Keith Burzinski
ab872b075a
Fix PN532 for IDF 5 and ultralight enhancements ( #5352 )
2023-09-07 21:48:44 +12:00
Jesse Hills
87395d259e
Allow "--device SERIAL" on cli to flash only via serial ( #5351 )
2023-09-06 20:22:39 -05:00
Jesse Hills
72f29b1283
Allow upload command to flash file via serial ( #5274 )
2023-09-07 10:15:54 +12:00
Jesse Hills
f2a6f18553
esp32: Extra build customization ( #5322 )
2023-09-06 17:02:21 +12:00
Christian
76ebbfefd2
Integration LightwaveRF switches ( #4812 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-09-06 10:33:49 +12:00
Stijn Tintel
feba9ffdc4
mdns: bump IDF mdns component to 1.2.0 ( #5217 )
2023-09-06 10:11:07 +12:00
JJ
74ab940aff
Adding DFRobot Ozone Sensor Support (sen0321) ( #4782 )
2023-09-06 10:09:22 +12:00
JJ
82c1988a2d
Support MaxBotix XL in addition to HRXL ( #4510 )
2023-09-06 09:59:23 +12:00
Pavlo Dudnytskyi
47735d1dae
Fixed default temperature step values for haier climate ( #5330 )
2023-09-06 07:37:01 +12:00
esphomebot
e2d784a5b5
Synchronise Device Classes from Home Assistant ( #5328 )
2023-09-06 07:29:41 +12:00
Keith Burzinski
b7a16d5a59
Add defines.h to ethernet_component.h for ENABLE_IPV6 ( #5344 )
2023-09-05 22:35:20 +12:00
Jimmy Hedman
97dcbe84da
Disable IPv6 when config explicitly says false ( #5310 )
2023-09-05 02:56:17 -05:00
Clyde Stubbs
32b24726ed
Add Lilygo T-Embed to st7789v display config. ( #5337 )
...
* Add Lilygo T-Embed to st7789v display config.
* Move all configuration into the Python code.
Add presets for TTGO.
All preset configuration can be overridden.
* Add Adafruit S2 pin presets
* Add test
* Add funhouse pins.
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
* Keep ordering of options consistent
* Remove unused declarations
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-09-05 02:01:28 -05:00
Jesse Hills
b11824b058
libretiny: fix uart_port framework config ( #5343 )
2023-09-05 02:33:42 +00:00
kahrendt
562f7c8718
Debug component: add free PSRAM sensor ( #5334 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-09-05 14:02:59 +12:00
mkaiser
d382ca2401
Extend ESP32 CAN bit rates /bus speed support ( #5280 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: mkaiser <mkaiser@techfak.uni-bielefeld.de>
2023-09-05 10:27:58 +12:00
Kuba Szczodrzyński
a9630ac847
Support for LibreTiny platform (RTL8710, BK7231 & other modules) ( #3509 )
...
Co-authored-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Co-authored-by: Sam Neirinck <git@samneirinck.com>
Co-authored-by: David Buezas <dbuezas@users.noreply.github.com>
Co-authored-by: Stroe Andrei Catalin <catalin2402@gmail.com>
Co-authored-by: Sam Neirinck <github@samneirinck.be>
Co-authored-by: Péter Sárközi <xmisterhu@gmail.com>
Co-authored-by: Hajo Noerenberg <hn@users.noreply.github.com>
2023-09-05 10:16:08 +12:00
Keith Burzinski
22c0b0abaa
Tweak Improv serial to build in IDF 5 ( #5331 )
2023-09-04 21:47:53 +00:00
Jimmy Hedman
aabe0091cc
Prepare api and time for ESP-IDF >= 5 ( #5332 )
2023-09-04 15:51:04 -05:00
croessi
3d9af2a67c
Added Handling for Nack "file not found" ( #5338 )
2023-09-05 08:40:46 +12:00
Mat931
5fdafc00e6
Fix checksum calculation for pipsolar ( #5299 )
2023-09-02 21:54:03 +12:00
Christian
2165960ba1
add heating functionality to SI7021 ( #4828 )
...
* add heating functoinality
* add test
* add heat
* fix
* fix
* fix
* fix
* fix
* fix sensor
* restore class
* Update esphome/components/htu21d/sensor.py
* Update esphome/components/htu21d/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/htu21d/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-09-01 19:03:30 -05:00
Clyde Stubbs
2bb5f53b98
Make uart error message go away ( #5329 )
...
* Make error message in log go away.
* Test for IDF version.
2023-09-01 17:10:08 -05:00
kahrendt
211b3eddea
Bugfix: disable channels after IO if multiple tca9548a I2C multiplexers are configured ( #5317 )
2023-09-02 08:55:59 +12:00
Jesse Hills
bec53f97a2
Attempt to fix secret blurring ( #5326 )
2023-09-02 08:41:52 +12:00
Kuba Szczodrzyński
c3332e4a39
Add dashboard API to get firmware binaries ( #4675 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-09-01 18:17:33 +12:00
Josh Barnard
f8a03be2f1
Adding heating coil and fan icons, enum device_class ( #5325 )
...
* Adding heating cool and fan icons.
* Adding Enum device_class as well.
2023-09-01 00:10:42 -05:00
Daniel Dunn
19d53c6643
Use gzip compression for the web server component's static resources ( #5291 )
...
Co-authored-by: Daniel Dunn <dannydunn@eternityforest.com>
2023-09-01 14:02:26 +12:00
Jimmy Hedman
f14419bab5
Bump Arduino Pico to 3.4.0 ( #5321 )
2023-09-01 13:21:01 +12:00
luka6000
3003485dc6
fix to PR # 3887 MQTT connection not using discovery: false ( #5275 )
2023-09-01 13:20:21 +12:00
Clyde Stubbs
01f6791d1c
7789 controller fixes take 2 ( #5320 )
...
* Fix 7789 clock mode and increase clock rate.
* Reverse change from dev.
* Speed up 8 bit color.
* Tweak buffer size
2023-08-31 23:43:24 +00:00
Clyde Stubbs
cdb67fc90e
Add extra SLPOUT for waking up some ST7789 chips ( #5319 )
2023-08-31 09:12:25 +00:00
Keith Burzinski
78cb098691
Add PSRAM mode and speed config ( #5312 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-29 20:50:29 +12:00
J. Nick Koston
45879e3100
Fix legacy zeroconf record update method ( #5294 )
2023-08-29 17:25:43 +12:00
Keith Burzinski
c4adb30ab2
Update PSRAM config params for IDF4+ ( #5298 )
2023-08-29 17:11:58 +12:00
Sebastian Rasor
b20bae23cc
Introduce cv.temperature_delta and fix problematic thermostat configuration behavior ( #5297 )
2023-08-23 13:01:34 +12:00
Christian
11ed2d5f18
Add Invert method for SSD1306 ( #5292 )
2023-08-23 10:13:38 +12:00
Stefan Rado
2a48b810a4
Fix equality check when setting current-based cover position ( #5167 )
2023-08-21 12:35:13 +12:00
Rob Deutsch
0443310385
Bump arduino-heatpumpir to v1.0.23 ( #5269 )
2023-08-21 12:20:00 +12:00
Clyde Stubbs
03ab23fec8
Reserve keyword "clock" ( #5279 )
2023-08-21 12:17:22 +12:00
Jesse Hills
da8afd36b2
Change htu21d sensors from required to optional ( #5285 )
2023-08-21 12:16:14 +12:00
Austin
fe7893d1b3
Support for ESP32-C2 & ESP32-C6 ( #4377 )
...
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
2023-08-21 09:42:03 +12:00
jayme-github
d19bf5d6ee
Add support for ESP32-{S2,S3,C3} to debug component ( #4731 )
2023-08-21 09:34:50 +12:00
Clyde Stubbs
bfdcfa4766
Align SPI data rates in C++ code with Python ( #5284 )
2023-08-21 08:57:02 +12:00
mwolter805
c47c1a7867
Resolve offline ESPs in dashboard when using ESPHOME_DASHBOARD_USE_PING=true ( #5281 )
2023-08-20 12:15:45 -07:00
Jesse Hills
c287e529a8
Change haier from AUTO to HEAT_COOL ( #5267 )
2023-08-18 08:06:21 +12:00
Clyde Stubbs
164d05fdce
Add manufacturer data config to BLE server ( #5251 )
2023-08-18 08:05:25 +12:00
SeByDocKy
c11c4dad2f
Add pmwcs3 capacitive soil moisture & temperature sensor component ( #4624 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-18 08:03:39 +12:00
Jimmy Hedman
0af8d0b7ea
Remove support for ESP-IDF version < 4 ( #5261 )
2023-08-18 08:02:57 +12:00
Mat931
2b4ed0c273
Fix checksum calculation for sml ( #5271 )
2023-08-18 07:57:18 +12:00
Jimmy Hedman
63fc16d872
Add delay before enabling ipv6 ( #5256 )
2023-08-17 12:22:37 +12:00
Regev Brody
5cb5594288
Add configuration flow abilites to the ld2410 component ( #4434 )
2023-08-16 11:31:18 +12:00
Carson Full
87629191b3
Fix IDFI2CBus::writev ignoring stop parameter ( #4840 )
...
Co-authored-by: Alexander Dimitrov <admin@sharkydog.info>
2023-08-16 11:13:43 +12:00
Sergey Dudanov
4a518e3e7a
remote_base: change dumpers log level ( #5253 )
2023-08-16 11:11:44 +12:00
mulder-fbi
6089526975
Fix 24 bit signed integer parsing in sml parser ( #5250 )
2023-08-16 10:52:56 +12:00
Sergey Dudanov
b9e9223fdd
rmt_base additional minor changes ( #5245 )
2023-08-15 07:21:22 +12:00
MrEditor97
e963eedb64
Change XL9535 setup_priority to IO ( #5246 )
2023-08-15 07:14:08 +12:00
MrEditor97
3b2c61e813
Updated my username in Code Owners ( #5247 )
2023-08-15 07:12:03 +12:00
Jesse Hills
2dd4aa7bf6
Fix duplicate tuya time warning ( #5243 )
2023-08-14 10:09:20 +12:00
Kjell Braden
4c1af007ca
tuya: add time sync callback only once to prevent memleak ( #5234 )
2023-08-14 09:09:51 +12:00
Pavlo Dudnytskyi
08013be6dd
Fixing smartair2 protocol implementation if no Wi-Fi ( #5238 )
2023-08-14 09:08:18 +12:00
Sergey Dudanov
0daf4545a9
fix midea: undo approved PR#4053 ( #5233 )
2023-08-14 09:06:04 +12:00
Steve Rodgers
1269bf9791
pca9554 cache reads ( #5137 )
2023-08-12 00:50:33 +00:00
Pavlo Dudnytskyi
5cb21324a1
New features added for Haier integration ( #5196 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-11 05:51:53 +00:00
Jesse Hills
3eef80506b
Expose start to speaker interface ( #5228 )
2023-08-11 16:21:44 +12:00
Samuel Sieb
283d9a0f5f
fix aeha data template ( #5231 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-08-11 16:21:24 +12:00
Jesse Hills
a84365659b
Read string of bool env and match against well known values ( #5232 )
2023-08-11 16:20:58 +12:00
Jesse Hills
db9dc11022
Bump version to 2023.9.0-dev
2023-08-10 17:30:26 +12:00
Keith Burzinski
8e7e8da4a3
Tweak Color init because IDF 5+ ( #5221 )
2023-08-10 17:11:57 +12:00
Samuel Sieb
b56c606523
add value option to timeout filter ( #5222 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-08-10 17:11:03 +12:00
Francesco Ciocchetti
f457269a68
Add missing on_(arming|pending|armed_home|armed_night|armed_away|disarmed) triggers to alarm_control_panel ( #5219 )
2023-08-10 17:09:21 +12:00
matthias882
5b0b9da0b9
Daly BMS improvements ( #3388 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
2023-08-10 17:05:01 +12:00
Greg Cormier
0ed0bdc655
New PM sensor Panasonic SN-GCJA5 ( #4988 )
2023-08-10 17:04:22 +12:00
kahrendt
a8fa4b56f9
New component: Add support for bmp581 pressure and temperature sensors ( #4657 )
2023-08-08 17:05:08 +12:00
Rudd-O
f3329fdc8c
Add KMeterISO component. ( #5170 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-08 12:32:34 +12:00
Francesco Ciocchetti
a6b89e4e8a
Add arm night to alarm control panel ( #5186 )
2023-08-08 11:57:40 +12:00
Stijn Tintel
ffd2cb9814
ledc: check SOC_LEDC_SUPPORT_APB_CLOCK ( #5212 )
2023-08-07 23:47:57 +00:00
Stijn Tintel
4e7011c25d
esp32_ble_beacon: enable CONFIG_BT_BLE_42_FEATURES_SUPPORTED ( #5211 )
2023-08-08 11:18:06 +12:00
Stijn Tintel
f4ac176d77
core: read ESP32 MAC address from eFuse if IEEE802.15.4 is supported ( #5176 )
2023-08-07 22:45:50 +00:00
Jesse Hills
e4cf7b86fa
Add socket define for rp2040 dev ( #4968 )
2023-08-08 10:22:10 +12:00
Stijn Tintel
9876d5276c
i2c: fix build on ESP-IDF >= 5.1 ( #5200 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-08 09:51:22 +12:00
Jesse Hills
0b1b25191d
Add read interface to microphone ( #5131 )
2023-08-08 09:45:56 +12:00
Jimmy Hedman
9980b9972f
Change MQTT client for ESP32 Arduino ( #5157 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-08 09:16:42 +12:00
Trent Houliston
93b7ca77ca
Refactor pulse_meter to better handle higher frequencies ( #4231 )
2023-08-08 08:14:20 +12:00
Lucas Prim
40697fea96
Implemented Waveshare 7.5in B V3 ( #5210 )
2023-08-08 07:31:09 +12:00
Keith Burzinski
fd08f1e23d
Add ESP32-S2/S3 capacitive touch support ( #5116 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-07 13:54:25 +12:00
Paweł Kozubal
3a07121784
Change device name in MQTT discovery messages to friendly names ( #5205 )
2023-08-07 13:46:31 +12:00
André Cirne
1495fada90
Add support for a01nyub ( #4863 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-08-07 12:22:18 +12:00
arno1801
62fed4c1eb
Improved compensation sgp30 ( #5208 )
2023-08-07 11:59:17 +12:00
Jesse Hills
00f9af70a9
Fix some configs after #5181 ( #5209 )
2023-08-07 11:48:23 +12:00
Maciej Sokołowski
0ae3fcb0b7
PWM Output on RP2040 for high frequencies ( #5204 )
2023-08-07 11:41:44 +12:00
Jesse Hills
f81c556b63
Update components "if x in config" ( #5181 )
2023-08-02 16:25:26 +12:00
Jesse Hills
ce8091c14e
Speaker return bytes written and do not wait for queue ( #5182 )
2023-08-02 16:24:52 +12:00
Jesse Hills
581cb642ff
Add get_board function to esp32 module ( #5184 )
2023-08-02 16:24:02 +12:00
Jesse Hills
e02aaedc42
Microphone add is_stopped ( #5183 )
2023-08-02 16:21:30 +12:00
Pavlo Dudnytskyi
8c66de2391
Vertical and horizontal airflow actions fix for Haier climate ( #5164 )
...
Co-authored-by: Pavlo Dudnytskyi <pdudnytskyi@astrata.eu>
2023-08-02 11:06:23 +12:00
Maxime Michel
17be6b106b
Fix graininess & streaks for 7.50inV2alt Waveshare e-paper ( #5168 )
2023-08-01 12:03:34 +12:00
Joris S
9a66199904
invert min_rssi check ( #5150 )
2023-07-31 10:30:21 +12:00
J. Nick Koston
bf732f2a2b
Increase maximum number of BLE notifications ( #5155 )
2023-07-31 10:23:52 +12:00
Jimmy Hedman
c418eecf83
Enable IPv6 for ESP32 Arduino, wifi and ethernet ( #4865 )
2023-07-30 22:20:55 +00:00
Mat931
98bf427600
Add standardized CRC helper functions ( #4798 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-30 21:45:56 +00:00
PlainTechEnthusiast
9aa5ee3372
update "Can't convert" warning to match others in homeassistant_sensor ( #5162 )
2023-07-31 09:40:55 +12:00
cvwillegen
ccb3d3d308
Slightly lower template switch setup priority ( #5163 )
2023-07-31 09:32:09 +12:00
Sergey Dudanov
9ff0471274
duty_time: fix build without binary_sensor. Parented in automations. ( #5156 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-30 21:30:11 +00:00
Stijn Tintel
fdb20e4a30
wifi: handle WIFI_REASON_ROAMING reason in event ( #5153 )
2023-07-31 09:23:30 +12:00
Keith Burzinski
56630bb717
Swap ADC back to use 'int' because C3 ( #5151 )
2023-07-31 09:19:06 +12:00
mullerdavid
08a41d9bd6
Adding Inkplate 6 v2 model variant ( #5165 )
2023-07-31 09:10:46 +12:00
Mat931
cd46a69f2c
Add 'map_linear' and 'clamp' sensor filters ( #5040 )
2023-07-31 09:09:09 +12:00
Sergey Dudanov
794a4bd9a1
remote_base changes ( #5124 )
2023-07-31 08:07:33 +12:00
Sergey Dudanov
a120a455bf
climate triggers Climate and ClimateCall references ( #5028 )
2023-07-31 07:52:01 +12:00
Sergey Dudanov
cd72a2ed7e
Bump clang-tidy from 11 to 14 ( #5160 )
2023-07-31 07:44:56 +12:00
Jimmy Hedman
3eff7e76aa
Prepare some components for idf >= 5 ( #5061 )
2023-07-27 00:18:02 -05:00
esphomebot
959d1944fd
Synchronise Device Classes from Home Assistant ( #5147 )
2023-07-24 07:17:18 +00:00
Jesse Hills
b0966532bf
Allow esp32 idf components to specify submodules and specific components ( #5128 )
2023-07-23 20:22:46 +12:00
Sergey Dudanov
827b2def1e
Coolix IR protocol improvements ( #5105 )
...
* coolix protocol
* tests
* 24-bit range
* some DRY in coolix
* added short condition
* one more change
* final prettify
* v2023.8
2023-07-23 08:15:37 +12:00
Kuba Szczodrzyński
80154b280e
Init colorama in ESPHome main ( #5111 )
2023-07-22 20:25:01 +12:00
Jesse Hills
efd0dd4c3d
Update known boards to 5.4.0 ( #5134 )
2023-07-22 20:24:40 +12:00
esphomebot
c91b775b73
Synchronise Device Classes from Home Assistant ( #5136 )
2023-07-21 22:17:48 +12:00
Jimmy Hedman
1c237aef77
Version bump for ESP32 IDF and Arduino ( #5035 )
2023-07-21 15:35:44 +12:00
Graham Brown
89c5298bb9
Streamer mode ( #5119 )
2023-07-21 08:47:37 +12:00
Jimmy Hedman
76c0d0912f
Change datatype in e131 addressable light ( #5127 )
2023-07-20 15:54:25 +12:00
Jesse Hills
d238155640
Add size getter to CallbackManager ( #5129 )
2023-07-20 12:37:42 +12:00
Kuba Szczodrzyński
973e78355f
Dashboard: use Popen() on Windows ( #5110 )
2023-07-20 08:39:35 +12:00
Jesse Hills
417d45939f
Fix silence detection flag on voice assistant ( #5120 )
2023-07-19 11:38:47 +12:00
voed
837c749cd7
[LD2410] Remove baud_rate check ( #5112 )
2023-07-18 12:50:32 +12:00
PlainTechEnthusiast
b0e286972d
Sigma delta fix ( #4911 )
2023-07-18 12:49:04 +12:00
Kevin P. Fleming
6738295475
airthings_wave: Silence compiler warnings ( #5098 )
2023-07-17 10:43:57 +12:00
bwynants
1617eba764
P1 values for capacity tariff in Belgium ( #5081 )
2023-07-17 10:42:49 +12:00
Clyde Stubbs
ac81fae855
Add timeout filter ( #5104 )
2023-07-17 09:17:31 +12:00
Jesse Hills
8c6cddf1bb
Remove template switch restore_state ( #5106 )
2023-07-17 09:11:43 +12:00
Ilia Sotnikov
508392db6e
[Sprinkler] Resume fixes ( #5100 )
2023-07-16 15:28:31 -05:00
Pierre-Alexis Ciavaldini
3ac0165f00
ESP32 enable ADC2 when wifi is disabled ( #4381 )
...
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-07-17 07:42:01 +12:00
Kamil Trzciński
1691c13b47
display: Add helper methods to Display::clip and Display::clamp_x/y_ ( #5003 )
...
* display: `Rect` make most of methods `const`
* display: add `clip` and `clamp_x/y_` methods for clipping to `Display`
2023-07-14 15:30:19 -05:00
Jimmy Hedman
f8df694aa3
Mk2 to prepare color.h for idf >= 5 ( #5070 )
2023-07-12 19:32:05 -05:00
Jesse Hills
ac05495781
Dont do mqtt ip lookup if use_address has ip address ( #5096 )
...
* Dont do mqtt ip lookup id `use_address` is in config
* Fix after actually testing =)
2023-07-12 19:19:04 -05:00
Jesse Hills
306ab0c56c
Bump version to 2023.8.0-dev
2023-07-13 09:50:48 +12:00
Jesse Hills
844cf316e2
Edit error message for pillow install to add version restrictions ( #5094 )
2023-07-13 09:38:24 +12:00
Lewis Baker
9344d85414
Fix PIDController::in_deadband() to give correct result when error is zero ( #5078 )
2023-07-13 08:57:45 +12:00
Sergey Dudanov
a539197bc4
New 'Duty Time' sensor component ( #5069 )
2023-07-13 08:48:16 +12:00
Sergey Dudanov
eb859e83f8
Fix use of optional<T> ( #5091 )
2023-07-13 08:44:30 +12:00
Pavlo Dudnytskyi
e4a640844c
Fixing colon for tm1637 display if inverted set true ( #5072 )
2023-07-13 08:24:49 +12:00
Christian
119bbba254
Grove amend name ( #5093 )
2023-07-13 08:13:50 +12:00
danieltwagner
8c5978599a
Add support for ATM90E26 ( #4366 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 17:10:22 +12:00
Sergey Dudanov
bbf3d382e8
added uart final validate data bits ( #5079 )
2023-07-12 16:12:40 +12:00
Clyde Stubbs
6d9dbf9e54
Correct message for standard transmission. ( #5088 )
2023-07-12 15:22:52 +12:00
Clyde Stubbs
ec37dece12
Add MCP2515 12MHz xtal support ( #5089 )
2023-07-12 15:12:48 +12:00
Christian
e0fd8cd850
Add support for Grove tb6612 fng ( #4797 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 15:02:53 +12:00
Kevin P. Fleming
cf65bd8ad7
airthings_wave: Battery level reporting ( #4979 )
2023-07-12 13:38:52 +12:00
Stefan Klug
8a9352939a
Fix typo in mpu6050.cpp ( #5086 )
2023-07-12 13:29:38 +12:00
kswt
6ecc1c14d2
tuya_light: fix float->int conversion while setting color temperature ( #5067 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: kswt <kswt@xmpp.is>
2023-07-12 13:28:48 +12:00
Stefan Rado
5f531ac9b0
Add TT21100 touchscreen component ( #4793 )
...
