove logger
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Remove logging import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-22 13:47:41 +02:00
Gustavo Ambrozio
8bebf138ee
Wifi scan results ( #1605 )
...
* adding a scan results wifi text sensor
* Code comment
* Adding scan results to test
* Removing redundant call
* linting
* Better method to update wifi info
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Getting loop back
At least for now.
* Trying out suggestion again
* Applying cr suggestions
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-09-22 13:44:09 +02:00
wifwucite
fd836e982e
Mqtt topics to support numeric fan speed ( #1859 )
...
* numeric speed added
* when dumping config for MQTT components log a note when skipped due to is_internal
* added new topics to paython code validation/generation
* reformatted with black
* formatting corrected
* use dump_config_ mechanism to skip internal components
* use dump_config_ mechanism to skip internal components
* style issues resolved
* do_dump_config removed
* formatting fixed
* formatting fixed
* Drop parent dump_config() calls
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 13:42:58 +02:00
Trevor North
e32722db70
Allow sloppy datapoint message length ( #1982 )
...
This allows datapoint update messages to be handled even if the overall
message is longer than required (likely that it contains trailing empty
bytes).
The specific type handling will read only the expected data lengths so
we only need to hard bail if we have too little data not too much.
2021-09-22 13:29:05 +02:00
Stephen Tierney
b20760c93c
Add support for LTR390 ( #1505 )
...
* Add support for ltr390
* Fix linting errors
* Fix more linting errors
* Linting fixes continued
* Linting forever
* Another one
* Fix regression and linting
* Fix narrowing conversion
* Add test and bugfix
* Add codeowners
* Update CODEOWNERS
* Update sensor defs
* Reformatted with black
* Fixed device class import
* Update CODEOWNERS
* Update CODEOWNERS
* Adding all config options
As requested https://github.com/esphome/esphome/pull/1505#discussion_r597326897
* Moving test to different config file
test1.yml runs out of memory
* Update according to comments
* Add safety clause to reading modes
* Fix clang-tidy complaint
* Revert change to i2c component
* Fix for changes in dev
* Revert "Revert change to i2c component"
This reverts commit 2810df59e9
2021-09-22 13:24:19 +02:00
Jesse Hills
654e31124e
Correctly invert the float output state ( #2368 )
2021-09-22 22:59:03 +12:00
Stanislav Meduna
8e36e1b92e
ili9341: use larger SPI transfers ( #1628 )
...
The original version uses write_byte to tranfer every byte of
the display buffer which is quite extensive as every byte needs
to be waited for in the SPI driver.
This patch prepares transfers in 64-byte chunks. The result is
a visible faster redraw of the display.
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-22 12:43:17 +02:00
Tommy van der Vorst
9fe7b08874
Add support for Waveshare 7.5 inch (C) bichromatic display (black-and-white only for now) ( #1844 )
...
* Add support for Waveshare 7.5 inch (B) bichromatic display (black-and-white only for now)
* Use drawing commands specific to bichromatic displays
* Fix inaccurate comment
* Fix merge error
* Formatting
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:39:41 +02:00
Robert Resch
f1364d4af4
Combine code of xiaomi_miscale and xiaomi_miscale2 ( #2266 )
...
* Combine xiaomi_miscale and xiaomi_miscale2
* check if message contains impedance
* auto detect scale version
* remove xiaomi_miscale2
* fix lint errors
* Apply suggestions from code review
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Apply suggestions from code review on old code
* Fix clang-tidy warnings
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-22 12:12:55 +02:00
Silvio
ed593544d8
Add support for Daly Smart BMS ( #2156 )
...