Co-authored-by: Rajan Patel <rpatel3001@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 13:19:19 +12:00
dentra
7a551081ee
web server esp idf suppport ( #3500 )
...
* initial web_server_idf implementation
* initial web_server_idf implementation
* fix lint errors
* fix lint errors
* add captive_portal support
* fix lint errors
* fix lint errors
* add url decode
* Increase the max supported size of headers section in HTTP request
* add ota support
* add mulipart form data support (ota required)
* make linter happy
* make linter happy
* make linter happy
* fix review marks
* add DefaultHeaders support
* add DefaultHeaders support
* unify file names
* using std::isnan
* parse multipart requests only when ota enabled
* parse multipart requests only when ota enabled
* parse multipart requests only when ota enabled
* parse multipart requests only when ota enabled
* parse multipart requests only when ota enabled
* drop multipart request support
* drop multipart request support
* drop multipart request support
* OTA is disabled by default
* fail when OTA enabled on IDF framework
* changing file permissions to remove execute bit
* return back PGM_P and strncpy_P macro
* temp web_server fix to be compat with 2022.12
* fix config handling w/o web_server
* fix compilation with "local"
* fully remove all idf ota
* merge with esphome 2023.6
* add core/hal to web_server_base
* Update esphome/components/web_server_base/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update __init__.py
* Update __init__.py
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-11 19:08:03 -05:00
KoenBreeman
74139985c9
RTC implementation of pcf8563 ( #4998 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-12 09:19:28 +12:00
jan-hofmeier
f3cdcc008a
Add Alpha3 pump component ( #3787 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-07-11 17:12:43 +12:00
kahrendt
a391815921
Add Zio Ultrasonic Distance Sensor Component ( #5059 )
2023-07-11 16:24:18 +12:00
Kamil Trzciński
98fd092053
display: rename DisplayBufferRef to DisplayRef ( #5002 )
2023-07-10 16:38:28 -05:00
Jimmy Hedman
ddde1ee31e
Allow pillow versions over 10 ( #5071 )
2023-07-10 11:34:43 +12:00
Jimmy Hedman
c5aacdd682
Update RP2040 Aruino framwork and platform to latest ( #5025 )
2023-07-10 11:30:39 +12:00
Trevor North
8ca9115dc8
Improve BME680 BSEC sensor device classes ( #4859 )
2023-07-10 10:03:54 +12:00
Fabian
8bf8892ab3
[Ethernet] ksz8081rna support ( #4739 )
...
Co-authored-by: Your Name <you@example.com>
2023-07-10 10:02:42 +12:00
Kevin P. Fleming
8739552c0b
binary_sensor: Validate max_length for on_click/on_double_click ( #5068 )
2023-07-10 09:55:02 +12:00
J. Nick Koston
e6834f25ed
Fix bulk and single Bluetooth parser coexistence ( #5073 )
2023-07-10 09:08:46 +12:00
NP v/d Spek
f9fc438de8
Fixed ili9xxx_display update() method ( #5013 )
...
There was an obsolete `if` statement left over from an other implementation.
2023-07-05 20:58:04 -05:00
Kamil Trzciński
677b2c6618
display: split DisplayBuffer and Display ( #5001 )
2023-07-05 14:33:26 -05:00
Tobias Oort
301a78f983
Adds 1.54" e-ink display (gdew0154m09) support to waveshare_epaper component ( #4939 )
...
* Added GDEW0154M09 in waveshare_epaper component
* noop change - trigger workflow
* Make linter happy
* Update test4.yaml
* linter doing linty things
* revert the newline removal.
* revert to prove unstable test
* add code back into test.
* no partial updates supported yet - removed from test.
* Update esphome/components/waveshare_epaper/waveshare_epaper.cpp
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-07-05 14:32:00 -05:00
Jimmy Hedman
979f014799
Make scheduler debuging work with idf >= 5 ( #5052 )
2023-07-05 22:05:27 +12:00
Fabian
a326dcaf0e
[ili9xxx] Allow config of spi data rate. ( #4701 )
...
* Allow 80MHz ili9xxx display.
* python foo.
* update based on feedback.
* Change python
---------
Co-authored-by: Your Name <you@example.com>
2023-07-05 02:53:14 -05:00
lnicolas83
5bf2fa5c56
[ILI9xxx] Add ili9488_a (alternative gamma configuration for ILI9488) ( #5027 )
...
* Add ili9488_a
* Fix clang-tidy
2023-07-04 19:21:26 -05:00
Jesse Hills
22a1134f0e
Fix when idf component has broken symlinks ( #5058 )
2023-07-05 10:31:58 +12:00
Jimmy Hedman
fc3d558d47
Initial debug component support for rp2040 ( #5056 )
2023-07-05 10:28:12 +12:00
Jesse Hills
45c72f1f22
Log start of i2c setup ( #5049 )
2023-07-04 15:26:31 +12:00
Jesse Hills
fd9cca565b
Log component long time message at warning level ( #5048 )
2023-07-04 15:02:53 +12:00
Jesse Hills
d64d1650e3
Update webserver to ea86d81 ( #5023 )
2023-07-04 13:45:06 +12:00
J. Nick Koston
a74abb8ea8
Adjust signature for on_disconnect ( #5009 )
2023-07-04 12:57:44 +12:00
Fabian
e74ab00b3e
Mopeka std fixes ( #5041 )
...
Co-authored-by: Your Name <you@example.com>
2023-07-04 12:55:04 +12:00
J. Nick Koston
2e2ac53071
Advertise noise is enabled ( #5034 )
2023-07-04 12:52:42 +12:00
Jimmy Hedman
87c0f48095
Prepare debug and logger component to work with idf 5.0 ( #5036 )
2023-07-04 12:49:27 +12:00
Jimmy Hedman
25b9bde0a5
Prepare ethernet to work with esp idf 5.0 ( #5037 )
2023-07-04 12:48:05 +12:00
guillempages
63d3a0e8b3
Improve the gamma settings for the S3-Box-lite display ( #5046 )
2023-07-04 12:43:03 +12:00
Graham Brown
4cc0f3fd53
Add alarm to reserved ids ( #5042 )
2023-07-04 12:28:19 +12:00
Sergey Dudanov
5b2176562b
binary_sensor filters templatable delays ( #5029 )
2023-07-04 12:25:48 +12:00
Sergey Dudanov
099dc8d1d2
fix template binary_sensor publish_initial_state option ( #5033 )
2023-07-04 12:18:51 +12:00
Sergey Dudanov
cf98c497d5
binary_sensor removed unused filter ( #5039 )
2023-07-03 10:35:53 +12:00
Ryan DeShone
807621402d
[SCD30] Disable negative temperature offset ( #4850 )
2023-06-29 11:42:39 +12:00
Jesse Hills
951157dc26
Add CONFIG_BT_BLE_42_FEATURES_SUPPORTED for ble ( #5008 )
2023-06-28 11:35:35 +12:00
Jesse Hills
68119ddcd4
Attempt to fix script parameters ( #4627 )
2023-06-28 11:34:08 +12:00
F.D.Castel
c82be2cd60
Fixes compressed downloads ( #5014 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-28 11:13:14 +12:00
esphomebot
9a149a7aba
Synchronise Device Classes from Home Assistant ( #5018 )
2023-06-27 22:19:36 +00:00
jerome992
bd9a4ff8de
add water delivered to dsmr component ( #4237 )
...
Co-authored-by: Jerome <jerome992@internet.lu>
2023-06-27 15:35:20 -03:00
Philippe Vlérick
d9398a91d1
update dsmr to 0.7 ( #5011 )
2023-06-26 17:09:52 -03:00
Jesse Hills
ef84937fd6
Update webserver to 56d73b5 ( #5007 )
2023-06-26 10:27:03 +12:00
Kamil Trzciński
8a1c49a4ae
display: move Image, Font and Animation code into components ( #4967 )
...
* display: move `Font` to `components/font`
* display: move `Animation` to `components/animation`
* display: move `Image` to `components/image`
2023-06-24 17:56:29 -05:00
Jesse Hills
eb145757e5
Fix rp2040 pio tool download ( #4994 )
2023-06-23 16:42:37 +12:00
Samuel Sieb
fc0e1a3cb9
remove unused static declarations ( #4993 )
2023-06-23 13:03:31 +12:00
Kamil Trzciński
85608a8ab7
display: fix white screen on binary displays ( #4991 )
2023-06-22 14:18:29 -05:00
Jimmy Hedman
52d7d2cae7
Make ethernet_info work with esp-idf framework ( #4976 )
2023-06-22 16:09:00 +12:00
F.D.Castel
f72b07eb0e
dashboard: Adds "compressed=1" to /download.bin endpoint. (...) ( #4966 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-22 11:48:17 +12:00
J. Nick Koston
314c1c8b5c
Migrate VOC sensors that use ppb to use volatile_organic_compounds_parts device class ( #4982 )
2023-06-22 11:45:41 +12:00
Jesse Hills
211453df43
Update webserver and captive portal pages to 67c48ee9 ( #4986 )
2023-06-22 10:12:25 +12:00
Dion Hulse
1cc7428445
Add configuration option to disable the log UI. ( #4419 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-22 09:58:49 +12:00
Onne
9e7e3708e3
Make growatt play nicer with other modbus components. ( #4947 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-21 00:22:32 +00:00
Kevin P. Fleming
8bd9f50659
airthings_wave: refactor to eliminate code duplication ( #4910 )
2023-06-21 11:53:44 +12:00
Stijn Tintel
cb5a01da29
mqtt: add ESP-IDF >= 5.0 support ( #4854 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-20 23:53:32 +00:00
Martin Murray
bfe85dd710
Apply configured IIR filter setting in generated BMP280 code ( #4975 )
...
Co-authored-by: Martin Murray <murrayma@gmail.com>
2023-06-21 11:53:21 +12:00
guillempages
ee12c68b8f
Add actions to animation ( #4959 )
2023-06-20 10:50:02 +12:00
Jimmy Hedman
7ceb16cc5a
Preprocess away unused code when IPv6 is disabled ( #4973 )
2023-06-20 10:34:46 +12:00
MrEditor97
41a618737b
XL9535 I/O Expander ( #4899 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-19 15:26:06 +12:00
Carson Full
67771abc9d
Add read/write for 16bit registers ( #4844 )
2023-06-19 14:10:05 +12:00
Stanislav Habich
b346ad8080
Update pca9685_output.cpp ( #4929 )
2023-06-19 13:56:12 +12:00
J. Nick Koston
cd57271386
Construct web_server assets at build time instead of run time ( #4944 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-19 13:51:19 +12:00
J. Nick Koston
b9f20b36cb
Store app comment and compilation_time in flash ( #4945 )
2023-06-19 11:35:47 +12:00
Kamil Trzciński
62d2640c37
display: move Rect into rect.cpp/.h ( #4957 )
2023-06-18 23:32:39 +00:00
Kamil Trzciński
54eb52c19a
display/font: optimise font rendering by about 25% ( #4956 )
2023-06-18 23:29:43 +00:00
Hawawa McTaru
77a7d3f24b
Fix for Fujitsu AC not having Quiet Fan Mode ( #4962 )
2023-06-19 11:20:32 +12:00
Kamil Trzciński
8c9d63f48f
display: add BaseFont and introduce Font::draw methods ( #4963 )
2023-06-19 11:04:19 +12:00
Pavlo Dudnytskyi
5a8e93ed0a
Upgraded Haier climate component implementation ( #4521 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Pavlo Dudnytskyi <pdudnytskyi@astrata.eu>
Co-authored-by: esphomebot <esphome@nabucasa.com>
2023-06-19 10:24:52 +12:00
Jesse Hills
d4099d68a7
Use HW SPI for rp2040 ( #4955 )
2023-06-19 07:24:44 +12:00
Kamil Trzciński
e1b0d86098
display: allow to align image with ImageAlign ( #4933 )
2023-06-19 07:24:23 +12:00
guillempages
1a7f121ac6
Add support for ESP32-S3-BOX displays ( #4942 )
...
The ESP32-S3-BOX display has an ILI9xxx driver
Add the needed configuration so that it works.
2023-06-17 03:38:44 -05:00
guillempages
ffa669899a
Split display_buffer sub-components into own files ( #4950 )
...
* Split display_buffer sub-components into own files
Move the Image, Animation and Font classes to their own h/cpp pairs,
instead of having everything into the display_buffer h/cpp files.
* Fixed COLOR_ON duplicate definition
2023-06-17 03:32:07 -05:00
guillempages
17fed954bf
Add support for ESP32-S3-BOX-Lite displays ( #4941 )
2023-06-16 11:39:50 +12:00
Samuel Sieb
467e42d8aa
fix vbus sensor offsets ( #4952 )
2023-06-15 01:05:28 -07:00
Clyde Stubbs
a023f24a08
Add support in vbus component for Deltasol BS 2009 ( #4943 )
2023-06-14 23:51:44 -07:00
Jesse Hills
27f69f5439
Bump version to 2023.7.0-dev
2023-06-15 14:25:36 +12:00
Graham Brown
54474e5b33
Add Alarm Control Panel ( #4770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-15 12:34:39 +12:00
Kamil Trzciński
0411d52420
display: add BaseImage and provide only Image::get_pixel method ( #4932 )
2023-06-15 11:15:46 +12:00
Kamil Trzciński
cef659b0de
display: Improve Image rendering by removing usage of virtual functions ( #4931 )
2023-06-15 09:50:24 +12:00
Jesse Hills
035c3ef8fe
Add MULTI_CONF to pn53_i2c ( #4938 )
2023-06-13 15:30:40 -05:00
Carlos Cordero
5afdb1e97f
I2S media player allow setting communication format for external DACs ( #4918 )
...
Co-authored-by: Carlos Cordero <ccordero@bkool.com>
2023-06-13 07:48:01 +12:00
Pascal
0a407c5425
[max7219digit] fix 270° rotation ( #4930 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-06-12 16:59:25 +12:00
guillempages
c74105aad7
Add SVG image support ( #4922 )
2023-06-12 09:36:37 +12:00
RoboMagus
5f0892dec4
Allow multiple MAC addresses for 'on_ble_advertise' filter ( #4773 )
2023-06-09 12:53:30 +12:00
Jesse Hills
302dea4169
Move ESPTime into core esphome namespace ( #4926 )
...
* Prep-work for datetime entities
* Fix some includes and remove some restrictions on printing time on displays
* format
* format
* More formatting
* Move function contents
* Ignore clang-tidy
2023-06-08 17:24:44 -05:00
Jesse Hills
ce13979690
Bluetooth Proxy: Raw bundled advertisements ( #4924 )
2023-06-09 07:41:09 +12:00
Simone Rossetto
d1253922c3
Increase SNTP setup priority ( #4917 )
2023-06-07 10:38:18 +12:00
guillempages
6b00622329
Add support for mdi images ( #4654 )
2023-06-07 09:32:21 +12:00
PlainTechEnthusiast
aeb94e166b
Support for Adafruit ESP32-S2 TFT Feather ( #4912 )
...
Support for optional PowerSupply component for ST7789V
This commit makes the power supply required if the model configured in the ST7789V component is set to ADAFRUIT_S2_TFT_FEATHER_240X135. There are at least two boards from Adafruit with this configuration but with a different pin out.
This also adds the board pins definition for the board I have. There is discussion on the forums about the other board's documentation not matching reality and I don't have a physical board to confirm.
2023-06-03 16:07:24 -05:00
Nick Owens
8bb4c65272
prometheus: fix compilation with EntityBase ( #4895 )
2023-06-01 14:31:58 +12:00
Jesse Hills
b06bdc2da3
Allow WIFI to be disabled and enabled ( #4810 )
...
Co-authored-by: Péter Sárközi <xmisterhu@gmail.com>
Co-authored-by: Ash McKenzie <ash@the-rebellion.net>
2023-06-01 11:34:35 +12:00
Jesse Hills
1ea5d90ea3
Continuous voice_assistant and silence detection ( #4892 )
2023-05-31 16:30:53 +12:00
Stijn Tintel
f9f335e692
light: fix compile with ESP-IDF >= 5 ( #4855 )
2023-05-31 13:49:31 +12:00
Stijn Tintel
3ead48f0db
ota: fix TWDT with ESP-IDF >= 5 ( #4858 )
2023-05-31 13:48:34 +12:00
Stijn Tintel
ccba94197d
ota: fix compile with ESP-IDF >= 5 ( #4857 )
2023-05-31 13:47:11 +12:00
Stijn Tintel
796b64541f
esp32_rmt_led_strip: fix compile with ESP-IDF >= 5 ( #4856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-30 11:07:36 +12:00
Regev Brody
7dcdf80f49
add SUB_SWITCH macro ( #4898 )
2023-05-29 09:44:35 +12:00
Regev Brody
57023457ee
add SUB_SELECT macro ( #4897 )
2023-05-29 09:44:05 +12:00
Jesse Hills
ebad407586
Fix version printing not breaking yaml parsing ( #4904 )
2023-05-28 21:18:01 +00:00
Samuel Sieb
71387846dc
move pio tools to LED component ( #4903 )
2023-05-28 20:49:27 +00:00
Sybren A. Stüvel
97c1c34708
Add support for TMP1075 temperature sensor ( #4776 )
...
* Add support for TMP1075 temperature sensor
TMP1075 is a temperature sensor with I2C interface in industry standard
LM75 form factor and pinout.
https://www.ti.com/product/TMP1075
Example YAML:
```yaml
sensor:
- platform: tmp1075
name: TMP1075 Temperature
id: radiator_temp
update_interval: 10s
i2c_id: i2c_bus_1
conversion_rate: 27.5ms
alert:
limit_low: 50
limit_high: 75
fault_count: 1
polarity: active_high
```
* Add myself as codeowner of the TMP1075 component
* Include '°C' unit when logging low/high limit setting
* Reformat
No functional changes.
* Fix logging: use %.4f for temperatures, not %d
* Fix config initialisation
* Use relative include for `tmp1075.h`
* Apply formatting changes suggested by script/clang-tidy for ESP32
* Add YAML to test1.yaml
* Fix test1.yaml by giving TMP1075 a name
* Less verbose logging (debug -> verbose level)
* Schema: reduce accuracy_decimals to 2
* I2C address as hexadecimal
* Proper name for enum in Python
The enum on the C++ side was renamed (clang-tidy) but I forgot to take that
into account in the Python code.
* Expose 'alert function' to the code generator/YAML params and remove 'shutdown'
Shutdown mode doesn't work the way I expect it, so remove it until someone
actually asks for it.
Also 'alert mode' was renamed to 'alert function' for clarity.
* Move simple setters to header file
* Remove `load_config_();` function
2023-05-26 00:01:21 -05:00
Jesse Hills
79abd773a2
Allow i2s microphone bits per sample to be configured ( #4884 )
2023-05-26 15:50:44 +12:00
guillempages
9cd173ef83
Allow partially looping animations ( #4693 )
...
Add the possibility of specifying a "loop" in an animation; where the
requested frames (start - end) will be repeateadly shown for "count" times.
2023-05-25 16:49:52 -05:00
Rajan Patel
bb044a789c
Add i2s mclk ( #4885 )
2023-05-24 19:28:08 +12:00
Jesse Hills
2153cfc749
Fix esp32_rmt_led_strip color modes ( #4886 )
2023-05-24 02:20:06 -05:00
Jesse Hills
2e8b4fbdc8
Fix rp2040_pio_led_strip color modes ( #4887 )
2023-05-24 02:19:49 -05:00
Samuel Sieb
4141100b1c
fix modbus sending FP32_R values ( #4882 )
2023-05-23 15:00:33 -07:00
Jesse Hills
baa08160bb
Print ESPHome version when running commands ( #4883 )
2023-05-23 21:56:15 +00:00
Davrosx
35ef4aad60
Update cover.h for compile errors with stop() ( #4879 )
2023-05-24 07:52:34 +12:00
Fabian
ffa5e29dab
[internal_temperature] ESP32-S3 needs ESP IDF V4.4.3 or higher ( #4873 )
...
Co-authored-by: Your Name <you@example.com>
2023-05-24 07:51:12 +12:00
Evgeny
28b5c535ec
add codeowners ( #4875 )
2023-05-22 22:28:35 +00:00
Fabian
ed8aec62fc
[PSRam] Change log unit to KB to minimize rounding error. ( #4872 )
...
Co-authored-by: Your Name <you@example.com>
2023-05-23 08:43:03 +12:00
Jesse Hills
f7b5c6307c
Allow microphone channel to be specified in config ( #4871 )
2023-05-23 07:02:16 +12:00
Lucas Reiners
40d110fc3f
Update ili9xxx_init.h for correct white balance ( #4849 )
2023-05-22 23:24:17 +12:00
Daniel Mahaney
a15ac06771
Rp2040 pio ledstrip ( #4818 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-22 10:31:27 +12:00
Stefan Rado
784cc3bc29
Fix i2s_audio media_player mutex acquisition ( #4867 )
...
Co-authored-by: Rajan Patel <rpatel3001@gmail.com>
2023-05-22 08:10:23 +12:00
guillempages
8a518f0def
Add transparency support to all image types ( #4600 )
2023-05-22 08:03:21 +12:00
Keith Burzinski
c61a3bf431
Sprinkler fixes ( #4816 )
2023-05-18 11:36:52 +12:00
Jesse Hills
1b77996ccd
Remove i2c dependency from ttp229_bsf ( #4851 )
2023-05-18 11:34:18 +12:00
Jesse Hills
9e3ecc8372
Migrate e131 to use socket instead of WiFiUDP arduino library ( #4832 )
2023-05-18 08:41:21 +12:00
Lukas Lindner
c96663daca
Insert Europe Tank Types from mopeka_std_check ( #4757 )
2023-05-17 16:41:53 +12:00
Joel Goguen
b3ed988119
Allow substitutions to be valid names ( #4726 )
2023-05-17 16:33:08 +12:00
Carson Full
77695aa55b
Move some I2C logic out of header file ( #4839 )
2023-05-17 16:32:20 +12:00
Markus
c5a45645a6
allow to use MQTT for discovery of IPs if mDNS is no option ( #3887 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-17 16:29:56 +12:00
Christian
0de47e2a4e
Add DNS to Text info ( #4821 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-17 16:29:21 +12:00
Samuel Sieb
edfd82fd42
handle Wiegand 8-bit keys ( #4837 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-05-17 09:30:14 +12:00
Samuel Sieb
492bad645b
support sending keys to the collector ( #4838 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-05-16 23:36:02 +12:00
github-actions[bot]
d7fd23d8a8
Synchronise Device Classes from Home Assistant ( #4825 )
...
Co-authored-by: esphomebot <esphome@nabucasa.com>
2023-05-15 23:13:17 +00:00
Justin Gerace
d0ca69bc27
Start UART assignment at UART0 if the logger is not enabled or is not configured for hardware logging on ESP32 ( #4762 )
2023-05-16 11:00:05 +12:00
Federico G. Schwindt
8e4aeec3bd
Fix time period validation for the auto cleaning interval ( #4811 )
2023-05-16 10:28:01 +12:00
Christian
ae838b13a8
Update PulseLightEffect with range brightness ( #4820 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-16 08:29:00 +12:00
RoboMagus
b1551d0436
Fix missing stop trait in send_cover_info ( #4826 )
2023-05-16 08:24:03 +12:00
Jesse Hills
1d8227788b
Dontr try stop if not actually started ( #4814 )
2023-05-15 10:11:48 +12:00
Jesse Hills
5fdd8440ac
Fix i2s media player volume control ( #4813 )
2023-05-13 00:19:06 -05:00
richardhopton
5d8daa6990
Tuya: Prevent loop when setting colors on case-sensitive dps ( #4809 )
...