* Add support for Daly Smart BMS
* Fix clang-format and python lint
* Fix const declaration
* Add code owner
* Fix malloc with std::vector
* Fix with suggestions
* Revert "Fix with suggestions"
This reverts commit bc618f20cf
2021-09-22 12:03:42 +02:00
Niccolò Maggioni
0929a0f8aa
Discard senseair commands echoes & fix calibration result check ( #2358 )
2021-09-22 11:15:51 +02:00
Paul Monigatti
13b3412b45
Fix Dallas parent not being set ( #2369 )
2021-09-22 11:12:42 +02:00
Maurice Makaay
888e315553
Fix OTA crash during reading of new bin file. ( #2366 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-22 10:37:46 +02:00
WeekendWarrior1
40e0100c1e
add = to default font glpyh list ( #2361 )
2021-09-22 16:57:16 +12:00
Paul Monigatti
c51352d04d
Allow non-addressable lights in light partitions ( #2256 )
2021-09-22 13:59:21 +12:00
Paul Monigatti
c8a8acd46e
Fix ESP8266 preference loading ( #2367 )
2021-09-22 13:55:49 +12:00
Otto Winter
bbac1534a3
Fix ESP8266 preferences not set up ( #2362 )
2021-09-21 21:59:11 +02:00
Maurice Makaay
92a24d52be
Fix OTA password mismatch error. ( #2363 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-09-21 17:11:58 +02:00
Alex
491f8cc611
Configurable Flash Write Interval ( #2119 )
...
Co-authored-by: Alex <33379584+alexyao2015@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-21 13:47:51 +02:00
Otto Winter
7c884329eb
Fix MDNS not registered ( #2359 )
2021-09-21 16:34:56 +12:00
Martin
bac58bba4d
fixes compilation error in rtttl ( #2357 )
...
Compilation error for millis() and delay() after #2303
2021-09-20 22:13:46 +02:00
Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
1e8e471dec
Introduce call_dump_config() indirection ( #2325 )
2021-09-20 11:16:31 +02:00
Christian Taedcke
9ebe075f9b
Add deep sleep wakeup from touch ( #1238 ) ( #2281 )
2021-09-20 20:12:32 +12:00
Aljaž Srebrnič
3052c64dd7
Add invert_colors option for st7735 ( #2327 )
2021-09-20 20:08:08 +12:00
poptix
81685573e1
Properly calculate negative temperatures in sm300d2 ( #2335 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-20 19:44:18 +12:00
synco
945ed5d3bd
Added graphing component ( #2109 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-20 19:29:47 +12:00
besteru
82eca13d7b
Fix error reporting for DHT bit read loop ( #2344 )
2021-09-20 09:14:44 +02:00
synco
5f21b925da
Calculating the AC only component of the samples ( #1906 )
...
Co-authored-by: Synco Reynders <synco@deviceware.co.nz>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:12:50 +02:00
Oxan van Leeuwen
8bda8e5393
Clean-up sensor integration ( #2275 )
2021-09-20 14:34:59 +12:00
Otto Winter
7c17e72db4
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
d180aee57f
Apply color brightness to addressable light effects ( #2321 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
e3ffecefc0
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-20 14:16:56 +12:00
Oxan van Leeuwen
4c61cf153c
Light transition fixes ( #2320 )
2021-09-20 14:16:56 +12:00
Paul Monigatti
c78fb90e2f
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-20 14:16:39 +12:00
Otto Winter
a990898256
Add readv and writev for more efficient API packets ( #2342 )
2021-09-20 10:33:10 +12:00
Luca Gugelmann
c60c618204
Fix SPIDevice::write_byte16 to actually take a 16 bit argument ( #2345 )
2021-09-20 09:19:20 +12:00
Stefan Rado
53bd197c44
Add eco mode to tuya climate component ( #1860 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 09:17:43 +12:00
dependabot[bot]
dbb195691b
Bump pylint from 2.10.2 to 2.11.1 ( #2334 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-19 19:22:28 +02:00
Oxan van Leeuwen
50da630811
Apply color brightness to addressable light effects ( #2321 )
2021-09-19 18:46:26 +02:00
Kamil Trzciński
30eca885c9
Add esp8266_disable_ssl_support: config option ( #2236 )
2021-09-19 18:46:17 +02:00
Oxan van Leeuwen
f76685fccf
Cease using deprecated Cover methods in automations ( #2326 )
2021-09-19 18:31:31 +02:00
Oxan van Leeuwen
68d547595e
Light transition fixes ( #2320 )
2021-09-19 18:31:20 +02:00
Paul Monigatti
64341d1d18
Fix MQTT discovery for sensor state_class ( #2331 )
2021-09-19 18:30:41 +02:00
Matthew Mazzanti
8f3a739da7
Allow transforms and flashes to not update remote_values ( #2313 )
2021-09-16 05:59:58 +12:00
Oxan van Leeuwen
c6dc8a11e2
Add namespace to all PlatformIO library references ( #2296 )
...
* Remove unnecessary duplication in platformio.ini
* Add namespace to all platformio library references
* Add cmake-build-* to gitignore
They're generated by the CLion add-on for each PlatformIO environment.
Listing them all separately seems nonsensical.
2021-09-15 19:01:31 +02:00
Guillermo Ruffino
d281e59f3a
ac_dimmer increase gate time for robotdyn ( #1708 )
...
* ac_dimmer increate gate time for robotdyn
* add explanation on longer gate enable time
2021-09-15 08:40:52 -03:00
Stefan Rado
2db8c42e1d
Support direct relay state feedback for tuya climate component ( #1668 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-15 20:23:35 +12:00
Jesse Hills
ad5f2cd748
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:01:54 +12:00
Maurice Makaay
efae363739
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 19:01:54 +12:00
jsuanet
3b9d126322
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 19:01:54 +12:00
Jesse Hills
0ea77de98c
Start a wifi scan after saving station details ( #2315 )
2021-09-15 19:00:51 +12:00
Maurice Makaay
19014331d8
Fix aioesphomeapi API logger with explicit api.port in the YAML. ( #2310 )
2021-09-15 08:48:27 +02:00
Guillermo Ruffino
de33cbd7e7
Dsmr updates ( #2157 )
...
* add option to use check_crc
* ignore newline before ( in parsing
* add gas delivered text for raw sensor
* fix compile issue when not listing any sensor
* make gas_mbus_id configurable
* update dsmr lib for clang
2021-09-14 22:14:49 -03:00
JonasEr
103ba4c696
Bug fix of NFC message & records becoming inaccessible in on_tag lambdas ( #2309 )
2021-09-15 10:06:43 +12:00
jsuanet
5a90b83f63
Fix unit of measurement fields for DSMR power consumed/delivered fields ( #2304 )
...
Co-authored-by: Jos Suanet <jos@suanet.net>
2021-09-15 09:22:45 +12:00
Oxan van Leeuwen
716039e452
Use standard version of make_unique when available ( #2292 )
2021-09-14 14:27:35 +02:00
Jesse Hills
89f2ea5725
Fix binary strobe ( #2301 )
2021-09-14 23:07:07 +12:00
Jesse Hills
a32ad33b4e
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 23:07:07 +12:00
Otto Winter
a328fff5a7
Fix api noise explicit reject ( #2297 )
2021-09-14 23:07:07 +12:00
Otto Winter
233783c76c
API Noise logging ( #2298 )
2021-09-14 23:07:07 +12:00
Jas Strong
460a144ca8
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-14 23:06:13 +12:00
Oxan van Leeuwen
23ead416d5
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-14 23:06:13 +12:00
Jesse Hills
4cc2817fcd
Fix binary strobe ( #2301 )
2021-09-14 22:59:15 +12:00
Jesse Hills
d437cc915c
Allow simple hostname for sntp servers ( #2300 )
2021-09-14 22:40:45 +12:00
Otto Winter
dd3f2f6c7e
Fix api noise explicit reject ( #2297 )
2021-09-14 11:53:49 +02:00
Otto Winter
855112dfc3
API Noise logging ( #2298 )
2021-09-14 09:53:37 +02:00
Otto Winter
e92a9d1d9e
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-14 07:13:00 +12:00
Oxan van Leeuwen
4eb51ab4d6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-14 07:12:59 +12:00
Oxan van Leeuwen
e6b0a0ca2b
Clean-up sensor integration ( #2275 )
2021-09-13 18:58:49 +02:00
Oxan van Leeuwen
924df1e7de
Run clang-tidy against Arduino 3 ( #2146 )
...