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
2023-05-13 15:16:28 +12:00
Federico G. Schwindt
cf802d0d38
Wording ( #4805 )
2023-05-12 13:46:47 +12:00
Alex Dekker
9cbf437509
Supposed to fix #4069 , by changing the default value to 0s (timeunit instead of int) to pass validation ( #4806 )
...
Co-authored-by: Alex1602 <alex1602@gmail.com>
2023-05-11 16:25:34 -05:00
NP v/d Spek
cd7e8e4bdd
Add minimum RSSI check to ble presence ( #4646 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-12 04:28:24 +12:00
Jesse Hills
ed024a0aa5
Remove AUTO_LOAD from apds9960 ( #4746 )
2023-05-11 11:33:59 +12:00
Jimmy Hedman
5b02715c7b
Fixed access point for ESP32 IDF platform ( #4784 )
2023-05-11 10:00:28 +12:00
Jesse Hills
3b0eea69ce
Bump version to 2023.6.0-dev
2023-05-11 09:38:21 +12:00
Jesse Hills
97a71482a9
Validate project details are set for dashboard_import ( #4802 )
2023-05-11 08:55:05 +12:00
Jesse Hills
8822b6c808
Make i2s_audio bclk_pin optional ( #4801 )
2023-05-11 07:17:59 +12:00
Jesse Hills
5099595aee
Wrap VA code ( #4800 )
2023-05-10 16:46:32 +12:00
Jesse Hills
39a650ee54
Add more configuration for microphones - i2s/pdm/adc ( #4775 )
2023-05-10 16:37:21 +12:00
Jimmy Hedman
b19c7d462b
Fixed calculation of start and end dhcp range ( #4785 )
2023-05-10 13:03:43 +12:00
Fabian
a8b821c213
[display] Small display print performance improvement ( #4788 )
2023-05-10 12:47:24 +12:00
Fabian
535003014b
Keep Unit of Measurement in Flash. ( #4719 )
...
Co-authored-by: Your Name <you@example.com>
2023-05-10 11:42:55 +12:00
Jesse Hills
c835b67bac
Add host target platform ( #4783 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2023-05-10 11:38:18 +12:00
Fabian
8c32941428
[ili9xxx] Improve fill operation performance ( #4702 )
...
Co-authored-by: Your Name <you@example.com>
2023-05-10 11:19:28 +12:00
Alfredo
b5dac00dcb
Fix ezo parsing ( #4792 )
2023-05-10 11:16:14 +12:00
bouhaa
ffdc721c79
SM2135 Add optional current configuration, avoid communication failures. ( #3850 )
...
Co-authored-by: matika77 <xmaximx@gmx.net>
Co-authored-by: Dion <contact@dd32.id.au>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-10 11:06:26 +12:00
Jesse Hills
0828a9fc11
Bump ESP32-audioI2s to 2.0.7 ( #4796 )
2023-05-10 09:13:01 +12:00
Jesse Hills
4b664b6f09
Create esp32 rmt addressable light driver ( #4708 )
2023-05-09 09:33:43 +12:00
Jesse Hills
679633245d
Add gp8403 output component ( #4495 )
...
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
2023-05-08 12:45:12 +12:00
Jesse Hills
ce8a77c765
Speaker support ( #4743 )
2023-05-08 10:36:17 +12:00
Chris Nussbaum
c4539e10fb
Revert "Template sensors always publish on update interval ( #2224 )" ( #4774 )
2023-05-04 10:16:00 +12:00
Tim Niemueller
2b3052e9d7
Fixes for Arduino 2.7.4 (for FastLED) ( #4777 )
2023-05-04 10:13:30 +12:00
Jesse Hills
4a3f9712b2
Fix i2s media player on devices with no internal DAC ( #4768 )
2023-05-02 16:57:40 +12:00
looping40
de10b356cf
Max6956 support added ( #3764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-02 09:51:48 +12:00
cooki35
bd6d6caa8a
Add support for V2 of the waveshare 5.83in e-paper display. ( #3660 )
2023-05-02 09:36:20 +12:00
Mat931
1c4af08ed3
Add support for BLE passkey authentication ( #4258 )
...
Co-authored-by: Branden Cash <203336+ammmze@users.noreply.github.com>
2023-05-02 09:25:10 +12:00
Philippe FOUQUET
c97d361b6c
Add support for hyt271 ( #4282 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-05-01 16:18:31 +12:00
marshn
379b1d84dd
RF Codec for Drayton Digistat heating controller ( #4494 )
2023-05-01 16:12:53 +12:00
Luis Andrade
c13e20643b
play_folder bugfix and addition of play_mp3 ( #4758 )
2023-05-01 16:01:24 +12:00
Mat931
76b6fcf554
Add PCA6416A Support ( #4681 )
2023-05-01 16:00:21 +12:00
Jesse Hills
56e0923c22
Switch ESPAsyncTCP-esphome to esphome fork ( #4764 )
2023-05-01 11:09:01 +12:00
tracestep
f4b98f5e32
Power down PN532 before deep sleep ( #4707 )
2023-05-01 09:24:15 +12:00
Keith Burzinski
c2a43c733a
Fix sprinkler switch restore_mode ( #4756 )
2023-05-01 07:52:05 +12:00
RoboMagus
568e65a6ab
Fix assumed_state switch webserver ( #4259 )
2023-05-01 07:28:21 +12:00
itpeters
70aa38f5bd
Don't allow fingerprint_grow enroll cancellation when no enrollment started ( #4745 )
2023-04-27 16:34:20 +12:00
Jesse Hills
55ec082628
Only request VA port from first client that is subscribed ( #4747 )
2023-04-27 04:22:12 +00:00
Jesse Hills
6f27126c8d
Move am43 sensor code and remove auto load on cover ( #4631 )
2023-04-27 13:24:42 +12:00
Jesse Hills
ee21a91313
Add mlx90614 sensors ( #3749 )
...
Co-authored-by: Greg Arnold <greg@arnoldassociates.com>
Co-authored-by: notsonominal <130870838+notsonominal@users.noreply.github.com>
2023-04-27 13:17:09 +12:00
Jesse Hills
c5efaa1c00
Remove climate legacy away flags ( #4744 )
2023-04-27 13:11:32 +12:00
Jesse Hills
6476357596
Expand the platformio dep installer to also install platforms and tools ( #4716 )
2023-04-27 12:26:06 +12:00
RoboMagus
64afb07e91
Fix 'blutooth' typo in esp32_ble component ( #4738 )
2023-04-27 10:48:53 +12:00
Keith Burzinski
f639f7c280
Add on_tag_removed trigger for RC522 ( #4742 )
2023-04-27 10:47:45 +12:00
Jimmy Hedman
986dd2ddd2
Debug component doesn't work on RP2040 ( #4728 )
2023-04-27 08:03:30 +12:00
gcopeland
7abdb5d046
I2c scan recovery reset fix ( #4724 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-27 08:00:37 +12:00
Alexander Momchilov
bef5b38d49
Add supports_stop trait to Cover ( #3897 )
...
* Add "stop" trait to Cover
* Add `supports_stop` to Cover protobuf msg
* Run `script/api_protobuf/api_protobuf.py`
... followed by `script/clang-format -i`
* Add `has_stop` field to template Cover
* Set `has_stop` during Cover codegen
* Set `supports_stop` trait on all other Cover types
* Bump APIVersion to 1.8
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-23 20:51:32 +00:00
Rebbe Pod
0a95f116fc
Get Sunrise & Sunset for a Specific Date ( #4712 )
...
* Update real_time_clock.cpp
* Update real_time_clock.h
* Update sun.h
* Update sun.h
* Update sun.h
* Enable the sunAtLocation to be used externally
* Enable the sunAtLocation to be used externally
* Update sun.h
* Update sun.h
* update
* update
* update to only use one function
* Update sun.h
* Update sun.cpp
2023-04-23 20:44:35 +00:00
Jesse Hills
327cd662b4
Use proper schema for delta filter ( #4723 )
2023-04-23 20:42:46 +00:00
Samuel Sieb
bb05ba3d00
fix flip_x ( #4727 )
2023-04-22 07:41:12 +00:00
Keith Burzinski
c0ad5d1d16
Initial attempt at supporting ESP-IDF 5.0.0 ( #4364 )
...
* requirements: add pyparsing >= 3.0
ESP-IDF >= 5.0 requires pyparsing's rest_of_file, which was introduced
in version 3.0.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* esp32: fix build with ESP-IDF >= 5
We need to include esp_timer.h to be able to use esp_timer_get_time().
This header existed in ESP-IDF < 5 so we don't need if guards.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ota: fix build with ESP-IDF >= 5
As of version 5, esp_task_wdt_init() takes a struct as argument. We also
need to include spi_flash_mmap.h.
[split unrelated change into separate commits, maintain ESP-IDF < 5
compat, use esp_task_wdt_reconfigure, add commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* core: fix build with ESP-IDF >= 5
These header files already existed in ESP-IDF < 5 so skip if guards.
[add commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* wifi: fix build with ESP-IDF >= 5
ESP-IDF 4.1 introduced the esp-netif API as successor to the tcp_adapter
API. The tcp_adapter API was removed in ESP-IDF 5.0.0. Part of the wifi
component was already migrated to the new API. Migrate the leftover uses
of the old API to the new API to fix build on ESP-IDF >= 5.
The version of ESP-IDF currently in use (4.4.4) supports the new API, so
we don't need any if guards to maintain backwards compatibility.
Also replace xQueueHandle, which is a pre FreeRTOS v8.0.0 data type,
with QueueHandle_t, so we don't need to enable backward compatibility
(CONFIG_FREERTOS_ENABLE_BACKWARD_COMPATIBILITY).
This reverts part of commit d42f35de5d
2023-04-20 03:54:06 +00:00
Bella Coola
4c39631428
Add support for passive WiFi scanning ( #4666 )
...
* Add support for passive WiFi scanning.
* Apply suggestions from code review
Made changes suggested by @jesserockz
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: BellaCoola <unknown>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-20 03:53:42 +00:00
Fabian
afc2b3b74f
Keep Device Class in Flash. ( #4639 )
...
* Keep Device Class in Flash.
* Remove blank line
---------
Co-authored-by: Your Name <you@example.com>
2023-04-20 03:53:35 +00:00
Jesse Hills
0f7e34e7ec
Bump arduino platform version to 5.3.0 ( #4713 )
...
* Bump arduino platform version to 5.3.0
* Update root platformio.ini
2023-04-20 00:44:49 +00:00
tracestep
2be703b329
Add ethernet powerdown (fixes esphome/issues#4420) ( #4706 )
...
* Add ethernet powerdown
* Add on_shutdown (fixes esphome/issues#4420
* Sync dev and clang-tidy fix
* fix typo and trainling space
* Initialize phy_ member
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Use `this` pointer
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Member initialized at declaration
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Use `this` pointer
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Use `this` pointer
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-19 22:10:01 +00:00
Jesse Hills
4cea74ef3b
Call on_error if no api client connected that handles voice ( #4709 )
2023-04-19 20:56:37 +00:00
Jesse Hills
3a587ea0d4
Add event triggers to voice_assistant ( #4699 )
...
* Add event triggers to voice_assistant
* Add triggers to test
2023-04-17 02:57:28 +00:00
Szewcson
8a60919e1f
Add timeout to i2c write error logs ( #4697 )
2023-04-16 20:12:13 +00:00
Jimmy Hedman
382dcddf12
Fixed dns2 for ethernet ( #4698 )
2023-04-16 20:10:07 +00:00
Jesse Hills
6b67acbeb5
debug component, allow without debug logging ( #4685 )
2023-04-14 02:29:28 +00:00
kahrendt
afc848bf22
Add Bayesian type for binary_sensor_map component ( #4640 )
...
* initial support for Bayesian type
* Cast bool state of binary_sensor to uint64_t
* Rename channels to observations with Bayesian
* Improve/standardize comments for all types
* Use black to correct sensor.py formatting
* Add SUM and BAYESIAN binary sensor map tests
* Remove unused variable
* Update esphome/components/binary_sensor_map/binary_sensor_map.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-13 01:48:29 +00:00
Jesse Hills
04a139fe3d
Bump version to 2023.5.0-dev
2023-04-13 10:13:53 +12:00
spacemanspiff2007
4eb69d6af5
Fix restore ( #4655 )
...
* ALWAYS_OFF for fan
* ALWAYS_OFF for light
* ALWAYS_OFF for switch
2023-04-12 21:28:02 +00:00
Fabian
0547f2a931
Add KSZ8081 support. ( #4668 )
...
Co-authored-by: Your Name <you@example.com>
2023-04-12 21:22:08 +00:00
unhold
b5fbe0b145
Fix cut-off on 2.13" waveshare/ttgo epaper displays ( #4255 )
...
The controller of the 2.13" waveshare/ttgo epaper displays operates with a 128x250 buffer,
while only 122x250 pixels are shown. While this can be ignored for rotations 0/270°,
with roations 90/180°, 6 pixels are cut-off from the top or left edge.
This change introduces a distinction between object width and controller width,
resulting in pixel-perfect rotations.
2023-04-12 21:19:52 +00:00
unhold
443c3c2a56
Fix graph limits for negative values and other corner cases ( #4253 )
...
Fix lower graph limit for negative values by rounding down instead of truncating.
Consistently handle the corner cases: empty trace, min=max (e.g. single value)
by drawing the grid lines for a single grid division.
2023-04-12 21:18:09 +00:00
X-Ryl669
d75daa9644
Add always trigger stop ( #4249 )
...
* feat: Add manual control config override 1/3
* feat: Add manual control config override 2/3
* feat: Add manual control config override 3/3
* No magical number is better
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
---------
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2023-04-12 21:16:44 +00:00
Joe
7963abb27a
Fix BedJet setup priority [fixes esphome/issues#3807] ( #4677 )
...
There is a race condition where a BedJet unit previously had its BLE
"notify" flag enabled, and it continues to broadcast these notify
packets even after the ESP32 (and BLEClient) goes away, such as during
a crash or unplugging power.
BLEClient::setup_priority=AFTER_BLUETOOTH, while
BedJetHub::setup_priority=AFTER_WIFI. When the ESP32 starts back up
again, BLEClient::setup() happens first and will start receiving the
BLE notify packets almost immediately. Since we register the BLEClient
child from codegen, BedJetHub is registered as a child already by this
point, so BLEClient dispatches the notify status packet (and other gatt
events) to the BedJetHub handler, even though BedJetHub::setup() has
not been called yet.
We initialize BedJetHub::codec_ in setup(), so if BLEClient starts
dispatching gatt events before setup() is called, then codec_ will not
be initialized yet. This causes BedJetHub's gatt notify handler to call
`this->codec_->decode_notify()` on an uninitialized null pointer. Since
invoking a method does not have to dereference the pointer, that method
invocation is allowed; but later trying to access memory on that
instance results in a StoreProhibited panic.
Changing the BedJetHub's setup_priority to BLUETOOTH causes it to be
setup before BLEClient, so that by the time BLEClient starts to receive
BLE packets, BedJetHub is ready to receive them.
2023-04-12 08:33:15 +00:00
Jesse Hills
0b9e8fda34
Fix pin schema for i2s microphone ( #4680 )
2023-04-12 08:25:19 +00:00
Dave Johnston
a3cacc0c8b
Add support for SSD1306 72x40 displays ( #4659 )
...
* add SSD1306 72x40
* fix indents
* fix clang style
2023-04-12 04:02:29 +00:00
Keith Burzinski
5a4840f641
Fix some NFC/PN532 crashes ( #4678 )
...
* Add + use some constants, fix some crashes
* Fix PN532 crashes
2023-04-12 02:29:06 +00:00
Keith Burzinski
3d7d689040
Fix ESP32 SPI hardware assignment in Arduino fw ( #4669 )
2023-04-12 01:38:41 +00:00
Jesse Hills
b60c08dd28
Add push to talk voice assistant ( #4648 )
...
* Add push to talk voice assistant
* Refactor most code into voice_assistant
* Make voice_assistant the component and remove push_to_talk (can be done in yaml)
* Fix component setup
* Always AF_INET to match serverside
* Fix microphone and media player co-existence
* Format
* Update codeowners
* Update test file
* Fix endifs
* nullptr not NULL
* clang-tidy
* Format
* fixup: Add VA event data
* Generate proto
* Parse and log events
* Add default to switch
* Fix
* Add mic/va to test5
2023-04-11 23:45:10 +00:00
Jörg Thalheim
421ebcc8b2
use PRIx macros for printing u32/i32 ints ( #4671 )
...
This fix compilation issues with the latest esp-idf.
2023-04-10 22:20:02 +00:00
Ben Hoff
42401775e1
Added in mmc5603 code ( #4175 )
...
* added in mmc5603 code
* added in codeowner
* fix linter errors
* whitespace linter errors
* added codeowner
* clang format
* remove clang format from python code
* fix whitespace
* add tests
* fix test
* make requested edits
* remove status manipulation
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-04 02:34:14 +00:00
dependabot[bot]
9c9bc58c16
Bump pylint from 2.16.4 to 2.17.2 ( #4650 )
...
* Bump pylint from 2.16.4 to 2.17.2
Bumps [pylint](https://github.com/PyCQA/pylint ) from 2.16.4 to 2.17.2.
- [Release notes](https://github.com/PyCQA/pylint/releases )
- [Commits](https://github.com/PyCQA/pylint/compare/v2.16.4...v2.17.2 )
---
updated-dependencies:
- dependency-name: pylint
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* Add return 0 to run_miniterm
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-03 23:55:00 +00:00
tracestep
fbc129cccc
Version retry (fixes esphome/issues#3823) ( #4651 )
2023-04-03 22:23:31 +00:00
RoboMagus
d78e9e6aa8
Number step not optional ( #4649 )
...
* Number step not optional
* Update __init__.py
* Update __init__.py
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-04-03 19:31:11 +00:00
Mikkel Jeppesen
878155a03d
Log calibration results at level INFO ( #4240 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-31 09:05:28 +00:00
Fabian
9922eb83e2
Support advanced UART customization ( #4465 )
...
* Add methods to get hardware uart details.
* Fix `setRxBufferSize` error.
---------
Co-authored-by: Your Name <you@example.com>
2023-03-31 04:30:24 +00:00
Fabian
79f861f012
Avoid sensor padding. ( #4638 )
...
Co-authored-by: Your Name <you@example.com>
2023-03-31 04:29:17 +00:00
Fabian
4faa9d109e
entity_base avoid padding bytes. ( #4637 )
...
Co-authored-by: Your Name <you@example.com>
2023-03-31 04:28:49 +00:00
kahrendt
28534ecc61
Binary map bugfixes ( #4636 )
...
* limit configuration to 64 binary sensors to match code limitation
* remove superfluous debug logging
* improve state publishing logic eliminating NAN being sent on boot in certain cases
* adjust type for bitmask shift to match mask variable type
2023-03-31 04:27:24 +00:00
felixlungu
616e0a21d8
add bluetooth mac address in dump_config() ( #4628 )
...
* add bluetooth mac address in dump_config()
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
* Update ble.cpp
2023-03-30 01:12:06 +00:00
Jesse Hills
a546ffd490
Add ifdef to new bt proxy unsubscribe ( #4634 )
...
* Add ifdef to new bt proxy unsubscribe
* Also add to subscribe message and wrap api conneciton code
* Format file
2023-03-30 01:08:51 +00:00
Jesse Hills
b5d0aede38
Remove AUTO_LOAD from as3935 ( #4630 )
2023-03-30 01:08:31 +00:00
github-actions[bot]
a014d853a4
Synchronise Device Classes from Home Assistant ( #4633 )
...
* Synchronise Device Classes from Home Assistant
* Remove count do the `DEVICE_CLASSES` list is also updated
* Format file
---------
Co-authored-by: esphomebot <esphome@nabucasa.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-29 02:47:00 +00:00
Fabian
3ac7bf3761
EntityBase: Move ObjectId to Flash ( #4569 )
...
* Move EntityBase Object Id from memory to flash.
* Sprinkler use common `setup_entity` method.
* Remove `EntityBase` from Sprinkler.
* Support for entity names set to None
* change so gh PR picks up commit.
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-28 09:00:34 +00:00
richardhopton
922344811f
feat: Add support to unsubscribe from BLE advertisements ( #4620 )
...
* feat: Add support to unsubscribe from BLE advertisements
* Fix tests & clang
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-28 08:54:58 +00:00
Fabian
cb2fcaa9b1
EntityBase Name can stay in flash. (#4594 )
...
* `EntityBase`can stay in flash.
* Trying to please the CI.
---------
Co-authored-by: Your Name <you@example.com>
2023-03-28 06:38:56 +00:00
Alfredo
1f50bd0649
Fix EzoCommandType enum ( #4593 )
...
* Fix EzoCommandType enum
Assign explicit value to EZO_CALIBRATION, and rescale all subsequent values.
* Remove enum values
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-27 22:08:26 +00:00
Jesse Hills
06f83bf1c0
Fix platform restriction for bme680_bsec ( #4616 )
...
* Fix platform restriction for bme680_bsec
* Fix
* revert spi change
* Add comment back
* Dont crash on rp2040 platform
2023-03-26 22:50:33 +00:00
Jesse Hills
c2756d57d8
Allow entity names to be set to None ( #4607 )
...
* Allow entity names to be set to None so they take on the device friendly_name automatically
* Use empty
2023-03-26 22:49:09 +00:00
Berend Haan
56504692af
Lower range of CONF_FREQUENCY ( #4619 )
2023-03-26 22:48:17 +00:00
Jesse Hills
e542e75b9e
Require step to be set when calling register_number ( #4622 )
2023-03-26 22:44:56 +00:00
tracestep
806e43c34c
SX1509 minimum loop period (fixes esphome/issues#4325) ( #4613 )
...
* Minimum loop period (fixes esphome/issues#4325 )
* clang-tidy suggestions
* More clang-tidy suggestions
2023-03-26 21:59:57 +00:00
J. Nick Koston
9ee661c1e4
Add ability to clear the gatt cache ( #4621 )
...
* Add ability to clear the gatt cache
With BlueZ we can fully clear the cache when something goes wrong with the services, however since this is also a cache on the ESP32 we need to be able to clear the on device cache as well for the proxies since if something goes wrong with the service resolution it can cache the bad resolution on NVS forever.
Our current client implementation is limited to clearing the memory cache in Home Assistant 89355e0879/homeassistant/components/esphome/bluetooth/client.py (L512)https://github.com/esphome/issues/issues/4156
https://github.com/esphome/aioesphomeapi/pull/410
* naming
* lint
* lint
* naming
* naming
* naming
* 88 now that 87 is taken
* make const
* Update esphome/components/api/api_frame_helper.cpp
2023-03-26 21:48:56 +00:00
Regev Brody
36c0e2416d
add select_schema to select component ( #4545 )
...