* Add macros header with more usable Arduino version defines
* Change Arduino version checking to use our version defines
* Add missing ESP8266 check
* Rename Arduino version macro to ARDUINO_VERSION_CODE
* Upgrade clang-tidy to use Arduino 3
* Fix clang-tidy warnings
* Upgrade NeoPixelBus to upstream 2.6.7
* Use Arduino-version-appropriate API to set redirect flags
* Remove now unnecessary CLANG_TIDY ifdefs
* Add preprocessor hackery to avoid including pgmspace.h
* Bump base image to 4.1.1 and update lint
* Fix nfctag
* Fix make_unique ambiguous
* Fix ignore name
* Fix ambiguous v2
* Remove unused begin
* Cast time_t to prevent issues on platforms where time_t is 32bit
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:55:04 +02:00
Otto Winter
ed7983af41
Fix API socket issues ( #2288 )
...
* Fix API socket issues
* Fix compile error against beta
* Format
2021-09-13 18:52:53 +02:00
Oxan van Leeuwen
40c474cd83
Run clang-tidy against ESP32 ( #2147 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 18:11:27 +02:00
Oxan van Leeuwen
133a17d6eb
Add esphal.h include to inkplate6 component ( #2286 )
2021-09-13 16:55:01 +02:00
Oxan van Leeuwen
fe47ddc27a
Convert st7735.h to use LF line endings ( #2287 )
2021-09-13 16:39:35 +02:00
Tercio Filho
aad03f1bf5
Fix issue #2054 . PZEM004T Component doesn't set the module address. ( #1784 )
2021-09-13 15:36:01 +02:00
Otto Winter
a4867a00ea
Activate owning-memory clang-tidy check ( #1891 )
...
* Activate owning-memory clang-tidy check
* Lint
* Lint
* Fix issue with new NfcTag constructor
* Update pointers for number and select
* Add back the NOLINT to display buffer
* Fix merge
* DSMR fixes
* Nextion fixes
* Fix pipsolar
* Fix lwip socket
* Format
* Change socket fix
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-13 11:31:02 +02:00
James Braid
c6109024aa
Fix SM300D2 sensor component routines so they correctly read the sensor output ( #2159 )
2021-09-13 11:23:59 +02:00
Kamil Trzciński
8a2b1d9359
Expose select on Frontend web_server: ( #2245 )
2021-09-13 10:06:28 +02:00
Jas Strong
63a186bdf9
t6615: tolerate sensor dropping commands ( #2255 )
...
The Amphenol T6615 has a built-in calibration system which means that
the sensor could go away for a couple of seconds to figure itself out.
While this is happening, commands are silently dropped.
This caused the previous version of this code to lock up completely,
since there was no way for the command_ state machine to tick back to
the NONE state.
Instead of just breaking the state machine, which might be harmful on
a multi-core or multi-threaded device, add a timestamp and only break
the lock if it's been more than a second since the command was issued.
The command usually doesn't take more than a few milliseconds to
complete, so this should not affect things unduly.
While we're at it, rewrite the rx side to be more robust against
bytes going missing.
Instead of reading in the data essentially inline, read into a buffer
and process it when enough has been read to make progress.
If data stops coming when we expect it to, or the data is malformed,
have a timeout that sends a new command.
Co-authored-by: jas <jas@asspa.in>
2021-09-13 09:54:48 +02:00
Oxan van Leeuwen
d594a6fcbc
Store strings only used for logging in flash ( #2274 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-09-13 09:48:52 +02:00
Oxan van Leeuwen
e18dfdd656
Suppress excessive warnings about deprecated Fan interfaces ( #2270 )
2021-09-13 09:39:18 +02:00
Oxan van Leeuwen
0cd24c629a
Compatibility with clang-tidy v14 ( #2272 )
2021-09-13 09:35:55 +02:00
Oxan van Leeuwen
f31e0532c4
Untangle core headers (part 1) ( #2276 )
2021-09-13 09:33:29 +02:00
irtimaled
f0b6aabc96
Support inverting color temperature on tuya lights ( #2277 )
2021-09-13 09:33:20 +02:00
Oxan van Leeuwen
97a18717e6
Disable automatic usage of SNTP servers from DHCP ( #2273 )
2021-09-13 12:44:39 +12:00
poptix
87842e097b
sm300d2: Accept (undocumented) 0x80 checksum offset. ( #2263 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-10 21:34:38 +12:00
Jesse Hills
7dd40e2014
Fix a few ESP32-C3 compiler issues ( #2265 )
...