* add select_schema to select component
* add select_schema to select component
* fix cr
2023-03-26 20:01:35 +00:00
RoboMagus
e4ba3ff1db
Limit range on filter time period for remote_receiver ( #4604 )
...
* Limit range on filter time period for remote_receiver
* pylint
2023-03-23 18:41:14 +00:00
Dominik Skalník
c16709ed95
fix wrong port multiplexer name in dump GPIO function ( #4592 )
2023-03-23 18:37:40 +00:00
guillempages
e13eaf6706
Fix animation resizing ( #4608 )
...
Animation resizing in RGB24 format is causing an error "Image cannot be resized to a bigger size". Other image types do not show the issue, and the only difference is the "image.thumbnail" call.
Removed the call and tested; the animation is shown with the desired size.
2023-03-22 08:05:09 +00:00
Jesse Hills
a1eb3b8475
Swap curly brackets for round on LockGuard ( #4610 )
2023-03-22 07:56:02 +00:00
Jesse Hills
d52e425ba2
Remove EntityBase from sprinkler ( #4606 )
...
* Remove EntityBase form sprinkler
* remove unneeded method
* Set name correctly
Move some timers to `setup` that rely on this->name_
* Fix SprinklerControllerSwitch setup
* Update esphome/components/sprinkler/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2023-03-22 07:35:16 +00:00
Jesse Hills
d70e7da0ef
rp2040: Use fake Mutex lock ( #4602 )
2023-03-21 20:25:19 +00:00
Jesse Hills
d42f35de5d
Wrap ipv6 code a bit more ( #4574 )
...
* Wrap ipv6 code a bit more for when ipv6 support should not be compiled in
* More checks
* More uses
* Fix
2023-03-21 20:24:14 +00:00
jerome992
cd57469e06
Fix negative sqrt root in ct_clamp_sensor.cpp ( #2701 ) ( #4236 )
...
Co-authored-by: Jerome <jerome992@internet.lu>
2023-03-20 04:22:22 +00:00
Aaron S. Jackson
d98d6ff45f
B/W support for GooDisplay GDEY029T94 (as used on Adafruit MagTag) ( #4222 )
...
* B/W support for GooDisplay GDEY029T94
* Fix python style ci
* linter recommendations
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-20 03:45:50 +00:00
Oxan van Leeuwen
14e38f0469
Upgrade clang-format to v13 ( #4535 )
...
* Upgrade clang-format to v13
* Apply clang-format-13 formatting changes
* Format
* Format bme_680
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-20 03:38:41 +00:00
Jesse Hills
f0f6d3f1cd
Disallow uart0/1/2 as ids in config ( #4446 )
...
* Disallow uart0/1/2 as ids in config
* Update test files
2023-03-20 02:29:21 +00:00
Michael Bisbjerg
b2cec10601
Fix outdated filter string in platformio_api ( #4587 )
2023-03-19 19:11:18 +00:00
Sybren A. Stüvel
48658d5a55
Add a simple 'skip_initial' filter ( #4582 )
...
* Add a simple 'skip' filter
This filter simply skips the first `send_first_at` values, then passes
everything as-is. This is quite useful when you know the first few sensor
readings should be ignored.
Example YAML:
```yaml
sensor:
- platform: sgp30
id: mysensor_sgp30
eco2:
id: mysensor_sgp30_co2
name: "eCO₂"
accuracy_decimals: 0
filters:
- skip:
send_first_at: 41
```
* Rename the filter to `skip_initial` and simplify the schema
New usage:
```yaml
filters:
- skip_initial: 41
```
* Apply clang-format
2023-03-19 19:08:51 +00:00
Peter Halicky
5207ca1d52
Add support for ESP32 CAM resolutions for 3MP and 5MP sensors (OV5640 for example). Also support (almost) arbitrary camera clock, some cameras/ESP chips need slightly lower clock than 20MHz to avoid image corruption. ( #4580 )
2023-03-19 19:03:38 +00:00
Fabian
7196fb8e82
add define __str__ method ( #4576 )
...
Co-authored-by: Your Name <you@example.com>
2023-03-19 18:55:12 +00:00
Nathaniel Wesley Filardo
0de5808ed2
climate: brown paper bag fix for on_configure ( #4573 )
...
I forgot this hunk in https://github.com/esphome/esphome/pull/4511 .
I'm sorry for the noise.
2023-03-19 18:54:00 +00:00
Kai Gerken
ebc544e4b4
Fix compile error on pzemdc.h ( #4583 )
2023-03-19 18:31:05 +00:00
Raph
a31fb3c987
Add option flip_x ( #4555 )
...
* Adding flip_x
* Adding flip_x
* Adding flip_x
* Adding flip_x
* Adding flip_x
* convert tab to space
* update format
2023-03-15 22:23:01 +00:00
Samuel Sieb
dfc7cd7f5d
allow using a binary output for the status led ( #4532 )
...
* allow using a binary output for the status led
* lint
* output status as well
* simplify
---------
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-03-15 22:21:35 +00:00
Witold Krecicki
a8bb2a42a1
Add an option to force SPI into software mode, useful when ( #4556 )
...
reusing pins for different purposes.
2023-03-15 22:21:25 +00:00
R Huish
3d4c0e6667
Added missing PM_1_0 and PM_10_0 for PMS5003T and PMS5003ST ( #4560 )
...
* Added missing PM_1_0 and PM_10_0 for PMS5003T
Added missing PM_1_0 and PM_10_0 for PMS5003T
* Revert "Added missing PM_1_0 and PM_10_0 for PMS5003T"
This reverts commit 86084f7c61
2023-03-15 22:21:10 +00:00
Trent Houliston
25fb288016
Update the delta filter to take a percentage value as well as an absolute value ( #4391 )
2023-03-15 22:20:18 +00:00
Fabian
1b8b8cdd11
EntityBase: Icon string can stay in flash. ( #4566 )
...
* Icon string can stay in flash.
* Remove redundant const.
---------
Co-authored-by: Your Name <you@example.com>
2023-03-15 22:20:12 +00:00
NP v/d Spek
2f50e18eb5
fixing shrink and extend functions of the displaybuffer's Rect class ( #4565 )
...
* fixing rectangle's `shrink` and `extend`
* fixed the rect::shrink and rect::inside methods
and added rect:equal() method
* fixed internal clang issue again. When would is
this going to be fixed :(
* fixed internal clang issue again. When would is
this going to be fixed :(
* remove trailing space
2023-03-15 19:45:50 +00:00
Jesse Hills
215107e8ea
Mark esp32_touch supported only on standard esp32 variant ( #4562 )
...
* Mark esp32_touch supported only on standard esp32 variant
* Add back default
2023-03-15 07:42:33 +00:00
Keith Burzinski
d3f2b93c42
Remove switch actions during config; bump setup priority ( #4563 )
2023-03-15 05:21:23 +00:00
Stroe Andrei Catalin
ee7102fcd1
Added response for Tuya RSSI command ( #4549 )
...
* Added wifi rssi util
Added tuya mcu response to wifi rssi command
* Cleanup
* PR Comments
* PR Comments
2023-03-14 00:54:35 +00:00
DAVe3283
a44e38300b
Revert "Remove state class from uptime sensor ( #4345 )" ( #4557 )
...
This reverts commit 36c2e770bfesphome/issues#4193 .
2023-03-14 00:52:19 +00:00
Eduardo Roldan
b00e20c29f
pipsolar component. Correct the sscanf format for QPIG command parsing to set pv_input_voltage as float (not int) ( #4165 )
2023-03-13 22:46:46 +00:00
Jesse Hills
d642aeba0f
Map gpio pins for touch on esp32-s2/s3 ( #4552 )
...
* Map gpio pins for touch on esp32-s2/s3
* fix value
2023-03-13 00:13:36 +00:00
NP v/d Spek
6a6aee510d
On the ILI9xxx display's enable the psram on esp32 and allow big screen ( #4551 )
...
* enable the psram on esp32 and allow big screen
* update CODEOWNERS
* small update
* update CODEOWNERS again.
* Removed the M5STACK because it is a ESP32 device.
* i removed the wrong model
* update the error message.
2023-03-13 00:13:19 +00:00
Jesse Hills
ea17a92dbc
Allow AUTO_LOAD to be a function ( #4550 )
2023-03-12 22:43:31 +00:00
Dorian Zedler
32a0a60480
Feat: add support for hex color in color component ( #4493 )
...
* Feat: add support for hex color in color component
* Chore: move hex color validator to color component
* Chore: add test
* Chore: fix formatting
* Chore: make linter happy
* Chore: make linter happy
* Fix: parse correct offsets
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Chore: use cv.Invalid
* Fix: remove # because it indicates a comment in yaml
* Fix: only allow hex if no other color value is set
* Fix: tests
* Fix: mutual exclusion of raw and hex colors
* Chore: format file
* Update __init__.py
---------
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-12 20:26:27 +00:00
Martin Murray
5a56644702
Add carbon dioxide device class to scd30 sensor schema. ( #4547 )
2023-03-12 20:16:48 +00:00
jakehdk
29113808ee
Add support for new clones of mpu6050 responding with 0x70 address ( #4546 )
...
Co-authored-by: jakehdk <Jake@Jakobs-MacBook-Pro.local>
2023-03-12 20:14:00 +00:00
Carlos Garcia Saura
01687a9d57
Correct BME680 gas calculation and heater_off ( #4498 )
...
* Fix missing data array
* Fix incorrect bit offset
* Correct variable types
* Do same conversions as in original library
* Correct clang-format
* Move out float conversion for clarity
* Added check for heater stability
* Correct clang format
* Allow reporting gas resistance when heater is disabled
* Correct clang format
* Better error reporting by @DAVe3283
* Correct signed operation, range switching error was positive all the time
2023-03-09 00:34:06 +00:00
Oxan van Leeuwen
801fbf44c5
Revert storing Font glyphs in manually-allocated memory ( #4516 )
...
This partially reverts commit 62459a8ae1
2023-03-09 00:14:34 +00:00
Oxan van Leeuwen
ba1416cc0e
Drop deprecated entity property base methods ( #4539 )
2023-03-09 00:08:45 +00:00
Oxan van Leeuwen
afc1c83af4
Mark unique_id() override as deprecated ( #4538 )
2023-03-09 00:06:20 +00:00
Oxan van Leeuwen
da056866ff
Drop broken logging macros ( #4534 )
2023-03-09 00:03:33 +00:00
NP v/d Spek
336c2d34e6
Renaming and extending the ili9341 to the ili9xxx component ( #4275 )
...
* - Removed cleaning the screen twice.
\Should be handled by `DisplayBuffer::init_internal_();`
- Made ili9341::initalize() protected and renamed
\ it to ili9341::initalize().
- ili9341::initalize() should only init the display
\ and set the width and heigth.
* removed to much
* clang format fixes
* removing trailing underscors for
protected virtual methods
* removed the "override" on display()
* clang fixes
* restored old changes
* Renamed the ili9341 platform to ili9xxx and added
multiple drivers as well. including PR #3848
* fixed most of the clang reported issues
* fixed reported issues
* last fixes
* Setting the right codeowners
* missing changes
* fixed naming Display() method.
* clang again
* clang fix
* fixes reported by @jesserockz & @gpambrozio
* a change to display.py removing an unneeded var
* re-introduce **backlight** option.
* update the ili9488 initialization
* update the ili9488 initialization and fix typo
* fixed typo
* add missing constants
* swap height and width back for the ili9488
* init fixes ili9488
* fixed lint issue
testing the init code
* oeps
* init fixes ili9488
* fixed wrong define
* fixed wrong define again
* removed some spaces
* revert to ili9341
* Remove parts that where used for
the switchplate
* lint fixes and removing unused function
* fix error and introducing 16bit color option
* fix error and introducing 16bit color option
* fix clang issue
* clang fix
* clang issue again
* is this what clang exprect
* clang fix
* clang fix
* try again
* let try again
* and again
* and the last clang fix
* remove the need of wifi
* update dimentions
* update ili8488 init code.
* update dimentions
* allow to change height and width
* dump color mode config
* fix
* fix
* modify logging
* referd back unrelated change
* code formatting commit and moving functions around
* add missing ;
* update code
* update code
* use the correct write_array for sending uint16_t
* fix panic loop
* fix panic loop
* - update the test file
- fixed sending display data
* clang fixes
* clang fixes
* clang fixes again
* remove .gitignore items
* remove .gitignore items
* make sure Update() can can not be called while
called
* clang correction
* adding a test yaml for the ili9341
* Update ili9341 example
* Make test ili9xxx/tests only local
* restore back old ili9341 driver code
* Add a new config for the M5Core
* fix clang request
* reverd to restore of the old ili9341
there is no proper way to say it is depricated.
* Remove the backlight/led pin from the config.
You need to use a proper light platform component
* Ili9488init changes (#88 )
Fixed ILI9488 init settings, and adjusted pixel handling code to push pixels in 18 bit format.
This does not change the internal 16-bit representation.
* fixed some leftover clang issues from the merge.
* fixed the slang-tidy request.
* remove `backlight_pin` warning.
---------
Co-authored-by: JD Steffen <jdsteffen81@gmail.com>
2023-03-08 23:03:49 +00:00
Russell Cloran
f3a969d35c
Add ESP32-S3 support in NeoPixelBus component ( #4114 )
...
* Add ESP32-S3 support in NeoPixelBus component
* Update NeoPixelBus version in platformio.ini
2023-03-08 22:35:40 +00:00
Jared Sanson
c12dd77c64
Fix ethernet clk_mode for GPIO0_OUT ( #4307 )
...
* Fix GPIO0_OUT definition for ethernet component
* Formatting
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-08 21:03:11 +00:00
Jesse Hills
4f138c600b
Bump version to 2023.4.0-dev
2023-03-09 09:09:39 +13:00
Kai Gerken
1087cb55b4
Added pzemdc reset energy action ( #4481 )
...
* remove unused sensors on pzemdc
* add reset energy action for pzemdc
* fix lint errors
* remove trailing space on pzemdc.h
* make method reset_energy of pzemdc public
* Apply suggestions from code review
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-08 19:00:44 +00:00
J. Nick Koston
600f4be2c4
Bump esp-idf to 4.4.4 ( #4528 )
...
There are some nice BLE fixes and this uses about ~5000-8000 bytes
less RAM
https://github.com/espressif/esp-idf/releases/tag/v4.4.4
2023-03-08 18:25:25 +00:00
Fabian
5e6665494d
Use PSRam for BLE scan results. ( #4486 )
...
* Use PSRam for BLE scan results.
* Format Document
* Use generic define `CONFIG_SPIRAM`.
* Formatting changes.
* Memory allocation is allowed to fail.
* Use mark_failed instead of abort.
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-08 18:23:02 +00:00
Jesse Hills
2ef25f3153
Fix ethernet driver setting gpio 5 high when no power pin defined ( #4531 )
2023-03-08 07:12:07 +00:00
Morgan Robertson
bc28ea1fde
Add AS7341 spectral color sensor ( #4331 )
...
* Add support for AS7341 spectral color sensor.
* Run clang-format and clang-tidy.
* Post-review changes.
* Apply suggestions from code review
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-08 01:15:49 +00:00
Jesse Hills
623e31ddee
sn74hc165 fixes ( #4457 )
...
* Add delay between clock changes on sn74hc165
* Increase to 10us
* Add another delay after clock low
* Print input bits every second
* Fix pin order
* Remove log
* Fix for inverted pins
* formatting
2023-03-08 01:11:12 +00:00
Oxan van Leeuwen
ceebe14628
Add ability to await safe mode in codegen ( #4529 )
...
* Add ability to await OTA safe mode
* Make pylint happy
2023-03-07 21:29:45 +00:00
DAVe3283
b29cc58144
Add absolute humidity component ( #4519 )
...
* Import Absolute Humidity component
https://PigLab.ReaperLegion.net/home-automation/hass/esphome/custom-components/absolute-humidity
* Fix terminology, add some docstrings
* Switch from double to float
https://github.com/esphome/esphome/pull/4519#pullrequestreview-1327615169
The additional precision doesn't matter in practice.
* Address code review suggestions
* Lint code
2023-03-07 20:47:25 +00:00
bisbastuner
356efdb92c
Add support for multiple devices in bme680_bsec ( #3550 )
...
* Add initial support for multiple devices
Re-introduce support for multiple I2C devices (it was suppressed in df37a7635febf13a0bebf13a0ba0ebf13a0bebf13a0ba0
2023-03-07 07:15:40 +00:00
kahrendt
6ecf4ecac6
FS3000 sensor ( #4502 )
...
* Add support for FS3000 sensor.
* add fs3000 to test yaml
* Clean up code with clang.
* Clean up sensor.py file.
* Update CODEOWNERS file.
* Apply suggestions from code review regarding sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Apply suggestions from code review for basic issues regarding C++ code
- removed unnecessary default for FS3000Model
- use "this->" before any sensor update
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Move model setup to overall setup function.
* Remove unneeded CONF_ID from sensor.py
* Run clang-format
* Move set_model code to header file now that it is simplified
* Update fs3000.h
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-07 04:25:14 +00:00
Nathaniel Wesley Filardo
05ab49a615
climate: add on_control callbacks ( #4511 )
...
This lets downstream components respond to climate configuration
changes, which take place through ClimateCall objects, without also
being notified every time the state changes, which happens every time
the input sensor announces a new value.
FIXES https://github.com/esphome/feature-requests/issues/2136
2023-03-07 04:19:49 +00:00
Fabian
3773c385c7
Ensure component is ready before update. ( #4523 )
...
Co-authored-by: Your Name <you@example.com>
2023-03-07 04:16:42 +00:00
Fredrik Gustafsson
29571a1acd
implement pairing for bluetooth proxy ( #4475 )
...
* default to just-works encryption
This patch will turn on encryption when making active connections in order to comply with just-works BLE encryption.
* Revert "default to just-works encryption"
This reverts commit 05bc9e9f1c
2023-03-06 18:04:35 +00:00
Oxan van Leeuwen
b8538c2c12
Fix typo ( #4515 )
2023-03-05 23:02:36 +00:00
tljuniper
7466773ac8
substitutions: Don't warn when passwords look like a substitution ( #4161 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-05 20:28:46 +00:00
Jesse Hills
b8ca40170e
Remove idf components before checking if any in config ( #4506 )
...
* Remove idf components before checking if any in config
* Fix bug with no refresh time specified
2023-03-05 20:17:32 +00:00
Aliasghar Dashkhaneh
bd86a0ac3b
Update __init__.py ( #4514 )
...
In some Sony remote codes, the **data** is more than 16 bits.
2023-03-05 18:45:54 +00:00
Jesse Hills
df3f13ded8
Add int16 to codegen ( #4507 )
2023-03-04 07:19:51 +00:00
GitforZhangXL
86407b9f6f
Change variable "skip_updates" and "skip_updates_counter" type from "uint8_t" to "uint16_t" ( #4487 )
...
* change 'skip_updates'from 'uint8' to 'uint16_t'
* Delete modbus_controller_fix.md
* Update modbus_controller.h
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-26 22:35:00 +00:00
Oxan van Leeuwen
43fb68f8a0
Fix parallel invocations of repeat action ( #4480 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-26 22:23:04 +00:00
Fabian
62459a8ae1
Move Font glyphs to SPI RAM. ( #4485 )
...
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-26 18:45:30 +00:00
Oxan van Leeuwen
86c0e6114f
Lock scheduler items while modifying them ( #4410 )
...
* Cosmetic fixes to scheduler code
* Add generic Mutex API
* Lock scheduler items while modifying them
* Always defer MQTT callbacks on Arduino
2023-02-26 18:43:08 +00:00
Fabian
1a9141877d
use same heap_caps_malloc parameter as ps_malloc. ( #4484 )
...
Co-authored-by: Your Name <you@example.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-26 18:42:29 +00:00
Jesse Hills
6ec18fc630
Update esp32 esp-idf dev and latest version numbers ( #4479 )
2023-02-26 18:25:22 +00:00
Andreas Hergert
4d674392e8
Add energy to pzemdc ( #3626 )
...
* added energy to pzemdc
* fixed calculation
* added test
* moved tests
---------
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
2023-02-23 17:38:34 +00:00
J. Nick Koston
6704b2cedf
Bump esp-idf to 4.4.3 via platformio/espressif32 @ 5.3.0 ( #4254 )
...
* Bump esp-idf to 3.4.3 via platformio/espressif32 @ 5.3.0
The new version appears to improve the stability of
BLE + WiFi
* bump recommended version as well
2023-02-23 02:08:06 +00:00
Yaroslav Heriatovych
fe4fb5f1ac
Add Haier climate component ( #4001 )
...
* Basic functionality works
* Cleanup
* Add tests
* Separate header
* Fix send_data_
* Formatting fix
* Add __init__.py
* Fix type
* Add codeowners
* Rename supported_swing_modes
* Use multiple swing modes, same as midea platform
* Add CLIMATE_FAN_QUIET handler
* PR fixes
2023-02-23 02:05:33 +00:00
Samuel Sieb
350d4e5071
add kuntze component ( #4411 )
...
* add kuntze component
* fixes
* more lint
---------
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-02-23 01:31:35 +00:00
Jesse Hills
23f47d0ad2
Initial stab at importing idf components ( #4000 )
...
* Initial stab at importing idf components
* Handle repo with multiple components
Allow components directly from yaml
* Actually use the refresh config var
* Update esphome/components/esp32/__init__.py
2023-02-23 01:22:39 +00:00
Jesse Hills
f98d93efa8
Fix multiple remote_receivers with triggers ( #4477 )
2023-02-23 00:38:45 +00:00
Shreyas Karnik
91e037346b
add person sensor (SEN21231) from usefulsensors ( #4454 )
...
* add person sensor (SEN21231) from usefulsensors
* add person sensor (SEN21231) from usefulsensors
* change file mode
* fix tests
* fix tests
* rollback un-intended changes
* Update esphome/components/sen21231/sen21231.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.h
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* remove unused import
* Update esphome/components/sen21231/sen21231.h
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sensor.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.h
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/sen21231/sen21231.h
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* remove unused import
* Update sen21231.h
* lint changes
* linting
* linting
* Update sen21231.h
* Update sen21231.cpp linting
* linting fixes
* fix codeowners
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-23 00:37:23 +00:00
Samuel Sieb
8e1430243e
fix parity ( #4476 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-02-22 23:40:20 +00:00
Keith Burzinski
98b3d294aa
Sprinkler "v2" updates ( #4159 )
...
* Add standby switch
* Add support for arbitrary run duration in start_single_valve action
* Add divider feature
* Allow zero multiplier
* Fixes for #3740 , misc. cleanup and polishing
* Integrate number components for multiplier, repeat and run duration
* Add various methods to get time remaining
* Add next_prev_ignore_disabled flag
* Optimize next/previous valve selection methods
* Add numbers_use_minutes flag
* Initialize switch states as they are set up
* Ensure SprinklerControllerSwitch has state if it's not restored
* Add repeat validation
* Misc. clean-up and tweaking
* Fix bugprone-integer-division
* More clean-up
* Set entity_category for standby_switch
* Set default entity_category for numbers
* More housekeeping
* Add run request tracking
* Fix time remaining calculation
* Use native unit_of_measurement for run duration numbers
* Unstack some ifs
2023-02-22 01:47:50 +00:00
Mikhail Zakharov
38a01988a5
fix library override logic ( #4474 )
...
* fix library override logic
* formatting
2023-02-21 21:52:06 +00:00
Fabian
d16eff5039
Support Mopeka Standard LPG tank bluetooth sensor ( #4351 )
...
* Add mopeka standard tank sensor.
* Enhance mopeka ble to find standard sensors.
* Updated `CODEOWNERS` file
* Move default from cpp to py.
* Format documents with esphome settings.
* Linter wants changes.
* Update name of `get_lpg_speed_of_sound`.
* manually update `CODEOWNERS`.
* Manually update CODEOWNER, because `build_codeowners.py. is failing.
* Add comments.
* Use percentage for `propane_butane_mix`.
* add config to `dump_config()`
* Formatting
* Use struct for data parsing and find best data.
* Add `this`.
* Consistant naming of configuration.
* Fix format issues.
* Make clang-tidy happy.
* Adjust loop variable.
---------
Co-authored-by: Your Name <you@example.com>
2023-02-21 21:48:29 +00:00
Michael Muré
ba6f89a757
toshiba: add support for quiet fan mode ( #4283 )
2023-02-20 22:31:25 +00:00
Jesse Hills
0e1d018ce3
Allow specifying target and current visual steps for climate ( #4440 )
...
* Allow specifying target and current visual steps for climate
* Fixes
* format
* format
2023-02-20 22:22:43 +00:00
Jesse Hills
50fbbf2d3b
Move remaining SENSOR_SCHEMA to use sensor_schema() ( #4471 )
2023-02-20 03:22:37 +00:00
konsulten
247916fe89
BL0939 state_class set for energy sensors ( #4463 )
...
BL0939 was missing TOTAL_INCREASING for energy (kWh) thus it did not show as statistics in home assistant
2023-02-20 02:48:59 +00:00
Mat931
ed801f7a27
Add internal_temperature component ( #4330 )
...
* Add cpu_temperature component
* Add tests
* Fix formatting
* Possible fix for "sensor not shown in HomeAssistant"
* Rename component to internal_temperature
* Update esphome/components/internal_temperature/internal_temperature.cpp
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Update esphome/components/internal_temperature/internal_temperature.cpp
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Update esphome/components/internal_temperature/internal_temperature.cpp
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
* Update internal_temperature.h
* Remove unique_id
* Update ESP32 variant detection
---------
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2023-02-20 02:47:37 +00:00
irtimaled
f68d577986
Add configurable color datapoint ( #4383 )
...
* Add configurable color datapoint
* Lint fixes
* Review comments
* Linting
2023-02-19 21:50:46 +00:00
Jesse Hills
5c49730cb9
Simplify binary_sensor_schema function ( #4469 )
2023-02-19 21:13:40 +00:00
Jesse Hills
04c12823b5
Simplify button_schema function ( #4468 )
2023-02-19 21:13:37 +00:00
Jesse Hills
add40c7652
Simplify number_schema function ( #4467 )
2023-02-19 21:13:35 +00:00
Regev Brody
72391389a3
add SUB_BUTTON macro and ability to button schema to define the class ( #4450 )
...
* add ability to button schema to define the class
* add SUB_BUTTON macro
2023-02-19 19:54:03 +00:00
Regev Brody
e68beb8a43
add SUB_NUMBER macro and schema to number ( #4449 )
...
* add SUB_NUMBER macro and schema
* add SUB_NUMBER macro and schema
* add SUB_NUMBER macro and schema
2023-02-19 19:54:00 +00:00
Paulus Schoutsen
40e2832e67
Simplify sensor schema generation ( #4462 )
...
* Simplify sensor schema generation
* Mark class not optional
* Fix assignment
2023-02-19 19:20:13 +00:00
Regev Brody
12bef16d54
add SUB_TEXT_SENSOR macro ( #4448 )
2023-02-19 19:11:24 +00:00
Regev Brody
77db8c8401
add SUB_BINARY_SENSOR macro ( #4447 )
2023-02-19 19:11:21 +00:00
Adam Jacques
66eecd3675
NeoPixel - Add support for ESP32-S3 ( #4435 )
2023-02-19 13:38:27 +00:00
jmichiel
c03b1fae68
fix preset discovery config ( #4451 )
...
Co-authored-by: Michiel, Jeroen <jeroen.michiel@teledyneflir.com>
2023-02-19 13:33:52 +00:00
Jesse Hills
37d55b55fc
Fix adoption of variants and pico-w ( #4455 )
2023-02-17 06:06:18 +00:00
Oxan van Leeuwen
9aed758d1b
Automate syncing device classes with HA ( #4438 )
...
* Sync device classes with HA
* Rename blacklist
2023-02-16 00:28:12 +00:00
Jesse Hills
dbe5587806
Add ESPHome version to generated platformio.ini ( #4443 )
...
* Add ESPHome version to generated platformio.ini
* Move description to platformio section
2023-02-16 00:27:32 +00:00
Oxan van Leeuwen
5307dfee21
Initialize all fields in ESPTime in PCF85063 ( #4439 )
2023-02-14 22:45:27 +00:00
Dominik Wagenknecht
8b5b9e508b
Deep Sleep capable ports for ESP32S3 ( #4230 )
...
Update to provide RTC capable ports for ESP32S3.
Fresh from [espressif gpio docs](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/peripherals/gpio.html )
2023-02-14 21:09:07 +00:00
Sergey Dudanov
a0d04ba091
Fix setting wrong traits on midea climate component ( #4425 )
...
* Fix issue3914
* Remove also default presets and modes
* Fix traits after autoconf
2023-02-14 00:34:50 +00:00
dependabot[bot]
5997401e9e
Bump pylint from 2.15.10 to 2.16.2 ( #4426 )
...
* Bump pylint from 2.15.10 to 2.16.2
Bumps [pylint](https://github.com/PyCQA/pylint ) from 2.15.10 to 2.16.2.
- [Release notes](https://github.com/PyCQA/pylint/releases )
- [Commits](https://github.com/PyCQA/pylint/compare/v2.15.10...v2.16.2 )
---
updated-dependencies:
- dependency-name: pylint
dependency-type: direct:production
update-type: version-update:semver-minor
...
Signed-off-by: dependabot[bot] <support@github.com>
* Lint
---------
Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-13 22:55:36 +00:00
Jesse Hills
4f4ca61ada
Handle uart.write in json-config endpoint ( #4430 )
2023-02-14 11:38:21 +13:00
Jesse Hills
dfeeccfcca
Add version api endpoint ( #4429 )
2023-02-14 11:38:05 +13:00
WitchKing
3a101e8ec5
Ledc fix ( #4338 )
2023-02-13 15:53:40 +13:00
Expaso
7a2d7fdd19
Fixed PlatformIO Build on DEV ( #4422 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-13 15:43:52 +13:00
Andre Borie
78f5c417a4
Gracefully reject vacuum map upload requests ( #4414 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-13 14:43:11 +13:00
Andre Borie
b8c0f88440
Improve tuya network status command ( #4415 )
2023-02-13 14:14:35 +13:00
NP v/d Spek
58eeb6b1b8
Fix check for empty clipping array ( #4421 )
2023-02-12 17:03:53 +01:00
NP v/d Spek
f8acc45be4
Add Clipping to displaybuffer ( #4271 )
...
* adding Clipping support to the displaybuffer
- add rect structure
* removed unused define
* add missing property for storing the clipped areas
* include log header
* Move Rect method's code to cpp file
- removed obsolete remarks
* fixed reported issues
* make Rect class methods public
* clang fix
* Remove commented code
* Renaming clipping methods
* Multiple changes:
- replaced 32766 with VALUE_NO_SET
- fixed the way *_clipping(left, top, right, bottom) is stored
- add `is_clipping();`
- make sure that all clipped region are closed after `do_update_()`
- rename de parameters for `Rect::expand();`
* remove unneeded space
* replace define with static const uint8_t
* correcting my copy paste mistake
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-11 09:56:15 +13:00
dependabot[bot]
b7ab00b699
Bump black from 22.12.0 to 23.1.0 ( #4375 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-10 07:40:04 +13:00
Patrick Collins
045489e6d7
Climate PID Autotune Logging fixes ( #4136 )
...
* pid autotune logging fixes
* fixed clang-format request
* improved and clarified logging
* changed logging not to alter the TAG
* logging now does not alter TAG. fixed clang formattting
* fixed string issues
* playing with strings to please the clang gods
* playing with strings
* Delete secrets.yaml
* Delete console-fan-autotune-test.yaml
* Update esphome/components/pid/pid_autotuner.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/pid/pid_autotuner.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/pid/pid_autotuner.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/pid/pid_autotuner.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/pid/pid_autotuner.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
---------
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-09 22:37:31 +13:00
Oxan van Leeuwen
499cb615f1
socket: Format IPv4-mapped IPv6 addresses as regular IPv4 address ( #4382 )
2023-02-09 18:17:45 +13:00
Jesse Hills
881cd535b9
Bump version to 2023.3.0-dev
2023-02-09 15:33:02 +13:00
Paulus Schoutsen
17ea0efb08
Verify rel_path output is relative ( #4247 )
2023-02-08 20:20:30 -05:00
Paulus Schoutsen
2fbd33267e
Convert secrets constant to a tuple ( #4245 )
2023-02-09 14:00:58 +13:00
Paulus Schoutsen
d20d4947ac
Remove unused manifest handler ( #4169 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-09 13:41:59 +13:00
Eric van Blokland
7810ad40d7
Added CanalSat and CanalSatLD protocol support ( #3513 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-09 13:22:05 +13:00
jmichiel
7e1e799b3a
add MQTT preset support for Climate components ( #4379 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Michiel, Jeroen <jeroen.michiel@teledyneflir.com>
2023-02-09 12:46:01 +13:00
Michael Muré
dfafc41ce6
climate: add support for quiet fan mode ( #3609 )
2023-02-09 11:28:16 +13:00
Bob Perciaccante
e460792c43
Add support for Lippert LP sensors in mopeka_pro_check component ( #4118 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/feature-requests/issues/1988
2023-02-09 11:07:41 +13:00
Jesse Hills
a9dc491a54
Dont keep logging on improv start ( #4401 )
2023-02-09 10:25:57 +13:00
Jesse Hills
ac6693f177
mDNS updates ( #4399 )
2023-02-09 10:25:44 +13:00
Jesse Hills
c6742117d3
Update log for mics4514 to state 3 minute start time. ( #4396 )
2023-02-09 07:30:19 +13:00
Jesse Hills
b5c47b9669
Update ld2410 logging ( #4395 )
2023-02-09 07:30:00 +13:00
Quentin Smith
40df3aa55e
Merge components in packages ( #3555 )
...
Co-authored-by: Paul Monigatti <pm@paul.pm>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-07 14:08:40 +13:00
tomaszduda23
393ca64d70
adds gpio INPUT_OUTPUT_OPEN_DRAIN ( #4360 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-07 12:55:35 +13:00
Michał Obrembski
d3627f0972
Added Ethernet Component for ESP IDF with JL1101 PHY driver ( #4009 )
...
Co-authored-by: Michał Obrembski <michal@obrembski.com>
2023-02-07 12:54:59 +13:00
Trevor North
124ab31f22
Fix shelly dimmer current sensor device class ( #4385 )
...
fixes https://github.com/esphome/issues/issues/4086
2023-02-07 12:46:06 +13:00
Jesse Hills
1b66fa5004
Remove unneeded validation for esp32 gpio pins ( #4394 )
2023-02-07 12:43:30 +13:00
alexd321
9494c27ad8
modify SGP4X integration to report device_class as air quality index ( #4327 )
2023-02-07 12:35:09 +13:00
Jesse Hills
3facfa5c21
Allow dashboard import to specify if api encryption key should be generated ( #4393 )
2023-02-07 12:27:07 +13:00
Samuel Sieb
93ddce2e79
add Resol VBus support ( #3976 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/feature-requests/issues/1949
2023-02-07 12:17:17 +13:00
sebcaps
0bf6e21e1a
Add Ld2410 Support ( #3919 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-07 11:47:50 +13:00
Florian Trück
6b7b076875
SCD30 Added support for manual calibration ( #4362 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-03 21:13:27 +13:00
Florian idB
8d6ffb9169
Update sim800l.cpp ( #4223 )
2023-02-03 07:53:46 +13:00
Jesse Hills
e95d6041d8
Allow final validate of uart stop bits and parity ( #4376 )
2023-02-02 19:34:25 +13:00
Joakim Plate
0554b06b7e
Allow mdns services to be exposed by config ( #4202 )
2023-02-02 17:18:58 +13:00
Carlos Garcia Saura
e3d9c44bdc
Fix pressure compensation in SCD4X ( #4357 )
2023-02-02 13:22:23 +13:00
Jesse Hills
e847766514
Dump full parsed config to json-config api call ( #4373 )
2023-02-01 16:59:51 +13:00
Jesse Hills
d4a8df04b8
Bump version to 2023.2.0-dev
2023-02-01 15:57:45 +13:00
Mat931
034b47c23a
Fix "BLE server / advertising always on" ( #4353 )
2023-01-27 08:09:22 +13:00
WitchKing
aca56fcdcc
Added support for ADS1015 ( #4281 )
...
Co-authored-by: vilrexa-at-412611259294 <pdzBdl8EkgUikpOWsRCKzTVHMEX2wLnZJRdLhK38oNk=>
2023-01-26 17:20:45 +13:00
melyux
e778a445d9
Add a soft reset in setup() for bmp280 ( #4329 )
...
fixes https://github.com/esphome/issues/issues/3383
2023-01-26 12:11:10 +13:00
Alex
ded86493c2
Fix BME280 initialization before wifi setup ( #4190 )
...
fixes https://github.com/esphome/issues/issues/3530
2023-01-26 12:09:38 +13:00
Stephan Martin
4d72eb42a5
rename esp32 CAN to TWAI, so it compiles again ( #4334 )
...
fixes https://github.com/esphome/issues/issues/4023
2023-01-26 12:08:55 +13:00
Denis Bodor (aka Lefinnois)
267f0587c6
fix stepper jump back with small steps ( #4339 )
2023-01-26 12:06:46 +13:00
Jesse Hills
4a374a466a
Fix in ble client base address parsing ( #4347 )
2023-01-26 12:02:53 +13:00
Jesse Hills
d94e9d92ca
Fix esp32_ble_tracker setup priority ( #4346 )
2023-01-26 07:56:36 +13:00
Jesse Hills
36c2e770bf
Remove state class from uptime sensor ( #4345 )
2023-01-25 15:58:47 +13:00
Jesse Hills
79040c116d
Add next_url to improv serial component config ( #4343 )
2023-01-25 14:37:01 +13:00
Jesse Hills
4aac76c549
Refactor esp32_ble_tracker to use esp32_ble core ble setup code ( #4173 )
2023-01-25 14:36:30 +13:00
Jesse Hills
0ea97df1af
Add MICS-4514 gas sensor ( #4316 )
2023-01-25 09:58:44 +13:00
J. Nick Koston
615d591367
Always send the MTU request for BLE v3 cached connections ( #4322 )
...
closes https://github.com/esphome/esphome/pull/4321
fixes https://github.com/esphome/issues/issues/4041
fixes https://github.com/esphome/issues/issues/3951
2023-01-20 18:31:00 +13:00
functionpointer
a127e60e1b
Hydreon: Use new device classes water and precipitation_intensity ( #3993 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-20 13:56:26 +13:00
Paulus Schoutsen
13cfe11a19
Add upload dashboard api ( #4318 )
2023-01-20 09:28:28 +13:00
Stroe Andrei Catalin
6d65671f92
Add friendly name in MDNS records if it is not empty ( #4317 )
2023-01-20 09:13:18 +13:00
Jesse Hills
f2eafa8fbe
Add macro for sub sensor defining ( #4315 )
2023-01-19 17:36:43 +13:00
Samuel Sieb
5e2f33fde5
add Wiegand reader component ( #4288 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-01-18 14:37:54 +13:00
Dan Jackson
029ac75a04
set_retry: add retries remaining parameter to the provided function ( #4251 )
2023-01-18 14:26:32 +13:00
Valentin Ochs
3aa5953cd9
Implement a slow sigma-delta modulation based output ( #4132 )
2023-01-18 13:42:32 +13:00
Stanislav Habich
582d90ad72
PCA9685, fix reset device and add option EXTCLK ( #3845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-18 13:00:35 +13:00
Mathias Stock
bbb0105c2f
Add support for TEE501 ( #3773 )
2023-01-18 10:43:16 +13:00
Mathias Stock
37d17feecf
Add support for HTE501 ( #3772 )
2023-01-18 10:42:47 +13:00
Mathias Stock
4bf5faf808
Add support for EE895 ( #3771 )
2023-01-18 10:42:43 +13:00
Z3LIFF
ddedc1cd76
Tsl2591 gain publish ( #4291 )
...
fixes https://github.com/esphome/issues/issues/4031
2023-01-18 10:17:31 +13:00
Samuel Sieb
1bb90f304c
add key collector component ( #4242 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-01-17 17:18:34 +13:00
Jesse Hills
efc6a8df35
Dont default CORE.friendly_name ( #4305 )
2023-01-17 13:15:47 +13:00
Reuben
e35f90d6e4
Allow 0xA8 ID for APDS9960 ( #4287 )
...
fixes https://github.com/esphome/issues/issues/736
2023-01-17 13:14:45 +13:00
Gil Peeters
11518364a1
Display the configured esphome:comment on the WebServer ( #4246 )
2023-01-17 13:02:54 +13:00
Samuel Sieb
62c68f4d60
allow multiple dsmr ( #4299 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
fixes https://github.com/esphome/feature-requests/issues/2062
2023-01-17 10:36:44 +13:00
Jesse Hills
c301ae3645
Add friendly_name to device ( #4296 )
2023-01-17 10:28:09 +13:00
Jesse Hills
3d2d681a7b
Remove baud check in tuya dump_config ( #4298 )
2023-01-16 17:32:15 +13:00
tradeJmark
a45646af1b
Calculate PWM wrap dynamically whenever the frequency is changed ( #4294 )
...
fixes https://github.com/esphome/issues/issues/3841
2023-01-16 14:17:57 +13:00
Paulus Schoutsen
27185265f6
Clean up dashboard ping result post-rename/delete ( #4170 )
2023-01-16 13:31:03 +13:00
Joe
a9b7d98194
Fix off-by-one bedjet fan speed ( #3873 ) ( #4292 )
...
fixes https://github.com/esphome/issues/issues/3873
2023-01-16 13:27:34 +13:00
J. Nick Koston
ed4a7210d3
Ensure we never write zero bytes ( #4284 )
2023-01-16 13:24:32 +13:00
Adam Liddell
351ea04517
Fix use of dangling pointers in esp-idf MQTT backend ( #4239 )
...
fixes https://github.com/esphome/issues/issues/3406
2023-01-11 16:31:04 +13:00
NP v/d Spek
86a8e1f4a6
small DisplayBuffer images and font update ( #4044 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-11 14:55:02 +13:00
EtienneMD
1cf3424ebe
Add X9C Potentiometer component ( #4183 )
...
fixes https://github.com/esphome/feature-requests/issues/1270
2023-01-11 14:51:50 +13:00
Garret Buell
a19f0c0db0
Fix HttpRequestResponseTrigger again ( #4285 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/issues/issues/4010
2023-01-11 14:50:01 +13:00
Garret Buell
530df91044
Fix HttpRequestResponseTrigger ( #4270 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/issues/issues/4010
2023-01-11 12:27:30 +13:00
Stas
c16c0b11cb
http_request: add request duration logging ( #4272 )
2023-01-10 17:40:42 +13:00
Tom Keller
74556b28a8
fix: json compilation error on rp2040 ( #4273 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-10 17:40:04 +13:00
Joscha Wagner
48340d41d6
Fix frequency limit for MCP9600 ( #4276 )
2023-01-10 17:39:04 +13:00
Robin Pronk
b1f1329cee
Correct decimals in Growatt energy reporting ( #4277 )
...
fixes https://github.com/esphome/issues/issues/3888
2023-01-10 16:21:55 +13:00
Fabio Todaro
75dff1e102
Fix Template Switch restore_mode support ( #4280 )
...
fixes https://github.com/esphome/issues/issues/4020
2023-01-10 16:20:16 +13:00
Samuel Sieb
fe55f3a43d
Add support for matrix keypads ( #4241 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-01-10 16:06:54 +13:00
Samuel Sieb
657fd9d0d5
Don't match words containing "id" ( #4265 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
fixes https://github.com/esphome/issues/issues/3507
2023-01-10 13:54:15 +13:00
Kuba Szczodrzyński
19bf9b1e36
Add API for dashboard to get boards list by platform ( #4168 )
...
* Add API for dashboard to get boards list by platform
* Dashboard API: add board list for ESP32 S2/S3/C3
* Dashboard API: remove endpoint for all boards
* Dashboard API: hide group titles for all platforms
* Dashboard API: fix Python lint
* Dashboard API: refactor /boards to use list output
* Dashboard API: filter boards for selected platform
* Dashboard API: do not duplicate esp32 boards
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2022-12-31 14:02:56 -05:00
brogon
119a6920f2
PCF85063 RTC chip ( #3873 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-23 12:33:31 +13:00
cstaahl
8237e13c44
Fix broken PULSE_METER ( #4199 )
...
fixes https://github.com/esphome/issues/issues/3730
2022-12-23 11:07:45 +13:00
Cossid
53b60ac817
Add support for SM2235 and SM2335 LED drivers ( #3924 )
2022-12-23 11:04:21 +13:00
Cossid
a18ab748fd
Add support for BP1658CJ LED driver ( #4020 )
2022-12-23 10:39:44 +13:00
Cossid
917488bbc3
Add support for BP5758D LED driver ( #4021 )
2022-12-23 10:24:46 +13:00
Jesse Hills
7e376ae952
Add precipitation device class ( #4219 )
2022-12-22 21:18:58 +13:00
myhomeiot
57a1c207c2
Fix saving light state for restore modes LIGHT_RESTORE_AND_OFF/ON ( #4131 )
2022-12-22 20:57:53 +13:00
tomaszduda23
50e8e92f0b
Fix race condition in web_server scheduler on ESP32 ( #3951 )
2022-12-22 20:51:24 +13:00
Dan Jackson
ff4fd497c4
Component::set_retry updates ( #3305 )
2022-12-22 20:48:15 +13:00
Martin Flasskamp
33b1a853b9
calc LEDC PWM Resolution with LEDC_TIMER_BIT_MAX ( #3820 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/issues/issues/3128
2022-12-22 20:21:44 +13:00
Jan Grewe
f2df542cb1
Allow ignoring of failed Modbus response CRC ( #3930 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-22 20:14:11 +13:00
Dave T
ecbbf2d3f4
Ili9341 8bit indexed mode pt2 ( #2502 )
2022-12-22 19:53:53 +13:00
Matthew Donoughe
b76c7a0131
Use NAN values for TSL2591 saturation ( #3931 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-22 19:50:37 +13:00
Francisco J. Solis
9767856784
feat: set a wider range for jpeg quality ( #3872 )
...
fixes https://github.com/esphome/issues/issues/3570
2022-12-22 19:34:00 +13:00
Maurice Makaay
c1f09684e6
Handle deprecated sdkconfig option ( #4204 )
...