* Fix using Serial when using ESP32-C3 standard pins
* Force type for std::min in pn532
* Fix variable size where size_t is different on exp32-c3
2021-09-10 21:34:38 +12:00
poptix
3d71e2e189
sm300d2: Accept (undocumented) 0x80 checksum offset. ( #2263 )
...
Co-authored-by: Matt Hallacy <github@poptix.net>
2021-09-10 21:05:25 +12:00
Jesse Hills
affaaf7d2c
Fix a few ESP32-C3 compiler issues ( #2265 )
...
* Fix using Serial when using ESP32-C3 standard pins
* Force type for std::min in pn532
* Fix variable size where size_t is different on exp32-c3
2021-09-10 12:10:28 +12:00
Stephen Tierney
d2616cbdfc
PMSA003i Update state_class and async ( #2216 )
...
* Update component (state_class and async)
* No need to specify empty device class
* Remove unused import
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-09 10:14:08 +12:00
Keith Burzinski
faf1c8bee8
SGP40 sensor start-up fix ( #2178 )
2021-09-09 09:42:35 +12:00
Peter van Dijk
f09aca4865
pm1006: add support for sending a measurement request ( #2214 )
2021-09-09 09:35:00 +12:00
Jesse Hills
cc52f37933
Revert "Dont dump legacy fields ( #2241 )" ( #2259 )
...
This reverts commit 97eba1eecc
2021-09-09 09:29:08 +12:00
Otto Winter
e5051eefbc
API encryption ( #2254 )
2021-09-09 09:22:47 +12:00
Peter van Dijk
9e5cd0da51
ccs811: publish firmware version; log bootloader and HW version; fix a bug ( #2006 )
2021-09-09 09:19:43 +12:00
Sergey V. DUDANOV
4e120a291e
Midea support v2 ( #2188 )
2021-09-09 09:10:02 +12:00
Otto Winter
2790d72bff
Convert API to use sockets ( #2253 )
...
* Socket component
* Lint
* Lint
* Fix esp8266 missing INADDR_ANY
* API convert to sockets and frame helper
* Fix compile error
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-08 12:52:57 +02:00
Otto Winter
e44f447d85
Fix socket not setting callbacks early enough ( #2260 )
2021-09-08 12:02:32 +02:00
Otto Winter
f924e80f43
Socket component ( #2250 )
2021-09-08 15:41:42 +12:00
Chris Nussbaum
6180ee8065
Template sensors always publish on update interval ( #2224 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-08 15:36:49 +12:00
wifwucite
1be106c0b5
Fix fan speed restore issue on boot ( #1867 )
2021-09-08 15:30:17 +12:00
dgtal1
b0533db2eb
Add new trigger to fan component on_speed_set ( #2246 )
2021-09-08 15:15:57 +12:00
Otto Winter
dba502c756
Logger prevent recursive logging ( #2251 )
2021-09-08 08:57:20 +12:00
Oxan van Leeuwen
d9cb64b893
Add device classes new in HA 2021.9 ( #2248 )
2021-09-07 10:12:26 +12:00
Kamil Trzciński
2d91e6b977
template: select: fix initial_value cannot be used with lambda ( #2244 )
2021-09-07 08:00:08 +12:00
Jesse Hills
e2d97b6f36
Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2204 )
2021-09-06 08:57:58 +12:00
Jesse Hills
97eba1eecc
Dont dump legacy fields ( #2241 )
2021-09-06 08:36:55 +12:00
Jesse Hills
ff6bed54c6
Remove last_reset_type and convert all those sensors to TOTAL_INCREASING ( #2233 )
2021-09-06 08:30:47 +12:00
Jesse Hills
f9b0666adf
Allow using a git source for a package ( #2193 )
2021-09-06 08:23:06 +12:00
Christian Ferbar
77508f7e44
Fix UARTComponent hardware vs software UART0 conflict ( #2229 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-09-04 14:49:34 +12:00
Oxan van Leeuwen
54de0ca0da
Reject template select/number/switches that don't handle user input ( #2230 )
2021-09-04 14:46:53 +12:00
Oxan van Leeuwen
f364788c03
Expose WHITE/CWWW/RGBCT color modes over MQTT ( #2231 )
2021-09-04 14:32:33 +12:00
DAVe3283
00aaf84c37
Fix uptime's state_class (esphome/issues#2337) ( #2205 )
2021-09-03 16:58:30 +12:00
Kamil Trzciński
b01bc76dc5
mqtt_sensor: properly send state_class via MQTT ( #2228 )
2021-09-03 16:37:18 +12:00
Chris Nussbaum
a4d024f43d
Add is_on and is_off conditions for the fan component ( #2225 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-02 12:16:11 +12:00
Alex
9937ad7fa0
Cleanup flash transitions ( #2227 )
2021-09-02 11:56:40 +12:00
Petko Bordjukov
edcd88123d
iBeacon support for ble_presence ( #1627 )
2021-09-02 11:46:15 +12:00
Alex
ea1b5e19f0
Add transitions to light flash ( #2201 )
2021-08-31 14:18:16 +12:00
Jesse Hills
54337befc2
Fix some lint errors in pylint 2.10.2 ( #2226 )
2021-08-31 14:00:58 +12:00
Jérôme Laban
140ef791aa
Support for the AirThings Wave Plus ( #1656 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 14:00:30 +12:00
WeekendWarrior1
03190611bb
Add H-Bridge fan component ( #2212 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 10:10:22 +12:00
Marcio Granzotto Rodrigues
9218e85bd6
Remove footer validation for fujitsu_general ( #2196 )
2021-08-31 06:03:30 +12:00
Alessandro Campolo
b5de43b225
cs_pin made optional for ili9341 ( #2219 )
2021-08-30 09:07:06 +12:00
Jesse Hills
b955527f6c
Fix css/js file loading for webserver when esphome not executed form config directory ( #2207 )
2021-08-26 15:34:39 +12:00
marsjan155
94b28102f5
Add st7920 display, ( #1440 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 14:33:03 +12:00
WeekendWarrior1
de871862a8
Optionally set direction on fan.turn_on action ( #2171 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 10:25:24 +12:00
Jesse Hills
3be56fd502
Fix SDM energy units to be KILO... ( #2206 )
2021-08-26 09:27:00 +12:00
Jesse Hills
39cd2838df
Revert "Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2186 )" ( #2202 )
...
This reverts commit b0fa317302
2021-08-25 19:38:51 +12:00
Stephan Peijnik-Steinwender
565473c90c
ST7789V: Make backlight_pin optional ( #2180 )
2021-08-24 22:57:53 +12:00
mtl010957
ed68a0e773
Internally all temperature units are Celsius so just send it directly ( #1840 )
2021-08-24 13:38:59 +12:00
Samuel Sieb
e2640c8368
Fix template select lambda ( #2198 )
2021-08-24 13:26:59 +12:00
Chris Nussbaum
eff626248f
Tuya fan component uses enum datapoint type for speed instead of integer ( #2182 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-08-24 13:20:39 +12:00
puuu
ce29a3b07a
mqtt_light: remove legacy API config that is not compatible with HA 2021.8 ( #2183 )
2021-08-24 13:18:40 +12:00
Oxan van Leeuwen
1c1ad32610
Add deprecated attribute to some deprecated types/methods ( #2185 )
2021-08-24 06:48:12 +12:00
Jesse Hills
71237e2f76
Fix template select log message mentioning number ( #2194 )
2021-08-23 21:21:30 +12:00
Oxan van Leeuwen
518c271eba
Fix addressable light control without transitions & effects with transitions ( #2187 )
2021-08-23 20:44:24 +12:00
Oxan van Leeuwen
d71996e58d
Reduce static RAM usage ( #2140 )
2021-08-23 20:43:54 +12:00
Oxan van Leeuwen
2f33cd2db5
Remove double scheduling from addressable lights ( #1963 )
2021-08-23 20:00:38 +12:00
Oxan van Leeuwen
5ec9bb0fb5
Clean-up constant definitions ( #2148 )
2021-08-23 19:21:30 +12:00
Oxan van Leeuwen
8cc3cbb22e
Add macros header with more usable Arduino version defines ( #2145 )
2021-08-23 19:19:21 +12:00
puuu
b0fa317302
Light: include ON_OFF capability to BRIGHTNESS ColorMode ( #2186 )
2021-08-21 22:26:24 +12:00
Jesse Hills
5cb56bc677
Set SDM voltage state class to measurement ( #2181 )
2021-08-19 21:28:58 +12:00
Jesse Hills
29db77c9c9
Merge branch 'release' into dev