Co-authored-by: Maurice Makaay <maurice@h2b.nl>
fixes https://github.com/mmakaay/esphome-xiaomi_bslamp2/issues/104
2022-12-22 19:27:47 +13:00
Steve Rodgers
c0a4e07e5a
Add Pca9554 component ( #4192 )
2022-12-22 18:39:25 +13:00
Jesse Hills
8db3b59e0f
Fix gpio pin mode for ISR pins ( #4216 )
2022-12-21 14:03:00 +13:00
Jesse Hills
0d50caa179
Fix ESP32 GPIO when using INPUT PULLUP mode ( #4213 )
2022-12-20 23:09:33 +13:00
Deun Lee
8b06135b41
Fix UUID displaying incorrectly in BLE Tracker logs ( #4187 )
2022-12-19 20:36:16 -08:00
J. Nick Koston
573ea55187
Handle zero padding anywhere in the combined adv data ( #4208 )
...
fixes https://github.com/esphome/issues/issues/3913
2022-12-20 10:40:01 +13:00
Jesse Hills
b48b5d6cc7
Fix import_full_config for adoption configs ( #4197 )
...
* Fix git raw url
* Fix setting full config query param
* Force dashboard import urls to have a branch or tag reference for full import
2022-12-16 19:46:56 +13:00
Jesse Hills
39af967433
Fix i2s_audio media_player compiling for esp32-s2 ( #4195 )
2022-12-16 10:38:52 +13:00
Jesse Hills
83b5e01a28
Mark ESP32-S2 as not having Bluetooth ( #4194 )
2022-12-16 10:09:07 +13:00
Jesse Hills
9bf7c97775
Revert camera config change for esp-idf ( #4182 )
2022-12-14 11:45:51 +13:00
Jesse Hills
24bf3674f3
Remove warnings when falling through switch cases on purpose ( #4181 )
2022-12-14 11:45:43 +13:00
J. Nick Koston
c47dc09d34
Speed up bluetooth proxy connections when using esp-idf ( #4171 )
2022-12-13 13:57:12 +13:00
Jesse Hills
db3096c6e1
Remove internal pin restriction from cd74hc4067 ( #4179 )
2022-12-13 13:44:52 +13:00
Jesse Hills
d4e232f267
Increase watchdog timeout when starting OTA ( #4172 )
2022-12-12 16:16:24 +13:00
Björn Stenberg
cc45945fcf
climate: Add features to generic Toshiba model ( #3912 )
...
Add fan speed modes, dry and fan-only operation modes.
This reduce differences between generic and PT14111 models.
2022-12-08 14:13:10 -06:00
Jesse Hills
0c24d951ff
Fix ble parsing with zero padded advertisements ( #4162 )
2022-12-08 13:39:33 +13:00
John Britton
92e44b8238
Expose lambda action to reset a cycle in slow_pwm ( #4158 )
2022-12-07 19:27:14 +13:00
Jesse Hills
34387adbcd
Bump version to 2023.1.0-dev
2022-12-07 17:00:11 +13:00
Jesse Hills
6ad9baa870
Add API for dashboard to get boards list ( #4154 )
2022-12-07 16:07:51 +13:00
Jesse Hills
f843925301
ESP32 IDF: Override toolchain-esp32ulp with espressifs own published version ( #4155 )
2022-12-07 16:01:26 +13:00
pistifonok
4a3b628946
Fixed deep sleep for ESP32C3 ( #4143 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-07 15:59:25 +13:00
Jesse Hills
4ffdc38cf5
Add sn74hc165 input shift register ( #4151 )
2022-12-07 12:10:25 +13:00
Dennis
f83f1bff19
Invalid config for waveshare models with no full_update_every ( #4066 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-07 11:53:20 +13:00
Jesse Hills
9370ff3dfa
Allow dashboard import to pull complete file from github ( #3982 )
2022-12-07 07:29:56 +13:00
Jesse Hills
2053b02c61
Add reports fahrenheit to tuya climate ( #4032 )
2022-12-07 07:29:18 +13:00
Jesse Hills
f34e797a0d
Change 4 chip limit on sn74hc595 to 256 ( #4108 )
2022-12-07 07:23:07 +13:00
Samuel Sieb
30a2fc1273
fix switch initialization ( #4153 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
fixes https://github.com/esphome/issues/issues/3878
2022-12-06 23:25:19 +13:00
Matthew Schinckel
48da5ef1c4
Use ENTITY_CATEGORY_CONFIG for sprinkler config switches. ( #4141 )
...
Update esphome/components/sprinkler/__init__.py
Co-Authored-By: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2022-12-05 21:00:48 -06:00
J. Nick Koston
dbbbba3cf8
Fix crash with bluetooth tracker and esp-idf ( #4140 )
2022-12-06 08:49:39 +13:00
J. Nick Koston
3b2bbd306f
Detect BLE stack unrecoverable state ( #4128 )
2022-12-06 07:42:51 +13:00
Jesse Hills
dfcccda69e
Fix board pin alias lookup ( #4147 )
2022-12-05 19:46:00 +13:00
dependabot[bot]
de352c1609
Bump esptool from 3.3.1 to 4.4 ( #4071 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-12-05 10:08:22 +13:00
Jesse Hills
f28f712827
Bump arduino pico and update wifi methods ( #4144 )
2022-12-05 08:55:38 +13:00
Jesse Hills
b63ade298f
Fix queuing scripts not compiling ( #4077 )
2022-12-01 13:17:44 +13:00
Nicolas Graziano
f117d4f50a
Dashboard, after login use relative url. ( #4103 )
2022-12-01 13:15:32 +13:00
Jesse Hills
2dd032475b
Allow global setting of compile process limit ( #4081 )
2022-12-01 12:51:01 +13:00
Javier Peletier
106c1bfac2
fix RESTORE_INVERTED switch:restore_mode ( #4129 )
...
fixes https://github.com/esphome/esphome/pull/3648
2022-12-01 12:49:15 +13:00
Jesse Hills
eb2a0f45db
current-based cover fix copy paste mistake ( #4124 )
2022-11-30 10:59:20 +13:00
Jesse Hills
2b4fdd6c39
Allow auto setting of ble client id if there is only 1 in config ( #4125 )
2022-11-30 10:59:02 +13:00
Patrick Collins
3669320398
PID Climate - deadband and output sampling ( #3254 )
2022-11-30 10:58:43 +13:00
Javier Peletier
d706f40ce1
modbus_switch: honor switch:restore_mode ( #4122 )
2022-11-30 10:44:31 +13:00
J. Nick Koston
027284c29c
Speed up uuid parsing when fetching the service list ( #4121 )
2022-11-30 10:11:48 +13:00
Javier Peletier
c55e01ff3f
FIX: Unnecessary flash writes by ModbusSwitch component ( #3648 )
2022-11-30 10:05:40 +13:00
J. Nick Koston
a59ce7bfa2
Avoid parsing services with v3 connections without cache ( #4117 )
...
Co-authored-by: Daniel Cousens <413395+dcousens@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account+github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-30 09:40:31 +13:00
Jesse Hills
eb664b99ba
preprocess out proto_enum_to_string if not needed ( #4119 )
2022-11-30 08:30:00 +13:00
J. Nick Koston
8414bb9a7a
Active BLE connection v3 ( #4113 )
...
Co-authored-by: Daniel Cousens <413395+dcousens@users.noreply.github.com>
Co-authored-by: Maurice Makaay <account+github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-30 07:53:32 +13:00
J. Nick Koston
ccef7c322f
Remove uuid lookups from BLE read/write/notify characteristics ( #4102 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-29 17:30:19 +13:00
Jesse Hills
120327866f
Send device address type alongside ble advertisements ( #4115 )
2022-11-29 17:24:21 +13:00
J. Nick Koston
bc5c2d4eb4
Avoid parsing characteristics and descriptors to reduce memory pressure ( #4109 )
2022-11-29 17:16:25 +13:00
J. Nick Koston
d5ff8f6117
Reduce memory needed to send the services list ( #4110 )
2022-11-29 17:14:29 +13:00
J. Nick Koston
ad0d6f6337
Combine the scanner failure check so we only stop the scanner once ( #4111 )
2022-11-29 17:11:54 +13:00
J. Nick Koston
873de13b3d
Fix bluetooth_gatt_write_descriptor never getting a response ( #4112 )
2022-11-29 17:10:02 +13:00
J. Nick Koston
73c82862cf
Improve reliability of bluetooth active connections ( #4049 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-29 08:15:40 +13:00
J. Nick Koston
75573a3ed1
Fix descriptors not being deleted ( #4104 )
2022-11-29 07:49:41 +13:00
J. Nick Koston
1166d93805
Fix registering for gatt notify when characteristic only support indicate ( #4092 )
2022-11-28 14:03:33 +13:00
J. Nick Koston
ac112a32c9
Add logging for BLE connection slots ( #4098 )
2022-11-28 13:39:35 +13:00
J. Nick Koston
cee45c1221
Make sure all BLE address strings are uppercase ( #4097 )
2022-11-28 13:33:17 +13:00
J. Nick Koston
fb56b5388e
Suppress logging unhandled ESP_BLE_AD_TYPE_INT_RANGE ( #4096 )
2022-11-28 13:31:13 +13:00
J. Nick Koston
ed42cefeee
Align BLE service logging ( #4095 )
2022-11-28 13:30:41 +13:00
J. Nick Koston
9052947a71
Speed up BLE connections ( #4093 )
2022-11-28 13:30:05 +13:00
J. Nick Koston
53e0af18fb
Make parse_characteristics and parse_descriptors lazy to reduce memory pressure ( #4063 )
2022-11-28 13:28:02 +13:00
Maurice Makaay
c5f59fad62
Fix regressed 'esphome run' ( #4094 )
2022-11-27 08:17:07 +13:00
Jesse Hills
b089a4ea80
Allow manually specifying binary file to OTA ( #4054 )
2022-11-25 13:47:02 +13:00
Jesse Hills
555bba7698
Don't convert climate temperature step ( #4082 )
2022-11-24 16:00:09 +13:00
Brian Kaufman
294901fbe9
Fix units for refresh: never ( #4048 )
2022-11-24 13:31:37 +13:00
Samuel Sieb
ec576bf9f9
fix missing library ( #4051 )
2022-11-24 13:22:04 +13:00
Jesse Hills
9273e3775b
Add vector includes ( #4080 )
2022-11-24 13:12:55 +13:00
Jesse Hills
ce5cedb466
Update ESP32-audioI2S library ( #4073 )
2022-11-24 11:16:05 +13:00
Jesse Hills
b184b01600
Remove a bunch of unnecessary pylint disabling ( #4079 )
2022-11-24 11:09:19 +13:00
Jesse Hills
81b4078871
Don't allow debug component if you don't have at least debug logging level ( #4076 )
2022-11-23 22:42:20 +13:00
Jesse Hills
d067c8f80b
Dont set esp32 pin drive strength unless pin is set for output ( #4075 )
2022-11-23 20:39:19 +13:00
Jens-Christian Skibakk
8975b4b3f6
Boards: Adafruit QT Py ESP32 Pico/C3/S2 ( #4064 )
2022-11-23 12:54:40 +13:00
Alex Reid
20da03f8c6
Midea ir templatable code ( #4053 )
2022-11-23 12:53:48 +13:00
Jesse Hills
ef26677b67
Always use brackets around single log macros ( #4072 )
2022-11-23 10:32:51 +13:00
Jesse Hills
91925b1826
Update ESP-IDF and platform version ( #3565 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-11-23 09:54:55 +13:00
J. Nick Koston
1f33ad037d
Avoid creating a new espbt::ESPBTUUID each loop when registering for notify ( #4069 )
2022-11-23 09:46:59 +13:00
J. Nick Koston
fef60e335e
Avoid 128bit uuid loop for 16/32 bit uuids ( #4068 )
2022-11-23 09:46:23 +13:00
Jesse Hills
0f9c956c04
Remove manual handling of ethernet power pin ( #4062 )
2022-11-23 09:43:43 +13:00
Jesse Hills
7258a82875
rp2040_pwm frequency is per pair of pins ( #4061 )
2022-11-22 21:12:33 +13:00
Jesse Hills
7896a7783b
Update web_server index ( #4060 )
2022-11-22 12:41:51 +13:00
Jesse Hills
621771e1ee
Fix rp2040 pwm to use pico-sdk, not mbed ( #4059 )
2022-11-22 12:19:52 +13:00
uPesy Electronics
2b032e8606
Add pin aliases for upesy boards ( #3794 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-21 19:03:59 +13:00
Yuval Brik
5e1b724697
Add Lolin S2 Mini board ( #3264 )
...
fixes https://github.com/esphome/feature-requests/issues/1626
2022-11-21 19:03:21 +13:00
Jesse Hills
e6db61c2f0
Update esp32 boards list ( #4056 )
2022-11-21 14:15:32 +13:00
Jesse Hills
c2e198311c
Update esp32 arduino and platform versions ( #3564 )
2022-11-21 11:49:30 +13:00
Franck Nijhof
d874626662
Add number device class support ( #4042 )
2022-11-18 08:01:28 +13:00
Jesse Hills
719c212009
Support ADC on RP2040 ( #4040 )
2022-11-17 13:51:08 +13:00
Brian Kaufman
65030e1c37
remove unused variable last_save_ in total_daily_energy ( #4039 )
2022-11-17 13:45:58 +13:00
Jesse Hills
147b113b62
Always save user wifi credentials if non in config ( #4036 )
2022-11-16 15:46:33 +13:00
Kuba Szczodrzyński
392dc8b0db
Add reset_reason text sensor to debug component ( #3814 )
2022-11-16 08:14:20 +13:00
2mikrobi
2f62426f09
Update_interval less that 1 second in QMC5883L integration ( #4031 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-16 08:12:09 +13:00
Jesse Hills
cb2d9e4bec
Mark mqtt as unavailable on rp2040 ( #4025 )
2022-11-14 13:29:53 +13:00
Jesse Hills
9e3ee28744
Fix time components on rp2040 ( #4024 )
2022-11-14 13:29:41 +13:00
Jesse Hills
472dcebf2c
Mark webserver and captive portal as not available on rp2040 ( #4023 )
2022-11-14 13:19:32 +13:00
Samuel Sieb
2f18ae00c5
fix to_lower filter ( #4015 )
2022-11-11 07:40:53 +13:00
Jesse Hills
27a339fa12
Move CONF_INTERRUPT_PIN to const.py ( #4014 )
2022-11-10 22:49:04 +13:00
RoboMagus
2c2e68123a
Fix local webserver based on esphome/esphome-webserver#17 ( #3958 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/issues/issues/3720
2022-11-10 10:59:42 +13:00
H. Árkosi Róbert
fcec7d45cb
add two new icons ( #3963 )
2022-11-10 09:46:51 +13:00
Jesse Hills
7c8f502e7e
Add option for dashboard command to only generate the project and supporting files ( #3981 )
2022-11-10 09:42:03 +13:00
maringeph
dc17c47634
Add cover toggle support to current based cover ( #3950 )
2022-11-10 09:40:13 +13:00
Jesse Hills
3155f02be6
Bump version to 2022.12.0-dev
2022-11-09 17:27:19 +13:00
jimtng
8c122aa372
Add support for parameters in scripts ( #3538 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/feature-requests/issues/241
2022-11-09 16:51:59 +13:00
Gilles van den Hoven
dc794918ed
Enable calibration, callbacks and custom commands for EZO sensors ( #3910 )
...
Co-authored-by: PoppyPop <skytep@gmail.com>
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-11-09 16:46:31 +13:00
Jens-Christian Skibakk
291deb12ad
Skip validation of defined pins ( #3999 )
2022-11-08 19:06:45 +13:00
Stanislav Meduna
2c76381fcd
Implement a simple LCD menu ( #3406 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-07 19:00:55 +13:00
tomaszduda23
90683223dd
add uart number to LOGCONFIG ( #3996 )
2022-11-06 15:58:56 -08:00
Jesse Hills
de79171815
RP2040 uart support ( #3990 )
2022-11-07 10:01:40 +13:00
Jesse Hills
1554c5700e
rp2040: Set watchdog to reboot properly ( #3991 )
2022-11-03 20:47:19 +13:00
mbardeen
04883e14f6
Allow the use of multiple RDM6300 devices ( #3989 )
2022-11-02 22:25:09 -07:00
Jesse Hills
0e66c899ce
Allow multiple bluetooth proxy connections ( #3971 )
2022-11-02 23:02:33 +13:00
Jesse Hills
e5b8dd7f2d
Fix bluetooth_proxy not connecting ( #3967 )
2022-10-29 12:42:48 +13:00
Jesse Hills
40e0cd0f03
Make some minor changes to I²C so rp2040 works ( #3959 )
2022-10-28 12:33:49 +13:00
Jesse Hills
bf4d3df906
Fix RP2040 SPISettings ( #3960 )
2022-10-28 12:33:15 +13:00
Jesse Hills
0e30c49e3f
Allow using LED pin on rpi pico-w ( #3957 )
2022-10-28 10:06:22 +13:00
Jesse Hills
e61a01f7bb
Fix imports for rp2040 with no wifi ( #3956 )
2022-10-28 08:12:12 +13:00
Paul Nicholls
f8640cf2cd
[SM300D2] Reduce log severity for successful reads ( #3955 )
2022-10-27 19:27:17 +13:00
Jesse Hills
4bcfeb6e33
Update rp2040 to latest framework release from GitHub ( #3954 )
2022-10-27 19:26:22 +13:00
Jesse Hills
a5d4ca0f6d
Some RP2040 wifi changes for AP mode ( #3953 )
2022-10-27 19:14:41 +13:00
Jesse Hills
85faecb2fd
Add core config option to limit compile process count ( #3952 )
2022-10-27 12:17:21 +13:00
Jesse Hills
991fc54994
Bump esphome/Improv to 1.2.3 ( #3948 )
2022-10-27 07:44:15 +13:00
Jesse Hills
2de891dc32
Fix filesystem size for RP2040 OTA ( #3947 )
2022-10-26 22:57:08 +13:00
Jesse Hills
9865cb7f55
Implement RP2040 preferences ( #3946 )
2022-10-26 22:56:56 +13:00
Jesse Hills
f97252b93a
Implement InterruptLock for RP2040 ( #3945 )
2022-10-26 16:41:51 +13:00
Franck Nijhof
237c7dd169
Add wind_speed sensor device class ( #3941 )
2022-10-26 07:35:12 +13:00
NP v/d Spek
b781b8d77d
Fixed touch release issue using the interrupt pin ( #3925 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-26 07:33:18 +13:00
Franck Nijhof
60b7d1c8a1
Add water & precipitation_intensity sensor device classes ( #3940 )
2022-10-25 20:37:19 +13:00
cvwillegen
8161222b33
Show local mac when scanning wifi ( #3635 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-25 19:50:46 +13:00
H. Árkosi Róbert
1000c4466f
add proper device class to uptime ( #3928 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-25 19:10:03 +13:00
Jesse Hills
60717b074e
Implement different random for rp2040 ( #3939 )
2022-10-25 17:59:10 +13:00
Jesse Hills
d93f35701f
Send manufacturer name via API ( #3938 )
2022-10-25 17:24:38 +13:00
Jesse Hills
702b60ce66
Make mDNS on rp2040 work ( #3936 )
2022-10-25 16:23:20 +13:00
Jesse Hills
f8ce597918
Fix error with require_framework_version and rp2040 ( #3923 )
2022-10-25 13:47:48 +13:00
Jesse Hills
22e0a944c8
Update bluetooth proxy limit as soon as connection requested ( #3935 )
2022-10-25 12:54:10 +13:00
Jesse Hills
96e8cb66b6
Fix missing dependencies for heatpumpir ( #3933 )
2022-10-25 12:12:55 +13:00
Jesse Hills
6153bcc6ad
Initial Support for RP2040 platform ( #3284 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2022-10-20 16:50:39 +13:00
RoboMagus
e87edcc77a
Add API interface to request a complete device config as JSON. ( #3911 )
...
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2022-10-19 23:39:34 -04:00
hagak
d7576f67e8
Added component Daikin BRC to support ceiling cassette heatpumps ( #3743 )
2022-10-19 20:29:22 +13:00
Maximilian
138de643a2
Add adc128s102 sensor ( #3822 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 17:06:22 +13:00
Carlos Gustavo Sarmiento
f30e54d177
Implementation for Atlas Scientific Peristaltic Pump ( #3528 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 16:08:27 +13:00
Jadson Santos
41b5cb06d3
New platform ethernet_info from component text_sensor ( #3811 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 13:44:48 +13:00
Marcel Hoppe
4ac72d7d08
Add support for wl-134 ( #3569 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 13:44:26 +13:00
Jesse Hills
8bb670521d
Remove address type map from bluetooth proxy ( #3905 )
2022-10-15 08:35:35 +13:00
Frédéric Jouault
225b3c1494
Send true and not RSSI in ble_presence ( #3904 )
2022-10-14 12:47:05 +13:00
Kuba Szczodrzyński
4bf94e0757
Allow preserving WiFi credentials entered with captive_portal ( #3813 )
2022-10-14 08:58:42 +13:00
Brian Kaufman
3b21d1d81e
Don't Use Base Network Manual IP for WiFi AP ( #3902 )
2022-10-14 08:55:59 +13:00
Frank Riley
5ec1588110
Update the ibeacon code ( #3859 )
2022-10-13 12:59:07 +13:00
Sergey Dudanov
71387be72e
Modbus QWORD fix ( #3856 )
2022-10-13 12:50:45 +13:00
Guillermo Ruffino
98171c9f49
fix never calling preset change trigger ( #3864 )
...
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2022-10-13 10:11:59 +13:00
Jesse Hills
bf15b1d302
Bump version to 2022.11.0-dev
2022-10-13 09:18:46 +13:00
definitio
48a1797e72
Do not require CS pin for ST7789V ( #3888 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-13 08:26:28 +13:00
Jesse Hills
b34d24735a
Send GATT error events to HA ( #3884 )
2022-10-12 22:22:07 +13:00
Chris Feenstra
fe38b36c26
Add support for ZHLT01 heatpump IR protocol ( #3655 )
...
Co-authored-by: Chris Feenstra <chris@cfeenstra.nl>
2022-10-12 15:29:57 +13:00
cstaahl
03fca8d91e
Fix pulse_meter filter logic ( #3321 )
2022-10-12 15:26:35 +13:00
RoboMagus
9f9980e338
Add ble RSSI sensor for connected devices ( #3860 )
2022-10-12 15:23:56 +13:00
Quentin Smith
19900b004b
Fix type annotation on extract_registry_entry_config ( #3623 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-12 15:15:03 +13:00
Gustavo Ambrozio
a8ff0a8913
Exposing coordinates from touchscreen binary sensor ( #3891 )
2022-10-11 12:22:13 +13:00
RoboMagus
45861456f1
Fix default unit for ble_rssi sensor ( #3874 )
2022-10-11 12:03:54 +13:00
RoboMagus
44b335e7e3
Correctly set ble_write UUIDs based on their lengths. ( #3885 )
2022-10-11 12:02:53 +13:00
Jesse Hills
de23bbace2
Update webserver index file ( #3896 )
2022-10-11 12:01:41 +13:00
RoboMagus
edff9ae322
Proxy friendly host url resolution for use_address with path. ( #3653 )
2022-10-11 12:01:31 +13:00
NP v/d Spek
3c2766448d
Refactor xpt2046 to be a touchscreen platform ( #3793 )
2022-10-11 10:10:22 +13:00
Jesse Hills
786c8b6cfe
Add new sensor device classes ( #3895 )
2022-10-11 09:54:58 +13:00
Jesse Hills
fd57b21aff
Dont add wifi block to yaml if discovered device uses ethernet ( #3882 )
2022-10-07 15:35:48 +13:00
Jesse Hills
01b7c4200e
Add network type to mdns service message ( #3880 )
2022-10-07 14:42:28 +13:00
Jesse Hills
d220d41182
Bump python min to 3.9 ( #3871 )
2022-10-05 20:09:27 +13:00
Jesse Hills
c3a8972550
Add min_version to esphome config ( #3866 )
2022-10-05 16:30:56 +13:00
Javier Peletier
584b722e7e
Fix time/automation (cron) wdt crash when time jumps ahead too much ( #3844 )
2022-10-05 14:52:45 +13:00
Javier Peletier
05edfd0e82
Add cg.with_local_variable ( #3577 )
2022-10-05 11:50:03 +13:00
Guillermo Ruffino
e8ff36d1f3
fix dump preset string type ( #3863 )
2022-10-04 10:50:33 +13:00
Jesse Hills
ed443c6153
Bluetooth Proxy active connections ( #3817 )
2022-10-04 10:45:06 +13:00
Keith Burzinski
f4a84765cd
Add display GPIO setup instruction for Aliexpress display ( #3851 )
2022-09-30 19:10:53 +13:00
J. Nick Koston
106de3530d
Add support for parsing the short local name in the tracker ( #3854 )
2022-09-30 09:15:30 +13:00
Michael Davidson
8095db6715
Thermostat remove deprecated config ( #3643 )
...
* Raise errors for all the now deprecated options
* Fix CONF_DEFAULT_PRESET detection
* Stop attempting to set the non-existent normal_config
* Add support for default presets
* Fix correct detection of Two Point temperature mode
* Fix lint issues
* Fix tests
* Generate correct yaml for equivalent configurations
* Remove debug code
* Only set default preset if the thermostat does not have state to restore
* Add restore_default_preset_on_boot option
If set to True then the default_preset will be applied on every boot. If False (Default) state will be restored from memory as per prior versions
* Apply lint suggestions
* Switch from restore_default_preset_on_boot to an enum for startup_behavior
This gives better self-documentation as well as the option for extending to other options down the track
* Lint fixes
* Rename startup_behavior to on_boot_restore_from
This removes any issues with different English locales
* Fix comparable_preset yaml output alignment
* Add dump of on_boot_restore_from setting
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2022-09-25 21:59:04 -05:00
Jesse Hills
6ef93452f5
Revert "fix spi timing issues" ( #3838 )
2022-09-22 07:38:31 +12:00
Guillermo Ruffino
1444cddda9
Fix-esphome-validation-line-number ( #3815 )
2022-09-20 17:23:55 +12:00
Keith Burzinski
ab8674a5c7
Make sprinkler reset_resume() method public ( #3824 )
2022-09-20 13:02:55 +12:00
Geek_cat
d1c85fc3fa
Allow CORS for web_server ( #3819 )
2022-09-20 13:01:00 +12:00
h3ndrik
55ad45e3ee
[BME280] raise standby time ( #3804 )
2022-09-19 07:25:59 +12:00
pawel3410
f6e5a8cb2a
Fix mcp23s17 addressing beyond 3 ( #3797 )
2022-09-15 18:19:41 -07:00
Samuel Sieb
7a91ca9809
split pronto codes if they are too long ( #3812 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-09-16 07:27:50 +12:00
Azimath
917bbc669c
Remove floating point calculation from ac_dimmer ISR ( #3770 )
2022-09-15 11:54:33 +12:00
Jesse Hills
0ac4c055de
Initialize all child sensors to nullptr ( #3808 )
2022-09-15 11:53:22 +12:00
RoboMagus
78b55d86e9
Unify 'nullptr' initalization of class members; ( #3805 )
2022-09-15 11:53:02 +12:00
Guillermo Ruffino
aaf50fc2e6
Sim800l add calls, multiline sms and ussd ( #3630 )
...
Co-authored-by: Matus Ivanecky <matus.ivanecky@gmail.com>
Co-authored-by: Matus Ivanecky <maty535@users.noreply.github.com>
2022-09-15 07:43:03 +12:00
RoboMagus
6a8f4e92df
null initialize total sensor for pulse counter ( #3803 )
...
* null initialize total sensor.
* pedantic styling fix
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2022-09-14 10:01:28 -03:00
Jesse Hills
88943103a2
Bump version to 2022.10.0-dev
2022-09-14 17:02:22 +12:00
Ignacio Hernandez-Ros
f1e8cc2cf0
fix spi timing issues ( #3763 )
2022-09-14 16:53:51 +12:00
Pascal Vizeli
6236db1a27
Add uFire ISE sensor ( #3789 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-14 16:51:20 +12:00
Jesse Hills
f4b0917239
Allow ble tracker to subscribe to ota start and stop the scanning ( #3800 )
2022-09-14 16:49:20 +12:00
Aleš Komárek
a5e3cd1a42
Add Prometheus Service Discovery for online devices ( #3788 )
2022-09-14 15:22:59 +12:00
Jesse Hills
b3cca5dcb6
Add stop action for ble scanning ( #3799 )
2022-09-14 14:57:45 +12:00
Jonathan V
49465223a4
esp32_ble_tracker continuous and one shot scanning modes ( #3649 )
...
Co-authored-by: Jonathan Valdez <@jonofmac>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-14 11:10:12 +12:00
Pascal Vizeli
ed8f343aad
Remove status_set_error from ufire_ec ( #3792 )
2022-09-13 11:17:33 +12:00
Jordan W. Cobb
cbd8d70431
Add support for TM1638 Led and Key component ( #3340 )
2022-09-12 08:30:15 -07:00
Carlos Garcia Saura
be473b97c4
[MPU6050] Support devices with WHOAMI 0x98 ( #3784 )
2022-09-12 10:32:07 +12:00
anatoly-savchenkov
9a5f865eea
Add Factory Reset button and switch ( #3724 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-12 10:23:46 +12:00
David Buezas
8ba207fc7f
Add support for BL0942 voltage, current, energy and power Sensor ( #3777 )
2022-09-12 09:36:09 +12:00
Keilin Bickar
d66b2a1778
Add support for MPL3115A2 Pressure/Altitude and Temperature Sensor ( #3371 )
...
* Add support for mpl3115a2
* Add codeowner
* Linter/test updates
* Minor changes
* Made pressure/altitude exclusive
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-09 00:18:02 -05:00
Pascal Vizeli
e3f2562047
u-fire EC sensor ( #3774 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-08 22:30:07 +12:00
Philippe FOUQUET
f77118a90c
Add support to tm1621 display ( #3737 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-08 11:40:27 +12:00
Jesse Hills
635851807a
Fix HA addon auth using HA credentials ( #3758 )
2022-09-06 16:41:23 +12:00
Jesse Hills
c317422ed7
Move crc16 to helpers ( #3780 )
2022-09-06 12:57:21 +12:00
Jesse Hills
614eb81ad7
Remove unneeded line (spi component adds it) ( #3778 )
2022-09-06 11:54:32 +12:00
Avirsaam
219c5953f1
Update modbus_controller.cpp ( #3768 )
2022-09-05 12:50:27 +12:00
anatoly-savchenkov
7a4cf13e0c
Ignore NaN states in the integration component ( #3767 )
2022-09-04 19:21:17 +12:00
NP v/d Spek
4788a6182e
I found some issue in the ili9341 driver ( #3756 )
2022-09-02 15:46:51 +12:00
RoboMagus
1b4156646e
Esp32 pulsecounter optional pcnt ( #3691 )
...
Co-authored-by: RoboMagus <->
2022-09-02 13:22:34 +12:00
dependabot[bot]
2650441013
Bump pylint from 2.14.5 to 2.15.0 ( #3746 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-31 17:01:36 +12:00
Fabian Berthold
acd55b9601
Add sum type to binary_sensor_map ( #3541 )
2022-08-31 16:52:16 +12:00
yuhei mukoyama
0907de8662
Add AEHA IR Protocol ( #3726 )
2022-08-31 16:43:33 +12:00
Wouter van der Wal
15eb9605a8
ibeacon support for the ble_rssi sensor ( #3745 )
2022-08-31 16:42:48 +12:00
Joe
6d5cb866db
Add BedJet Fan child component ( #3735 )
2022-08-31 13:53:18 +12:00
Keith Burzinski
768490089e
Add IP101 support to Ethernet component ( #3751 )
2022-08-31 13:45:30 +12:00
Jesse Hills
4d66fab360
Tidy up switch schemas ( #3754 )
2022-08-31 13:43:46 +12:00
Jesse Hills
bd6bc283b6
Remove unnecessary schema extension on template button ( #3753 )
2022-08-31 11:45:06 +12:00
anatoly-savchenkov
3120a0ba83
Captive portal show nearby WiFi with no ssid configured ( #3748 )
2022-08-31 10:19:43 +12:00
andyboeh
b2199d5464
mcp23017: read output latch registers during setup ( #3744 )
2022-08-31 10:07:40 +12:00
Jan Grewe
84bac8356a
Add Prometheus metrics relabeling ( #3734 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2022-08-30 10:55:55 +12:00
Frank Riley
2819166539
Support high update rates and fix several bugs in the cse7766 component. ( #3675 )
2022-08-25 16:12:45 +12:00
MrEditor97
8fa18ca7c7
Support for MCP9600 Thermocouple Amplifier ( #3700 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-25 15:49:31 +12:00
NP v/d Spek
63290a265c
add color compare operator's ( #3730 )
2022-08-25 13:41:52 +12:00
Jesse Hills
b854e17995
Initial bluetooth_proxy support ( #3736 )
2022-08-25 07:13:44 +12:00
Samuel Sieb
5dec9d88f6
add log messages for bad pronto codes ( #3738 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-08-23 13:26:36 +12:00
Mike Ryan
3d0a85ee78
Add bitmap font support ( #3573 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-08-19 10:49:52 +12:00
Keith Burzinski
ac3cdf487f
Fix SPI HW selection for ESP32 variants ( #3728 )
2022-08-19 07:55:10 +12:00
Sebastian Lövdahl
a47e92f2bc
Let favicon be cached ( #3729 )
2022-08-19 07:54:10 +12:00
Keith Burzinski
fc15ddfa91
Add dps310 sensor support ( #3704 )
...
Co-authored-by: Greg Arnold <greg@arnoldassociates.com>
2022-08-19 07:49:35 +12:00
Jesse Hills
d546ef941f
Add final validate for i2c with mix/max frequency ( #3727 )
...
Co-authored-by: MrEditor97 <mr.samuel.hughes@gmail.com>
2022-08-18 11:04:50 +12:00
Stijn Tintel
b4bbe3d7b5
wifi: support 802.11k and 802.11v ( #3600 )
2022-08-17 21:10:43 +12:00
functionpointer
5561d4eaeb
hydreon_rgxx: Support lens_bad, em_sat and temperature ( #3642 )
2022-08-17 16:07:33 +12:00
Samuel Sieb
0f6dab394a
fix grow password setting ( #3722 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-08-16 20:41:46 -07:00
Samuel Sieb
43539f2dbf
Send CR also for commands for sim800l ( #3719 )
2022-08-17 10:35:44 +12:00
Ignacio Hernandez-Ros
df6830110d
Improve OTA error messages adding return codes ( #3698 )
2022-08-16 21:51:05 +12:00
rbaron
1a524a5a50
Makes ble_client.ble_write's action value templatable ( #3715 )
2022-08-16 14:40:58 +12:00
rbaron
1a2288cccf
Fixes BLE remote address type when connecting ( #3702 )
2022-08-15 15:09:33 +12:00
buxtronix
8df27d4c3f
Only trigger ble_client on_connect after discovering services ( #3710 )
2022-08-15 15:06:05 +12:00
puuu
0688deca6b
Add support for pvvx mithermometer display via ble client ( #3333 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-15 10:56:25 +12:00
anatoly-savchenkov
01a4443b6c
Webui small fixes ( #3713 )
2022-08-15 10:28:29 +12:00
Samuel Sieb
e008b054cb
support modifying the apds9960 settings ( #3708 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-15 10:16:56 +12:00
NP v/d Spek
1cf213dad8
add gradient color V2.0 ( #3709 )
2022-08-15 08:21:08 +12:00
Peter Galantha
aeb81e547b
Add state_class total ( #3608 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-11 14:00:09 +12:00
Jesse Hills
479f7703a2
Add vector include ( #3707 )
2022-08-11 13:57:42 +12:00
anatoly-savchenkov
c7dc396b6d
Improve Web view for Climate components ( #3706 )
2022-08-11 13:32:55 +12:00
Jesse Hills
80e3030811
Bump version to 2022.9.0-dev
2022-08-10 15:26:02 +12:00
RoboMagus
029014d9d6
Add priority to on_shutdown trigger ( #3644 )
2022-08-10 13:10:49 +12:00
Adrián Panella
4d56a975e6
Create feedback cover component ( #3253 )
2022-08-09 17:21:27 +12:00
anatoly-savchenkov
ac10e27f08
[Nextion] Add on_page trigger ( #3673 )
2022-08-09 12:44:20 +12:00
NP v/d Spek
34df7a6072
add gradient color ( #3687 )
2022-08-09 12:29:41 +12:00
Keith Burzinski
e2cddf1005
Sprinkler controller component ( #2249 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-09 12:19:42 +12:00
Ian Blais
ced423748e
Adding support for Whynter ARC-14S/SH Air Conditioners ( #3641 )
2022-08-09 10:49:03 +12:00
davestubbs
77fb02729e
Added support for setting the current animation frame ( #3681 )
2022-08-09 10:28:05 +12:00
Joe
fef39b9fbe
Refactor BedJet climate into Hub component ( #3522 )
2022-08-09 10:14:37 +12:00
Jesse Hills
02810105fb
Add helpers to switch python for schema and codegen ( #3693 )
...
* Add helpers to switch python for schema and codegen
* Add icon back
2022-08-07 22:01:17 -05:00
rbaron
baad92515b
Introduces ble_client.ble_write Action ( #3398 )
2022-08-08 12:59:55 +12:00
dentra
a12c6b5f35
Fix panic abort when BLEClient reconnects ( #3594 )
2022-08-08 07:57:43 +12:00
Keith Burzinski
522646c64d
Extend ST7789V component to support additional displays ( #3651 )
...
Co-authored-by: definitio <37266727+definitio@users.noreply.github.com>
2022-08-08 07:54:48 +12:00
anatoly-savchenkov
4791093e48
Add get_ap() method to WiFi ( #3684 )
2022-08-08 07:51:09 +12:00
Donovan Baarda
599a455150
Add a soft reset in setup() for bme280. ( #3615 )
2022-08-08 07:50:15 +12:00
Samuel Sieb
2deef16ebe
fix sx1509 use of pullup and pulldown ( #3689 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-08-08 07:39:41 +12:00
RoboMagus
989b7be99b
Pass optional args to 'new_Pvariable' when creating new entities ( #3690 )
2022-08-08 07:31:50 +12:00
Derek M
cd473e1395
Adding option to report signal strength on pvvx_mithermometer ( #3688 )
...
Co-authored-by: doolbneerg <doolbneerg@outlook.com>
2022-08-08 07:30:30 +12:00
Jesse Hills
e246ebfb2e
Remove old unused code in mcp23xxx_base ( #3685 )
2022-08-07 09:56:52 +12:00
Borys Pierov
8546ae56da
Allow GPIO20 for ESP32 ( #3680 )
2022-08-04 07:30:19 +12:00
Sybren A. Stüvel
9e227b0192
Upgrade rweather/Crypto from 0.2.0 to 0.4.0 ( #3593 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-03 07:58:03 +12:00
Samuel Sieb
ba7737e9f8
dalybms: support changing the address ( #3676 )
2022-08-03 07:48:02 +12:00
Samuel Sieb
e7cfb5492e
Use correct struct members. ( #3672 )
2022-08-02 17:09:17 +12:00
Samuel Sieb
9ed136dc3a
Use application/json instead of text/json ( #3671 )
2022-08-02 17:07:32 +12:00
Bryan Berg
9217216723
Add CO device class to binary_sensor ( #3656 )
2022-08-02 11:32:02 +12:00
RoboMagus
936c408a58
List webserver service on MDNS if enabled. ( #3662 )
2022-08-02 11:31:06 +12:00
Samuel Sieb
54427eac9a
Update inkbird_ibsth1_mini.cpp ( #3664 )
2022-08-01 13:08:19 +12:00
Samuel Sieb
e809488cc0
Remove deprecated adc init call. ( #3667 )
2022-08-01 09:44:58 +12:00
DAVe3283
ed26c57d99
Rework NaN handling in sensor filters ( #3610 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-07-28 16:39:11 +12:00
piechade
2a49811f6e
Add support for SMT100 Soil Moisture Sensor ( #3654 )
...
Co-authored-by: Dennis Piecha <d.piecha@ymail.com>
2022-07-28 11:22:49 +12:00
Samuel Sieb
6a4e0cf667
add option to publish initial state of binary sensors ( #3636 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-07-25 15:55:32 +12:00
RoboMagus
04f4dd8a22
Add 'set_total_pulses' action to 'pulse_counter' sensor. ( #3640 )
2022-07-25 14:20:15 +12:00
Javier Peletier
f33d829ce9
FIX: NVS preferences being written even if unchanged ( #3647 )
2022-07-25 10:10:37 +12:00
RoboMagus
578671ea94
Fix configuration constants in core. ( #3652 )
2022-07-25 08:23:55 +12:00
Javier Peletier
d10300c330
modbus: fix queue deduplicator erasing custom commands ( #3650 )
2022-07-25 08:06:18 +12:00
Andreas Hergert
e0555e140f
Improvement pipsolar crc ( #3316 )
...
Co-authored-by: Andreas <andreas.hergert@otrs.com>
2022-07-07 12:54:19 +12:00
Luca Adrian L
093989406f
Added more sensor device classes ( #3624 )
2022-07-07 11:32:38 +12:00
dab0g
cdb16f08f6
Update dfplayer condition function name ( #3619 )
2022-07-04 09:22:04 +12:00
marshn
f7db9aaa9f
Fix slow_pwm output glitch ( #3601 )
2022-06-30 11:28:19 +02:00
Javier Peletier
435f972357
fix EDict to dict mapping in helpers.py ( #3599 )
2022-06-30 11:24:24 +02:00
Jesse Hills
bca96f91b2
Remove min_save_interval from intergration and total_daily_energy ( #3498 )
2022-06-30 16:47:56 +12:00
Benoit3
6f83a49c63
#3358 Correct temperature validity detection issue in some conditions of pu… ( #3545 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-06-29 21:30:44 +02:00
André Klitzing
72cce391ab
Fix some typos found by codespell ( #3598 )
2022-06-27 18:02:46 -03:00
Jesse Hills
f564be6aea
Do two substitutions passes to allow substitutions inside substitutions ( #3583 )
2022-06-22 08:21:32 +12:00
Zimmermann Zsolt
37b6d442bd
Correcting ESP32 flash save/load key calculation algorithm ( #3416 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Dr. Zimmermann Zsolt <cina@storage1.cina.hu>
2022-06-21 17:17:51 +12:00
Nick B
fb2467f6f0
DAC7678 support ( #3441 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-21 17:12:15 +12:00
dependabot[bot]
29045b0435
Bump pylint from 2.13.9 to 2.14.3 ( #3589 )
...
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-21 16:27:33 +12:00
Jesse Hills
311a48c64e
Bump platformio to 6.0.2 ( #3566 )
2022-06-21 11:53:51 +12:00
Mateus Demboski
01b3815f27
Map LOLIN C3 mini board pins ( #3587 )
2022-06-21 11:33:20 +12:00
Joe
b0d1c801bd
Fix 2 small issues in BLEClient ( #3544 )
2022-06-21 11:31:17 +12:00
RoboMagus
5aaac06f5b
RestoringGlobalsComponent: Store value on shutdown ( #3586 )
2022-06-21 11:27:53 +12:00
RoboMagus
34adbf0588
Fix / Reverse order shutdown ( #3585 )
2022-06-21 11:26:34 +12:00
Jesse Hills
0a4213182e
Merge branch 'release' into dev
2022-06-21 07:18:41 +12:00
Sergey Dudanov
b0c0258e70
Media Player: added play_media action ( #3579 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-20 12:17:20 +12:00
kahrendt
8110e591d0
Fix wrong type for voc_state*_ in sgp4x component ( #3581 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-20 11:27:00 +12:00
ShellAddicted
fe05d7aec1
Fix: Make MQTT over TLS actually work ( #3580 )
2022-06-20 11:17:58 +12:00
lkomurcu
57f5884070
Move gas mbus config option being a define to being a build flag since its used in external libraries. ( #3575 )
2022-06-20 07:39:40 +12:00
Jesse Hills
7c86f3fa9e
Bump version to 2022.6.1
2022-06-18 17:25:52 +12:00
Sergey Dudanov
203b8b01bf
Media Player: added triggers ( #3576 )
2022-06-18 17:25:51 +12:00
Benjamin Klotz
8a1034a92f
Bugfix for ExternalRAMAllocator copy constructor ( #3571 )
2022-06-18 17:25:51 +12:00
Jesse Hills
aa0c2dedd9
Setup the mute pin if configured ( #3568 )
2022-06-18 17:25:51 +12:00
Sergey Dudanov
d045908e05
Media Player: added triggers ( #3576 )
2022-06-18 17:21:42 +12:00
Guillermo Ruffino
f002a23d2d
Language schema 202204 ( #3492 )
2022-06-17 13:46:20 +12:00
gazoodle
29d6d0a906
Fix modbus user-defined function handling ( #3527 )
2022-06-17 13:35:25 +12:00
Benjamin Klotz
c8b58b5c23
Bugfix for ExternalRAMAllocator copy constructor ( #3571 )
2022-06-17 13:32:43 +12:00
Jesse Hills
01bfafc5f1
Setup the mute pin if configured ( #3568 )
2022-06-17 13:30:21 +12:00
Jesse Hills
2d1abaa68e
Bump version to 2022.6.0
2022-06-16 11:31:38 +12:00
Jesse Hills
94f6c6861a
Bump version to 2022.6.0b4
2022-06-14 20:41:46 +12:00
Martin
b1d614e6c4
Bm3xx: Fix typo ( #3559 )
2022-06-14 20:41:46 +12:00
André Klitzing
7fceb070e5
Fix compilation with ESP32-S3 ( #3543 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-14 20:41:46 +12:00
Martin
06440d0202
Bm3xx: Fix typo ( #3559 )
2022-06-14 20:38:09 +12:00
André Klitzing
0ecf9f4f2f
Fix compilation with ESP32-S3 ( #3543 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-14 20:36:38 +12:00
Jesse Hills
f3a25de11d
Bump version to 2022.6.0b3
2022-06-13 13:32:43 +12:00
Jesse Hills
041bef8bcd
Implement media player volume actions ( #3551 )
2022-06-13 13:32:43 +12:00
Jesse Hills
8998c5f6dd
Implement media player volume actions ( #3551 )
2022-06-13 13:28:55 +12:00
Jesse Hills
d2d4eb4eae
Bump version to 2022.6.0b2
2022-06-09 20:27:22 +12:00
Viktor Nagy
5942a3898c
Nextion brightness setting requires an assignment ( #3533 )
2022-06-09 20:27:22 +12:00
Samuel Sieb
93421f0fa7
publish fan speed count for discovery ( #3537 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-06-09 20:27:22 +12:00
RoboMagus
3a9ab50dd2
Refactor vl53l0x to remove code from header. ( #3536 )
2022-06-09 16:24:56 +12:00
Viktor Nagy
5abd91d6d5
Nextion brightness setting requires an assignment ( #3533 )
2022-06-09 16:20:05 +12:00
Samuel Sieb
c3da42516b
publish fan speed count for discovery ( #3537 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-06-09 15:27:04 +12:00
Jesse Hills
ec1fae6883
Bump version to 2022.7.0-dev
2022-06-08 22:46:20 +12:00
Jesse Hills
746fd1122f
Bump version to 2022.6.0b1
2022-06-08 22:46:20 +12:00
Jesse Hills
9663760ec5
Merge branch 'dev' into bump-2022.6.0b1
2022-06-08 22:46:20 +12:00
Wolfgang Tremmel
a3d73d1e23
RG15 data is float/double, not int ( #3512 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-08 22:34:50 +12:00
Jesse Hills
d63e14a4b6
Implement the media player actions ( #3534 )
2022-06-08 22:33:21 +12:00
DAVe3283
03944e6cd8
Fix bogus reading on no communication with MAX31865 ( #3505 )
2022-06-08 09:58:32 +12:00
Maurice Makaay
0d1028be2e
Cleanup deprecated EntityBase::hash_base() ( #3525 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-06-08 09:13:11 +12:00
VitaliyKurokhtin
6a85259e4d
Block Tuya light from reacting to dp changes if transitioning ( #3076 )
2022-06-07 23:07:08 +12:00
Maurice Makaay
ebca936b7e
Fix percentage validation for wrong data type input ( #3524 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-06-07 23:00:27 +12:00
Nicholas Peters
31c4551890
Fix sdp3x error checking ( #3531 )
2022-06-07 22:43:46 +12:00
Samuel Sieb
dd470d4197
support rotated ILI9341 (ILI9342) ( #3526 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-06-07 22:42:13 +12:00
Maurice Makaay
612822490b
Fix endless 'WiFi Unknown connection status 0' loop ( #3530 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-06-07 12:08:29 +12:00
Maurice Makaay
f8969605e8
Suppress first rotary encoder event ( #3532 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-06-07 11:36:54 +12:00
Carlos Garcia Saura
dd24ffa24e
Correct ADC auto-range for ESP32-S2 variant (13 bit adc) ( #3158 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-06-03 16:07:35 +12:00
guillempages
d0dda48932
Add display_type property to DisplayBuffer ( #3430 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-06-03 15:39:04 +12:00
Eric van Blokland
6349b5f654
Added RC6 protocol support ( #3514 )
2022-06-03 15:37:04 +12:00
Joe
a6ff02a3cf
Refactor clock syncing ( #3503 )
...