2021-08-18 15:17:33 +12:00
Jesse Hills
4e3b95d120
Add new total_increasing state-class for Home Assistant 2021.9+ ( #2166 )
2021-08-18 11:11:39 +12:00
Jesse Hills
61a9c9fa33
Remove specified accuracy_decimals from total_daily_energy ( #2174 )
2021-08-18 11:11:39 +12:00
Jesse Hills
9c605f2d46
Send dirty states when screen wakes up ( #2167 )
2021-08-18 11:11:39 +12:00
Franck Nijhof
44bb5a89c8
Add Gas device class to DSMR component ( #2169 )
2021-08-18 11:11:39 +12:00
Daniel Hyles
cbdb96f105
Add a dummy color temp ( #2161 )
2021-08-18 11:11:39 +12:00
Oxan van Leeuwen
9ee3463d07
Initialize color temperature to value within range if possible ( #2168 )
2021-08-18 11:11:39 +12:00
Jesse Hills
f0b14055b6
Add new total_increasing state-class for Home Assistant 2021.9+ ( #2166 )
2021-08-18 11:04:13 +12:00
Jesse Hills
fbd9e87b51
Remove specified accuracy_decimals from total_daily_energy ( #2174 )
2021-08-18 10:32:19 +12:00
Jesse Hills
edb3b77916
Send dirty states when screen wakes up ( #2167 )
2021-08-18 10:22:00 +12:00
Chris Nussbaum
ebaa84617f
Total daily energy methods ( #2163 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-08-18 07:16:02 +12:00
Franck Nijhof
8eb18995cb
Add device class update to binary sensor ( #2170 )
2021-08-17 21:44:05 +12:00
Franck Nijhof
ebabf0e7d8
Add Gas device class to DSMR component ( #2169 )
2021-08-17 21:43:51 +12:00
Maurice Makaay
607e1f823d
Minor code cleanup in light components ( #2162 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2021-08-17 20:12:29 +12:00
Daniel Hyles
3b52a306cd
Add a dummy color temp ( #2161 )
2021-08-17 20:05:37 +12:00
Oxan van Leeuwen
0c370d5897
Initialize color temperature to value within range if possible ( #2168 )
2021-08-17 14:02:38 +12:00
Otto Winter
1be9bac3a9
Fix native API log level enum values ( #2151 )
2021-08-16 12:32:48 +12:00
Keith Burzinski
02b5a3efb8
Thermostat delayed fan mode fix ( #2158 )
2021-08-16 12:32:48 +12:00
puuu
bd457f64d8
let sensors announce its state_class via mqtt ( #2155 )
2021-08-16 12:32:48 +12:00
Oxan van Leeuwen
9efeea14f2
Always send all light state values in API ( #2150 )
2021-08-16 12:32:48 +12:00
Otto Winter
9b48ff5775
Fix native API log level enum values ( #2151 )
2021-08-16 11:57:50 +12:00
Keith Burzinski
117b58ebe6
Thermostat delayed fan mode fix ( #2158 )
2021-08-16 09:31:48 +12:00
puuu
303b699005
let sensors announce its state_class via mqtt ( #2155 )
2021-08-16 07:59:29 +12:00
Oxan van Leeuwen
9173da0416
Always send all light state values in API ( #2150 )
2021-08-16 07:40:34 +12:00
Jesse Hills
2735f96516
Fix bad merge again
2021-08-11 21:54:24 +12:00
Jesse Hills
6847645782
Fix bad merge conflict
2021-08-11 21:45:04 +12:00
Jesse Hills
c0f6af7213
Merge branch 'dev' into bump-1.21.0b1
2021-08-11 21:26:26 +12:00
Branimir Lambov
8c41fc2b1d
Support for the DKE screen version of LilyGo-TTGO-T5 V2.3 ( #1969 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 17:14:17 +12:00
Oxan van Leeuwen
46f17bea66
Modular light transformers ( #2124 )
2021-08-11 16:51:35 +12:00
Stefan Agner
11477dbc03
Fix format warning in Tuya component ( #1954 )
2021-08-11 16:50:05 +12:00
buxtronix
947c104eff
Support for AM43 BLE blind motors ( #1744 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: René Klomp <rene@klomp.ws>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Geoff Davis <geoff@geoffdavis.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: dentra <dentra@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Barry Loong <loongyh@users.noreply.github.com>