* Expose `send_local_time()` as public, for use in lambdas.
This will send the current time configured in `time_id`.
* Add a new `set_clock()` public method, separate from time_id.
This allows setting the clock manually, without syncing from a Time
Component. Again this can only be called from ESPHome; i.e.,
generally from a lambda.
2022-06-03 13:53:20 +12:00
jimtng
4f57bf786b
Add mqtt.on_connect and mqtt.on_disconnect triggers ( #3520 )
2022-06-03 13:51:50 +12:00
Jesse Hills
6221f6d47d
Implement Media Player and I2S Media player ( #3487 )
2022-06-02 17:00:17 +12:00
Wolfgang Tremmel
a922efeafa
Change rain intensity sensor string ( #3511 )
2022-05-31 16:49:18 +12:00
jimtng
5aa42e5e66
Add variable substitutions for !include ( #3510 )
2022-05-31 16:45:18 +12:00
Joe
708672ec7e
[BedJet] Add configurable heating strategy ( #3519 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-31 15:45:01 +12:00
Jan Grewe
d2cefbf224
Allow Prometheus component to export internal components ( #3508 )
...
Co-authored-by: Jan Grewe <jan.grewe@flixbus.com>
2022-05-31 07:29:57 +12:00
Michael Davidson
adb7aa6950
Thermostat preset with modes ( #3298 )
...
* Rework HOME/AWAY support to being driven via a map of ClimatePreset/ThermostatClimateTargetTempConfig
This opens up to theoretically being able to support other presets (ECO, SLEEP, etc)
* Add support for additional presets
Configuration takes the form;
```
climate:
platform: preset
...
preset:
[eco | away | boost | comfort | home | sleep | activity]:
default_target_temperature_low: 20
default_target_temperature_high: 24
```
These will be available in the Home Assistant UI and, like the existing Home/Away config will reset the temperature in line with these defaults when selected. The existing away_config/home_config is still respected (although preset->home/preset->away will be applied after them and override them if both styles are specified)
* Add support for specifying MODE, FAN_MODE and SWING_MODE on a preset
When switching presets these will implicitly flow through to the controller. However calls to climate.control which specify any of these will take precedence even when changing the mode (think of the preset version as the default for that preset)
* Add `preset_change` mode trigger
When defined this trigger will fire when the preset for the thermostat has been changed. The intent of this is similar to `auto_mode` - it's not intended to be used to control the preset's state (eg. communicate with the physical thermostat) but instead might be used to update a visual indicator, for instance.
* Apply lint, clang-format, and clang-tidy fixes
* Additional clang-format fixes
* Wrap log related strings in LOG_STR_ARG
* Add support for custom presets
This also changes the configuration syntax to;
```yaml
preset:
# Standard preset
- name: [eco | away | boost | comfort | home | sleep | activity]
default_target_temperature_low: 20
...
# Custom preset
- name: My custom preset
default_target_temperature_low: 18
```
For the end user there is no difference between a custom and built in preset. For developers custom presets are set via `climate.control` `custom_preset` property instead of the `preset`
* Lint/clang-format/clang-tidy fixes
* Additional lint/clang-format/clang-tidy fixes
* Clang-tidy changes
* Sort imports
* Improve configuration validation for presets
- Unify temperature validation across default, away, and preset configuration
- Validate modes for presets have the required actions
* Trigger a refresh after changing internals of the thermostat
* Apply formatting fixes
* Validate mode, fan_mode, and swing_mode on presets
* Add preset temperature validation against visual min/max configuration
* Apply code formatting fixes
* Fix preset temperature validation
2022-05-24 22:44:26 -05:00
Wumpf
cd35ead890
[scd4x] Fix not passing arguments to templatable value for perform_forced_calibration ( #3495 )
2022-05-24 13:00:06 +12:00
joseph douce
9dc804ee27
Output a true RMS voltage % ( #3494 )
2022-05-24 12:52:54 +12:00
Martin
a8ceeaa7b0
esp32: fix NVS ( #3497 )
2022-05-23 20:56:26 +12:00
Sergey Dudanov
7092f7663e
midea: New power_toggle action. Auto-use remote transmitter. ( #3496 )
2022-05-23 20:51:45 +12:00
Jesse Hills
d9d2edeb08
Fix compile issues on windows ( #3491 )
2022-05-19 21:21:42 +12:00
Jesse Hills
dda1ddcb26
Add missing import to bedjet ( #3490 )
2022-05-19 16:23:40 +12:00
Keilin Bickar
f0c890f160
Remove deprecated fan speeds ( #3397 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:50:44 +12:00
gazoodle
4f52d43347
add support user-defined modbus functions ( #3461 )
2022-05-19 12:49:12 +12:00
Martin
0ed7db979b
Add support for SGP41 ( #3382 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-19 12:47:33 +12:00
myml
9c78049359
feat: esp32-camera add stream event ( #3285 )
2022-05-19 12:23:50 +12:00
user897943
7882105661
Update bedjet_const.h to remove blank spaces before speed steps, fixes Unknown Error when using climate.set_fan_mode in HA ( #3476 )
2022-05-19 10:25:42 +12:00
Dave T
c000e1d6dd
Ili9341 8bit indexed mode pt1 ( #2490 )
2022-05-19 10:23:00 +12:00
Jesse Hills
282d9e138c
Revert adding spaces
2022-05-17 23:31:55 +12:00
Jesse Hills
72fcf2cbe1
Bump version to 2022.5.0b4
2022-05-17 23:23:37 +12:00
Samuel Sieb
6f49f5465b
Retry Tuya init commands ( #3482 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-05-17 23:23:33 +12:00
Martin
17b8bd8316
ESP32: Only save to NVS if data was changed ( #3479 )
2022-05-17 23:16:33 +12:00
Samuel Sieb
9b6b9c1fa2
Retry Tuya init commands ( #3482 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-05-17 20:15:02 +12:00
Martin
609a2ca592
ESP32: Only save to NVS if data was changed ( #3479 )
2022-05-17 10:59:36 +12:00
[pʲɵs]
6dabf24bf3
MQTT cover: send state even if position is available ( #3473 )
2022-05-16 15:35:27 +12:00
Jesse Hills
c707e64685
Bump version to 2022.5.0b3
2022-05-16 13:07:12 +12:00
Jesse Hills
a639690716
Mark improv_serial and ESP-IDF usb based serial on c3/s2/s3 unsupported ( #3477 )
2022-05-16 13:07:12 +12:00
[pʲɵs]
01222dbab7
Increase JSON buffer size on overflow ( #3475 )
2022-05-16 13:07:12 +12:00
Jesse Hills
93e2506279
Mark improv_serial and ESP-IDF usb based serial on c3/s2/s3 unsupported ( #3477 )
2022-05-16 13:05:20 +12:00
Maxim Ocheretianko
f62d5d3b9d
Add Tuya select ( #3469 )
2022-05-16 07:49:40 +12:00
Maxim Ocheretianko
0665acd190
Tuya status gpio support ( #3466 )
2022-05-16 07:44:14 +12:00
[pʲɵs]
fea05e9d33
Increase JSON buffer size on overflow ( #3475 )
2022-05-15 19:53:43 +12:00
Dave T
39c6c2417a
Remove duplicate convert_to_8bit_color_ function. ( #2469 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-05-12 22:18:51 +12:00
Jesse Hills
603d0d0c7c
Bump version to 2022.5.0b2
2022-05-12 17:00:14 +12:00
Brian Kaufman
28883f711b
Update captive portal canHandle function ( #3360 )
2022-05-12 17:00:13 +12:00
Michael Davidson
e914828add
Make custom_fan and custom_preset templatable as per documentation ( #3330 )
2022-05-12 17:00:13 +12:00
James Szalay
c1480029fb
Use heat mode for heat. Move EXT HT to custom presets. ( #3437 )
...
* Use heat mode for heat. Move EXT HT to custom presets.
* Fix syntax error.
2022-05-12 17:00:13 +12:00
Niclas Larsson
40f622949e
Shelly dimmer: Use unique_ptr to handle the lifetime of stm32_t ( #3400 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 17:00:13 +12:00
Maurice Makaay
63096ac2bc
On epoch sync, restore local TZ ( #3462 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-12 17:00:13 +12:00
Brian Kaufman
03d5a0ec1d
Update captive portal canHandle function ( #3360 )
2022-05-12 16:57:50 +12:00
Michael Davidson
1c873e0034
Make custom_fan and custom_preset templatable as per documentation ( #3330 )
2022-05-12 16:54:45 +12:00
swifty99
bcb47c306c
Tcs34725 automatic sampling settings for improved dynamics and accuracy ( #3258 )
...
Co-authored-by: Daniel Cousens <413395+dcousens@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 16:53:33 +12:00
James Szalay
01c4d3c225
Use heat mode for heat. Move EXT HT to custom presets. ( #3437 )
...
* Use heat mode for heat. Move EXT HT to custom presets.
* Fix syntax error.
2022-05-12 15:26:14 +12:00
Niclas Larsson
c2aaae4818
Shelly dimmer: Use unique_ptr to handle the lifetime of stm32_t ( #3400 )
...
Co-authored-by: Martin <25747549+martgras@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 10:26:51 +12:00
Maurice Makaay
3f678e218d
On epoch sync, restore local TZ ( #3462 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-12 09:25:00 +12:00
Jesse Hills
f8a1bd4e79
Bump version to 2022.6.0-dev
2022-05-11 12:50:42 +12:00
Jesse Hills
d6e039a1d1
Bump version to 2022.5.0b1
2022-05-11 12:50:42 +12:00
Jesse Hills
0f1a7c2b69
Merge branch 'dev' into bump-2022.5.0b1
2022-05-11 12:50:41 +12:00
Jesse Hills
40ad9f4911
Add deep_sleep.allow YAML action ( #3459 )
2022-05-11 12:47:50 +12:00
Ruben De Smet
4116caff6a
Implement allow_deep_sleep ( #3282 )
2022-05-11 11:44:52 +12:00
Otto Winter
0b69f72315
Enable api transport encryption for new projects ( #3142 )
...
* Enable api transport encryption for new projects
* Format
2022-05-11 11:38:05 +12:00
Maurice Makaay
c569f5ddcf
Code cleanup fixes for the number component ( #3458 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 11:02:49 +12:00
Maurice Makaay
62f9e181e0
Code cleanup fixes for the select component ( #3457 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-11 10:58:28 +12:00
Otto Winter
235a97ea10
Make retry scheduler efficient ( #3225 )
2022-05-11 07:54:00 +12:00
MFlasskamp
e541ae400c
Esp32c3 deepsleep fix ( #3454 )
2022-05-10 22:03:59 +12:00
Massimo Cetra
4822abde86
Fix BLE280 setup when the sensor is marked as failed. ( #3396 )
2022-05-10 22:03:40 +12:00
LuBeDa
69118120d9
added prev_frame for animation ( #3427 )
2022-05-10 21:56:29 +12:00
Dennis
7cba0c6fb0
Fix cover set position by force pushing position_id datapoint (simila… ( #3435 )
2022-05-10 21:42:31 +12:00
Felix Storm
5fac67ce15
CAN bus: on_frame remote_transmission_request ( #3376 )
2022-05-10 21:39:18 +12:00
Matthew Garrett
98c733108e
PMSX003: Add support for specifying the update interval and spinning down ( #3053 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-05-10 21:35:43 +12:00
Martin
782186e13d
extend scd4x ( #3409 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:25:44 +12:00
George
4e1f6518e8
Delonghi Penguino PAC W120HP ir support ( #3124 )
2022-05-10 21:22:22 +12:00
Andre Lengwenus
53e0fe8e51
Add SML (Smart Message Language) platform for energy meters ( #2396 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:05:49 +12:00
Martin
0e547390da
add support for Sen5x sensor series ( #3383 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 20:15:02 +12:00
Martin
86b52df839
tca9548a fix channel selection ( #3417 )
2022-05-10 17:17:55 +12:00
MFlasskamp
d685fdf54a
mask deprecated adc_gpio_init() for esp32-s2 ( #3445 )
2022-05-10 17:16:16 +12:00
Maurice Makaay
d9caab4108
Number enhancement ( #3429 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 16:58:56 +12:00
Maurice Makaay
44b68f140e
Select enhancement ( #3423 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
2022-05-10 16:41:16 +12:00
Unai
3a3d97dfa7
Add SERIAL_JTAG/CDC logger option for ESP-IDF platform for ESP32-S2/S3/C3 ( #3105 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 13:28:22 +12:00
MFlasskamp
47898b527c
Esp32c3 deepsleep fix ( #3433 )
2022-05-09 20:32:14 +12:00
Jesse Hills
df999723f8
Force using name substitution when adopting a device ( #3451 )
2022-05-09 19:43:09 +12:00
Jesse Hills
8236e840a7
Fix spi transfer with miso pin defined on espidf ( #3450 )
2022-05-09 19:24:27 +12:00
Jesse Hills
2e4645310b
Also rename yaml filename with rename command ( #3447 )
2022-05-09 19:16:46 +12:00
Ingo Theiss
50a32b387e
Add ENS210 Humidity & Temperature sensor component ( #2942 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:23:38 +12:00
rainero84
2059283707
Early pin init ( #3439 )
...
* Added early_pin_init configuration parameter for ESP8266 platform
* Added #include to core
* Updated test3.yaml to include early_pin_init parameter
Co-authored-by: Rainer Oellermann <ro@playplaycode.com>
2022-05-09 17:21:43 +12:00
Patrick van der Leer
8e3af515c9
Waveshare epaper 7in5 v2alt ( #3276 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:17:36 +12:00
Jens-Christian Skibakk
d2f37cf3f9
Support for Arduino 2 and serial port on ESP32-S2 and ESP32-C3 ( #3436 )
2022-05-09 16:17:22 +12:00
Paulus Schoutsen
7c30d6254e
Add rename command handler ( #3443 )
2022-05-09 13:53:34 +12:00
Jesse Hills
64fb39a653
Add help text to rename command ( #3442 )
2022-05-09 10:18:24 +12:00
Dan Jackson
91895aa70c
Allow wifi output_power down to 8.5dB ( #3405 )
2022-05-03 19:09:06 +12:00
LuBeDa
68dfaf238b
added RGB565 image type ( #3229 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-27 08:41:10 +12:00
Trevor North
ebf13a0ba0
Queue sensor publishes so we don't block for too long ( #3422 )
2022-04-27 07:51:22 +12:00
code-review-doctor
2bff9937b7
Fix issue probably-meant-fstring found at https://codereview.doctor ( #3415 )
2022-04-27 07:43:35 +12:00
Jesse Hills
256395c28d
Add duration device class for sensors ( #3421 )
2022-04-26 21:02:08 +12:00
Martin
6fe22a7e62
SPS30: Add fan action ( #3410 )
...
* Add fan action to SPS30
* add codeowner
2022-04-26 09:50:36 +12:00
Jesse Hills
757b98748b
Add "esphome rename" command ( #3403 )
...
* Add "esphome rename" command
* Only open file once
* Update esphome/__main__.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Add final return
* Use match.group consistently
* Validate name characters
* Add whitespace to regex so it is only replacing exact match
* Validate yaml config file after manipulation
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
2022-04-21 22:08:01 -07:00
I. Tomita
7a778f3f33
Add support for BL0939 (Sonoff Dual R3 V2 powermeter) ( #3300 )
2022-04-21 10:11:25 +12:00
Jesse Hills
e26e0d7c01
Bump version to 2022.4.0b4
2022-04-20 16:35:43 +12:00
Jesse Hills
ad41c07a1f
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 16:35:42 +12:00
James Duke
9576d246ee
Add support for Mopeka Pro+ Residential sensor ( #3393 )
...
* Add support for Pro+ Residential sensor (enum)
The Mopeka Pro+ Residential sensor is very similar to the Pro sensor, but includes a longer range antenna, and maybe hardware? The Pro+ identifies itself with 0x08 sensor type.
* Add logic to support Pro+ Residential sensor
* Fix formatting
2022-04-20 12:50:24 +12:00
parats15
988d3ea8ba
Multi conf for Teleinfo component ( #3401 )
2022-04-20 12:46:55 +12:00
Jesse Hills
0767b92b62
Dont require {} for wifi ap with defaults ( #3404 )
2022-04-20 06:56:09 +12:00
Jesse Hills
712115b6ce
Bump version to 2022.4.0b3
2022-04-19 12:33:38 +12:00
rnauber
9283559c6b
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 12:33:38 +12:00
Michel van de Wetering
6b393438e9
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 12:33:38 +12:00
rnauber
2064abe16d
Shelly Dimmer: Delete obsolete LICENSE.txt ( #3394 )
2022-04-19 08:43:34 +12:00
Michel van de Wetering
b605982f94
Fix power_delivered/produced_phase sensor deviceclass in DSMR ( #3395 )
2022-04-19 08:42:02 +12:00
Jesse Hills
dcb226b202
Bump version to 2022.4.0b2
2022-04-14 13:48:35 +12:00
Janez Troha
2243021b58
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:48:35 +12:00
rnauber
d5134e88b1
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:48:35 +12:00
matthias882
c59adf612f
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 13:48:35 +12:00
Janez Troha
93b628d9a8
Allocate smaller amount of buffer for JSON ( #3384 )
2022-04-14 13:42:43 +12:00
Joe
6bac551d9f
Add BedJet BLE climate component ( #2452 )
2022-04-14 13:16:13 +12:00
rnauber
70a35656e4
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:13:51 +12:00
Jesse Hills
047c18eac0
Add default object_id_generator for mqtt ( #3389 )
2022-04-14 11:25:31 +12:00
matthias882
b4a86ce6cf
Changes accuracy of single cell voltage ( #3387 )
2022-04-14 09:36:16 +12:00
Jesse Hills
b778eed419
Bump version to 2022.5.0-dev
2022-04-13 13:42:28 +12:00
Jesse Hills
ad57faa9a9
Bump version to 2022.4.0b1
2022-04-13 13:42:28 +12:00
Jesse Hills
a9b5e8d036
Merge branch 'dev' into bump-2022.4.0b1
2022-04-13 13:42:27 +12:00
Jesse Hills
8be704e591
Allow specifying deep sleep wakup clock time ( #3312 )
2022-04-13 12:55:26 +12:00
Jesse Hills
b622a8fa58
Move PN532OnTagTrigger to nfc::NfcOnTagTrigger ( #3379 )
2022-04-13 12:26:55 +12:00
Jesse Hills
a519e5c475
Fix silent config errors ( #3380 )
2022-04-13 12:26:25 +12:00
Martin
d620b6dd5e
Refactor Sensirion Sensors ( #3374 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:19:48 +12:00
Janez Troha
99335d986e
Use correct http defines ( #3378 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 10:14:21 +12:00
cvwillegen
7895cd92cd
Remote base pronto receive ( #2826 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-13 07:39:38 +12:00
anatoly-savchenkov
8b2c032da6
Add Sonoff D1 Dimmer support ( #2775 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-12 17:03:32 +12:00
Jesse Hills
da336247eb
Add Xiaomi RTCGQ02LM - Mi Motion Sensor 2 ( #3186 )
2022-04-12 16:19:16 +12:00
andrewpc
dabd27d4be
Addition of Deep Sleep RTC pin definition for ESP32-S2 ( #3303 )
2022-04-12 12:45:54 +12:00
functionpointer
fdda47db6e
Add integration hydreon_rgxx for rain sensors by Hydreon ( #2711 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-11 14:50:56 +12:00
Jesse Hills
efa6fd03e5
Make home_assistant imported sensors internal by default ( #3372 )
2022-04-11 12:45:15 +12:00
rrooggiieerr
9e3e34acf5
Add cover toggle support to endstop cover ( #3358 )
2022-04-11 10:55:45 +12:00
calco88
a2d0c1bf18
Fix HM3301 AQI int8 overflow ( #3361 )
2022-04-11 10:14:53 +12:00
RadekHvizdos
2b91c23bf3
Extend mcp3204 to support 8 channels (mcp3208 variant) ( #3332 )
2022-04-11 08:44:11 +12:00
Samuel Sieb
3297267a16
Fix SHTC3 sensor detection ( #3365 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2022-04-11 08:42:31 +12:00