Co-authored-by: Sergey V. DUDANOV <sergey.dudanov@gmail.com>
Co-authored-by: Balazs Scheidler <bazsi77@gmail.com>
2021-08-11 16:07:10 +12:00
Stefan Agner
e5366dbbe7
Add deassert_rts_dtr option to force RTS/DTR low when using miniterm ( #2089 )
2021-08-11 07:55:36 +12:00
Andreas Hergert
d3375193a9
Feature pipsolar anh ( #1664 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 07:48:32 +12:00
Chris Nussbaum
6144ce1fe0
Break the Tuya set_datapoint_value method into separate methods per datapoint type ( #2059 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
Co-authored-by: Trevor North <trevor@freedisc.co.uk>
2021-08-11 07:44:31 +12:00
Jesse Hills
d258e06fd7
Add rgbct and color_temperature light platforms ( #2138 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-08-10 21:28:56 +12:00
Stephen Tierney
6a2f0f5143
Add support for PMSA003i ( #1501 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: steve <steve@Hackintosh.local>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 11:00:16 +02:00
WJCarpenter
183e2a8471
Support component tsl2591 ( #2131 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: WJCarpenter <bill@carpenter.org>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:48:06 +02:00
Oxan van Leeuwen
c6c2842bdb
Always abort on allocation when out-of-memory ( #2129 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:46:46 +02:00
Guillermo Ruffino
f26767b65e
Dsmr component ( #1881 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:32:16 +02:00
Keith Burzinski
98d32876b5
Thermostat enhancements 2 ( #2114 )
2021-08-10 10:16:44 +02:00
Trammell Hudson
e5d0f3c036
waveshare_epaper: add support for ttgo t5 b74 variant display ( #1869 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:09:46 +02:00
Adrián Panella
cc15aaacbb
RFC: status_led: allow to share single light ( #1974 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 09:55:34 +02:00
Tom Matheussen
b92311402a
Adds CGPR1 - Qingping Motion & Ambient light sensor support ( #1675 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 17:06:04 +12:00
Jesse Hills
93796491af
Allow entities to be disabled by default in HA ( #2113 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 13:45:31 +12:00
Oxan van Leeuwen
c038cf27a7
Don't discard cold/warm white brightness in constant brightness mode ( #2136 )
2021-08-10 13:30:29 +12:00
Adrián Panella
06bde559da
Add Dish Network protocol ( #2117 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 13:26:42 +12:00
Keith Burzinski
922f7167f5
Add new Toshiba AC unit protocol ( #1987 )
2021-08-10 13:25:11 +12:00
Keith Burzinski
90c0d3e12f
Add Toshiba AC generic IR remote protocol ( #2019 )
2021-08-10 13:21:10 +12:00
Oxan van Leeuwen
bf5f846fc6
Refactor clang-tidy script to use actual compiler flags and includes ( #2133 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-09 22:43:18 +02:00
Oxan van Leeuwen
926bcc71ae
Only compile protobuf dumping when very verbose logging is enabled ( #2139 )
2021-08-09 22:32:06 +02:00
Jesse Hills
ea4a458214
Removed unused arguments from rgbww code ( #2137 )
2021-08-09 16:44:52 +12:00
buxtronix
fe7af21c91
Anova fahrenheit support ( #2126 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-08-09 08:05:36 +12:00
Sourabh Jaiswal
29f72037fe
Added support for Hitachi AC424 remote type ( #2101 )
2021-08-08 10:59:52 -03:00
Oxan van Leeuwen
1d6b4bfcef
Don't stop effects if brightness goes to zero ( #2134 )
2021-08-07 23:24:47 +12:00
Jesse Hills
cb8a6f66fa
Add state classes to pvvx_mithermometer ( #2125 )
2021-08-05 12:05:36 +12:00
